Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 386 insertions, 0 deletions

diff --git a/drivers/clk/berlin/bg2q.c b/drivers/clk/berlin/bg2q.c
new file mode 100644
index 000000000..dd2784bb7
--- /dev/null
+++ b/drivers/clk/berlin/bg2q.c
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014 Marvell Technology Group Ltd.
+ *
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/berlin2q.h>
+
+#include "berlin2-div.h"
+#include "berlin2-pll.h"
+#include "common.h"
+
+#define REG_PINMUX0		0x0018
+#define REG_PINMUX5		0x002c
+#define REG_SYSPLLCTL0		0x0030
+#define REG_SYSPLLCTL4		0x0040
+#define REG_CLKENABLE		0x00e8
+#define REG_CLKSELECT0		0x00ec
+#define REG_CLKSELECT1		0x00f0
+#define REG_CLKSELECT2		0x00f4
+#define REG_CLKSWITCH0		0x00f8
+#define REG_CLKSWITCH1		0x00fc
+#define REG_SW_GENERIC0		0x0110
+#define REG_SW_GENERIC3		0x011c
+#define REG_SDIO0XIN_CLKCTL	0x0158
+#define REG_SDIO1XIN_CLKCTL	0x015c
+
+#define	MAX_CLKS 28
+static struct clk_hw_onecell_data *clk_data;
+static DEFINE_SPINLOCK(lock);
+static void __iomem *gbase;
+static void __iomem *cpupll_base;
+
+enum {
+	REFCLK,
+	SYSPLL, CPUPLL,
+	AVPLL_B1, AVPLL_B2, AVPLL_B3, AVPLL_B4,
+	AVPLL_B5, AVPLL_B6, AVPLL_B7, AVPLL_B8,
+};
+
+static const char *clk_names[] = {
+	[REFCLK]		= "refclk",
+	[SYSPLL]		= "syspll",
+	[CPUPLL]		= "cpupll",
+	[AVPLL_B1]		= "avpll_b1",
+	[AVPLL_B2]		= "avpll_b2",
+	[AVPLL_B3]		= "avpll_b3",
+	[AVPLL_B4]		= "avpll_b4",
+	[AVPLL_B5]		= "avpll_b5",
+	[AVPLL_B6]		= "avpll_b6",
+	[AVPLL_B7]		= "avpll_b7",
+	[AVPLL_B8]		= "avpll_b8",
+};
+
+static const struct berlin2_pll_map bg2q_pll_map __initconst = {
+	.vcodiv		= {1, 0, 2, 0, 3, 4, 0, 6, 8},
+	.mult		= 1,
+	.fbdiv_shift	= 7,
+	.rfdiv_shift	= 2,
+	.divsel_shift	= 9,
+};
+
+static const u8 default_parent_ids[] = {
+	SYSPLL, AVPLL_B4, AVPLL_B5, AVPLL_B6, AVPLL_B7, SYSPLL
+};
+
+static const struct berlin2_div_data bg2q_divs[] __initconst = {
+	{
+		.name = "sys",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 0),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT0, 0),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT0, 3),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 3),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 4),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 5),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = CLK_IGNORE_UNUSED,
+	},
+	{
+		.name = "drmfigo",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 17),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT0, 6),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT0, 9),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 6),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 7),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 8),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "cfg",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 1),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT0, 12),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT0, 15),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 9),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 10),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 11),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "gfx2d",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 4),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT0, 18),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT0, 21),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 12),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 13),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 14),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "zsp",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 6),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT0, 24),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT0, 27),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 15),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 16),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 17),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "perif",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 7),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT1, 0),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT1, 3),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 18),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 19),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 20),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = CLK_IGNORE_UNUSED,
+	},
+	{
+		.name = "pcube",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 2),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT1, 6),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT1, 9),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 21),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 22),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 23),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "vscope",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 3),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT1, 12),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT1, 15),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 24),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 25),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 26),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "nfc_ecc",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 19),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT1, 18),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT1, 21),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 27),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 28),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 29),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "vpp",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 21),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT1, 24),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT1, 27),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 30),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 31),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 0),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "app",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 20),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT2, 0),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT2, 3),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH1, 1),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH1, 2),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 3),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "sdio0xin",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_SINGLE_DIV(REG_SDIO0XIN_CLKCTL),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "sdio1xin",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_SINGLE_DIV(REG_SDIO1XIN_CLKCTL),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+};
+
+static const struct berlin2_gate_data bg2q_gates[] __initconst = {
+	{ "gfx2daxi",	"perif",	5 },
+	{ "geth0",	"perif",	8 },
+	{ "sata",	"perif",	9 },
+	{ "ahbapb",	"perif",	10, CLK_IGNORE_UNUSED },
+	{ "usb0",	"perif",	11 },
+	{ "usb1",	"perif",	12 },
+	{ "usb2",	"perif",	13 },
+	{ "usb3",	"perif",	14 },
+	{ "pbridge",	"perif",	15, CLK_IGNORE_UNUSED },
+	{ "sdio",	"perif",	16 },
+	{ "nfc",	"perif",	18 },
+	{ "pcie",	"perif",	22 },
+};
+
+static void __init berlin2q_clock_setup(struct device_node *np)
+{
+	struct device_node *parent_np = of_get_parent(np);
+	const char *parent_names[9];
+	struct clk *clk;
+	struct clk_hw **hws;
+	int n, ret;
+
+	clk_data = kzalloc(struct_size(clk_data, hws, MAX_CLKS), GFP_KERNEL);
+	if (!clk_data) {
+		of_node_put(parent_np);
+		return;
+	}
+	clk_data->num = MAX_CLKS;
+	hws = clk_data->hws;
+
+	gbase = of_iomap(parent_np, 0);
+	if (!gbase) {
+		of_node_put(parent_np);
+		pr_err("%pOF: Unable to map global base\n", np);
+		return;
+	}
+
+	/* BG2Q CPU PLL is not part of global registers */
+	cpupll_base = of_iomap(parent_np, 1);
+	of_node_put(parent_np);
+	if (!cpupll_base) {
+		pr_err("%pOF: Unable to map cpupll base\n", np);
+		iounmap(gbase);
+		return;
+	}
+
+	/* overwrite default clock names with DT provided ones */
+	clk = of_clk_get_by_name(np, clk_names[REFCLK]);
+	if (!IS_ERR(clk)) {
+		clk_names[REFCLK] = __clk_get_name(clk);
+		clk_put(clk);
+	}
+
+	/* simple register PLLs */
+	ret = berlin2_pll_register(&bg2q_pll_map, gbase + REG_SYSPLLCTL0,
+				   clk_names[SYSPLL], clk_names[REFCLK], 0);
+	if (ret)
+		goto bg2q_fail;
+
+	ret = berlin2_pll_register(&bg2q_pll_map, cpupll_base,
+				   clk_names[CPUPLL], clk_names[REFCLK], 0);
+	if (ret)
+		goto bg2q_fail;
+
+	/* TODO: add BG2Q AVPLL */
+
+	/*
+	 * TODO: add reference clock bypass switches:
+	 * memPLLSWBypass, cpuPLLSWBypass, and sysPLLSWBypass
+	 */
+
+	/* clock divider cells */
+	for (n = 0; n < ARRAY_SIZE(bg2q_divs); n++) {
+		const struct berlin2_div_data *dd = &bg2q_divs[n];
+		int k;
+
+		for (k = 0; k < dd->num_parents; k++)
+			parent_names[k] = clk_names[dd->parent_ids[k]];
+
+		hws[CLKID_SYS + n] = berlin2_div_register(&dd->map, gbase,
+				dd->name, dd->div_flags, parent_names,
+				dd->num_parents, dd->flags, &lock);
+	}
+
+	/* clock gate cells */
+	for (n = 0; n < ARRAY_SIZE(bg2q_gates); n++) {
+		const struct berlin2_gate_data *gd = &bg2q_gates[n];
+
+		hws[CLKID_GFX2DAXI + n] = clk_hw_register_gate(NULL, gd->name,
+			    gd->parent_name, gd->flags, gbase + REG_CLKENABLE,
+			    gd->bit_idx, 0, &lock);
+	}
+
+	/* cpuclk divider is fixed to 1 */
+	hws[CLKID_CPU] =
+		clk_hw_register_fixed_factor(NULL, "cpu", clk_names[CPUPLL],
+					  0, 1, 1);
+	/* twdclk is derived from cpu/3 */
+	hws[CLKID_TWD] =
+		clk_hw_register_fixed_factor(NULL, "twd", "cpu", 0, 1, 3);
+
+	/* check for errors on leaf clocks */
+	for (n = 0; n < MAX_CLKS; n++) {
+		if (!IS_ERR(hws[n]))
+			continue;
+
+		pr_err("%pOF: Unable to register leaf clock %d\n", np, n);
+		goto bg2q_fail;
+	}
+
+	/* register clk-provider */
+	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
+
+	return;
+
+bg2q_fail:
+	iounmap(cpupll_base);
+	iounmap(gbase);
+}
+CLK_OF_DECLARE(berlin2q_clk, "marvell,berlin2q-clk",
+	       berlin2q_clock_setup);