Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 419 insertions, 0 deletions

diff --git a/drivers/bus/vexpress-config.c b/drivers/bus/vexpress-config.c
new file mode 100644
index 000000000..a58ac0c8e
--- /dev/null
+++ b/drivers/bus/vexpress-config.c
@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Copyright (C) 2014 ARM Limited
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/sched/signal.h>
+#include <linux/slab.h>
+#include <linux/vexpress.h>
+
+#define SYS_MISC		0x0
+#define SYS_MISC_MASTERSITE	(1 << 14)
+
+#define SYS_PROCID0		0x24
+#define SYS_PROCID1		0x28
+#define SYS_HBI_MASK		0xfff
+#define SYS_PROCIDx_HBI_SHIFT	0
+
+#define SYS_CFGDATA		0x40
+
+#define SYS_CFGCTRL		0x44
+#define SYS_CFGCTRL_START	(1 << 31)
+#define SYS_CFGCTRL_WRITE	(1 << 30)
+#define SYS_CFGCTRL_DCC(n)	(((n) & 0xf) << 26)
+#define SYS_CFGCTRL_FUNC(n)	(((n) & 0x3f) << 20)
+#define SYS_CFGCTRL_SITE(n)	(((n) & 0x3) << 16)
+#define SYS_CFGCTRL_POSITION(n)	(((n) & 0xf) << 12)
+#define SYS_CFGCTRL_DEVICE(n)	(((n) & 0xfff) << 0)
+
+#define SYS_CFGSTAT		0x48
+#define SYS_CFGSTAT_ERR		(1 << 1)
+#define SYS_CFGSTAT_COMPLETE	(1 << 0)
+
+#define VEXPRESS_SITE_MB		0
+#define VEXPRESS_SITE_DB1		1
+#define VEXPRESS_SITE_DB2		2
+#define VEXPRESS_SITE_MASTER		0xf
+
+struct vexpress_syscfg {
+	struct device *dev;
+	void __iomem *base;
+	struct list_head funcs;
+};
+
+struct vexpress_syscfg_func {
+	struct list_head list;
+	struct vexpress_syscfg *syscfg;
+	struct regmap *regmap;
+	int num_templates;
+	u32 template[]; /* Keep it last! */
+};
+
+struct vexpress_config_bridge_ops {
+	struct regmap * (*regmap_init)(struct device *dev, void *context);
+	void (*regmap_exit)(struct regmap *regmap, void *context);
+};
+
+struct vexpress_config_bridge {
+	struct vexpress_config_bridge_ops *ops;
+	void *context;
+};
+
+
+static DEFINE_MUTEX(vexpress_config_mutex);
+static u32 vexpress_config_site_master = VEXPRESS_SITE_MASTER;
+
+
+static void vexpress_config_set_master(u32 site)
+{
+	vexpress_config_site_master = site;
+}
+
+static void vexpress_config_lock(void *arg)
+{
+	mutex_lock(&vexpress_config_mutex);
+}
+
+static void vexpress_config_unlock(void *arg)
+{
+	mutex_unlock(&vexpress_config_mutex);
+}
+
+
+static void vexpress_config_find_prop(struct device_node *node,
+		const char *name, u32 *val)
+{
+	/* Default value */
+	*val = 0;
+
+	of_node_get(node);
+	while (node) {
+		if (of_property_read_u32(node, name, val) == 0) {
+			of_node_put(node);
+			return;
+		}
+		node = of_get_next_parent(node);
+	}
+}
+
+static int vexpress_config_get_topo(struct device_node *node, u32 *site,
+		u32 *position, u32 *dcc)
+{
+	vexpress_config_find_prop(node, "arm,vexpress,site", site);
+	if (*site == VEXPRESS_SITE_MASTER)
+		*site = vexpress_config_site_master;
+	if (WARN_ON(vexpress_config_site_master == VEXPRESS_SITE_MASTER))
+		return -EINVAL;
+	vexpress_config_find_prop(node, "arm,vexpress,position", position);
+	vexpress_config_find_prop(node, "arm,vexpress,dcc", dcc);
+
+	return 0;
+}
+
+
+static void vexpress_config_devres_release(struct device *dev, void *res)
+{
+	struct vexpress_config_bridge *bridge = dev_get_drvdata(dev->parent);
+	struct regmap *regmap = res;
+
+	bridge->ops->regmap_exit(regmap, bridge->context);
+}
+
+struct regmap *devm_regmap_init_vexpress_config(struct device *dev)
+{
+	struct vexpress_config_bridge *bridge;
+	struct regmap *regmap;
+	struct regmap **res;
+
+	bridge = dev_get_drvdata(dev->parent);
+	if (WARN_ON(!bridge))
+		return ERR_PTR(-EINVAL);
+
+	res = devres_alloc(vexpress_config_devres_release, sizeof(*res),
+			GFP_KERNEL);
+	if (!res)
+		return ERR_PTR(-ENOMEM);
+
+	regmap = (bridge->ops->regmap_init)(dev, bridge->context);
+	if (IS_ERR(regmap)) {
+		devres_free(res);
+		return regmap;
+	}
+
+	*res = regmap;
+	devres_add(dev, res);
+
+	return regmap;
+}
+EXPORT_SYMBOL_GPL(devm_regmap_init_vexpress_config);
+
+static int vexpress_syscfg_exec(struct vexpress_syscfg_func *func,
+		int index, bool write, u32 *data)
+{
+	struct vexpress_syscfg *syscfg = func->syscfg;
+	u32 command, status;
+	int tries;
+	long timeout;
+
+	if (WARN_ON(index >= func->num_templates))
+		return -EINVAL;
+
+	command = readl(syscfg->base + SYS_CFGCTRL);
+	if (WARN_ON(command & SYS_CFGCTRL_START))
+		return -EBUSY;
+
+	command = func->template[index];
+	command |= SYS_CFGCTRL_START;
+	command |= write ? SYS_CFGCTRL_WRITE : 0;
+
+	/* Use a canary for reads */
+	if (!write)
+		*data = 0xdeadbeef;
+
+	dev_dbg(syscfg->dev, "func %p, command %x, data %x\n",
+			func, command, *data);
+	writel(*data, syscfg->base + SYS_CFGDATA);
+	writel(0, syscfg->base + SYS_CFGSTAT);
+	writel(command, syscfg->base + SYS_CFGCTRL);
+	mb();
+
+	/* The operation can take ages... Go to sleep, 100us initially */
+	tries = 100;
+	timeout = 100;
+	do {
+		if (!irqs_disabled()) {
+			set_current_state(TASK_INTERRUPTIBLE);
+			schedule_timeout(usecs_to_jiffies(timeout));
+			if (signal_pending(current))
+				return -EINTR;
+		} else {
+			udelay(timeout);
+		}
+
+		status = readl(syscfg->base + SYS_CFGSTAT);
+		if (status & SYS_CFGSTAT_ERR)
+			return -EFAULT;
+
+		if (timeout > 20)
+			timeout -= 20;
+	} while (--tries && !(status & SYS_CFGSTAT_COMPLETE));
+	if (WARN_ON_ONCE(!tries))
+		return -ETIMEDOUT;
+
+	if (!write) {
+		*data = readl(syscfg->base + SYS_CFGDATA);
+		dev_dbg(syscfg->dev, "func %p, read data %x\n", func, *data);
+	}
+
+	return 0;
+}
+
+static int vexpress_syscfg_read(void *context, unsigned int index,
+		unsigned int *val)
+{
+	struct vexpress_syscfg_func *func = context;
+
+	return vexpress_syscfg_exec(func, index, false, val);
+}
+
+static int vexpress_syscfg_write(void *context, unsigned int index,
+		unsigned int val)
+{
+	struct vexpress_syscfg_func *func = context;
+
+	return vexpress_syscfg_exec(func, index, true, &val);
+}
+
+static struct regmap_config vexpress_syscfg_regmap_config = {
+	.lock = vexpress_config_lock,
+	.unlock = vexpress_config_unlock,
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_read = vexpress_syscfg_read,
+	.reg_write = vexpress_syscfg_write,
+	.reg_format_endian = REGMAP_ENDIAN_LITTLE,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
+};
+
+
+static struct regmap *vexpress_syscfg_regmap_init(struct device *dev,
+		void *context)
+{
+	int err;
+	struct vexpress_syscfg *syscfg = context;
+	struct vexpress_syscfg_func *func;
+	struct property *prop;
+	const __be32 *val = NULL;
+	__be32 energy_quirk[4];
+	int num;
+	u32 site, position, dcc;
+	int i;
+
+	err = vexpress_config_get_topo(dev->of_node, &site,
+				&position, &dcc);
+	if (err)
+		return ERR_PTR(err);
+
+	prop = of_find_property(dev->of_node,
+			"arm,vexpress-sysreg,func", NULL);
+	if (!prop)
+		return ERR_PTR(-EINVAL);
+
+	num = prop->length / sizeof(u32) / 2;
+	val = prop->value;
+
+	/*
+	 * "arm,vexpress-energy" function used to be described
+	 * by its first device only, now it requires both
+	 */
+	if (num == 1 && of_device_is_compatible(dev->of_node,
+			"arm,vexpress-energy")) {
+		num = 2;
+		energy_quirk[0] = *val;
+		energy_quirk[2] = *val++;
+		energy_quirk[1] = *val;
+		energy_quirk[3] = cpu_to_be32(be32_to_cpup(val) + 1);
+		val = energy_quirk;
+	}
+
+	func = kzalloc(struct_size(func, template, num), GFP_KERNEL);
+	if (!func)
+		return ERR_PTR(-ENOMEM);
+
+	func->syscfg = syscfg;
+	func->num_templates = num;
+
+	for (i = 0; i < num; i++) {
+		u32 function, device;
+
+		function = be32_to_cpup(val++);
+		device = be32_to_cpup(val++);
+
+		dev_dbg(dev, "func %p: %u/%u/%u/%u/%u\n",
+				func, site, position, dcc,
+				function, device);
+
+		func->template[i] = SYS_CFGCTRL_DCC(dcc);
+		func->template[i] |= SYS_CFGCTRL_SITE(site);
+		func->template[i] |= SYS_CFGCTRL_POSITION(position);
+		func->template[i] |= SYS_CFGCTRL_FUNC(function);
+		func->template[i] |= SYS_CFGCTRL_DEVICE(device);
+	}
+
+	vexpress_syscfg_regmap_config.max_register = num - 1;
+
+	func->regmap = regmap_init(dev, NULL, func,
+			&vexpress_syscfg_regmap_config);
+
+	if (IS_ERR(func->regmap)) {
+		void *err = func->regmap;
+
+		kfree(func);
+		return err;
+	}
+
+	list_add(&func->list, &syscfg->funcs);
+
+	return func->regmap;
+}
+
+static void vexpress_syscfg_regmap_exit(struct regmap *regmap, void *context)
+{
+	struct vexpress_syscfg *syscfg = context;
+	struct vexpress_syscfg_func *func, *tmp;
+
+	regmap_exit(regmap);
+
+	list_for_each_entry_safe(func, tmp, &syscfg->funcs, list) {
+		if (func->regmap == regmap) {
+			list_del(&syscfg->funcs);
+			kfree(func);
+			break;
+		}
+	}
+}
+
+static struct vexpress_config_bridge_ops vexpress_syscfg_bridge_ops = {
+	.regmap_init = vexpress_syscfg_regmap_init,
+	.regmap_exit = vexpress_syscfg_regmap_exit,
+};
+
+
+static int vexpress_syscfg_probe(struct platform_device *pdev)
+{
+	struct vexpress_syscfg *syscfg;
+	struct resource *res;
+	struct vexpress_config_bridge *bridge;
+	struct device_node *node;
+	int master;
+	u32 dt_hbi;
+
+	syscfg = devm_kzalloc(&pdev->dev, sizeof(*syscfg), GFP_KERNEL);
+	if (!syscfg)
+		return -ENOMEM;
+	syscfg->dev = &pdev->dev;
+	INIT_LIST_HEAD(&syscfg->funcs);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	syscfg->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(syscfg->base))
+		return PTR_ERR(syscfg->base);
+
+	bridge = devm_kmalloc(&pdev->dev, sizeof(*bridge), GFP_KERNEL);
+	if (!bridge)
+		return -ENOMEM;
+
+	bridge->ops = &vexpress_syscfg_bridge_ops;
+	bridge->context = syscfg;
+
+	dev_set_drvdata(&pdev->dev, bridge);
+
+	master = readl(syscfg->base + SYS_MISC) & SYS_MISC_MASTERSITE ?
+			VEXPRESS_SITE_DB2 : VEXPRESS_SITE_DB1;
+	vexpress_config_set_master(master);
+
+	/* Confirm board type against DT property, if available */
+	if (of_property_read_u32(of_root, "arm,hbi", &dt_hbi) == 0) {
+		u32 id = readl(syscfg->base + (master == VEXPRESS_SITE_DB1 ?
+				 SYS_PROCID0 : SYS_PROCID1));
+		u32 hbi = (id >> SYS_PROCIDx_HBI_SHIFT) & SYS_HBI_MASK;
+
+		if (WARN_ON(dt_hbi != hbi))
+			dev_warn(&pdev->dev, "DT HBI (%x) is not matching hardware (%x)!\n",
+					dt_hbi, hbi);
+	}
+
+	for_each_compatible_node(node, NULL, "arm,vexpress,config-bus") {
+		struct device_node *bridge_np;
+
+		bridge_np = of_parse_phandle(node, "arm,vexpress,config-bridge", 0);
+		if (bridge_np != pdev->dev.parent->of_node)
+			continue;
+
+		of_platform_populate(node, NULL, NULL, &pdev->dev);
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id vexpress_syscfg_id_table[] = {
+	{ "vexpress-syscfg", },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, vexpress_syscfg_id_table);
+
+static struct platform_driver vexpress_syscfg_driver = {
+	.driver.name = "vexpress-syscfg",
+	.id_table = vexpress_syscfg_id_table,
+	.probe = vexpress_syscfg_probe,
+};
+module_platform_driver(vexpress_syscfg_driver);
+MODULE_LICENSE("GPL v2");