Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 374 insertions, 0 deletions

diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
new file mode 100644
index 000000000..eb1ba6319
--- /dev/null
+++ b/drivers/bus/omap_l3_noc.c
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * OMAP L3 Interconnect error handling driver
+ *
+ * Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *	Sricharan <r.sricharan@ti.com>
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "omap_l3_noc.h"
+
+/**
+ * l3_handle_target() - Handle Target specific parse and reporting
+ * @l3:		pointer to l3 struct
+ * @base:	base address of clkdm
+ * @flag_mux:	flagmux corresponding to the event
+ * @err_src:	error source index of the slave (target)
+ *
+ * This does the second part of the error interrupt handling:
+ *	3) Parse in the slave information
+ *	4) Print the logged information.
+ *	5) Add dump stack to provide kernel trace.
+ *	6) Clear the source if known.
+ *
+ * This handles two types of errors:
+ *	1) Custom errors in L3 :
+ *		Target like DMM/FW/EMIF generates SRESP=ERR error
+ *	2) Standard L3 error:
+ *		- Unsupported CMD.
+ *			L3 tries to access target while it is idle
+ *		- OCP disconnect.
+ *		- Address hole error:
+ *			If DSS/ISS/FDIF/USBHOSTFS access a target where they
+ *			do not have connectivity, the error is logged in
+ *			their default target which is DMM2.
+ *
+ *	On High Secure devices, firewall errors are possible and those
+ *	can be trapped as well. But the trapping is implemented as part
+ *	secure software and hence need not be implemented here.
+ */
+static int l3_handle_target(struct omap_l3 *l3, void __iomem *base,
+			    struct l3_flagmux_data *flag_mux, int err_src)
+{
+	int k;
+	u32 std_err_main, clear, masterid;
+	u8 op_code, m_req_info;
+	void __iomem *l3_targ_base;
+	void __iomem *l3_targ_stderr, *l3_targ_slvofslsb, *l3_targ_mstaddr;
+	void __iomem *l3_targ_hdr, *l3_targ_info;
+	struct l3_target_data *l3_targ_inst;
+	struct l3_masters_data *master;
+	char *target_name, *master_name = "UN IDENTIFIED";
+	char *err_description;
+	char err_string[30] = { 0 };
+	char info_string[60] = { 0 };
+
+	/* We DONOT expect err_src to go out of bounds */
+	BUG_ON(err_src > MAX_CLKDM_TARGETS);
+
+	if (err_src < flag_mux->num_targ_data) {
+		l3_targ_inst = &flag_mux->l3_targ[err_src];
+		target_name = l3_targ_inst->name;
+		l3_targ_base = base + l3_targ_inst->offset;
+	} else {
+		target_name = L3_TARGET_NOT_SUPPORTED;
+	}
+
+	if (target_name == L3_TARGET_NOT_SUPPORTED)
+		return -ENODEV;
+
+	/* Read the stderrlog_main_source from clk domain */
+	l3_targ_stderr = l3_targ_base + L3_TARG_STDERRLOG_MAIN;
+	l3_targ_slvofslsb = l3_targ_base + L3_TARG_STDERRLOG_SLVOFSLSB;
+
+	std_err_main = readl_relaxed(l3_targ_stderr);
+
+	switch (std_err_main & CUSTOM_ERROR) {
+	case STANDARD_ERROR:
+		err_description = "Standard";
+		snprintf(err_string, sizeof(err_string),
+			 ": At Address: 0x%08X ",
+			 readl_relaxed(l3_targ_slvofslsb));
+
+		l3_targ_mstaddr = l3_targ_base + L3_TARG_STDERRLOG_MSTADDR;
+		l3_targ_hdr = l3_targ_base + L3_TARG_STDERRLOG_HDR;
+		l3_targ_info = l3_targ_base + L3_TARG_STDERRLOG_INFO;
+		break;
+
+	case CUSTOM_ERROR:
+		err_description = "Custom";
+
+		l3_targ_mstaddr = l3_targ_base +
+				  L3_TARG_STDERRLOG_CINFO_MSTADDR;
+		l3_targ_hdr = l3_targ_base + L3_TARG_STDERRLOG_CINFO_OPCODE;
+		l3_targ_info = l3_targ_base + L3_TARG_STDERRLOG_CINFO_INFO;
+		break;
+
+	default:
+		/* Nothing to be handled here as of now */
+		return 0;
+	}
+
+	/* STDERRLOG_MSTADDR Stores the NTTP master address. */
+	masterid = (readl_relaxed(l3_targ_mstaddr) &
+		    l3->mst_addr_mask) >> __ffs(l3->mst_addr_mask);
+
+	for (k = 0, master = l3->l3_masters; k < l3->num_masters;
+	     k++, master++) {
+		if (masterid == master->id) {
+			master_name = master->name;
+			break;
+		}
+	}
+
+	op_code = readl_relaxed(l3_targ_hdr) & 0x7;
+
+	m_req_info = readl_relaxed(l3_targ_info) & 0xF;
+	snprintf(info_string, sizeof(info_string),
+		 ": %s in %s mode during %s access",
+		 (m_req_info & BIT(0)) ? "Opcode Fetch" : "Data Access",
+		 (m_req_info & BIT(1)) ? "Supervisor" : "User",
+		 (m_req_info & BIT(3)) ? "Debug" : "Functional");
+
+	WARN(true,
+	     "%s:L3 %s Error: MASTER %s TARGET %s (%s)%s%s\n",
+	     dev_name(l3->dev),
+	     err_description,
+	     master_name, target_name,
+	     l3_transaction_type[op_code],
+	     err_string, info_string);
+
+	/* clear the std error log*/
+	clear = std_err_main | CLEAR_STDERR_LOG;
+	writel_relaxed(clear, l3_targ_stderr);
+
+	return 0;
+}
+
+/**
+ * l3_interrupt_handler() - interrupt handler for l3 events
+ * @irq:	irq number
+ * @_l3:	pointer to l3 structure
+ *
+ * Interrupt Handler for L3 error detection.
+ *	1) Identify the L3 clockdomain partition to which the error belongs to.
+ *	2) Identify the slave where the error information is logged
+ *	... handle the slave event..
+ *	7) if the slave is unknown, mask out the slave.
+ */
+static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
+{
+	struct omap_l3 *l3 = _l3;
+	int inttype, i, ret;
+	int err_src = 0;
+	u32 err_reg, mask_val;
+	void __iomem *base, *mask_reg;
+	struct l3_flagmux_data *flag_mux;
+
+	/* Get the Type of interrupt */
+	inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
+
+	for (i = 0; i < l3->num_modules; i++) {
+		/*
+		 * Read the regerr register of the clock domain
+		 * to determine the source
+		 */
+		base = l3->l3_base[i];
+		flag_mux = l3->l3_flagmux[i];
+		err_reg = readl_relaxed(base + flag_mux->offset +
+					L3_FLAGMUX_REGERR0 + (inttype << 3));
+
+		err_reg &= ~(inttype ? flag_mux->mask_app_bits :
+				flag_mux->mask_dbg_bits);
+
+		/* Get the corresponding error and analyse */
+		if (err_reg) {
+			/* Identify the source from control status register */
+			err_src = __ffs(err_reg);
+
+			ret = l3_handle_target(l3, base, flag_mux, err_src);
+
+			/*
+			 * Certain plaforms may have "undocumented" status
+			 * pending on boot. So dont generate a severe warning
+			 * here. Just mask it off to prevent the error from
+			 * reoccuring and locking up the system.
+			 */
+			if (ret) {
+				dev_err(l3->dev,
+					"L3 %s error: target %d mod:%d %s\n",
+					inttype ? "debug" : "application",
+					err_src, i, "(unclearable)");
+
+				mask_reg = base + flag_mux->offset +
+					   L3_FLAGMUX_MASK0 + (inttype << 3);
+				mask_val = readl_relaxed(mask_reg);
+				mask_val &= ~(1 << err_src);
+				writel_relaxed(mask_val, mask_reg);
+
+				/* Mark these bits as to be ignored */
+				if (inttype)
+					flag_mux->mask_app_bits |= 1 << err_src;
+				else
+					flag_mux->mask_dbg_bits |= 1 << err_src;
+			}
+
+			/* Error found so break the for loop */
+			return IRQ_HANDLED;
+		}
+	}
+
+	dev_err(l3->dev, "L3 %s IRQ not handled!!\n",
+		inttype ? "debug" : "application");
+
+	return IRQ_NONE;
+}
+
+static const struct of_device_id l3_noc_match[] = {
+	{.compatible = "ti,omap4-l3-noc", .data = &omap4_l3_data},
+	{.compatible = "ti,omap5-l3-noc", .data = &omap5_l3_data},
+	{.compatible = "ti,dra7-l3-noc", .data = &dra_l3_data},
+	{.compatible = "ti,am4372-l3-noc", .data = &am4372_l3_data},
+	{},
+};
+MODULE_DEVICE_TABLE(of, l3_noc_match);
+
+static int omap_l3_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *of_id;
+	static struct omap_l3 *l3;
+	int ret, i, res_idx;
+
+	of_id = of_match_device(l3_noc_match, &pdev->dev);
+	if (!of_id) {
+		dev_err(&pdev->dev, "OF data missing\n");
+		return -EINVAL;
+	}
+
+	l3 = devm_kzalloc(&pdev->dev, sizeof(*l3), GFP_KERNEL);
+	if (!l3)
+		return -ENOMEM;
+
+	memcpy(l3, of_id->data, sizeof(*l3));
+	l3->dev = &pdev->dev;
+	platform_set_drvdata(pdev, l3);
+
+	/* Get mem resources */
+	for (i = 0, res_idx = 0; i < l3->num_modules; i++) {
+		struct resource	*res;
+
+		if (l3->l3_base[i] == L3_BASE_IS_SUBMODULE) {
+			/* First entry cannot be submodule */
+			BUG_ON(i == 0);
+			l3->l3_base[i] = l3->l3_base[i - 1];
+			continue;
+		}
+		res = platform_get_resource(pdev, IORESOURCE_MEM, res_idx);
+		l3->l3_base[i] = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(l3->l3_base[i])) {
+			dev_err(l3->dev, "ioremap %d failed\n", i);
+			return PTR_ERR(l3->l3_base[i]);
+		}
+		res_idx++;
+	}
+
+	/*
+	 * Setup interrupt Handlers
+	 */
+	l3->debug_irq = platform_get_irq(pdev, 0);
+	ret = devm_request_irq(l3->dev, l3->debug_irq, l3_interrupt_handler,
+			       IRQF_NO_THREAD, "l3-dbg-irq", l3);
+	if (ret) {
+		dev_err(l3->dev, "request_irq failed for %d\n",
+			l3->debug_irq);
+		return ret;
+	}
+
+	l3->app_irq = platform_get_irq(pdev, 1);
+	ret = devm_request_irq(l3->dev, l3->app_irq, l3_interrupt_handler,
+			       IRQF_NO_THREAD, "l3-app-irq", l3);
+	if (ret)
+		dev_err(l3->dev, "request_irq failed for %d\n", l3->app_irq);
+
+	return ret;
+}
+
+#ifdef	CONFIG_PM_SLEEP
+
+/**
+ * l3_resume_noirq() - resume function for l3_noc
+ * @dev:	pointer to l3_noc device structure
+ *
+ * We only have the resume handler only since we
+ * have already maintained the delta register
+ * configuration as part of configuring the system
+ */
+static int l3_resume_noirq(struct device *dev)
+{
+	struct omap_l3 *l3 = dev_get_drvdata(dev);
+	int i;
+	struct l3_flagmux_data *flag_mux;
+	void __iomem *base, *mask_regx = NULL;
+	u32 mask_val;
+
+	for (i = 0; i < l3->num_modules; i++) {
+		base = l3->l3_base[i];
+		flag_mux = l3->l3_flagmux[i];
+		if (!flag_mux->mask_app_bits && !flag_mux->mask_dbg_bits)
+			continue;
+
+		mask_regx = base + flag_mux->offset + L3_FLAGMUX_MASK0 +
+			   (L3_APPLICATION_ERROR << 3);
+		mask_val = readl_relaxed(mask_regx);
+		mask_val &= ~(flag_mux->mask_app_bits);
+
+		writel_relaxed(mask_val, mask_regx);
+		mask_regx = base + flag_mux->offset + L3_FLAGMUX_MASK0 +
+			   (L3_DEBUG_ERROR << 3);
+		mask_val = readl_relaxed(mask_regx);
+		mask_val &= ~(flag_mux->mask_dbg_bits);
+
+		writel_relaxed(mask_val, mask_regx);
+	}
+
+	/* Dummy read to force OCP barrier */
+	if (mask_regx)
+		(void)readl(mask_regx);
+
+	return 0;
+}
+
+static const struct dev_pm_ops l3_dev_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, l3_resume_noirq)
+};
+
+#define L3_DEV_PM_OPS (&l3_dev_pm_ops)
+#else
+#define L3_DEV_PM_OPS NULL
+#endif
+
+static struct platform_driver omap_l3_driver = {
+	.probe		= omap_l3_probe,
+	.driver		= {
+		.name		= "omap_l3_noc",
+		.pm		= L3_DEV_PM_OPS,
+		.of_match_table = of_match_ptr(l3_noc_match),
+	},
+};
+
+static int __init omap_l3_init(void)
+{
+	return platform_driver_register(&omap_l3_driver);
+}
+postcore_initcall_sync(omap_l3_init);
+
+static void __exit omap_l3_exit(void)
+{
+	platform_driver_unregister(&omap_l3_driver);
+}
+module_exit(omap_l3_exit);
+
+MODULE_AUTHOR("Santosh Shilimkar");
+MODULE_AUTHOR("Sricharan R");
+MODULE_DESCRIPTION("OMAP L3 Interconnect error handling driver");
+MODULE_LICENSE("GPL v2");