Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 201 insertions, 0 deletions

diff --git a/drivers/clk/mvebu/dove.c b/drivers/clk/mvebu/dove.c
new file mode 100644
index 000000000..0bd09d33f
--- /dev/null
+++ b/drivers/clk/mvebu/dove.c
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell Dove SoC clocks
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include "common.h"
+#include "dove-divider.h"
+
+/*
+ * Core Clocks
+ *
+ * Dove PLL sample-at-reset configuration
+ *
+ * SAR0[8:5]   : CPU frequency
+ *		 5  = 1000 MHz
+ *		 6  =  933 MHz
+ *		 7  =  933 MHz
+ *		 8  =  800 MHz
+ *		 9  =  800 MHz
+ *		 10 =  800 MHz
+ *		 11 = 1067 MHz
+ *		 12 =  667 MHz
+ *		 13 =  533 MHz
+ *		 14 =  400 MHz
+ *		 15 =  333 MHz
+ *		 others reserved.
+ *
+ * SAR0[11:9]  : CPU to L2 Clock divider ratio
+ *		 0 = (1/1) * CPU
+ *		 2 = (1/2) * CPU
+ *		 4 = (1/3) * CPU
+ *		 6 = (1/4) * CPU
+ *		 others reserved.
+ *
+ * SAR0[15:12] : CPU to DDR DRAM Clock divider ratio
+ *		 0  = (1/1) * CPU
+ *		 2  = (1/2) * CPU
+ *		 3  = (2/5) * CPU
+ *		 4  = (1/3) * CPU
+ *		 6  = (1/4) * CPU
+ *		 8  = (1/5) * CPU
+ *		 10 = (1/6) * CPU
+ *		 12 = (1/7) * CPU
+ *		 14 = (1/8) * CPU
+ *		 15 = (1/10) * CPU
+ *		 others reserved.
+ *
+ * SAR0[24:23] : TCLK frequency
+ *		 0 = 166 MHz
+ *		 1 = 125 MHz
+ *		 others reserved.
+ */
+
+#define SAR_DOVE_CPU_FREQ		5
+#define SAR_DOVE_CPU_FREQ_MASK		0xf
+#define SAR_DOVE_L2_RATIO		9
+#define SAR_DOVE_L2_RATIO_MASK		0x7
+#define SAR_DOVE_DDR_RATIO		12
+#define SAR_DOVE_DDR_RATIO_MASK		0xf
+#define SAR_DOVE_TCLK_FREQ		23
+#define SAR_DOVE_TCLK_FREQ_MASK		0x3
+
+enum { DOVE_CPU_TO_L2, DOVE_CPU_TO_DDR };
+
+static const struct coreclk_ratio dove_coreclk_ratios[] __initconst = {
+	{ .id = DOVE_CPU_TO_L2, .name = "l2clk", },
+	{ .id = DOVE_CPU_TO_DDR, .name = "ddrclk", }
+};
+
+static const u32 dove_tclk_freqs[] __initconst = {
+	166666667,
+	125000000,
+	0, 0
+};
+
+static u32 __init dove_get_tclk_freq(void __iomem *sar)
+{
+	u32 opt = (readl(sar) >> SAR_DOVE_TCLK_FREQ) &
+		SAR_DOVE_TCLK_FREQ_MASK;
+	return dove_tclk_freqs[opt];
+}
+
+static const u32 dove_cpu_freqs[] __initconst = {
+	0, 0, 0, 0, 0,
+	1000000000,
+	933333333, 933333333,
+	800000000, 800000000, 800000000,
+	1066666667,
+	666666667,
+	533333333,
+	400000000,
+	333333333
+};
+
+static u32 __init dove_get_cpu_freq(void __iomem *sar)
+{
+	u32 opt = (readl(sar) >> SAR_DOVE_CPU_FREQ) &
+		SAR_DOVE_CPU_FREQ_MASK;
+	return dove_cpu_freqs[opt];
+}
+
+static const int dove_cpu_l2_ratios[8][2] __initconst = {
+	{ 1, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 },
+	{ 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 }
+};
+
+static const int dove_cpu_ddr_ratios[16][2] __initconst = {
+	{ 1, 1 }, { 0, 1 }, { 1, 2 }, { 2, 5 },
+	{ 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 },
+	{ 1, 5 }, { 0, 1 }, { 1, 6 }, { 0, 1 },
+	{ 1, 7 }, { 0, 1 }, { 1, 8 }, { 1, 10 }
+};
+
+static void __init dove_get_clk_ratio(
+	void __iomem *sar, int id, int *mult, int *div)
+{
+	switch (id) {
+	case DOVE_CPU_TO_L2:
+	{
+		u32 opt = (readl(sar) >> SAR_DOVE_L2_RATIO) &
+			SAR_DOVE_L2_RATIO_MASK;
+		*mult = dove_cpu_l2_ratios[opt][0];
+		*div = dove_cpu_l2_ratios[opt][1];
+		break;
+	}
+	case DOVE_CPU_TO_DDR:
+	{
+		u32 opt = (readl(sar) >> SAR_DOVE_DDR_RATIO) &
+			SAR_DOVE_DDR_RATIO_MASK;
+		*mult = dove_cpu_ddr_ratios[opt][0];
+		*div = dove_cpu_ddr_ratios[opt][1];
+		break;
+	}
+	}
+}
+
+static const struct coreclk_soc_desc dove_coreclks = {
+	.get_tclk_freq = dove_get_tclk_freq,
+	.get_cpu_freq = dove_get_cpu_freq,
+	.get_clk_ratio = dove_get_clk_ratio,
+	.ratios = dove_coreclk_ratios,
+	.num_ratios = ARRAY_SIZE(dove_coreclk_ratios),
+};
+
+/*
+ * Clock Gating Control
+ */
+
+static const struct clk_gating_soc_desc dove_gating_desc[] __initconst = {
+	{ "usb0", NULL, 0, 0 },
+	{ "usb1", NULL, 1, 0 },
+	{ "ge",	"gephy", 2, 0 },
+	{ "sata", NULL, 3, 0 },
+	{ "pex0", NULL, 4, 0 },
+	{ "pex1", NULL, 5, 0 },
+	{ "sdio0", NULL, 8, 0 },
+	{ "sdio1", NULL, 9, 0 },
+	{ "nand", NULL, 10, 0 },
+	{ "camera", NULL, 11, 0 },
+	{ "i2s0", NULL, 12, 0 },
+	{ "i2s1", NULL, 13, 0 },
+	{ "crypto", NULL, 15, 0 },
+	{ "ac97", NULL, 21, 0 },
+	{ "pdma", NULL, 22, 0 },
+	{ "xor0", NULL, 23, 0 },
+	{ "xor1", NULL, 24, 0 },
+	{ "gephy", NULL, 30, 0 },
+	{ }
+};
+
+static void __init dove_clk_init(struct device_node *np)
+{
+	struct device_node *cgnp =
+		of_find_compatible_node(NULL, NULL, "marvell,dove-gating-clock");
+	struct device_node *ddnp =
+		of_find_compatible_node(NULL, NULL, "marvell,dove-divider-clock");
+
+	mvebu_coreclk_setup(np, &dove_coreclks);
+
+	if (ddnp) {
+		dove_divider_clk_init(ddnp);
+		of_node_put(ddnp);
+	}
+
+	if (cgnp) {
+		mvebu_clk_gating_setup(cgnp, dove_gating_desc);
+		of_node_put(cgnp);
+	}
+}
+CLK_OF_DECLARE(dove_clk, "marvell,dove-core-clock", dove_clk_init);