Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 446 insertions, 0 deletions

diff --git a/drivers/clk/ingenic/jz4760-cgu.c b/drivers/clk/ingenic/jz4760-cgu.c
new file mode 100644
index 000000000..e407f00bd
--- /dev/null
+++ b/drivers/clk/ingenic/jz4760-cgu.c
@@ -0,0 +1,446 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ4760 SoC CGU driver
+ * Copyright 2018, Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+#include <linux/clk.h>
+
+#include <dt-bindings/clock/ingenic,jz4760-cgu.h>
+
+#include "cgu.h"
+#include "pm.h"
+
+#define MHZ (1000 * 1000)
+
+/*
+ * CPM registers offset address definition
+ */
+#define CGU_REG_CPCCR		0x00
+#define CGU_REG_LCR		0x04
+#define CGU_REG_CPPCR0		0x10
+#define CGU_REG_CLKGR0		0x20
+#define CGU_REG_OPCR		0x24
+#define CGU_REG_CLKGR1		0x28
+#define CGU_REG_CPPCR1		0x30
+#define CGU_REG_USBPCR		0x3c
+#define CGU_REG_USBCDR		0x50
+#define CGU_REG_I2SCDR		0x60
+#define CGU_REG_LPCDR		0x64
+#define CGU_REG_MSCCDR		0x68
+#define CGU_REG_UHCCDR		0x6c
+#define CGU_REG_SSICDR		0x74
+#define CGU_REG_CIMCDR		0x7c
+#define CGU_REG_GPSCDR		0x80
+#define CGU_REG_PCMCDR		0x84
+#define CGU_REG_GPUCDR		0x88
+
+static const s8 pll_od_encoding[8] = {
+	0x0, 0x1, -1, 0x2, -1, -1, -1, 0x3,
+};
+
+static const u8 jz4760_cgu_cpccr_div_table[] = {
+	1, 2, 3, 4, 6, 8,
+};
+
+static const u8 jz4760_cgu_pll_half_div_table[] = {
+	2, 1,
+};
+
+static void
+jz4760_cgu_calc_m_n_od(const struct ingenic_cgu_pll_info *pll_info,
+		       unsigned long rate, unsigned long parent_rate,
+		       unsigned int *pm, unsigned int *pn, unsigned int *pod)
+{
+	unsigned int m, n, od, m_max = (1 << pll_info->m_bits) - 1;
+
+	/* The frequency after the N divider must be between 1 and 50 MHz. */
+	n = parent_rate / (1 * MHZ);
+
+	/* The N divider must be >= 2. */
+	n = clamp_val(n, 2, 1 << pll_info->n_bits);
+
+	rate /= MHZ;
+	parent_rate /= MHZ;
+
+	for (m = m_max; m >= m_max && n >= 2; n--) {
+		m = rate * n / parent_rate;
+		od = m & 1;
+		m <<= od;
+	}
+
+	*pm = m;
+	*pn = n + 1;
+	*pod = 1 << od;
+}
+
+static const struct ingenic_cgu_clk_info jz4760_cgu_clocks[] = {
+
+	/* External clocks */
+
+	[JZ4760_CLK_EXT] = { "ext", CGU_CLK_EXT },
+	[JZ4760_CLK_OSC32K] = { "osc32k", CGU_CLK_EXT },
+
+	/* PLLs */
+
+	[JZ4760_CLK_PLL0] = {
+		"pll0", CGU_CLK_PLL,
+		.parents = { JZ4760_CLK_EXT },
+		.pll = {
+			.reg = CGU_REG_CPPCR0,
+			.rate_multiplier = 1,
+			.m_shift = 23,
+			.m_bits = 8,
+			.m_offset = 0,
+			.n_shift = 18,
+			.n_bits = 4,
+			.n_offset = 0,
+			.od_shift = 16,
+			.od_bits = 2,
+			.od_max = 8,
+			.od_encoding = pll_od_encoding,
+			.bypass_reg = CGU_REG_CPPCR0,
+			.bypass_bit = 9,
+			.enable_bit = 8,
+			.stable_bit = 10,
+			.calc_m_n_od = jz4760_cgu_calc_m_n_od,
+		},
+	},
+
+	[JZ4760_CLK_PLL1] = {
+		/* TODO: PLL1 can depend on PLL0 */
+		"pll1", CGU_CLK_PLL,
+		.parents = { JZ4760_CLK_EXT },
+		.pll = {
+			.reg = CGU_REG_CPPCR1,
+			.rate_multiplier = 1,
+			.m_shift = 23,
+			.m_bits = 8,
+			.m_offset = 0,
+			.n_shift = 18,
+			.n_bits = 4,
+			.n_offset = 0,
+			.od_shift = 16,
+			.od_bits = 2,
+			.od_max = 8,
+			.od_encoding = pll_od_encoding,
+			.bypass_bit = -1,
+			.enable_bit = 7,
+			.stable_bit = 6,
+			.calc_m_n_od = jz4760_cgu_calc_m_n_od,
+		},
+	},
+
+	/* Main clocks */
+
+	[JZ4760_CLK_CCLK] = {
+		"cclk", CGU_CLK_DIV,
+		/*
+		 * Disabling the CPU clock or any parent clocks will hang the
+		 * system; mark it critical.
+		 */
+		.flags = CLK_IS_CRITICAL,
+		.parents = { JZ4760_CLK_PLL0, },
+		.div = {
+			CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1, 0,
+			jz4760_cgu_cpccr_div_table,
+		},
+	},
+	[JZ4760_CLK_HCLK] = {
+		"hclk", CGU_CLK_DIV,
+		.parents = { JZ4760_CLK_PLL0, },
+		.div = {
+			CGU_REG_CPCCR, 4, 1, 4, 22, -1, -1, 0,
+			jz4760_cgu_cpccr_div_table,
+		},
+	},
+	[JZ4760_CLK_SCLK] = {
+		"sclk", CGU_CLK_DIV,
+		.parents = { JZ4760_CLK_PLL0, },
+		.div = {
+			CGU_REG_CPCCR, 24, 1, 4, 22, -1, -1, 0,
+			jz4760_cgu_cpccr_div_table,
+		},
+	},
+	[JZ4760_CLK_H2CLK] = {
+		"h2clk", CGU_CLK_DIV,
+		.parents = { JZ4760_CLK_PLL0, },
+		.div = {
+			CGU_REG_CPCCR, 16, 1, 4, 22, -1, -1, 0,
+			jz4760_cgu_cpccr_div_table,
+		},
+	},
+	[JZ4760_CLK_MCLK] = {
+		"mclk", CGU_CLK_DIV,
+		/*
+		 * Disabling MCLK or its parents will render DRAM
+		 * inaccessible; mark it critical.
+		 */
+		.flags = CLK_IS_CRITICAL,
+		.parents = { JZ4760_CLK_PLL0, },
+		.div = {
+			CGU_REG_CPCCR, 12, 1, 4, 22, -1, -1, 0,
+			jz4760_cgu_cpccr_div_table,
+		},
+	},
+	[JZ4760_CLK_PCLK] = {
+		"pclk", CGU_CLK_DIV,
+		.parents = { JZ4760_CLK_PLL0, },
+		.div = {
+			CGU_REG_CPCCR, 8, 1, 4, 22, -1, -1, 0,
+			jz4760_cgu_cpccr_div_table,
+		},
+	},
+
+	/* Divided clocks */
+
+	[JZ4760_CLK_PLL0_HALF] = {
+		"pll0_half", CGU_CLK_DIV,
+		.parents = { JZ4760_CLK_PLL0 },
+		.div = {
+			CGU_REG_CPCCR, 21, 1, 1, 22, -1, -1, 0,
+			jz4760_cgu_pll_half_div_table,
+		},
+	},
+
+	/* Those divided clocks can connect to PLL0 or PLL1 */
+
+	[JZ4760_CLK_UHC] = {
+		"uhc", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4760_CLK_PLL0_HALF, JZ4760_CLK_PLL1, },
+		.mux = { CGU_REG_UHCCDR, 31, 1 },
+		.div = { CGU_REG_UHCCDR, 0, 1, 4, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 24 },
+	},
+	[JZ4760_CLK_GPU] = {
+		"gpu", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4760_CLK_PLL0_HALF, JZ4760_CLK_PLL1, },
+		.mux = { CGU_REG_GPUCDR, 31, 1 },
+		.div = { CGU_REG_GPUCDR, 0, 1, 3, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR1, 9 },
+	},
+	[JZ4760_CLK_LPCLK_DIV] = {
+		"lpclk_div", CGU_CLK_DIV | CGU_CLK_MUX,
+		.parents = { JZ4760_CLK_PLL0_HALF, JZ4760_CLK_PLL1, },
+		.mux = { CGU_REG_LPCDR, 29, 1 },
+		.div = { CGU_REG_LPCDR, 0, 1, 11, -1, -1, -1 },
+	},
+	[JZ4760_CLK_TVE] = {
+		"tve", CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4760_CLK_LPCLK_DIV, JZ4760_CLK_EXT, },
+		.mux = { CGU_REG_LPCDR, 31, 1 },
+		.gate = { CGU_REG_CLKGR0, 27 },
+	},
+	[JZ4760_CLK_LPCLK] = {
+		"lpclk", CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4760_CLK_LPCLK_DIV, JZ4760_CLK_TVE, },
+		.mux = { CGU_REG_LPCDR, 30, 1 },
+		.gate = { CGU_REG_CLKGR0, 28 },
+	},
+	[JZ4760_CLK_GPS] = {
+		"gps", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4760_CLK_PLL0_HALF, JZ4760_CLK_PLL1, },
+		.mux = { CGU_REG_GPSCDR, 31, 1 },
+		.div = { CGU_REG_GPSCDR, 0, 1, 4, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 22 },
+	},
+
+	/* Those divided clocks can connect to EXT, PLL0 or PLL1 */
+
+	[JZ4760_CLK_PCM] = {
+		"pcm", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4760_CLK_EXT, -1,
+			JZ4760_CLK_PLL0_HALF, JZ4760_CLK_PLL1 },
+		.mux = { CGU_REG_PCMCDR, 30, 2 },
+		.div = { CGU_REG_PCMCDR, 0, 1, 9, -1, -1, -1, BIT(0) },
+		.gate = { CGU_REG_CLKGR1, 8 },
+	},
+	[JZ4760_CLK_I2S] = {
+		"i2s", CGU_CLK_DIV | CGU_CLK_MUX,
+		.parents = { JZ4760_CLK_EXT, -1,
+			JZ4760_CLK_PLL0_HALF, JZ4760_CLK_PLL1 },
+		.mux = { CGU_REG_I2SCDR, 30, 2 },
+		.div = { CGU_REG_I2SCDR, 0, 1, 9, -1, -1, -1, BIT(0) },
+	},
+	[JZ4760_CLK_OTG] = {
+		"usb", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4760_CLK_EXT, -1,
+			JZ4760_CLK_PLL0_HALF, JZ4760_CLK_PLL1 },
+		.mux = { CGU_REG_USBCDR, 30, 2 },
+		.div = { CGU_REG_USBCDR, 0, 1, 8, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 2 },
+	},
+
+	/* Those divided clocks can connect to EXT or PLL0 */
+	[JZ4760_CLK_MMC_MUX] = {
+		"mmc_mux", CGU_CLK_MUX | CGU_CLK_DIV,
+		.parents = { JZ4760_CLK_EXT, JZ4760_CLK_PLL0_HALF, },
+		.mux = { CGU_REG_MSCCDR, 31, 1 },
+		.div = { CGU_REG_MSCCDR, 0, 1, 6, -1, -1, -1, BIT(0) },
+	},
+	[JZ4760_CLK_SSI_MUX] = {
+		"ssi_mux", CGU_CLK_DIV | CGU_CLK_MUX,
+		.parents = { JZ4760_CLK_EXT, JZ4760_CLK_PLL0_HALF, },
+		.mux = { CGU_REG_SSICDR, 31, 1 },
+		.div = { CGU_REG_SSICDR, 0, 1, 6, -1, -1, -1, BIT(0) },
+	},
+
+	/* These divided clock can connect to PLL0 only */
+	[JZ4760_CLK_CIM] = {
+		"cim", CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_PLL0_HALF },
+		.div = { CGU_REG_CIMCDR, 0, 1, 8, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 26 },
+	},
+
+	/* Gate-only clocks */
+
+	[JZ4760_CLK_SSI0] = {
+		"ssi0", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_SSI_MUX, },
+		.gate = { CGU_REG_CLKGR0, 4 },
+	},
+	[JZ4760_CLK_SSI1] = {
+		"ssi1", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_SSI_MUX, },
+		.gate = { CGU_REG_CLKGR0, 19 },
+	},
+	[JZ4760_CLK_SSI2] = {
+		"ssi2", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_SSI_MUX, },
+		.gate = { CGU_REG_CLKGR0, 20 },
+	},
+	[JZ4760_CLK_DMA] = {
+		"dma", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_H2CLK, },
+		.gate = { CGU_REG_CLKGR0, 21 },
+	},
+	[JZ4760_CLK_MDMA] = {
+		"mdma", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_HCLK, },
+		.gate = { CGU_REG_CLKGR0, 25 },
+	},
+	[JZ4760_CLK_BDMA] = {
+		"bdma", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_HCLK, },
+		.gate = { CGU_REG_CLKGR1, 0 },
+	},
+	[JZ4760_CLK_I2C0] = {
+		"i2c0", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 5 },
+	},
+	[JZ4760_CLK_I2C1] = {
+		"i2c1", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 6 },
+	},
+	[JZ4760_CLK_UART0] = {
+		"uart0", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 15 },
+	},
+	[JZ4760_CLK_UART1] = {
+		"uart1", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 16 },
+	},
+	[JZ4760_CLK_UART2] = {
+		"uart2", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 17 },
+	},
+	[JZ4760_CLK_UART3] = {
+		"uart3", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 18 },
+	},
+	[JZ4760_CLK_IPU] = {
+		"ipu", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_HCLK, },
+		.gate = { CGU_REG_CLKGR0, 29 },
+	},
+	[JZ4760_CLK_ADC] = {
+		"adc", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 14 },
+	},
+	[JZ4760_CLK_AIC] = {
+		"aic", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 8 },
+	},
+	[JZ4760_CLK_VPU] = {
+		"vpu", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_HCLK, },
+		.gate = { CGU_REG_LCR, 30, false, 150 },
+	},
+	[JZ4760_CLK_MMC0] = {
+		"mmc0", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_MMC_MUX, },
+		.gate = { CGU_REG_CLKGR0, 3 },
+	},
+	[JZ4760_CLK_MMC1] = {
+		"mmc1", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_MMC_MUX, },
+		.gate = { CGU_REG_CLKGR0, 11 },
+	},
+	[JZ4760_CLK_MMC2] = {
+		"mmc2", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_MMC_MUX, },
+		.gate = { CGU_REG_CLKGR0, 12 },
+	},
+	[JZ4760_CLK_UHC_PHY] = {
+		"uhc_phy", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_UHC, },
+		.gate = { CGU_REG_OPCR, 5 },
+	},
+	[JZ4760_CLK_OTG_PHY] = {
+		"usb_phy", CGU_CLK_GATE,
+		.parents = { JZ4760_CLK_OTG },
+		.gate = { CGU_REG_OPCR, 7, true, 50 },
+	},
+
+	/* Custom clocks */
+	[JZ4760_CLK_EXT512] = {
+		"ext/512", CGU_CLK_FIXDIV,
+		.parents = { JZ4760_CLK_EXT },
+		.fixdiv = { 512 },
+	},
+	[JZ4760_CLK_RTC] = {
+		"rtc", CGU_CLK_MUX,
+		.parents = { JZ4760_CLK_EXT512, JZ4760_CLK_OSC32K, },
+		.mux = { CGU_REG_OPCR, 2, 1},
+	},
+};
+
+static void __init jz4760_cgu_init(struct device_node *np)
+{
+	struct ingenic_cgu *cgu;
+	int retval;
+
+	cgu = ingenic_cgu_new(jz4760_cgu_clocks,
+			      ARRAY_SIZE(jz4760_cgu_clocks), np);
+	if (!cgu) {
+		pr_err("%s: failed to initialise CGU\n", __func__);
+		return;
+	}
+
+	retval = ingenic_cgu_register_clocks(cgu);
+	if (retval)
+		pr_err("%s: failed to register CGU Clocks\n", __func__);
+
+	ingenic_cgu_register_syscore_ops(cgu);
+}
+
+/* We only probe via devicetree, no need for a platform driver */
+CLK_OF_DECLARE_DRIVER(jz4760_cgu, "ingenic,jz4760-cgu", jz4760_cgu_init);
+
+/* JZ4760B has some small differences, but we don't implement them. */
+CLK_OF_DECLARE_DRIVER(jz4760b_cgu, "ingenic,jz4760b-cgu", jz4760_cgu_init);