Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 389 insertions, 0 deletions

diff --git a/drivers/bus/qcom-ssc-block-bus.c b/drivers/bus/qcom-ssc-block-bus.c
new file mode 100644
index 000000000..eedeb29a5
--- /dev/null
+++ b/drivers/bus/qcom-ssc-block-bus.c
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2021, Michael Srba
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* AXI Halt Register Offsets */
+#define AXI_HALTREQ_REG			0x0
+#define AXI_HALTACK_REG			0x4
+#define AXI_IDLE_REG			0x8
+
+#define SSCAON_CONFIG0_CLAMP_EN_OVRD		BIT(4)
+#define SSCAON_CONFIG0_CLAMP_EN_OVRD_VAL	BIT(5)
+
+static const char *const qcom_ssc_block_pd_names[] = {
+	"ssc_cx",
+	"ssc_mx"
+};
+
+struct qcom_ssc_block_bus_data {
+	const char *const *pd_names;
+	struct device *pds[ARRAY_SIZE(qcom_ssc_block_pd_names)];
+	char __iomem *reg_mpm_sscaon_config0;
+	char __iomem *reg_mpm_sscaon_config1;
+	struct regmap *halt_map;
+	struct clk *xo_clk;
+	struct clk *aggre2_clk;
+	struct clk *gcc_im_sleep_clk;
+	struct clk *aggre2_north_clk;
+	struct clk *ssc_xo_clk;
+	struct clk *ssc_ahbs_clk;
+	struct reset_control *ssc_bcr;
+	struct reset_control *ssc_reset;
+	u32 ssc_axi_halt;
+	int num_pds;
+};
+
+static void reg32_set_bits(char __iomem *reg, u32 value)
+{
+	u32 tmp = ioread32(reg);
+
+	iowrite32(tmp | value, reg);
+}
+
+static void reg32_clear_bits(char __iomem *reg, u32 value)
+{
+	u32 tmp = ioread32(reg);
+
+	iowrite32(tmp & (~value), reg);
+}
+
+static int qcom_ssc_block_bus_init(struct device *dev)
+{
+	int ret;
+
+	struct qcom_ssc_block_bus_data *data = dev_get_drvdata(dev);
+
+	ret = clk_prepare_enable(data->xo_clk);
+	if (ret) {
+		dev_err(dev, "error enabling xo_clk: %d\n", ret);
+		goto err_xo_clk;
+	}
+
+	ret = clk_prepare_enable(data->aggre2_clk);
+	if (ret) {
+		dev_err(dev, "error enabling aggre2_clk: %d\n", ret);
+		goto err_aggre2_clk;
+	}
+
+	ret = clk_prepare_enable(data->gcc_im_sleep_clk);
+	if (ret) {
+		dev_err(dev, "error enabling gcc_im_sleep_clk: %d\n", ret);
+		goto err_gcc_im_sleep_clk;
+	}
+
+	/*
+	 * We need to intervene here because the HW logic driving these signals cannot handle
+	 * initialization after power collapse by itself.
+	 */
+	reg32_clear_bits(data->reg_mpm_sscaon_config0,
+			 SSCAON_CONFIG0_CLAMP_EN_OVRD | SSCAON_CONFIG0_CLAMP_EN_OVRD_VAL);
+	/* override few_ack/rest_ack */
+	reg32_clear_bits(data->reg_mpm_sscaon_config1, BIT(31));
+
+	ret = clk_prepare_enable(data->aggre2_north_clk);
+	if (ret) {
+		dev_err(dev, "error enabling aggre2_north_clk: %d\n", ret);
+		goto err_aggre2_north_clk;
+	}
+
+	ret = reset_control_deassert(data->ssc_reset);
+	if (ret) {
+		dev_err(dev, "error deasserting ssc_reset: %d\n", ret);
+		goto err_ssc_reset;
+	}
+
+	ret = reset_control_deassert(data->ssc_bcr);
+	if (ret) {
+		dev_err(dev, "error deasserting ssc_bcr: %d\n", ret);
+		goto err_ssc_bcr;
+	}
+
+	regmap_write(data->halt_map, data->ssc_axi_halt + AXI_HALTREQ_REG, 0);
+
+	ret = clk_prepare_enable(data->ssc_xo_clk);
+	if (ret) {
+		dev_err(dev, "error deasserting ssc_xo_clk: %d\n", ret);
+		goto err_ssc_xo_clk;
+	}
+
+	ret = clk_prepare_enable(data->ssc_ahbs_clk);
+	if (ret) {
+		dev_err(dev, "error deasserting ssc_ahbs_clk: %d\n", ret);
+		goto err_ssc_ahbs_clk;
+	}
+
+	return 0;
+
+err_ssc_ahbs_clk:
+	clk_disable(data->ssc_xo_clk);
+
+err_ssc_xo_clk:
+	regmap_write(data->halt_map, data->ssc_axi_halt + AXI_HALTREQ_REG, 1);
+
+	reset_control_assert(data->ssc_bcr);
+
+err_ssc_bcr:
+	reset_control_assert(data->ssc_reset);
+
+err_ssc_reset:
+	clk_disable(data->aggre2_north_clk);
+
+err_aggre2_north_clk:
+	reg32_set_bits(data->reg_mpm_sscaon_config0, BIT(4) | BIT(5));
+	reg32_set_bits(data->reg_mpm_sscaon_config1, BIT(31));
+
+	clk_disable(data->gcc_im_sleep_clk);
+
+err_gcc_im_sleep_clk:
+	clk_disable(data->aggre2_clk);
+
+err_aggre2_clk:
+	clk_disable(data->xo_clk);
+
+err_xo_clk:
+	return ret;
+}
+
+static void qcom_ssc_block_bus_deinit(struct device *dev)
+{
+	int ret;
+
+	struct qcom_ssc_block_bus_data *data = dev_get_drvdata(dev);
+
+	clk_disable(data->ssc_xo_clk);
+	clk_disable(data->ssc_ahbs_clk);
+
+	ret = reset_control_assert(data->ssc_bcr);
+	if (ret)
+		dev_err(dev, "error asserting ssc_bcr: %d\n", ret);
+
+	regmap_write(data->halt_map, data->ssc_axi_halt + AXI_HALTREQ_REG, 1);
+
+	reg32_set_bits(data->reg_mpm_sscaon_config1, BIT(31));
+	reg32_set_bits(data->reg_mpm_sscaon_config0, BIT(4) | BIT(5));
+
+	ret = reset_control_assert(data->ssc_reset);
+	if (ret)
+		dev_err(dev, "error asserting ssc_reset: %d\n", ret);
+
+	clk_disable(data->gcc_im_sleep_clk);
+
+	clk_disable(data->aggre2_north_clk);
+
+	clk_disable(data->aggre2_clk);
+	clk_disable(data->xo_clk);
+}
+
+static int qcom_ssc_block_bus_pds_attach(struct device *dev, struct device **pds,
+					 const char *const *pd_names, size_t num_pds)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i < num_pds; i++) {
+		pds[i] = dev_pm_domain_attach_by_name(dev, pd_names[i]);
+		if (IS_ERR_OR_NULL(pds[i])) {
+			ret = PTR_ERR(pds[i]) ? : -ENODATA;
+			goto unroll_attach;
+		}
+	}
+
+	return num_pds;
+
+unroll_attach:
+	for (i--; i >= 0; i--)
+		dev_pm_domain_detach(pds[i], false);
+
+	return ret;
+};
+
+static void qcom_ssc_block_bus_pds_detach(struct device *dev, struct device **pds, size_t num_pds)
+{
+	int i;
+
+	for (i = 0; i < num_pds; i++)
+		dev_pm_domain_detach(pds[i], false);
+}
+
+static int qcom_ssc_block_bus_pds_enable(struct device **pds, size_t num_pds)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i < num_pds; i++) {
+		dev_pm_genpd_set_performance_state(pds[i], INT_MAX);
+		ret = pm_runtime_get_sync(pds[i]);
+		if (ret < 0)
+			goto unroll_pd_votes;
+	}
+
+	return 0;
+
+unroll_pd_votes:
+	for (i--; i >= 0; i--) {
+		dev_pm_genpd_set_performance_state(pds[i], 0);
+		pm_runtime_put(pds[i]);
+	}
+
+	return ret;
+};
+
+static void qcom_ssc_block_bus_pds_disable(struct device **pds, size_t num_pds)
+{
+	int i;
+
+	for (i = 0; i < num_pds; i++) {
+		dev_pm_genpd_set_performance_state(pds[i], 0);
+		pm_runtime_put(pds[i]);
+	}
+}
+
+static int qcom_ssc_block_bus_probe(struct platform_device *pdev)
+{
+	struct qcom_ssc_block_bus_data *data;
+	struct device_node *np = pdev->dev.of_node;
+	struct of_phandle_args halt_args;
+	struct resource *res;
+	int ret;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, data);
+
+	data->pd_names = qcom_ssc_block_pd_names;
+	data->num_pds = ARRAY_SIZE(qcom_ssc_block_pd_names);
+
+	/* power domains */
+	ret = qcom_ssc_block_bus_pds_attach(&pdev->dev, data->pds, data->pd_names, data->num_pds);
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret, "error when attaching power domains\n");
+
+	ret = qcom_ssc_block_bus_pds_enable(data->pds, data->num_pds);
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret, "error when enabling power domains\n");
+
+	/* low level overrides for when the HW logic doesn't "just work" */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpm_sscaon_config0");
+	data->reg_mpm_sscaon_config0 = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->reg_mpm_sscaon_config0))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->reg_mpm_sscaon_config0),
+				     "Failed to ioremap mpm_sscaon_config0\n");
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpm_sscaon_config1");
+	data->reg_mpm_sscaon_config1 = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->reg_mpm_sscaon_config1))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->reg_mpm_sscaon_config1),
+				     "Failed to ioremap mpm_sscaon_config1\n");
+
+	/* resets */
+	data->ssc_bcr = devm_reset_control_get_exclusive(&pdev->dev, "ssc_bcr");
+	if (IS_ERR(data->ssc_bcr))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->ssc_bcr),
+				     "Failed to acquire reset: scc_bcr\n");
+
+	data->ssc_reset = devm_reset_control_get_exclusive(&pdev->dev, "ssc_reset");
+	if (IS_ERR(data->ssc_reset))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->ssc_reset),
+				     "Failed to acquire reset: ssc_reset:\n");
+
+	/* clocks */
+	data->xo_clk = devm_clk_get(&pdev->dev, "xo");
+	if (IS_ERR(data->xo_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->xo_clk),
+				     "Failed to get clock: xo\n");
+
+	data->aggre2_clk = devm_clk_get(&pdev->dev, "aggre2");
+	if (IS_ERR(data->aggre2_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->aggre2_clk),
+				     "Failed to get clock: aggre2\n");
+
+	data->gcc_im_sleep_clk = devm_clk_get(&pdev->dev, "gcc_im_sleep");
+	if (IS_ERR(data->gcc_im_sleep_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->gcc_im_sleep_clk),
+				     "Failed to get clock: gcc_im_sleep\n");
+
+	data->aggre2_north_clk = devm_clk_get(&pdev->dev, "aggre2_north");
+	if (IS_ERR(data->aggre2_north_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->aggre2_north_clk),
+				     "Failed to get clock: aggre2_north\n");
+
+	data->ssc_xo_clk = devm_clk_get(&pdev->dev, "ssc_xo");
+	if (IS_ERR(data->ssc_xo_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->ssc_xo_clk),
+				     "Failed to get clock: ssc_xo\n");
+
+	data->ssc_ahbs_clk = devm_clk_get(&pdev->dev, "ssc_ahbs");
+	if (IS_ERR(data->ssc_ahbs_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->ssc_ahbs_clk),
+				     "Failed to get clock: ssc_ahbs\n");
+
+	ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node, "qcom,halt-regs", 1, 0,
+					       &halt_args);
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret, "Failed to parse qcom,halt-regs\n");
+
+	data->halt_map = syscon_node_to_regmap(halt_args.np);
+	of_node_put(halt_args.np);
+	if (IS_ERR(data->halt_map))
+		return PTR_ERR(data->halt_map);
+
+	data->ssc_axi_halt = halt_args.args[0];
+
+	qcom_ssc_block_bus_init(&pdev->dev);
+
+	of_platform_populate(np, NULL, NULL, &pdev->dev);
+
+	return 0;
+}
+
+static int qcom_ssc_block_bus_remove(struct platform_device *pdev)
+{
+	struct qcom_ssc_block_bus_data *data = platform_get_drvdata(pdev);
+
+	qcom_ssc_block_bus_deinit(&pdev->dev);
+
+	iounmap(data->reg_mpm_sscaon_config0);
+	iounmap(data->reg_mpm_sscaon_config1);
+
+	qcom_ssc_block_bus_pds_disable(data->pds, data->num_pds);
+	qcom_ssc_block_bus_pds_detach(&pdev->dev, data->pds, data->num_pds);
+	pm_runtime_disable(&pdev->dev);
+	pm_clk_destroy(&pdev->dev);
+
+	return 0;
+}
+
+static const struct of_device_id qcom_ssc_block_bus_of_match[] = {
+	{ .compatible = "qcom,ssc-block-bus", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, qcom_ssc_block_bus_of_match);
+
+static struct platform_driver qcom_ssc_block_bus_driver = {
+	.probe = qcom_ssc_block_bus_probe,
+	.remove = qcom_ssc_block_bus_remove,
+	.driver = {
+		.name = "qcom-ssc-block-bus",
+		.of_match_table = qcom_ssc_block_bus_of_match,
+	},
+};
+
+module_platform_driver(qcom_ssc_block_bus_driver);
+
+MODULE_DESCRIPTION("A driver for handling the init sequence needed for accessing the SSC block on (some) qcom SoCs over AHB");
+MODULE_AUTHOR("Michael Srba <Michael.Srba@seznam.cz>");
+MODULE_LICENSE("GPL v2");