Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 520 insertions, 0 deletions

diff --git a/drivers/char/toshiba.c b/drivers/char/toshiba.c
new file mode 100644
index 000000000..776abbfd8
--- /dev/null
+++ b/drivers/char/toshiba.c
@@ -0,0 +1,520 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* toshiba.c -- Linux driver for accessing the SMM on Toshiba laptops
+ *
+ * Copyright (c) 1996-2001  Jonathan A. Buzzard (jonathan@buzzard.org.uk)
+ *
+ * Valuable assistance and patches from:
+ *     Tom May <tom@you-bastards.com>
+ *     Rob Napier <rnapier@employees.org>
+ *
+ * Fn status port numbers for machine ID's courtesy of
+ *     0xfc02: Scott Eisert <scott.e@sky-eye.com>
+ *     0xfc04: Steve VanDevender <stevev@efn.org>
+ *     0xfc08: Garth Berry <garth@itsbruce.net>
+ *     0xfc0a: Egbert Eich <eich@xfree86.org>
+ *     0xfc10: Andrew Lofthouse <Andrew.Lofthouse@robins.af.mil>
+ *     0xfc11: Spencer Olson <solson@novell.com>
+ *     0xfc13: Claudius Frankewitz <kryp@gmx.de>
+ *     0xfc15: Tom May <tom@you-bastards.com>
+ *     0xfc17: Dave Konrad <konrad@xenia.it>
+ *     0xfc1a: George Betzos <betzos@engr.colostate.edu>
+ *     0xfc1b: Munemasa Wada <munemasa@jnovel.co.jp>
+ *     0xfc1d: Arthur Liu <armie@slap.mine.nu>
+ *     0xfc5a: Jacques L'helgoualc'h <lhh@free.fr>
+ *     0xfcd1: Mr. Dave Konrad <konrad@xenia.it>
+ *
+ * WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
+ *
+ *   This code is covered by the GNU GPL and you are free to make any
+ *   changes you wish to it under the terms of the license. However the
+ *   code has the potential to render your computer and/or someone else's
+ *   unusable. Please proceed with care when modifying the code.
+ *
+ * Note: Unfortunately the laptop hardware can close the System Configuration
+ *       Interface on it's own accord. It is therefore necessary for *all*
+ *       programs using this driver to be aware that *any* SCI call can fail at
+ *       *any* time. It is up to any program to be aware of this eventuality
+ *       and take appropriate steps.
+ *
+ * The information used to write this driver has been obtained by reverse
+ * engineering the software supplied by Toshiba for their portable computers in
+ * strict accordance with the European Council Directive 92/250/EEC on the legal
+ * protection of computer programs, and it's implementation into English Law by
+ * the Copyright (Computer Programs) Regulations 1992 (S.I. 1992 No.3233).
+ */
+
+#define TOSH_VERSION "1.11 26/9/2001"
+#define TOSH_DEBUG 0
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/miscdevice.h>
+#include <linux/ioport.h>
+#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/init.h>
+#include <linux/stat.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/mutex.h>
+#include <linux/toshiba.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jonathan Buzzard <jonathan@buzzard.org.uk>");
+MODULE_DESCRIPTION("Toshiba laptop SMM driver");
+
+static DEFINE_MUTEX(tosh_mutex);
+static int tosh_fn;
+module_param_named(fn, tosh_fn, int, 0);
+MODULE_PARM_DESC(fn, "User specified Fn key detection port");
+
+static int tosh_id;
+static int tosh_bios;
+static int tosh_date;
+static int tosh_sci;
+static int tosh_fan;
+
+static long tosh_ioctl(struct file *, unsigned int,
+	unsigned long);
+
+
+static const struct file_operations tosh_fops = {
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl	= tosh_ioctl,
+	.llseek		= noop_llseek,
+};
+
+static struct miscdevice tosh_device = {
+	TOSH_MINOR_DEV,
+	"toshiba",
+	&tosh_fops
+};
+
+/*
+ * Read the Fn key status
+ */
+#ifdef CONFIG_PROC_FS
+static int tosh_fn_status(void)
+{
+        unsigned char scan;
+	unsigned long flags;
+
+	if (tosh_fn!=0) {
+		scan = inb(tosh_fn);
+	} else {
+		local_irq_save(flags);
+		outb(0x8e, 0xe4);
+		scan = inb(0xe5);
+		local_irq_restore(flags);
+	}
+
+        return (int) scan;
+}
+#endif
+
+
+/*
+ * For the Portage 610CT and the Tecra 700CS/700CDT emulate the HCI fan function
+ */
+static int tosh_emulate_fan(SMMRegisters *regs)
+{
+	unsigned long eax,ecx,flags;
+	unsigned char al;
+
+	eax = regs->eax & 0xff00;
+	ecx = regs->ecx & 0xffff;
+
+	/* Portage 610CT */
+
+	if (tosh_id==0xfccb) {
+		if (eax==0xfe00) {
+			/* fan status */
+			local_irq_save(flags);
+			outb(0xbe, 0xe4);
+			al = inb(0xe5);
+			local_irq_restore(flags);
+			regs->eax = 0x00;
+			regs->ecx = (unsigned int) (al & 0x01);
+		}
+		if ((eax==0xff00) && (ecx==0x0000)) {
+			/* fan off */
+			local_irq_save(flags);
+			outb(0xbe, 0xe4);
+			al = inb(0xe5);
+			outb(0xbe, 0xe4);
+			outb (al | 0x01, 0xe5);
+			local_irq_restore(flags);
+			regs->eax = 0x00;
+			regs->ecx = 0x00;
+		}
+		if ((eax==0xff00) && (ecx==0x0001)) {
+			/* fan on */
+			local_irq_save(flags);
+			outb(0xbe, 0xe4);
+			al = inb(0xe5);
+			outb(0xbe, 0xe4);
+			outb(al & 0xfe, 0xe5);
+			local_irq_restore(flags);
+			regs->eax = 0x00;
+			regs->ecx = 0x01;
+		}
+	}
+
+	/* Tecra 700CS/CDT */
+
+	if (tosh_id==0xfccc) {
+		if (eax==0xfe00) {
+			/* fan status */
+			local_irq_save(flags);
+			outb(0xe0, 0xe4);
+			al = inb(0xe5);
+			local_irq_restore(flags);
+			regs->eax = 0x00;
+			regs->ecx = al & 0x01;
+		}
+		if ((eax==0xff00) && (ecx==0x0000)) {
+			/* fan off */
+			local_irq_save(flags);
+			outb(0xe0, 0xe4);
+			al = inb(0xe5);
+			outw(0xe0 | ((al & 0xfe) << 8), 0xe4);
+			local_irq_restore(flags);
+			regs->eax = 0x00;
+			regs->ecx = 0x00;
+		}
+		if ((eax==0xff00) && (ecx==0x0001)) {
+			/* fan on */
+			local_irq_save(flags);
+			outb(0xe0, 0xe4);
+			al = inb(0xe5);
+			outw(0xe0 | ((al | 0x01) << 8), 0xe4);
+			local_irq_restore(flags);
+			regs->eax = 0x00;
+			regs->ecx = 0x01;
+		}
+	}
+
+	return 0;
+}
+
+
+/*
+ * Put the laptop into System Management Mode
+ */
+int tosh_smm(SMMRegisters *regs)
+{
+	int eax;
+
+	asm ("# load the values into the registers\n\t" \
+		"pushl %%eax\n\t" \
+		"movl 0(%%eax),%%edx\n\t" \
+		"push %%edx\n\t" \
+		"movl 4(%%eax),%%ebx\n\t" \
+		"movl 8(%%eax),%%ecx\n\t" \
+		"movl 12(%%eax),%%edx\n\t" \
+		"movl 16(%%eax),%%esi\n\t" \
+		"movl 20(%%eax),%%edi\n\t" \
+		"popl %%eax\n\t" \
+		"# call the System Management mode\n\t" \
+		"inb $0xb2,%%al\n\t"
+		"# fill out the memory with the values in the registers\n\t" \
+		"xchgl %%eax,(%%esp)\n\t"
+		"movl %%ebx,4(%%eax)\n\t" \
+		"movl %%ecx,8(%%eax)\n\t" \
+		"movl %%edx,12(%%eax)\n\t" \
+		"movl %%esi,16(%%eax)\n\t" \
+		"movl %%edi,20(%%eax)\n\t" \
+		"popl %%edx\n\t" \
+		"movl %%edx,0(%%eax)\n\t" \
+		"# setup the return value to the carry flag\n\t" \
+		"lahf\n\t" \
+		"shrl $8,%%eax\n\t" \
+		"andl $1,%%eax\n" \
+		: "=a" (eax)
+		: "a" (regs)
+		: "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
+
+	return eax;
+}
+EXPORT_SYMBOL(tosh_smm);
+
+
+static long tosh_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
+{
+	SMMRegisters regs;
+	SMMRegisters __user *argp = (SMMRegisters __user *)arg;
+	unsigned short ax,bx;
+	int err;
+
+	if (!argp)
+		return -EINVAL;
+
+	if (copy_from_user(&regs, argp, sizeof(SMMRegisters)))
+		return -EFAULT;
+
+	switch (cmd) {
+		case TOSH_SMM:
+			ax = regs.eax & 0xff00;
+			bx = regs.ebx & 0xffff;
+			/* block HCI calls to read/write memory & PCI devices */
+			if (((ax==0xff00) || (ax==0xfe00)) && (bx>0x0069))
+				return -EINVAL;
+
+			/* do we need to emulate the fan ? */
+			mutex_lock(&tosh_mutex);
+			if (tosh_fan==1) {
+				if (((ax==0xf300) || (ax==0xf400)) && (bx==0x0004)) {
+					err = tosh_emulate_fan(&regs);
+					mutex_unlock(&tosh_mutex);
+					break;
+				}
+			}
+			err = tosh_smm(&regs);
+			mutex_unlock(&tosh_mutex);
+			break;
+		default:
+			return -EINVAL;
+	}
+
+        if (copy_to_user(argp, &regs, sizeof(SMMRegisters)))
+        	return -EFAULT;
+
+	return (err==0) ? 0:-EINVAL;
+}
+
+
+/*
+ * Print the information for /proc/toshiba
+ */
+#ifdef CONFIG_PROC_FS
+static int proc_toshiba_show(struct seq_file *m, void *v)
+{
+	int key;
+
+	key = tosh_fn_status();
+
+	/* Arguments
+	     0) Linux driver version (this will change if format changes)
+	     1) Machine ID
+	     2) SCI version
+	     3) BIOS version (major, minor)
+	     4) BIOS date (in SCI date format)
+	     5) Fn Key status
+	*/
+	seq_printf(m, "1.1 0x%04x %d.%d %d.%d 0x%04x 0x%02x\n",
+		tosh_id,
+		(tosh_sci & 0xff00)>>8,
+		tosh_sci & 0xff,
+		(tosh_bios & 0xff00)>>8,
+		tosh_bios & 0xff,
+		tosh_date,
+		key);
+	return 0;
+}
+#endif
+
+
+/*
+ * Determine which port to use for the Fn key status
+ */
+static void tosh_set_fn_port(void)
+{
+	switch (tosh_id) {
+		case 0xfc02: case 0xfc04: case 0xfc09: case 0xfc0a: case 0xfc10:
+		case 0xfc11: case 0xfc13: case 0xfc15: case 0xfc1a: case 0xfc1b:
+		case 0xfc5a:
+			tosh_fn = 0x62;
+			break;
+		case 0xfc08: case 0xfc17: case 0xfc1d: case 0xfcd1: case 0xfce0:
+		case 0xfce2:
+			tosh_fn = 0x68;
+			break;
+		default:
+			tosh_fn = 0x00;
+			break;
+	}
+
+	return;
+}
+
+
+/*
+ * Get the machine identification number of the current model
+ */
+static int tosh_get_machine_id(void __iomem *bios)
+{
+	int id;
+	SMMRegisters regs;
+	unsigned short bx,cx;
+	unsigned long address;
+
+	id = (0x100*(int) readb(bios+0xfffe))+((int) readb(bios+0xfffa));
+
+	/* do we have a SCTTable machine identication number on our hands */
+
+	if (id==0xfc2f) {
+
+		/* start by getting a pointer into the BIOS */
+
+		regs.eax = 0xc000;
+		regs.ebx = 0x0000;
+		regs.ecx = 0x0000;
+		tosh_smm(&regs);
+		bx = (unsigned short) (regs.ebx & 0xffff);
+
+		/* At this point in the Toshiba routines under MS Windows
+		   the bx register holds 0xe6f5. However my code is producing
+		   a different value! For the time being I will just fudge the
+		   value. This has been verified on a Satellite Pro 430CDT,
+		   Tecra 750CDT, Tecra 780DVD and Satellite 310CDT. */
+#if TOSH_DEBUG
+		pr_debug("toshiba: debugging ID ebx=0x%04x\n", regs.ebx);
+#endif
+		bx = 0xe6f5;
+
+		/* now twiddle with our pointer a bit */
+
+		address = bx;
+		cx = readw(bios + address);
+		address = 9+bx+cx;
+		cx = readw(bios + address);
+		address = 0xa+cx;
+		cx = readw(bios + address);
+
+		/* now construct our machine identification number */
+
+		id = ((cx & 0xff)<<8)+((cx & 0xff00)>>8);
+	}
+
+	return id;
+}
+
+
+/*
+ * Probe for the presence of a Toshiba laptop
+ *
+ *   returns and non-zero if unable to detect the presence of a Toshiba
+ *   laptop, otherwise zero and determines the Machine ID, BIOS version and
+ *   date, and SCI version.
+ */
+static int tosh_probe(void)
+{
+	int i,major,minor,day,year,month,flag;
+	unsigned char signature[7] = { 0x54,0x4f,0x53,0x48,0x49,0x42,0x41 };
+	SMMRegisters regs;
+	void __iomem *bios = ioremap(0xf0000, 0x10000);
+
+	if (!bios)
+		return -ENOMEM;
+
+	/* extra sanity check for the string "TOSHIBA" in the BIOS because
+	   some machines that are not Toshiba's pass the next test */
+
+	for (i=0;i<7;i++) {
+		if (readb(bios+0xe010+i)!=signature[i]) {
+			pr_err("toshiba: not a supported Toshiba laptop\n");
+			iounmap(bios);
+			return -ENODEV;
+		}
+	}
+
+	/* call the Toshiba SCI support check routine */
+
+	regs.eax = 0xf0f0;
+	regs.ebx = 0x0000;
+	regs.ecx = 0x0000;
+	flag = tosh_smm(&regs);
+
+	/* if this is not a Toshiba laptop carry flag is set and ah=0x86 */
+
+	if ((flag==1) || ((regs.eax & 0xff00)==0x8600)) {
+		pr_err("toshiba: not a supported Toshiba laptop\n");
+		iounmap(bios);
+		return -ENODEV;
+	}
+
+	/* if we get this far then we are running on a Toshiba (probably)! */
+
+	tosh_sci = regs.edx & 0xffff;
+
+	/* next get the machine ID of the current laptop */
+
+	tosh_id = tosh_get_machine_id(bios);
+
+	/* get the BIOS version */
+
+	major = readb(bios+0xe009)-'0';
+	minor = ((readb(bios+0xe00b)-'0')*10)+(readb(bios+0xe00c)-'0');
+	tosh_bios = (major*0x100)+minor;
+
+	/* get the BIOS date */
+
+	day = ((readb(bios+0xfff5)-'0')*10)+(readb(bios+0xfff6)-'0');
+	month = ((readb(bios+0xfff8)-'0')*10)+(readb(bios+0xfff9)-'0');
+	year = ((readb(bios+0xfffb)-'0')*10)+(readb(bios+0xfffc)-'0');
+	tosh_date = (((year-90) & 0x1f)<<10) | ((month & 0xf)<<6)
+		| ((day & 0x1f)<<1);
+
+
+	/* in theory we should check the ports we are going to use for the
+	   fn key detection (and the fan on the Portage 610/Tecra700), and
+	   then request them to stop other drivers using them. However as
+	   the keyboard driver grabs 0x60-0x6f and the pic driver grabs
+	   0xa0-0xbf we can't. We just have to live dangerously and use the
+	   ports anyway, oh boy! */
+
+	/* do we need to emulate the fan? */
+
+	if ((tosh_id==0xfccb) || (tosh_id==0xfccc))
+		tosh_fan = 1;
+
+	iounmap(bios);
+
+	return 0;
+}
+
+static int __init toshiba_init(void)
+{
+	int retval;
+	/* are we running on a Toshiba laptop */
+
+	if (tosh_probe())
+		return -ENODEV;
+
+	pr_info("Toshiba System Management Mode driver v" TOSH_VERSION "\n");
+
+	/* set the port to use for Fn status if not specified as a parameter */
+	if (tosh_fn==0x00)
+		tosh_set_fn_port();
+
+	/* register the device file */
+	retval = misc_register(&tosh_device);
+	if (retval < 0)
+		return retval;
+
+#ifdef CONFIG_PROC_FS
+	{
+		struct proc_dir_entry *pde;
+
+		pde = proc_create_single("toshiba", 0, NULL, proc_toshiba_show);
+		if (!pde) {
+			misc_deregister(&tosh_device);
+			return -ENOMEM;
+		}
+	}
+#endif
+
+	return 0;
+}
+
+static void __exit toshiba_exit(void)
+{
+	remove_proc_entry("toshiba", NULL);
+	misc_deregister(&tosh_device);
+}
+
+module_init(toshiba_init);
+module_exit(toshiba_exit);
+