Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 219 insertions, 0 deletions

diff --git a/drivers/char/tpm/tpm_i2c_atmel.c b/drivers/char/tpm/tpm_i2c_atmel.c
new file mode 100644
index 000000000..8f77154e0
--- /dev/null
+++ b/drivers/char/tpm/tpm_i2c_atmel.c
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ATMEL I2C TPM AT97SC3204T
+ *
+ * Copyright (C) 2012 V Lab Technologies
+ *  Teddy Reed <teddy@prosauce.org>
+ * Copyright (C) 2013, Obsidian Research Corp.
+ *  Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
+ * Device driver for ATMEL I2C TPMs.
+ *
+ * Teddy Reed determined the basic I2C command flow, unlike other I2C TPM
+ * devices the raw TCG formatted TPM command data is written via I2C and then
+ * raw TCG formatted TPM command data is returned via I2C.
+ *
+ * TGC status/locality/etc functions seen in the LPC implementation do not
+ * seem to be present.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include "tpm.h"
+
+#define I2C_DRIVER_NAME "tpm_i2c_atmel"
+
+#define TPM_I2C_SHORT_TIMEOUT  750     /* ms */
+#define TPM_I2C_LONG_TIMEOUT   2000    /* 2 sec */
+
+#define ATMEL_STS_OK 1
+
+struct priv_data {
+	size_t len;
+	/* This is the amount we read on the first try. 25 was chosen to fit a
+	 * fair number of read responses in the buffer so a 2nd retry can be
+	 * avoided in small message cases. */
+	u8 buffer[sizeof(struct tpm_header) + 25];
+};
+
+static int i2c_atmel_send(struct tpm_chip *chip, u8 *buf, size_t len)
+{
+	struct priv_data *priv = dev_get_drvdata(&chip->dev);
+	struct i2c_client *client = to_i2c_client(chip->dev.parent);
+	s32 status;
+
+	priv->len = 0;
+
+	if (len <= 2)
+		return -EIO;
+
+	status = i2c_master_send(client, buf, len);
+
+	dev_dbg(&chip->dev,
+		"%s(buf=%*ph len=%0zx) -> sts=%d\n", __func__,
+		(int)min_t(size_t, 64, len), buf, len, status);
+
+	if (status < 0)
+		return status;
+
+	/* The upper layer does not support incomplete sends. */
+	if (status != len)
+		return -E2BIG;
+
+	return 0;
+}
+
+static int i2c_atmel_recv(struct tpm_chip *chip, u8 *buf, size_t count)
+{
+	struct priv_data *priv = dev_get_drvdata(&chip->dev);
+	struct i2c_client *client = to_i2c_client(chip->dev.parent);
+	struct tpm_header *hdr = (struct tpm_header *)priv->buffer;
+	u32 expected_len;
+	int rc;
+
+	if (priv->len == 0)
+		return -EIO;
+
+	/* Get the message size from the message header, if we didn't get the
+	 * whole message in read_status then we need to re-read the
+	 * message. */
+	expected_len = be32_to_cpu(hdr->length);
+	if (expected_len > count)
+		return -ENOMEM;
+
+	if (priv->len >= expected_len) {
+		dev_dbg(&chip->dev,
+			"%s early(buf=%*ph count=%0zx) -> ret=%d\n", __func__,
+			(int)min_t(size_t, 64, expected_len), buf, count,
+			expected_len);
+		memcpy(buf, priv->buffer, expected_len);
+		return expected_len;
+	}
+
+	rc = i2c_master_recv(client, buf, expected_len);
+	dev_dbg(&chip->dev,
+		"%s reread(buf=%*ph count=%0zx) -> ret=%d\n", __func__,
+		(int)min_t(size_t, 64, expected_len), buf, count,
+		expected_len);
+	return rc;
+}
+
+static void i2c_atmel_cancel(struct tpm_chip *chip)
+{
+	dev_err(&chip->dev, "TPM operation cancellation was requested, but is not supported");
+}
+
+static u8 i2c_atmel_read_status(struct tpm_chip *chip)
+{
+	struct priv_data *priv = dev_get_drvdata(&chip->dev);
+	struct i2c_client *client = to_i2c_client(chip->dev.parent);
+	int rc;
+
+	/* The TPM fails the I2C read until it is ready, so we do the entire
+	 * transfer here and buffer it locally. This way the common code can
+	 * properly handle the timeouts. */
+	priv->len = 0;
+	memset(priv->buffer, 0, sizeof(priv->buffer));
+
+
+	/* Once the TPM has completed the command the command remains readable
+	 * until another command is issued. */
+	rc = i2c_master_recv(client, priv->buffer, sizeof(priv->buffer));
+	dev_dbg(&chip->dev,
+		"%s: sts=%d", __func__, rc);
+	if (rc <= 0)
+		return 0;
+
+	priv->len = rc;
+
+	return ATMEL_STS_OK;
+}
+
+static bool i2c_atmel_req_canceled(struct tpm_chip *chip, u8 status)
+{
+	return false;
+}
+
+static const struct tpm_class_ops i2c_atmel = {
+	.flags = TPM_OPS_AUTO_STARTUP,
+	.status = i2c_atmel_read_status,
+	.recv = i2c_atmel_recv,
+	.send = i2c_atmel_send,
+	.cancel = i2c_atmel_cancel,
+	.req_complete_mask = ATMEL_STS_OK,
+	.req_complete_val = ATMEL_STS_OK,
+	.req_canceled = i2c_atmel_req_canceled,
+};
+
+static int i2c_atmel_probe(struct i2c_client *client)
+{
+	struct tpm_chip *chip;
+	struct device *dev = &client->dev;
+	struct priv_data *priv;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	chip = tpmm_chip_alloc(dev, &i2c_atmel);
+	if (IS_ERR(chip))
+		return PTR_ERR(chip);
+
+	priv = devm_kzalloc(dev, sizeof(struct priv_data), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* Default timeouts */
+	chip->timeout_a = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
+	chip->timeout_b = msecs_to_jiffies(TPM_I2C_LONG_TIMEOUT);
+	chip->timeout_c = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
+	chip->timeout_d = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
+
+	dev_set_drvdata(&chip->dev, priv);
+
+	/* There is no known way to probe for this device, and all version
+	 * information seems to be read via TPM commands. Thus we rely on the
+	 * TPM startup process in the common code to detect the device. */
+
+	return tpm_chip_register(chip);
+}
+
+static void i2c_atmel_remove(struct i2c_client *client)
+{
+	struct device *dev = &(client->dev);
+	struct tpm_chip *chip = dev_get_drvdata(dev);
+	tpm_chip_unregister(chip);
+}
+
+static const struct i2c_device_id i2c_atmel_id[] = {
+	{I2C_DRIVER_NAME, 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, i2c_atmel_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id i2c_atmel_of_match[] = {
+	{.compatible = "atmel,at97sc3204t"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, i2c_atmel_of_match);
+#endif
+
+static SIMPLE_DEV_PM_OPS(i2c_atmel_pm_ops, tpm_pm_suspend, tpm_pm_resume);
+
+static struct i2c_driver i2c_atmel_driver = {
+	.id_table = i2c_atmel_id,
+	.probe_new = i2c_atmel_probe,
+	.remove = i2c_atmel_remove,
+	.driver = {
+		.name = I2C_DRIVER_NAME,
+		.pm = &i2c_atmel_pm_ops,
+		.of_match_table = of_match_ptr(i2c_atmel_of_match),
+	},
+};
+
+module_i2c_driver(i2c_atmel_driver);
+
+MODULE_AUTHOR("Jason Gunthorpe <jgunthorpe@obsidianresearch.com>");
+MODULE_DESCRIPTION("Atmel TPM I2C Driver");
+MODULE_LICENSE("GPL");