Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 237 insertions, 0 deletions

diff --git a/drivers/char/ipmi/ipmi_si_hotmod.c b/drivers/char/ipmi/ipmi_si_hotmod.c
new file mode 100644
index 000000000..6b12a83cc
--- /dev/null
+++ b/drivers/char/ipmi/ipmi_si_hotmod.c
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ipmi_si_hotmod.c
+ *
+ * Handling for dynamically adding/removing IPMI devices through
+ * a module parameter (and thus sysfs).
+ */
+
+#define pr_fmt(fmt) "ipmi_hotmod: " fmt
+
+#include <linux/moduleparam.h>
+#include <linux/ipmi.h>
+#include <linux/atomic.h>
+#include "ipmi_si.h"
+#include "ipmi_plat_data.h"
+
+static int hotmod_handler(const char *val, const struct kernel_param *kp);
+
+module_param_call(hotmod, hotmod_handler, NULL, NULL, 0200);
+MODULE_PARM_DESC(hotmod,
+		 "Add and remove interfaces.  See Documentation/driver-api/ipmi.rst in the kernel sources for the gory details.");
+
+/*
+ * Parms come in as <op1>[:op2[:op3...]].  ops are:
+ *   add|remove,kcs|bt|smic,mem|i/o,<address>[,<opt1>[,<opt2>[,...]]]
+ * Options are:
+ *   rsp=<regspacing>
+ *   rsi=<regsize>
+ *   rsh=<regshift>
+ *   irq=<irq>
+ *   ipmb=<ipmb addr>
+ */
+enum hotmod_op { HM_ADD, HM_REMOVE };
+struct hotmod_vals {
+	const char *name;
+	const int  val;
+};
+
+static const struct hotmod_vals hotmod_ops[] = {
+	{ "add",	HM_ADD },
+	{ "remove",	HM_REMOVE },
+	{ NULL }
+};
+
+static const struct hotmod_vals hotmod_si[] = {
+	{ "kcs",	SI_KCS },
+	{ "smic",	SI_SMIC },
+	{ "bt",		SI_BT },
+	{ NULL }
+};
+
+static const struct hotmod_vals hotmod_as[] = {
+	{ "mem",	IPMI_MEM_ADDR_SPACE },
+	{ "i/o",	IPMI_IO_ADDR_SPACE },
+	{ NULL }
+};
+
+static int parse_str(const struct hotmod_vals *v, unsigned int *val, char *name,
+		     const char **curr)
+{
+	char *s;
+	int  i;
+
+	s = strchr(*curr, ',');
+	if (!s) {
+		pr_warn("No hotmod %s given\n", name);
+		return -EINVAL;
+	}
+	*s = '\0';
+	s++;
+	for (i = 0; v[i].name; i++) {
+		if (strcmp(*curr, v[i].name) == 0) {
+			*val = v[i].val;
+			*curr = s;
+			return 0;
+		}
+	}
+
+	pr_warn("Invalid hotmod %s '%s'\n", name, *curr);
+	return -EINVAL;
+}
+
+static int check_hotmod_int_op(const char *curr, const char *option,
+			       const char *name, unsigned int *val)
+{
+	char *n;
+
+	if (strcmp(curr, name) == 0) {
+		if (!option) {
+			pr_warn("No option given for '%s'\n", curr);
+			return -EINVAL;
+		}
+		*val = simple_strtoul(option, &n, 0);
+		if ((*n != '\0') || (*option == '\0')) {
+			pr_warn("Bad option given for '%s'\n", curr);
+			return -EINVAL;
+		}
+		return 1;
+	}
+	return 0;
+}
+
+static int parse_hotmod_str(const char *curr, enum hotmod_op *op,
+			    struct ipmi_plat_data *h)
+{
+	char *s, *o;
+	int rv;
+	unsigned int ival;
+
+	h->iftype = IPMI_PLAT_IF_SI;
+	rv = parse_str(hotmod_ops, &ival, "operation", &curr);
+	if (rv)
+		return rv;
+	*op = ival;
+
+	rv = parse_str(hotmod_si, &ival, "interface type", &curr);
+	if (rv)
+		return rv;
+	h->type = ival;
+
+	rv = parse_str(hotmod_as, &ival, "address space", &curr);
+	if (rv)
+		return rv;
+	h->space = ival;
+
+	s = strchr(curr, ',');
+	if (s) {
+		*s = '\0';
+		s++;
+	}
+	rv = kstrtoul(curr, 0, &h->addr);
+	if (rv) {
+		pr_warn("Invalid hotmod address '%s': %d\n", curr, rv);
+		return rv;
+	}
+
+	while (s) {
+		curr = s;
+		s = strchr(curr, ',');
+		if (s) {
+			*s = '\0';
+			s++;
+		}
+		o = strchr(curr, '=');
+		if (o) {
+			*o = '\0';
+			o++;
+		}
+		rv = check_hotmod_int_op(curr, o, "rsp", &h->regspacing);
+		if (rv < 0)
+			return rv;
+		else if (rv)
+			continue;
+		rv = check_hotmod_int_op(curr, o, "rsi", &h->regsize);
+		if (rv < 0)
+			return rv;
+		else if (rv)
+			continue;
+		rv = check_hotmod_int_op(curr, o, "rsh", &h->regshift);
+		if (rv < 0)
+			return rv;
+		else if (rv)
+			continue;
+		rv = check_hotmod_int_op(curr, o, "irq", &h->irq);
+		if (rv < 0)
+			return rv;
+		else if (rv)
+			continue;
+		rv = check_hotmod_int_op(curr, o, "ipmb", &h->slave_addr);
+		if (rv < 0)
+			return rv;
+		else if (rv)
+			continue;
+
+		pr_warn("Invalid hotmod option '%s'\n", curr);
+		return -EINVAL;
+	}
+
+	h->addr_source = SI_HOTMOD;
+	return 0;
+}
+
+static atomic_t hotmod_nr;
+
+static int hotmod_handler(const char *val, const struct kernel_param *kp)
+{
+	int  rv;
+	struct ipmi_plat_data h;
+	char *str, *curr, *next;
+
+	str = kstrdup(val, GFP_KERNEL);
+	if (!str)
+		return -ENOMEM;
+
+	/* Kill any trailing spaces, as we can get a "\n" from echo. */
+	for (curr = strstrip(str); curr; curr = next) {
+		enum hotmod_op op;
+
+		next = strchr(curr, ':');
+		if (next) {
+			*next = '\0';
+			next++;
+		}
+
+		memset(&h, 0, sizeof(h));
+		rv = parse_hotmod_str(curr, &op, &h);
+		if (rv)
+			goto out;
+
+		if (op == HM_ADD) {
+			ipmi_platform_add("hotmod-ipmi-si",
+					  atomic_inc_return(&hotmod_nr),
+					  &h);
+		} else {
+			struct device *dev;
+
+			dev = ipmi_si_remove_by_data(h.space, h.type, h.addr);
+			if (dev && dev_is_platform(dev)) {
+				struct platform_device *pdev;
+
+				pdev = to_platform_device(dev);
+				if (strcmp(pdev->name, "hotmod-ipmi-si") == 0)
+					platform_device_unregister(pdev);
+			}
+			put_device(dev);
+		}
+	}
+	rv = strlen(val);
+out:
+	kfree(str);
+	return rv;
+}
+
+void ipmi_si_hotmod_exit(void)
+{
+	ipmi_remove_platform_device_by_name("hotmod-ipmi-si");
+}