Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 219 insertions, 0 deletions

diff --git a/drivers/char/hw_random/amd-rng.c b/drivers/char/hw_random/amd-rng.c
new file mode 100644
index 000000000..0555e3838
--- /dev/null
+++ b/drivers/char/hw_random/amd-rng.c
@@ -0,0 +1,219 @@
+/*
+ * RNG driver for AMD RNGs
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * with the majority of the code coming from:
+ *
+ * Hardware driver for the Intel/AMD/VIA Random Number Generators (RNG)
+ * (c) Copyright 2003 Red Hat Inc <jgarzik@redhat.com>
+ *
+ * derived from
+ *
+ * Hardware driver for the AMD 768 Random Number Generator (RNG)
+ * (c) Copyright 2001 Red Hat Inc
+ *
+ * derived from
+ *
+ * Hardware driver for Intel i810 Random Number Generator (RNG)
+ * Copyright 2000,2001 Jeff Garzik <jgarzik@pobox.com>
+ * Copyright 2000,2001 Philipp Rumpf <prumpf@mandrakesoft.com>
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/hw_random.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#define DRV_NAME "AMD768-HWRNG"
+
+#define RNGDATA		0x00
+#define RNGDONE		0x04
+#define PMBASE_OFFSET	0xF0
+#define PMBASE_SIZE	8
+
+/*
+ * Data for PCI driver interface
+ *
+ * This data only exists for exporting the supported
+ * PCI ids via MODULE_DEVICE_TABLE.  We do not actually
+ * register a pci_driver, because someone else might one day
+ * want to register another driver on the same PCI id.
+ */
+static const struct pci_device_id pci_tbl[] = {
+	{ PCI_VDEVICE(AMD, 0x7443), 0, },
+	{ PCI_VDEVICE(AMD, 0x746b), 0, },
+	{ 0, },	/* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, pci_tbl);
+
+struct amd768_priv {
+	void __iomem *iobase;
+	struct pci_dev *pcidev;
+	u32 pmbase;
+};
+
+static int amd_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
+{
+	u32 *data = buf;
+	struct amd768_priv *priv = (struct amd768_priv *)rng->priv;
+	size_t read = 0;
+	/* We will wait at maximum one time per read */
+	int timeout = max / 4 + 1;
+
+	/*
+	 * RNG data is available when RNGDONE is set to 1
+	 * New random numbers are generated approximately 128 microseconds
+	 * after RNGDATA is read
+	 */
+	while (read < max) {
+		if (ioread32(priv->iobase + RNGDONE) == 0) {
+			if (wait) {
+				/* Delay given by datasheet */
+				usleep_range(128, 196);
+				if (timeout-- == 0)
+					return read;
+			} else {
+				return 0;
+			}
+		} else {
+			*data = ioread32(priv->iobase + RNGDATA);
+			data++;
+			read += 4;
+		}
+	}
+
+	return read;
+}
+
+static int amd_rng_init(struct hwrng *rng)
+{
+	struct amd768_priv *priv = (struct amd768_priv *)rng->priv;
+	u8 rnen;
+
+	pci_read_config_byte(priv->pcidev, 0x40, &rnen);
+	rnen |= BIT(7);	/* RNG on */
+	pci_write_config_byte(priv->pcidev, 0x40, rnen);
+
+	pci_read_config_byte(priv->pcidev, 0x41, &rnen);
+	rnen |= BIT(7);	/* PMIO enable */
+	pci_write_config_byte(priv->pcidev, 0x41, rnen);
+
+	return 0;
+}
+
+static void amd_rng_cleanup(struct hwrng *rng)
+{
+	struct amd768_priv *priv = (struct amd768_priv *)rng->priv;
+	u8 rnen;
+
+	pci_read_config_byte(priv->pcidev, 0x40, &rnen);
+	rnen &= ~BIT(7);	/* RNG off */
+	pci_write_config_byte(priv->pcidev, 0x40, rnen);
+}
+
+static struct hwrng amd_rng = {
+	.name		= "amd",
+	.init		= amd_rng_init,
+	.cleanup	= amd_rng_cleanup,
+	.read		= amd_rng_read,
+};
+
+static int __init amd_rng_mod_init(void)
+{
+	int err;
+	struct pci_dev *pdev = NULL;
+	const struct pci_device_id *ent;
+	u32 pmbase;
+	struct amd768_priv *priv;
+
+	for_each_pci_dev(pdev) {
+		ent = pci_match_id(pci_tbl, pdev);
+		if (ent)
+			goto found;
+	}
+	/* Device not found. */
+	return -ENODEV;
+
+found:
+	err = pci_read_config_dword(pdev, 0x58, &pmbase);
+	if (err)
+		goto put_dev;
+
+	pmbase &= 0x0000FF00;
+	if (pmbase == 0) {
+		err = -EIO;
+		goto put_dev;
+	}
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		err = -ENOMEM;
+		goto put_dev;
+	}
+
+	if (!request_region(pmbase + PMBASE_OFFSET, PMBASE_SIZE, DRV_NAME)) {
+		dev_err(&pdev->dev, DRV_NAME " region 0x%x already in use!\n",
+			pmbase + 0xF0);
+		err = -EBUSY;
+		goto out;
+	}
+
+	priv->iobase = ioport_map(pmbase + PMBASE_OFFSET, PMBASE_SIZE);
+	if (!priv->iobase) {
+		pr_err(DRV_NAME "Cannot map ioport\n");
+		err = -EINVAL;
+		goto err_iomap;
+	}
+
+	amd_rng.priv = (unsigned long)priv;
+	priv->pmbase = pmbase;
+	priv->pcidev = pdev;
+
+	pr_info(DRV_NAME " detected\n");
+	err = hwrng_register(&amd_rng);
+	if (err) {
+		pr_err(DRV_NAME " registering failed (%d)\n", err);
+		goto err_hwrng;
+	}
+	return 0;
+
+err_hwrng:
+	ioport_unmap(priv->iobase);
+err_iomap:
+	release_region(pmbase + PMBASE_OFFSET, PMBASE_SIZE);
+out:
+	kfree(priv);
+put_dev:
+	pci_dev_put(pdev);
+	return err;
+}
+
+static void __exit amd_rng_mod_exit(void)
+{
+	struct amd768_priv *priv;
+
+	priv = (struct amd768_priv *)amd_rng.priv;
+
+	hwrng_unregister(&amd_rng);
+
+	ioport_unmap(priv->iobase);
+
+	release_region(priv->pmbase + PMBASE_OFFSET, PMBASE_SIZE);
+
+	pci_dev_put(priv->pcidev);
+
+	kfree(priv);
+}
+
+module_init(amd_rng_mod_init);
+module_exit(amd_rng_mod_exit);
+
+MODULE_AUTHOR("The Linux Kernel team");
+MODULE_DESCRIPTION("H/W RNG driver for AMD chipsets");
+MODULE_LICENSE("GPL");