Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 766 insertions, 0 deletions

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a23.c b/drivers/clk/sunxi-ng/ccu-sun8i-a23.c
new file mode 100644
index 000000000..e80cc3864
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-a23.c
@@ -0,0 +1,766 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016 Maxime Ripard. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+#include "ccu_sdm.h"
+
+#include "ccu-sun8i-a23-a33.h"
+
+
+static struct ccu_nkmp pll_cpux_clk = {
+	.enable = BIT(31),
+	.lock	= BIT(28),
+
+	.n	= _SUNXI_CCU_MULT(8, 5),
+	.k	= _SUNXI_CCU_MULT(4, 2),
+	.m	= _SUNXI_CCU_DIV(0, 2),
+	.p	= _SUNXI_CCU_DIV_MAX(16, 2, 4),
+
+	.common	= {
+		.reg		= 0x000,
+		.hw.init	= CLK_HW_INIT("pll-cpux", "osc24M",
+					      &ccu_nkmp_ops,
+					      0),
+	},
+};
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * With sigma-delta modulation for fractional-N on the audio PLL,
+ * we have to use specific dividers. This means the variable divider
+ * can no longer be used, as the audio codec requests the exact clock
+ * rates we support through this mechanism. So we now hard code the
+ * variable divider to 1. This means the clock rates will no longer
+ * match the clock names.
+ */
+#define SUN8I_A23_PLL_AUDIO_REG	0x008
+
+static struct ccu_sdm_setting pll_audio_sdm_table[] = {
+	{ .rate = 22579200, .pattern = 0xc0010d84, .m = 8, .n = 7 },
+	{ .rate = 24576000, .pattern = 0xc000ac02, .m = 14, .n = 14 },
+};
+
+static SUNXI_CCU_NM_WITH_SDM_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
+				       "osc24M", 0x008,
+				       8, 7,	/* N */
+				       0, 5,	/* M */
+				       pll_audio_sdm_table, BIT(24),
+				       0x284, BIT(31),
+				       BIT(31),	/* gate */
+				       BIT(28),	/* lock */
+				       CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video_clk, "pll-video",
+					"osc24M", 0x010,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
+					"osc24M", 0x018,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr_clk, "pll-ddr",
+				    "osc24M", 0x020,
+				    8, 5,		/* N */
+				    4, 2,		/* K */
+				    0, 2,		/* M */
+				    BIT(31),		/* gate */
+				    BIT(28),		/* lock */
+				    0);
+
+static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph_clk, "pll-periph",
+					   "osc24M", 0x028,
+					   8, 5,	/* N */
+					   4, 2,	/* K */
+					   BIT(31),	/* gate */
+					   BIT(28),	/* lock */
+					   2,		/* post-div */
+					   CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
+					"osc24M", 0x038,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);
+
+/*
+ * The MIPI PLL has 2 modes: "MIPI" and "HDMI".
+ *
+ * The MIPI mode is a standard NKM-style clock. The HDMI mode is an
+ * integer / fractional clock with switchable multipliers and dividers.
+ * This is not supported here. We hardcode the PLL to MIPI mode.
+ */
+#define SUN8I_A23_PLL_MIPI_REG	0x040
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_mipi_clk, "pll-mipi",
+				    "pll-video", 0x040,
+				    8, 4,		/* N */
+				    4, 2,		/* K */
+				    0, 4,		/* M */
+				    BIT(31) | BIT(23) | BIT(22), /* gate */
+				    BIT(28),		/* lock */
+				    CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_hsic_clk, "pll-hsic",
+					"osc24M", 0x044,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de",
+					"osc24M", 0x048,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);
+
+static const char * const cpux_parents[] = { "osc32k", "osc24M",
+					     "pll-cpux" , "pll-cpux" };
+static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
+		     0x050, 16, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x050, 0, 2, 0);
+
+static const char * const ahb1_parents[] = { "osc32k", "osc24M",
+					     "axi" , "pll-periph" };
+static const struct ccu_mux_var_prediv ahb1_predivs[] = {
+	{ .index = 3, .shift = 6, .width = 2 },
+};
+static struct ccu_div ahb1_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.mux		= {
+		.shift	= 12,
+		.width	= 2,
+
+		.var_predivs	= ahb1_predivs,
+		.n_var_predivs	= ARRAY_SIZE(ahb1_predivs),
+	},
+
+	.common		= {
+		.reg		= 0x054,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("ahb1",
+						      ahb1_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static struct clk_div_table apb1_div_table[] = {
+	{ .val = 0, .div = 2 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 8 },
+	{ /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
+			   0x054, 8, 2, apb1_div_table, 0);
+
+static const char * const apb2_parents[] = { "osc32k", "osc24M",
+					     "pll-periph" , "pll-periph" };
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static SUNXI_CCU_GATE(bus_mipi_dsi_clk,	"bus-mipi-dsi",	"ahb1",
+		      0x060, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_dma_clk,	"bus-dma",	"ahb1",
+		      0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_mmc0_clk,	"bus-mmc0",	"ahb1",
+		      0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk,	"bus-mmc1",	"ahb1",
+		      0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk,	"bus-mmc2",	"ahb1",
+		      0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_nand_clk,	"bus-nand",	"ahb1",
+		      0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_dram_clk,	"bus-dram",	"ahb1",
+		      0x060, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_hstimer_clk,	"bus-hstimer",	"ahb1",
+		      0x060, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_spi0_clk,	"bus-spi0",	"ahb1",
+		      0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk,	"bus-spi1",	"ahb1",
+		      0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_otg_clk,	"bus-otg",	"ahb1",
+		      0x060, BIT(24), 0);
+static SUNXI_CCU_GATE(bus_ehci_clk,	"bus-ehci",	"ahb1",
+		      0x060, BIT(26), 0);
+static SUNXI_CCU_GATE(bus_ohci_clk,	"bus-ohci",	"ahb1",
+		      0x060, BIT(29), 0);
+
+static SUNXI_CCU_GATE(bus_ve_clk,	"bus-ve",	"ahb1",
+		      0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_lcd_clk,	"bus-lcd",	"ahb1",
+		      0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_csi_clk,	"bus-csi",	"ahb1",
+		      0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_de_be_clk,	"bus-de-be",	"ahb1",
+		      0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_de_fe_clk,	"bus-de-fe",	"ahb1",
+		      0x064, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_gpu_clk,	"bus-gpu",	"ahb1",
+		      0x064, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_msgbox_clk,	"bus-msgbox",	"ahb1",
+		      0x064, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_spinlock_clk,	"bus-spinlock",	"ahb1",
+		      0x064, BIT(22), 0);
+static SUNXI_CCU_GATE(bus_drc_clk,	"bus-drc",	"ahb1",
+		      0x064, BIT(25), 0);
+
+static SUNXI_CCU_GATE(bus_codec_clk,	"bus-codec",	"apb1",
+		      0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_pio_clk,	"bus-pio",	"apb1",
+		      0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_i2s0_clk,	"bus-i2s0",	"apb1",
+		      0x068, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_i2s1_clk,	"bus-i2s1",	"apb1",
+		      0x068, BIT(13), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk,	"bus-i2c0",	"apb2",
+		      0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk,	"bus-i2c1",	"apb2",
+		      0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk,	"bus-i2c2",	"apb2",
+		      0x06c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_uart0_clk,	"bus-uart0",	"apb2",
+		      0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk,	"bus-uart1",	"apb2",
+		      0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk,	"bus-uart2",	"apb2",
+		      0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_uart3_clk,	"bus-uart3",	"apb2",
+		      0x06c, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_uart4_clk,	"bus-uart4",	"apb2",
+		      0x06c, BIT(20), 0);
+
+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0",
+		       0x088, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0",
+		       0x088, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1",
+		       0x08c, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1",
+		       0x08c, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2_sample", "mmc2",
+		       0x090, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2_output", "mmc2",
+		       0x090, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
+					    "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
+			       0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents,
+			       0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+/* TODO: the parent for most of the USB clocks is not known */
+static SUNXI_CCU_GATE(usb_phy0_clk,	"usb-phy0",	"osc24M",
+		      0x0cc, BIT(8), 0);
+static SUNXI_CCU_GATE(usb_phy1_clk,	"usb-phy1",	"osc24M",
+		      0x0cc, BIT(9), 0);
+static SUNXI_CCU_GATE(usb_hsic_clk,	"usb-hsic",	"pll-hsic",
+		      0x0cc, BIT(10), 0);
+static SUNXI_CCU_GATE(usb_hsic_12M_clk,	"usb-hsic-12M",	"osc24M",
+		      0x0cc, BIT(11), 0);
+static SUNXI_CCU_GATE(usb_ohci_clk,	"usb-ohci",	"osc24M",
+		      0x0cc, BIT(16), 0);
+
+static SUNXI_CCU_GATE(dram_ve_clk,	"dram-ve",	"pll-ddr",
+		      0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi_clk,	"dram-csi",	"pll-ddr",
+		      0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_drc_clk,	"dram-drc",	"pll-ddr",
+		      0x100, BIT(16), 0);
+static SUNXI_CCU_GATE(dram_de_fe_clk,	"dram-de-fe",	"pll-ddr",
+		      0x100, BIT(24), 0);
+static SUNXI_CCU_GATE(dram_de_be_clk,	"dram-de-be",	"pll-ddr",
+		      0x100, BIT(26), 0);
+
+static const char * const de_parents[] = { "pll-video", "pll-periph-2x",
+					   "pll-gpu", "pll-de" };
+static const u8 de_table[] = { 0, 2, 3, 5 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(de_be_clk, "de-be",
+				       de_parents, de_table,
+				       0x104, 0, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(de_fe_clk, "de-fe",
+				       de_parents, de_table,
+				       0x10c, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const lcd_ch0_parents[] = { "pll-video", "pll-video-2x",
+						"pll-mipi" };
+static const u8 lcd_ch0_table[] = { 0, 2, 4 };
+static SUNXI_CCU_MUX_TABLE_WITH_GATE(lcd_ch0_clk, "lcd-ch0",
+				     lcd_ch0_parents, lcd_ch0_table,
+				     0x118, 24, 3, BIT(31),
+				     CLK_SET_RATE_PARENT);
+
+static const char * const lcd_ch1_parents[] = { "pll-video", "pll-video-2x" };
+static const u8 lcd_ch1_table[] = { 0, 2 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(lcd_ch1_clk, "lcd-ch1",
+				       lcd_ch1_parents, lcd_ch1_table,
+				       0x12c, 0, 4, 24, 2, BIT(31), 0);
+
+static const char * const csi_sclk_parents[] = { "pll-video", "pll-de",
+						 "pll-mipi", "pll-ve" };
+static const u8 csi_sclk_table[] = { 0, 3, 4, 5 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_sclk_clk, "csi-sclk",
+				       csi_sclk_parents, csi_sclk_table,
+				       0x134, 16, 4, 24, 3, BIT(31), 0);
+
+static const char * const csi_mclk_parents[] = { "pll-video", "pll-de",
+						 "osc24M" };
+static const u8 csi_mclk_table[] = { 0, 3, 5 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_mclk_clk, "csi-mclk",
+				       csi_mclk_parents, csi_mclk_table,
+				       0x134, 0, 5, 8, 3, BIT(15), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
+			     0x13c, 16, 3, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(ac_dig_clk,	"ac-dig",	"pll-audio",
+		      0x140, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(avs_clk,		"avs",		"osc24M",
+		      0x144, BIT(31), 0);
+
+static const char * const mbus_parents[] = { "osc24M", "pll-periph-2x",
+					     "pll-ddr" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
+				 0x15c, 0, 3, 24, 2, BIT(31), CLK_IS_CRITICAL);
+
+static const char * const dsi_sclk_parents[] = { "pll-video", "pll-video-2x" };
+static const u8 dsi_sclk_table[] = { 0, 2 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(dsi_sclk_clk, "dsi-sclk",
+				       dsi_sclk_parents, dsi_sclk_table,
+				       0x168, 16, 4, 24, 2, BIT(31), 0);
+
+static const char * const dsi_dphy_parents[] = { "pll-video", "pll-periph" };
+static const u8 dsi_dphy_table[] = { 0, 2 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(dsi_dphy_clk, "dsi-dphy",
+				       dsi_dphy_parents, dsi_dphy_table,
+				       0x168, 0, 4, 8, 2, BIT(15), 0);
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(drc_clk, "drc",
+				       de_parents, de_table,
+				       0x180, 0, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu",
+			     0x1a0, 0, 3, BIT(31), 0);
+
+static const char * const ats_parents[] = { "osc24M", "pll-periph" };
+static SUNXI_CCU_M_WITH_MUX_GATE(ats_clk, "ats", ats_parents,
+				 0x1b0, 0, 3, 24, 2, BIT(31), 0);
+
+static struct ccu_common *sun8i_a23_ccu_clks[] = {
+	&pll_cpux_clk.common,
+	&pll_audio_base_clk.common,
+	&pll_video_clk.common,
+	&pll_ve_clk.common,
+	&pll_ddr_clk.common,
+	&pll_periph_clk.common,
+	&pll_gpu_clk.common,
+	&pll_mipi_clk.common,
+	&pll_hsic_clk.common,
+	&pll_de_clk.common,
+	&cpux_clk.common,
+	&axi_clk.common,
+	&ahb1_clk.common,
+	&apb1_clk.common,
+	&apb2_clk.common,
+	&bus_mipi_dsi_clk.common,
+	&bus_dma_clk.common,
+	&bus_mmc0_clk.common,
+	&bus_mmc1_clk.common,
+	&bus_mmc2_clk.common,
+	&bus_nand_clk.common,
+	&bus_dram_clk.common,
+	&bus_hstimer_clk.common,
+	&bus_spi0_clk.common,
+	&bus_spi1_clk.common,
+	&bus_otg_clk.common,
+	&bus_ehci_clk.common,
+	&bus_ohci_clk.common,
+	&bus_ve_clk.common,
+	&bus_lcd_clk.common,
+	&bus_csi_clk.common,
+	&bus_de_fe_clk.common,
+	&bus_de_be_clk.common,
+	&bus_gpu_clk.common,
+	&bus_msgbox_clk.common,
+	&bus_spinlock_clk.common,
+	&bus_drc_clk.common,
+	&bus_codec_clk.common,
+	&bus_pio_clk.common,
+	&bus_i2s0_clk.common,
+	&bus_i2s1_clk.common,
+	&bus_i2c0_clk.common,
+	&bus_i2c1_clk.common,
+	&bus_i2c2_clk.common,
+	&bus_uart0_clk.common,
+	&bus_uart1_clk.common,
+	&bus_uart2_clk.common,
+	&bus_uart3_clk.common,
+	&bus_uart4_clk.common,
+	&nand_clk.common,
+	&mmc0_clk.common,
+	&mmc0_sample_clk.common,
+	&mmc0_output_clk.common,
+	&mmc1_clk.common,
+	&mmc1_sample_clk.common,
+	&mmc1_output_clk.common,
+	&mmc2_clk.common,
+	&mmc2_sample_clk.common,
+	&mmc2_output_clk.common,
+	&spi0_clk.common,
+	&spi1_clk.common,
+	&i2s0_clk.common,
+	&i2s1_clk.common,
+	&usb_phy0_clk.common,
+	&usb_phy1_clk.common,
+	&usb_hsic_clk.common,
+	&usb_hsic_12M_clk.common,
+	&usb_ohci_clk.common,
+	&dram_ve_clk.common,
+	&dram_csi_clk.common,
+	&dram_drc_clk.common,
+	&dram_de_fe_clk.common,
+	&dram_de_be_clk.common,
+	&de_be_clk.common,
+	&de_fe_clk.common,
+	&lcd_ch0_clk.common,
+	&lcd_ch1_clk.common,
+	&csi_sclk_clk.common,
+	&csi_mclk_clk.common,
+	&ve_clk.common,
+	&ac_dig_clk.common,
+	&avs_clk.common,
+	&mbus_clk.common,
+	&dsi_sclk_clk.common,
+	&dsi_dphy_clk.common,
+	&drc_clk.common,
+	&gpu_clk.common,
+	&ats_clk.common,
+};
+
+static const struct clk_hw *clk_parent_pll_audio[] = {
+	&pll_audio_base_clk.common.hw
+};
+
+/* We hardcode the divider to 1 for now */
+static CLK_FIXED_FACTOR_HWS(pll_audio_clk, "pll-audio",
+			    clk_parent_pll_audio,
+			    1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HWS(pll_audio_2x_clk, "pll-audio-2x",
+			    clk_parent_pll_audio,
+			    2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HWS(pll_audio_4x_clk, "pll-audio-4x",
+			    clk_parent_pll_audio,
+			    1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HWS(pll_audio_8x_clk, "pll-audio-8x",
+			    clk_parent_pll_audio,
+			    1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HW(pll_periph_2x_clk, "pll-periph-2x",
+			   &pll_periph_clk.common.hw,
+			   1, 2, 0);
+static CLK_FIXED_FACTOR_HW(pll_video_2x_clk, "pll-video-2x",
+			   &pll_video_clk.common.hw,
+			   1, 2, 0);
+
+static struct clk_hw_onecell_data sun8i_a23_hw_clks = {
+	.hws	= {
+		[CLK_PLL_CPUX]		= &pll_cpux_clk.common.hw,
+		[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.hw,
+		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
+		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
+		[CLK_PLL_AUDIO_8X]	= &pll_audio_8x_clk.hw,
+		[CLK_PLL_VIDEO]		= &pll_video_clk.common.hw,
+		[CLK_PLL_VIDEO_2X]	= &pll_video_2x_clk.hw,
+		[CLK_PLL_VE]		= &pll_ve_clk.common.hw,
+		[CLK_PLL_DDR0]		= &pll_ddr_clk.common.hw,
+		[CLK_PLL_PERIPH]	= &pll_periph_clk.common.hw,
+		[CLK_PLL_PERIPH_2X]	= &pll_periph_2x_clk.hw,
+		[CLK_PLL_GPU]		= &pll_gpu_clk.common.hw,
+		[CLK_PLL_MIPI]		= &pll_mipi_clk.common.hw,
+		[CLK_PLL_HSIC]		= &pll_hsic_clk.common.hw,
+		[CLK_PLL_DE]		= &pll_de_clk.common.hw,
+		[CLK_CPUX]		= &cpux_clk.common.hw,
+		[CLK_AXI]		= &axi_clk.common.hw,
+		[CLK_AHB1]		= &ahb1_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_APB2]		= &apb2_clk.common.hw,
+		[CLK_BUS_MIPI_DSI]	= &bus_mipi_dsi_clk.common.hw,
+		[CLK_BUS_DMA]		= &bus_dma_clk.common.hw,
+		[CLK_BUS_MMC0]		= &bus_mmc0_clk.common.hw,
+		[CLK_BUS_MMC1]		= &bus_mmc1_clk.common.hw,
+		[CLK_BUS_MMC2]		= &bus_mmc2_clk.common.hw,
+		[CLK_BUS_NAND]		= &bus_nand_clk.common.hw,
+		[CLK_BUS_DRAM]		= &bus_dram_clk.common.hw,
+		[CLK_BUS_HSTIMER]	= &bus_hstimer_clk.common.hw,
+		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
+		[CLK_BUS_SPI1]		= &bus_spi1_clk.common.hw,
+		[CLK_BUS_OTG]		= &bus_otg_clk.common.hw,
+		[CLK_BUS_EHCI]		= &bus_ehci_clk.common.hw,
+		[CLK_BUS_OHCI]		= &bus_ohci_clk.common.hw,
+		[CLK_BUS_VE]		= &bus_ve_clk.common.hw,
+		[CLK_BUS_LCD]		= &bus_lcd_clk.common.hw,
+		[CLK_BUS_CSI]		= &bus_csi_clk.common.hw,
+		[CLK_BUS_DE_BE]		= &bus_de_be_clk.common.hw,
+		[CLK_BUS_DE_FE]		= &bus_de_fe_clk.common.hw,
+		[CLK_BUS_GPU]		= &bus_gpu_clk.common.hw,
+		[CLK_BUS_MSGBOX]	= &bus_msgbox_clk.common.hw,
+		[CLK_BUS_SPINLOCK]	= &bus_spinlock_clk.common.hw,
+		[CLK_BUS_DRC]		= &bus_drc_clk.common.hw,
+		[CLK_BUS_CODEC]		= &bus_codec_clk.common.hw,
+		[CLK_BUS_PIO]		= &bus_pio_clk.common.hw,
+		[CLK_BUS_I2S0]		= &bus_i2s0_clk.common.hw,
+		[CLK_BUS_I2S1]		= &bus_i2s1_clk.common.hw,
+		[CLK_BUS_I2C0]		= &bus_i2c0_clk.common.hw,
+		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
+		[CLK_BUS_I2C2]		= &bus_i2c2_clk.common.hw,
+		[CLK_BUS_UART0]		= &bus_uart0_clk.common.hw,
+		[CLK_BUS_UART1]		= &bus_uart1_clk.common.hw,
+		[CLK_BUS_UART2]		= &bus_uart2_clk.common.hw,
+		[CLK_BUS_UART3]		= &bus_uart3_clk.common.hw,
+		[CLK_BUS_UART4]		= &bus_uart4_clk.common.hw,
+		[CLK_NAND]		= &nand_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC0_SAMPLE]	= &mmc0_sample_clk.common.hw,
+		[CLK_MMC0_OUTPUT]	= &mmc0_output_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC1_SAMPLE]	= &mmc1_sample_clk.common.hw,
+		[CLK_MMC1_OUTPUT]	= &mmc1_output_clk.common.hw,
+		[CLK_MMC2]		= &mmc2_clk.common.hw,
+		[CLK_MMC2_SAMPLE]	= &mmc2_sample_clk.common.hw,
+		[CLK_MMC2_OUTPUT]	= &mmc2_output_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_SPI1]		= &spi1_clk.common.hw,
+		[CLK_I2S0]		= &i2s0_clk.common.hw,
+		[CLK_I2S1]		= &i2s1_clk.common.hw,
+		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
+		[CLK_USB_PHY1]		= &usb_phy1_clk.common.hw,
+		[CLK_USB_HSIC]		= &usb_hsic_clk.common.hw,
+		[CLK_USB_HSIC_12M]	= &usb_hsic_12M_clk.common.hw,
+		[CLK_USB_OHCI]		= &usb_ohci_clk.common.hw,
+		[CLK_DRAM_VE]		= &dram_ve_clk.common.hw,
+		[CLK_DRAM_CSI]		= &dram_csi_clk.common.hw,
+		[CLK_DRAM_DRC]		= &dram_drc_clk.common.hw,
+		[CLK_DRAM_DE_FE]	= &dram_de_fe_clk.common.hw,
+		[CLK_DRAM_DE_BE]	= &dram_de_be_clk.common.hw,
+		[CLK_DE_BE]		= &de_be_clk.common.hw,
+		[CLK_DE_FE]		= &de_fe_clk.common.hw,
+		[CLK_LCD_CH0]		= &lcd_ch0_clk.common.hw,
+		[CLK_LCD_CH1]		= &lcd_ch1_clk.common.hw,
+		[CLK_CSI_SCLK]		= &csi_sclk_clk.common.hw,
+		[CLK_CSI_MCLK]		= &csi_mclk_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_AC_DIG]		= &ac_dig_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_MBUS]		= &mbus_clk.common.hw,
+		[CLK_DSI_SCLK]		= &dsi_sclk_clk.common.hw,
+		[CLK_DSI_DPHY]		= &dsi_dphy_clk.common.hw,
+		[CLK_DRC]		= &drc_clk.common.hw,
+		[CLK_GPU]		= &gpu_clk.common.hw,
+		[CLK_ATS]		= &ats_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun8i_a23_ccu_resets[] = {
+	[RST_USB_PHY0]		=  { 0x0cc, BIT(0) },
+	[RST_USB_PHY1]		=  { 0x0cc, BIT(1) },
+	[RST_USB_HSIC]		=  { 0x0cc, BIT(2) },
+
+	[RST_MBUS]		=  { 0x0fc, BIT(31) },
+
+	[RST_BUS_MIPI_DSI]	=  { 0x2c0, BIT(1) },
+	[RST_BUS_DMA]		=  { 0x2c0, BIT(6) },
+	[RST_BUS_MMC0]		=  { 0x2c0, BIT(8) },
+	[RST_BUS_MMC1]		=  { 0x2c0, BIT(9) },
+	[RST_BUS_MMC2]		=  { 0x2c0, BIT(10) },
+	[RST_BUS_NAND]		=  { 0x2c0, BIT(13) },
+	[RST_BUS_DRAM]		=  { 0x2c0, BIT(14) },
+	[RST_BUS_HSTIMER]	=  { 0x2c0, BIT(19) },
+	[RST_BUS_SPI0]		=  { 0x2c0, BIT(20) },
+	[RST_BUS_SPI1]		=  { 0x2c0, BIT(21) },
+	[RST_BUS_OTG]		=  { 0x2c0, BIT(24) },
+	[RST_BUS_EHCI]		=  { 0x2c0, BIT(26) },
+	[RST_BUS_OHCI]		=  { 0x2c0, BIT(29) },
+
+	[RST_BUS_VE]		=  { 0x2c4, BIT(0) },
+	[RST_BUS_LCD]		=  { 0x2c4, BIT(4) },
+	[RST_BUS_CSI]		=  { 0x2c4, BIT(8) },
+	[RST_BUS_DE_BE]		=  { 0x2c4, BIT(12) },
+	[RST_BUS_DE_FE]		=  { 0x2c4, BIT(14) },
+	[RST_BUS_GPU]		=  { 0x2c4, BIT(20) },
+	[RST_BUS_MSGBOX]	=  { 0x2c4, BIT(21) },
+	[RST_BUS_SPINLOCK]	=  { 0x2c4, BIT(22) },
+	[RST_BUS_DRC]		=  { 0x2c4, BIT(25) },
+
+	[RST_BUS_LVDS]		=  { 0x2c8, BIT(0) },
+
+	[RST_BUS_CODEC]		=  { 0x2d0, BIT(0) },
+	[RST_BUS_I2S0]		=  { 0x2d0, BIT(12) },
+	[RST_BUS_I2S1]		=  { 0x2d0, BIT(13) },
+
+	[RST_BUS_I2C0]		=  { 0x2d8, BIT(0) },
+	[RST_BUS_I2C1]		=  { 0x2d8, BIT(1) },
+	[RST_BUS_I2C2]		=  { 0x2d8, BIT(2) },
+	[RST_BUS_UART0]		=  { 0x2d8, BIT(16) },
+	[RST_BUS_UART1]		=  { 0x2d8, BIT(17) },
+	[RST_BUS_UART2]		=  { 0x2d8, BIT(18) },
+	[RST_BUS_UART3]		=  { 0x2d8, BIT(19) },
+	[RST_BUS_UART4]		=  { 0x2d8, BIT(20) },
+};
+
+static const struct sunxi_ccu_desc sun8i_a23_ccu_desc = {
+	.ccu_clks	= sun8i_a23_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun8i_a23_ccu_clks),
+
+	.hw_clks	= &sun8i_a23_hw_clks,
+
+	.resets		= sun8i_a23_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun8i_a23_ccu_resets),
+};
+
+static int sun8i_a23_ccu_probe(struct platform_device *pdev)
+{
+	void __iomem *reg;
+	u32 val;
+
+	reg = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	/* Force the PLL-Audio-1x divider to 1 */
+	val = readl(reg + SUN8I_A23_PLL_AUDIO_REG);
+	val &= ~GENMASK(19, 16);
+	writel(val | (0 << 16), reg + SUN8I_A23_PLL_AUDIO_REG);
+
+	/* Force PLL-MIPI to MIPI mode */
+	val = readl(reg + SUN8I_A23_PLL_MIPI_REG);
+	val &= ~BIT(16);
+	writel(val, reg + SUN8I_A23_PLL_MIPI_REG);
+
+	return devm_sunxi_ccu_probe(&pdev->dev, reg, &sun8i_a23_ccu_desc);
+}
+
+static const struct of_device_id sun8i_a23_ccu_ids[] = {
+	{ .compatible = "allwinner,sun8i-a23-ccu" },
+	{ }
+};
+
+static struct platform_driver sun8i_a23_ccu_driver = {
+	.probe	= sun8i_a23_ccu_probe,
+	.driver	= {
+		.name			= "sun8i-a23-ccu",
+		.suppress_bind_attrs	= true,
+		.of_match_table		= sun8i_a23_ccu_ids,
+	},
+};
+module_platform_driver(sun8i_a23_ccu_driver);
+
+MODULE_IMPORT_NS(SUNXI_CCU);
+MODULE_LICENSE("GPL");