Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 863 insertions, 0 deletions

diff --git a/drivers/clk/bcm/clk-iproc-pll.c b/drivers/clk/bcm/clk-iproc-pll.c
new file mode 100644
index 000000000..680f9d8d3
--- /dev/null
+++ b/drivers/clk/bcm/clk-iproc-pll.c
@@ -0,0 +1,863 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clkdev.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+
+#include "clk-iproc.h"
+
+#define PLL_VCO_HIGH_SHIFT 19
+#define PLL_VCO_LOW_SHIFT  30
+
+/*
+ * PLL MACRO_SELECT modes 0 to 5 choose pre-calculated PLL output frequencies
+ * from a look-up table. Mode 7 allows user to manipulate PLL clock dividers
+ */
+#define PLL_USER_MODE 7
+
+/* number of delay loops waiting for PLL to lock */
+#define LOCK_DELAY 100
+
+/* number of VCO frequency bands */
+#define NUM_FREQ_BANDS 8
+
+#define NUM_KP_BANDS 3
+enum kp_band {
+	KP_BAND_MID = 0,
+	KP_BAND_HIGH,
+	KP_BAND_HIGH_HIGH
+};
+
+static const unsigned int kp_table[NUM_KP_BANDS][NUM_FREQ_BANDS] = {
+	{ 5, 6, 6, 7, 7, 8, 9, 10 },
+	{ 4, 4, 5, 5, 6, 7, 8, 9  },
+	{ 4, 5, 5, 6, 7, 8, 9, 10 },
+};
+
+static const unsigned long ref_freq_table[NUM_FREQ_BANDS][2] = {
+	{ 10000000,  12500000  },
+	{ 12500000,  15000000  },
+	{ 15000000,  20000000  },
+	{ 20000000,  25000000  },
+	{ 25000000,  50000000  },
+	{ 50000000,  75000000  },
+	{ 75000000,  100000000 },
+	{ 100000000, 125000000 },
+};
+
+enum vco_freq_range {
+	VCO_LOW       = 700000000U,
+	VCO_MID       = 1200000000U,
+	VCO_HIGH      = 2200000000U,
+	VCO_HIGH_HIGH = 3100000000U,
+	VCO_MAX       = 4000000000U,
+};
+
+struct iproc_pll {
+	void __iomem *status_base;
+	void __iomem *control_base;
+	void __iomem *pwr_base;
+	void __iomem *asiu_base;
+
+	const struct iproc_pll_ctrl *ctrl;
+	const struct iproc_pll_vco_param *vco_param;
+	unsigned int num_vco_entries;
+};
+
+struct iproc_clk {
+	struct clk_hw hw;
+	struct iproc_pll *pll;
+	const struct iproc_clk_ctrl *ctrl;
+};
+
+#define to_iproc_clk(hw) container_of(hw, struct iproc_clk, hw)
+
+static int pll_calc_param(unsigned long target_rate,
+			unsigned long parent_rate,
+			struct iproc_pll_vco_param *vco_out)
+{
+	u64 ndiv_int, ndiv_frac, residual;
+
+	ndiv_int = target_rate / parent_rate;
+
+	if (!ndiv_int || (ndiv_int > 255))
+		return -EINVAL;
+
+	residual = target_rate - (ndiv_int * parent_rate);
+	residual <<= 20;
+
+	/*
+	 * Add half of the divisor so the result will be rounded to closest
+	 * instead of rounded down.
+	 */
+	residual += (parent_rate / 2);
+	ndiv_frac = div64_u64((u64)residual, (u64)parent_rate);
+
+	vco_out->ndiv_int = ndiv_int;
+	vco_out->ndiv_frac = ndiv_frac;
+	vco_out->pdiv = 1;
+
+	vco_out->rate = vco_out->ndiv_int * parent_rate;
+	residual = (u64)vco_out->ndiv_frac * (u64)parent_rate;
+	residual >>= 20;
+	vco_out->rate += residual;
+
+	return 0;
+}
+
+/*
+ * Based on the target frequency, find a match from the VCO frequency parameter
+ * table and return its index
+ */
+static int pll_get_rate_index(struct iproc_pll *pll, unsigned int target_rate)
+{
+	int i;
+
+	for (i = 0; i < pll->num_vco_entries; i++)
+		if (target_rate == pll->vco_param[i].rate)
+			break;
+
+	if (i >= pll->num_vco_entries)
+		return -EINVAL;
+
+	return i;
+}
+
+static int get_kp(unsigned long ref_freq, enum kp_band kp_index)
+{
+	int i;
+
+	if (ref_freq < ref_freq_table[0][0])
+		return -EINVAL;
+
+	for (i = 0; i < NUM_FREQ_BANDS; i++) {
+		if (ref_freq >= ref_freq_table[i][0] &&
+		    ref_freq < ref_freq_table[i][1])
+			return kp_table[kp_index][i];
+	}
+	return -EINVAL;
+}
+
+static int pll_wait_for_lock(struct iproc_pll *pll)
+{
+	int i;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+
+	for (i = 0; i < LOCK_DELAY; i++) {
+		u32 val = readl(pll->status_base + ctrl->status.offset);
+
+		if (val & (1 << ctrl->status.shift))
+			return 0;
+		udelay(10);
+	}
+
+	return -EIO;
+}
+
+static void iproc_pll_write(const struct iproc_pll *pll, void __iomem *base,
+			    const u32 offset, u32 val)
+{
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+
+	writel(val, base + offset);
+
+	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK &&
+		     (base == pll->status_base || base == pll->control_base)))
+		val = readl(base + offset);
+}
+
+static void __pll_disable(struct iproc_pll *pll)
+{
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	u32 val;
+
+	if (ctrl->flags & IPROC_CLK_PLL_ASIU) {
+		val = readl(pll->asiu_base + ctrl->asiu.offset);
+		val &= ~(1 << ctrl->asiu.en_shift);
+		iproc_pll_write(pll, pll->asiu_base, ctrl->asiu.offset, val);
+	}
+
+	if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) {
+		val = readl(pll->control_base + ctrl->aon.offset);
+		val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift;
+		iproc_pll_write(pll, pll->control_base, ctrl->aon.offset, val);
+	}
+
+	if (pll->pwr_base) {
+		/* latch input value so core power can be shut down */
+		val = readl(pll->pwr_base + ctrl->aon.offset);
+		val |= 1 << ctrl->aon.iso_shift;
+		iproc_pll_write(pll, pll->pwr_base, ctrl->aon.offset, val);
+
+		/* power down the core */
+		val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
+		iproc_pll_write(pll, pll->pwr_base, ctrl->aon.offset, val);
+	}
+}
+
+static int __pll_enable(struct iproc_pll *pll)
+{
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	u32 val;
+
+	if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) {
+		val = readl(pll->control_base + ctrl->aon.offset);
+		val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
+		iproc_pll_write(pll, pll->control_base, ctrl->aon.offset, val);
+	}
+
+	if (pll->pwr_base) {
+		/* power up the PLL and make sure it's not latched */
+		val = readl(pll->pwr_base + ctrl->aon.offset);
+		val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift;
+		val &= ~(1 << ctrl->aon.iso_shift);
+		iproc_pll_write(pll, pll->pwr_base, ctrl->aon.offset, val);
+	}
+
+	/* certain PLLs also need to be ungated from the ASIU top level */
+	if (ctrl->flags & IPROC_CLK_PLL_ASIU) {
+		val = readl(pll->asiu_base + ctrl->asiu.offset);
+		val |= (1 << ctrl->asiu.en_shift);
+		iproc_pll_write(pll, pll->asiu_base, ctrl->asiu.offset, val);
+	}
+
+	return 0;
+}
+
+static void __pll_put_in_reset(struct iproc_pll *pll)
+{
+	u32 val;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
+
+	val = readl(pll->control_base + reset->offset);
+	if (ctrl->flags & IPROC_CLK_PLL_RESET_ACTIVE_LOW)
+		val |= BIT(reset->reset_shift) | BIT(reset->p_reset_shift);
+	else
+		val &= ~(BIT(reset->reset_shift) | BIT(reset->p_reset_shift));
+	iproc_pll_write(pll, pll->control_base, reset->offset, val);
+}
+
+static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp,
+				  unsigned int ka, unsigned int ki)
+{
+	u32 val;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
+	const struct iproc_pll_dig_filter_ctrl *dig_filter = &ctrl->dig_filter;
+
+	val = readl(pll->control_base + dig_filter->offset);
+	val &= ~(bit_mask(dig_filter->ki_width) << dig_filter->ki_shift |
+		bit_mask(dig_filter->kp_width) << dig_filter->kp_shift |
+		bit_mask(dig_filter->ka_width) << dig_filter->ka_shift);
+	val |= ki << dig_filter->ki_shift | kp << dig_filter->kp_shift |
+	       ka << dig_filter->ka_shift;
+	iproc_pll_write(pll, pll->control_base, dig_filter->offset, val);
+
+	val = readl(pll->control_base + reset->offset);
+	if (ctrl->flags & IPROC_CLK_PLL_RESET_ACTIVE_LOW)
+		val &= ~(BIT(reset->reset_shift) | BIT(reset->p_reset_shift));
+	else
+		val |= BIT(reset->reset_shift) | BIT(reset->p_reset_shift);
+	iproc_pll_write(pll, pll->control_base, reset->offset, val);
+}
+
+/*
+ * Determines if the change to be applied to the PLL is minor (just an update
+ * or the fractional divider). If so, then we can avoid going through a
+ * disruptive reset and lock sequence.
+ */
+static bool pll_fractional_change_only(struct iproc_pll *pll,
+				       struct iproc_pll_vco_param *vco)
+{
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	u32 val;
+	u32 ndiv_int;
+	unsigned int pdiv;
+
+	/* PLL needs to be locked */
+	val = readl(pll->status_base + ctrl->status.offset);
+	if ((val & (1 << ctrl->status.shift)) == 0)
+		return false;
+
+	val = readl(pll->control_base + ctrl->ndiv_int.offset);
+	ndiv_int = (val >> ctrl->ndiv_int.shift) &
+		bit_mask(ctrl->ndiv_int.width);
+
+	if (ndiv_int != vco->ndiv_int)
+		return false;
+
+	val = readl(pll->control_base + ctrl->pdiv.offset);
+	pdiv = (val >> ctrl->pdiv.shift) & bit_mask(ctrl->pdiv.width);
+
+	if (pdiv != vco->pdiv)
+		return false;
+
+	return true;
+}
+
+static int pll_set_rate(struct iproc_clk *clk, struct iproc_pll_vco_param *vco,
+			unsigned long parent_rate)
+{
+	struct iproc_pll *pll = clk->pll;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	int ka = 0, ki, kp, ret;
+	unsigned long rate = vco->rate;
+	u32 val;
+	enum kp_band kp_index;
+	unsigned long ref_freq;
+	const char *clk_name = clk_hw_get_name(&clk->hw);
+
+	/*
+	 * reference frequency = parent frequency / PDIV
+	 * If PDIV = 0, then it becomes a multiplier (x2)
+	 */
+	if (vco->pdiv == 0)
+		ref_freq = parent_rate * 2;
+	else
+		ref_freq = parent_rate / vco->pdiv;
+
+	/* determine Ki and Kp index based on target VCO frequency */
+	if (rate >= VCO_LOW && rate < VCO_HIGH) {
+		ki = 4;
+		kp_index = KP_BAND_MID;
+	} else if (rate >= VCO_HIGH && rate < VCO_HIGH_HIGH) {
+		ki = 3;
+		kp_index = KP_BAND_HIGH;
+	} else if (rate >= VCO_HIGH_HIGH && rate < VCO_MAX) {
+		ki = 3;
+		kp_index = KP_BAND_HIGH_HIGH;
+	} else {
+		pr_err("%s: pll: %s has invalid rate: %lu\n", __func__,
+				clk_name, rate);
+		return -EINVAL;
+	}
+
+	kp = get_kp(ref_freq, kp_index);
+	if (kp < 0) {
+		pr_err("%s: pll: %s has invalid kp\n", __func__, clk_name);
+		return kp;
+	}
+
+	ret = __pll_enable(pll);
+	if (ret) {
+		pr_err("%s: pll: %s fails to enable\n", __func__, clk_name);
+		return ret;
+	}
+
+	if (pll_fractional_change_only(clk->pll, vco)) {
+		/* program fractional part of NDIV */
+		if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
+			val = readl(pll->control_base + ctrl->ndiv_frac.offset);
+			val &= ~(bit_mask(ctrl->ndiv_frac.width) <<
+				 ctrl->ndiv_frac.shift);
+			val |= vco->ndiv_frac << ctrl->ndiv_frac.shift;
+			iproc_pll_write(pll, pll->control_base,
+					ctrl->ndiv_frac.offset, val);
+			return 0;
+		}
+	}
+
+	/* put PLL in reset */
+	__pll_put_in_reset(pll);
+
+	/* set PLL in user mode before modifying PLL controls */
+	if (ctrl->flags & IPROC_CLK_PLL_USER_MODE_ON) {
+		val = readl(pll->control_base + ctrl->macro_mode.offset);
+		val &= ~(bit_mask(ctrl->macro_mode.width) <<
+			ctrl->macro_mode.shift);
+		val |= PLL_USER_MODE << ctrl->macro_mode.shift;
+		iproc_pll_write(pll, pll->control_base,
+			ctrl->macro_mode.offset, val);
+	}
+
+	iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.u_offset, 0);
+
+	val = readl(pll->control_base + ctrl->vco_ctrl.l_offset);
+
+	if (rate >= VCO_LOW && rate < VCO_MID)
+		val |= (1 << PLL_VCO_LOW_SHIFT);
+
+	if (rate < VCO_HIGH)
+		val &= ~(1 << PLL_VCO_HIGH_SHIFT);
+	else
+		val |= (1 << PLL_VCO_HIGH_SHIFT);
+
+	iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.l_offset, val);
+
+	/* program integer part of NDIV */
+	val = readl(pll->control_base + ctrl->ndiv_int.offset);
+	val &= ~(bit_mask(ctrl->ndiv_int.width) << ctrl->ndiv_int.shift);
+	val |= vco->ndiv_int << ctrl->ndiv_int.shift;
+	iproc_pll_write(pll, pll->control_base, ctrl->ndiv_int.offset, val);
+
+	/* program fractional part of NDIV */
+	if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
+		val = readl(pll->control_base + ctrl->ndiv_frac.offset);
+		val &= ~(bit_mask(ctrl->ndiv_frac.width) <<
+			 ctrl->ndiv_frac.shift);
+		val |= vco->ndiv_frac << ctrl->ndiv_frac.shift;
+		iproc_pll_write(pll, pll->control_base, ctrl->ndiv_frac.offset,
+				val);
+	}
+
+	/* program PDIV */
+	val = readl(pll->control_base + ctrl->pdiv.offset);
+	val &= ~(bit_mask(ctrl->pdiv.width) << ctrl->pdiv.shift);
+	val |= vco->pdiv << ctrl->pdiv.shift;
+	iproc_pll_write(pll, pll->control_base, ctrl->pdiv.offset, val);
+
+	__pll_bring_out_reset(pll, kp, ka, ki);
+
+	ret = pll_wait_for_lock(pll);
+	if (ret < 0) {
+		pr_err("%s: pll: %s failed to lock\n", __func__, clk_name);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int iproc_pll_enable(struct clk_hw *hw)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	struct iproc_pll *pll = clk->pll;
+
+	return __pll_enable(pll);
+}
+
+static void iproc_pll_disable(struct clk_hw *hw)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	struct iproc_pll *pll = clk->pll;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+
+	if (ctrl->flags & IPROC_CLK_AON)
+		return;
+
+	__pll_disable(pll);
+}
+
+static unsigned long iproc_pll_recalc_rate(struct clk_hw *hw,
+					   unsigned long parent_rate)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	struct iproc_pll *pll = clk->pll;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	u32 val;
+	u64 ndiv, ndiv_int, ndiv_frac;
+	unsigned int pdiv;
+	unsigned long rate;
+
+	if (parent_rate == 0)
+		return 0;
+
+	/* PLL needs to be locked */
+	val = readl(pll->status_base + ctrl->status.offset);
+	if ((val & (1 << ctrl->status.shift)) == 0)
+		return 0;
+
+	/*
+	 * PLL output frequency =
+	 *
+	 * ((ndiv_int + ndiv_frac / 2^20) * (parent clock rate / pdiv)
+	 */
+	val = readl(pll->control_base + ctrl->ndiv_int.offset);
+	ndiv_int = (val >> ctrl->ndiv_int.shift) &
+		bit_mask(ctrl->ndiv_int.width);
+	ndiv = ndiv_int << 20;
+
+	if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
+		val = readl(pll->control_base + ctrl->ndiv_frac.offset);
+		ndiv_frac = (val >> ctrl->ndiv_frac.shift) &
+			bit_mask(ctrl->ndiv_frac.width);
+		ndiv += ndiv_frac;
+	}
+
+	val = readl(pll->control_base + ctrl->pdiv.offset);
+	pdiv = (val >> ctrl->pdiv.shift) & bit_mask(ctrl->pdiv.width);
+
+	rate = (ndiv * parent_rate) >> 20;
+
+	if (pdiv == 0)
+		rate *= 2;
+	else
+		rate /= pdiv;
+
+	return rate;
+}
+
+static int iproc_pll_determine_rate(struct clk_hw *hw,
+		struct clk_rate_request *req)
+{
+	unsigned int  i;
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	struct iproc_pll *pll = clk->pll;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	unsigned long  diff, best_diff;
+	unsigned int  best_idx = 0;
+	int ret;
+
+	if (req->rate == 0 || req->best_parent_rate == 0)
+		return -EINVAL;
+
+	if (ctrl->flags & IPROC_CLK_PLL_CALC_PARAM) {
+		struct iproc_pll_vco_param vco_param;
+
+		ret = pll_calc_param(req->rate, req->best_parent_rate,
+					&vco_param);
+		if (ret)
+			return ret;
+
+		req->rate = vco_param.rate;
+		return 0;
+	}
+
+	if (!pll->vco_param)
+		return -EINVAL;
+
+	best_diff = ULONG_MAX;
+	for (i = 0; i < pll->num_vco_entries; i++) {
+		diff = abs(req->rate - pll->vco_param[i].rate);
+		if (diff <= best_diff) {
+			best_diff = diff;
+			best_idx = i;
+		}
+		/* break now if perfect match */
+		if (diff == 0)
+			break;
+	}
+
+	req->rate = pll->vco_param[best_idx].rate;
+
+	return 0;
+}
+
+static int iproc_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	struct iproc_pll *pll = clk->pll;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	struct iproc_pll_vco_param vco_param;
+	int rate_index, ret;
+
+	if (ctrl->flags & IPROC_CLK_PLL_CALC_PARAM) {
+		ret = pll_calc_param(rate, parent_rate, &vco_param);
+		if (ret)
+			return ret;
+	} else {
+		rate_index = pll_get_rate_index(pll, rate);
+		if (rate_index < 0)
+			return rate_index;
+
+		vco_param = pll->vco_param[rate_index];
+	}
+
+	ret = pll_set_rate(clk, &vco_param, parent_rate);
+	return ret;
+}
+
+static const struct clk_ops iproc_pll_ops = {
+	.enable = iproc_pll_enable,
+	.disable = iproc_pll_disable,
+	.recalc_rate = iproc_pll_recalc_rate,
+	.determine_rate = iproc_pll_determine_rate,
+	.set_rate = iproc_pll_set_rate,
+};
+
+static int iproc_clk_enable(struct clk_hw *hw)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	const struct iproc_clk_ctrl *ctrl = clk->ctrl;
+	struct iproc_pll *pll = clk->pll;
+	u32 val;
+
+	/* channel enable is active low */
+	val = readl(pll->control_base + ctrl->enable.offset);
+	val &= ~(1 << ctrl->enable.enable_shift);
+	iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
+
+	/* also make sure channel is not held */
+	val = readl(pll->control_base + ctrl->enable.offset);
+	val &= ~(1 << ctrl->enable.hold_shift);
+	iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
+
+	return 0;
+}
+
+static void iproc_clk_disable(struct clk_hw *hw)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	const struct iproc_clk_ctrl *ctrl = clk->ctrl;
+	struct iproc_pll *pll = clk->pll;
+	u32 val;
+
+	if (ctrl->flags & IPROC_CLK_AON)
+		return;
+
+	val = readl(pll->control_base + ctrl->enable.offset);
+	val |= 1 << ctrl->enable.enable_shift;
+	iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
+}
+
+static unsigned long iproc_clk_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	const struct iproc_clk_ctrl *ctrl = clk->ctrl;
+	struct iproc_pll *pll = clk->pll;
+	u32 val;
+	unsigned int mdiv;
+	unsigned long rate;
+
+	if (parent_rate == 0)
+		return 0;
+
+	val = readl(pll->control_base + ctrl->mdiv.offset);
+	mdiv = (val >> ctrl->mdiv.shift) & bit_mask(ctrl->mdiv.width);
+	if (mdiv == 0)
+		mdiv = 256;
+
+	if (ctrl->flags & IPROC_CLK_MCLK_DIV_BY_2)
+		rate = parent_rate / (mdiv * 2);
+	else
+		rate = parent_rate / mdiv;
+
+	return rate;
+}
+
+static int iproc_clk_determine_rate(struct clk_hw *hw,
+		struct clk_rate_request *req)
+{
+	unsigned int bestdiv;
+
+	if (req->rate == 0)
+		return -EINVAL;
+	if (req->rate == req->best_parent_rate)
+		return 0;
+
+	bestdiv = DIV_ROUND_CLOSEST(req->best_parent_rate, req->rate);
+	if (bestdiv < 2)
+		req->rate = req->best_parent_rate;
+
+	if (bestdiv > 256)
+		bestdiv = 256;
+
+	req->rate = req->best_parent_rate / bestdiv;
+
+	return 0;
+}
+
+static int iproc_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	const struct iproc_clk_ctrl *ctrl = clk->ctrl;
+	struct iproc_pll *pll = clk->pll;
+	u32 val;
+	unsigned int div;
+
+	if (rate == 0 || parent_rate == 0)
+		return -EINVAL;
+
+	div = DIV_ROUND_CLOSEST(parent_rate, rate);
+	if (ctrl->flags & IPROC_CLK_MCLK_DIV_BY_2)
+		div /=  2;
+
+	if (div > 256)
+		return -EINVAL;
+
+	val = readl(pll->control_base + ctrl->mdiv.offset);
+	if (div == 256) {
+		val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
+	} else {
+		val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
+		val |= div << ctrl->mdiv.shift;
+	}
+	iproc_pll_write(pll, pll->control_base, ctrl->mdiv.offset, val);
+
+	return 0;
+}
+
+static const struct clk_ops iproc_clk_ops = {
+	.enable = iproc_clk_enable,
+	.disable = iproc_clk_disable,
+	.recalc_rate = iproc_clk_recalc_rate,
+	.determine_rate = iproc_clk_determine_rate,
+	.set_rate = iproc_clk_set_rate,
+};
+
+/*
+ * Some PLLs require the PLL SW override bit to be set before changes can be
+ * applied to the PLL
+ */
+static void iproc_pll_sw_cfg(struct iproc_pll *pll)
+{
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+
+	if (ctrl->flags & IPROC_CLK_PLL_NEEDS_SW_CFG) {
+		u32 val;
+
+		val = readl(pll->control_base + ctrl->sw_ctrl.offset);
+		val |= BIT(ctrl->sw_ctrl.shift);
+		iproc_pll_write(pll, pll->control_base, ctrl->sw_ctrl.offset,
+				val);
+	}
+}
+
+void iproc_pll_clk_setup(struct device_node *node,
+			 const struct iproc_pll_ctrl *pll_ctrl,
+			 const struct iproc_pll_vco_param *vco,
+			 unsigned int num_vco_entries,
+			 const struct iproc_clk_ctrl *clk_ctrl,
+			 unsigned int num_clks)
+{
+	int i, ret;
+	struct iproc_pll *pll;
+	struct iproc_clk *iclk;
+	struct clk_init_data init;
+	const char *parent_name;
+	struct iproc_clk *iclk_array;
+	struct clk_hw_onecell_data *clk_data;
+	const char *clk_name;
+
+	if (WARN_ON(!pll_ctrl) || WARN_ON(!clk_ctrl))
+		return;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (WARN_ON(!pll))
+		return;
+
+	clk_data = kzalloc(struct_size(clk_data, hws, num_clks), GFP_KERNEL);
+	if (WARN_ON(!clk_data))
+		goto err_clk_data;
+	clk_data->num = num_clks;
+
+	iclk_array = kcalloc(num_clks, sizeof(struct iproc_clk), GFP_KERNEL);
+	if (WARN_ON(!iclk_array))
+		goto err_clks;
+
+	pll->control_base = of_iomap(node, 0);
+	if (WARN_ON(!pll->control_base))
+		goto err_pll_iomap;
+
+	/* Some SoCs do not require the pwr_base, thus failing is not fatal */
+	pll->pwr_base = of_iomap(node, 1);
+
+	/* some PLLs require gating control at the top ASIU level */
+	if (pll_ctrl->flags & IPROC_CLK_PLL_ASIU) {
+		pll->asiu_base = of_iomap(node, 2);
+		if (WARN_ON(!pll->asiu_base))
+			goto err_asiu_iomap;
+	}
+
+	if (pll_ctrl->flags & IPROC_CLK_PLL_SPLIT_STAT_CTRL) {
+		/* Some SoCs have a split status/control.  If this does not
+		 * exist, assume they are unified.
+		 */
+		pll->status_base = of_iomap(node, 2);
+		if (!pll->status_base)
+			goto err_status_iomap;
+	} else
+		pll->status_base = pll->control_base;
+
+	/* initialize and register the PLL itself */
+	pll->ctrl = pll_ctrl;
+
+	iclk = &iclk_array[0];
+	iclk->pll = pll;
+
+	ret = of_property_read_string_index(node, "clock-output-names",
+					    0, &clk_name);
+	if (WARN_ON(ret))
+		goto err_pll_register;
+
+	init.name = clk_name;
+	init.ops = &iproc_pll_ops;
+	init.flags = 0;
+	parent_name = of_clk_get_parent_name(node, 0);
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+	iclk->hw.init = &init;
+
+	if (vco) {
+		pll->num_vco_entries = num_vco_entries;
+		pll->vco_param = vco;
+	}
+
+	iproc_pll_sw_cfg(pll);
+
+	ret = clk_hw_register(NULL, &iclk->hw);
+	if (WARN_ON(ret))
+		goto err_pll_register;
+
+	clk_data->hws[0] = &iclk->hw;
+	parent_name = clk_name;
+
+	/* now initialize and register all leaf clocks */
+	for (i = 1; i < num_clks; i++) {
+		memset(&init, 0, sizeof(init));
+
+		ret = of_property_read_string_index(node, "clock-output-names",
+						    i, &clk_name);
+		if (WARN_ON(ret))
+			goto err_clk_register;
+
+		iclk = &iclk_array[i];
+		iclk->pll = pll;
+		iclk->ctrl = &clk_ctrl[i];
+
+		init.name = clk_name;
+		init.ops = &iproc_clk_ops;
+		init.flags = 0;
+		init.parent_names = (parent_name ? &parent_name : NULL);
+		init.num_parents = (parent_name ? 1 : 0);
+		iclk->hw.init = &init;
+
+		ret = clk_hw_register(NULL, &iclk->hw);
+		if (WARN_ON(ret))
+			goto err_clk_register;
+
+		clk_data->hws[i] = &iclk->hw;
+	}
+
+	ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
+	if (WARN_ON(ret))
+		goto err_clk_register;
+
+	return;
+
+err_clk_register:
+	while (--i >= 0)
+		clk_hw_unregister(clk_data->hws[i]);
+
+err_pll_register:
+	if (pll->status_base != pll->control_base)
+		iounmap(pll->status_base);
+
+err_status_iomap:
+	if (pll->asiu_base)
+		iounmap(pll->asiu_base);
+
+err_asiu_iomap:
+	if (pll->pwr_base)
+		iounmap(pll->pwr_base);
+
+	iounmap(pll->control_base);
+
+err_pll_iomap:
+	kfree(iclk_array);
+
+err_clks:
+	kfree(clk_data);
+
+err_clk_data:
+	kfree(pll);
+}