Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 488 insertions, 0 deletions

diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
new file mode 100644
index 000000000..eea32f87c
--- /dev/null
+++ b/drivers/clk/imx/clk-pllv3.c
@@ -0,0 +1,488 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define PLL_NUM_OFFSET		0x10
+#define PLL_DENOM_OFFSET	0x20
+#define PLL_IMX7_NUM_OFFSET	0x20
+#define PLL_IMX7_DENOM_OFFSET	0x30
+
+#define PLL_VF610_NUM_OFFSET	0x20
+#define PLL_VF610_DENOM_OFFSET	0x30
+
+#define BM_PLL_POWER		(0x1 << 12)
+#define BM_PLL_LOCK		(0x1 << 31)
+#define IMX7_ENET_PLL_POWER	(0x1 << 5)
+#define IMX7_DDR_PLL_POWER	(0x1 << 20)
+
+#define PLL_LOCK_TIMEOUT	10000
+
+/**
+ * struct clk_pllv3 - IMX PLL clock version 3
+ * @hw:		clock source
+ * @base:	 base address of PLL registers
+ * @power_bit:	 pll power bit mask
+ * @powerup_set: set power_bit to power up the PLL
+ * @div_mask:	 mask of divider bits
+ * @div_shift:	 shift of divider bits
+ * @ref_clock:	reference clock rate
+ * @num_offset:	num register offset
+ * @denom_offset: denom register offset
+ *
+ * IMX PLL clock version 3, found on i.MX6 series.  Divider for pllv3
+ * is actually a multiplier, and always sits at bit 0.
+ */
+struct clk_pllv3 {
+	struct clk_hw	hw;
+	void __iomem	*base;
+	u32		power_bit;
+	bool		powerup_set;
+	u32		div_mask;
+	u32		div_shift;
+	unsigned long	ref_clock;
+	u32		num_offset;
+	u32		denom_offset;
+};
+
+#define to_clk_pllv3(_hw) container_of(_hw, struct clk_pllv3, hw)
+
+static int clk_pllv3_wait_lock(struct clk_pllv3 *pll)
+{
+	u32 val = readl_relaxed(pll->base) & pll->power_bit;
+
+	/* No need to wait for lock when pll is not powered up */
+	if ((pll->powerup_set && !val) || (!pll->powerup_set && val))
+		return 0;
+
+	return readl_relaxed_poll_timeout(pll->base, val, val & BM_PLL_LOCK,
+					  500, PLL_LOCK_TIMEOUT);
+}
+
+static int clk_pllv3_prepare(struct clk_hw *hw)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base);
+	if (pll->powerup_set)
+		val |= pll->power_bit;
+	else
+		val &= ~pll->power_bit;
+	writel_relaxed(val, pll->base);
+
+	return clk_pllv3_wait_lock(pll);
+}
+
+static void clk_pllv3_unprepare(struct clk_hw *hw)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base);
+	if (pll->powerup_set)
+		val &= ~pll->power_bit;
+	else
+		val |= pll->power_bit;
+	writel_relaxed(val, pll->base);
+}
+
+static int clk_pllv3_is_prepared(struct clk_hw *hw)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+
+	if (readl_relaxed(pll->base) & BM_PLL_LOCK)
+		return 1;
+
+	return 0;
+}
+
+static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw,
+					   unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 div = (readl_relaxed(pll->base) >> pll->div_shift)  & pll->div_mask;
+
+	return (div == 1) ? parent_rate * 22 : parent_rate * 20;
+}
+
+static long clk_pllv3_round_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long *prate)
+{
+	unsigned long parent_rate = *prate;
+
+	return (rate >= parent_rate * 22) ? parent_rate * 22 :
+					    parent_rate * 20;
+}
+
+static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 val, div;
+
+	if (rate == parent_rate * 22)
+		div = 1;
+	else if (rate == parent_rate * 20)
+		div = 0;
+	else
+		return -EINVAL;
+
+	val = readl_relaxed(pll->base);
+	val &= ~(pll->div_mask << pll->div_shift);
+	val |= (div << pll->div_shift);
+	writel_relaxed(val, pll->base);
+
+	return clk_pllv3_wait_lock(pll);
+}
+
+static const struct clk_ops clk_pllv3_ops = {
+	.prepare	= clk_pllv3_prepare,
+	.unprepare	= clk_pllv3_unprepare,
+	.is_prepared	= clk_pllv3_is_prepared,
+	.recalc_rate	= clk_pllv3_recalc_rate,
+	.round_rate	= clk_pllv3_round_rate,
+	.set_rate	= clk_pllv3_set_rate,
+};
+
+static unsigned long clk_pllv3_sys_recalc_rate(struct clk_hw *hw,
+					       unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 div = readl_relaxed(pll->base) & pll->div_mask;
+
+	return parent_rate * div / 2;
+}
+
+static long clk_pllv3_sys_round_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long *prate)
+{
+	unsigned long parent_rate = *prate;
+	unsigned long min_rate = parent_rate * 54 / 2;
+	unsigned long max_rate = parent_rate * 108 / 2;
+	u32 div;
+
+	if (rate > max_rate)
+		rate = max_rate;
+	else if (rate < min_rate)
+		rate = min_rate;
+	div = rate * 2 / parent_rate;
+
+	return parent_rate * div / 2;
+}
+
+static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	unsigned long min_rate = parent_rate * 54 / 2;
+	unsigned long max_rate = parent_rate * 108 / 2;
+	u32 val, div;
+
+	if (rate < min_rate || rate > max_rate)
+		return -EINVAL;
+
+	div = rate * 2 / parent_rate;
+	val = readl_relaxed(pll->base);
+	val &= ~pll->div_mask;
+	val |= div;
+	writel_relaxed(val, pll->base);
+
+	return clk_pllv3_wait_lock(pll);
+}
+
+static const struct clk_ops clk_pllv3_sys_ops = {
+	.prepare	= clk_pllv3_prepare,
+	.unprepare	= clk_pllv3_unprepare,
+	.is_prepared	= clk_pllv3_is_prepared,
+	.recalc_rate	= clk_pllv3_sys_recalc_rate,
+	.round_rate	= clk_pllv3_sys_round_rate,
+	.set_rate	= clk_pllv3_sys_set_rate,
+};
+
+static unsigned long clk_pllv3_av_recalc_rate(struct clk_hw *hw,
+					      unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 mfn = readl_relaxed(pll->base + pll->num_offset);
+	u32 mfd = readl_relaxed(pll->base + pll->denom_offset);
+	u32 div = readl_relaxed(pll->base) & pll->div_mask;
+	u64 temp64 = (u64)parent_rate;
+
+	temp64 *= mfn;
+	do_div(temp64, mfd);
+
+	return parent_rate * div + (unsigned long)temp64;
+}
+
+static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long *prate)
+{
+	unsigned long parent_rate = *prate;
+	unsigned long min_rate = parent_rate * 27;
+	unsigned long max_rate = parent_rate * 54;
+	u32 div;
+	u32 mfn, mfd = 1000000;
+	u32 max_mfd = 0x3FFFFFFF;
+	u64 temp64;
+
+	if (rate > max_rate)
+		rate = max_rate;
+	else if (rate < min_rate)
+		rate = min_rate;
+
+	if (parent_rate <= max_mfd)
+		mfd = parent_rate;
+
+	div = rate / parent_rate;
+	temp64 = (u64) (rate - div * parent_rate);
+	temp64 *= mfd;
+	temp64 = div64_ul(temp64, parent_rate);
+	mfn = temp64;
+
+	temp64 = (u64)parent_rate;
+	temp64 *= mfn;
+	do_div(temp64, mfd);
+
+	return parent_rate * div + (unsigned long)temp64;
+}
+
+static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	unsigned long min_rate = parent_rate * 27;
+	unsigned long max_rate = parent_rate * 54;
+	u32 val, div;
+	u32 mfn, mfd = 1000000;
+	u32 max_mfd = 0x3FFFFFFF;
+	u64 temp64;
+
+	if (rate < min_rate || rate > max_rate)
+		return -EINVAL;
+
+	if (parent_rate <= max_mfd)
+		mfd = parent_rate;
+
+	div = rate / parent_rate;
+	temp64 = (u64) (rate - div * parent_rate);
+	temp64 *= mfd;
+	temp64 = div64_ul(temp64, parent_rate);
+	mfn = temp64;
+
+	val = readl_relaxed(pll->base);
+	val &= ~pll->div_mask;
+	val |= div;
+	writel_relaxed(val, pll->base);
+	writel_relaxed(mfn, pll->base + pll->num_offset);
+	writel_relaxed(mfd, pll->base + pll->denom_offset);
+
+	return clk_pllv3_wait_lock(pll);
+}
+
+static const struct clk_ops clk_pllv3_av_ops = {
+	.prepare	= clk_pllv3_prepare,
+	.unprepare	= clk_pllv3_unprepare,
+	.is_prepared	= clk_pllv3_is_prepared,
+	.recalc_rate	= clk_pllv3_av_recalc_rate,
+	.round_rate	= clk_pllv3_av_round_rate,
+	.set_rate	= clk_pllv3_av_set_rate,
+};
+
+struct clk_pllv3_vf610_mf {
+	u32 mfi;	/* integer part, can be 20 or 22 */
+	u32 mfn;	/* numerator, 30-bit value */
+	u32 mfd;	/* denominator, 30-bit value, must be less than mfn */
+};
+
+static unsigned long clk_pllv3_vf610_mf_to_rate(unsigned long parent_rate,
+		struct clk_pllv3_vf610_mf mf)
+{
+	u64 temp64;
+
+	temp64 = parent_rate;
+	temp64 *= mf.mfn;
+	do_div(temp64, mf.mfd);
+
+	return (parent_rate * mf.mfi) + temp64;
+}
+
+static struct clk_pllv3_vf610_mf clk_pllv3_vf610_rate_to_mf(
+		unsigned long parent_rate, unsigned long rate)
+{
+	struct clk_pllv3_vf610_mf mf;
+	u64 temp64;
+
+	mf.mfi = (rate >= 22 * parent_rate) ? 22 : 20;
+	mf.mfd = 0x3fffffff;	/* use max supported value for best accuracy */
+
+	if (rate <= parent_rate * mf.mfi)
+		mf.mfn = 0;
+	else if (rate >= parent_rate * (mf.mfi + 1))
+		mf.mfn = mf.mfd - 1;
+	else {
+		/* rate = parent_rate * (mfi + mfn/mfd) */
+		temp64 = rate - parent_rate * mf.mfi;
+		temp64 *= mf.mfd;
+		temp64 = div64_ul(temp64, parent_rate);
+		mf.mfn = temp64;
+	}
+
+	return mf;
+}
+
+static unsigned long clk_pllv3_vf610_recalc_rate(struct clk_hw *hw,
+					      unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	struct clk_pllv3_vf610_mf mf;
+
+	mf.mfn = readl_relaxed(pll->base + pll->num_offset);
+	mf.mfd = readl_relaxed(pll->base + pll->denom_offset);
+	mf.mfi = (readl_relaxed(pll->base) & pll->div_mask) ? 22 : 20;
+
+	return clk_pllv3_vf610_mf_to_rate(parent_rate, mf);
+}
+
+static long clk_pllv3_vf610_round_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long *prate)
+{
+	struct clk_pllv3_vf610_mf mf = clk_pllv3_vf610_rate_to_mf(*prate, rate);
+
+	return clk_pllv3_vf610_mf_to_rate(*prate, mf);
+}
+
+static int clk_pllv3_vf610_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	struct clk_pllv3_vf610_mf mf =
+			clk_pllv3_vf610_rate_to_mf(parent_rate, rate);
+	u32 val;
+
+	val = readl_relaxed(pll->base);
+	if (mf.mfi == 20)
+		val &= ~pll->div_mask;	/* clear bit for mfi=20 */
+	else
+		val |= pll->div_mask;	/* set bit for mfi=22 */
+	writel_relaxed(val, pll->base);
+
+	writel_relaxed(mf.mfn, pll->base + pll->num_offset);
+	writel_relaxed(mf.mfd, pll->base + pll->denom_offset);
+
+	return clk_pllv3_wait_lock(pll);
+}
+
+static const struct clk_ops clk_pllv3_vf610_ops = {
+	.prepare	= clk_pllv3_prepare,
+	.unprepare	= clk_pllv3_unprepare,
+	.is_prepared	= clk_pllv3_is_prepared,
+	.recalc_rate	= clk_pllv3_vf610_recalc_rate,
+	.round_rate	= clk_pllv3_vf610_round_rate,
+	.set_rate	= clk_pllv3_vf610_set_rate,
+};
+
+static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+
+	return pll->ref_clock;
+}
+
+static const struct clk_ops clk_pllv3_enet_ops = {
+	.prepare	= clk_pllv3_prepare,
+	.unprepare	= clk_pllv3_unprepare,
+	.is_prepared	= clk_pllv3_is_prepared,
+	.recalc_rate	= clk_pllv3_enet_recalc_rate,
+};
+
+struct clk_hw *imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name,
+			  const char *parent_name, void __iomem *base,
+			  u32 div_mask)
+{
+	struct clk_pllv3 *pll;
+	const struct clk_ops *ops;
+	struct clk_hw *hw;
+	struct clk_init_data init;
+	int ret;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	pll->power_bit = BM_PLL_POWER;
+	pll->num_offset = PLL_NUM_OFFSET;
+	pll->denom_offset = PLL_DENOM_OFFSET;
+
+	switch (type) {
+	case IMX_PLLV3_SYS:
+		ops = &clk_pllv3_sys_ops;
+		break;
+	case IMX_PLLV3_SYS_VF610:
+		ops = &clk_pllv3_vf610_ops;
+		pll->num_offset = PLL_VF610_NUM_OFFSET;
+		pll->denom_offset = PLL_VF610_DENOM_OFFSET;
+		break;
+	case IMX_PLLV3_USB_VF610:
+		pll->div_shift = 1;
+		fallthrough;
+	case IMX_PLLV3_USB:
+		ops = &clk_pllv3_ops;
+		pll->powerup_set = true;
+		break;
+	case IMX_PLLV3_AV_IMX7:
+		pll->num_offset = PLL_IMX7_NUM_OFFSET;
+		pll->denom_offset = PLL_IMX7_DENOM_OFFSET;
+		fallthrough;
+	case IMX_PLLV3_AV:
+		ops = &clk_pllv3_av_ops;
+		break;
+	case IMX_PLLV3_ENET_IMX7:
+		pll->power_bit = IMX7_ENET_PLL_POWER;
+		pll->ref_clock = 1000000000;
+		ops = &clk_pllv3_enet_ops;
+		break;
+	case IMX_PLLV3_ENET:
+		pll->ref_clock = 500000000;
+		ops = &clk_pllv3_enet_ops;
+		break;
+	case IMX_PLLV3_DDR_IMX7:
+		pll->power_bit = IMX7_DDR_PLL_POWER;
+		pll->num_offset = PLL_IMX7_NUM_OFFSET;
+		pll->denom_offset = PLL_IMX7_DENOM_OFFSET;
+		ops = &clk_pllv3_av_ops;
+		break;
+	default:
+		ops = &clk_pllv3_ops;
+	}
+	pll->base = base;
+	pll->div_mask = div_mask;
+
+	init.name = name;
+	init.ops = ops;
+	init.flags = 0;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	pll->hw.init = &init;
+	hw = &pll->hw;
+
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(pll);
+		return ERR_PTR(ret);
+	}
+
+	return hw;
+}