Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 616 insertions, 0 deletions

diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c
new file mode 100644
index 000000000..7bdeaff2b
--- /dev/null
+++ b/drivers/clk/zynq/clkc.c
@@ -0,0 +1,616 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Zynq clock controller
+ *
+ *  Copyright (C) 2012 - 2013 Xilinx
+ *
+ *  Sören Brinkmann <soren.brinkmann@xilinx.com>
+ */
+
+#include <linux/clk/zynq.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/io.h>
+
+static void __iomem *zynq_clkc_base;
+
+#define SLCR_ARMPLL_CTRL		(zynq_clkc_base + 0x00)
+#define SLCR_DDRPLL_CTRL		(zynq_clkc_base + 0x04)
+#define SLCR_IOPLL_CTRL			(zynq_clkc_base + 0x08)
+#define SLCR_PLL_STATUS			(zynq_clkc_base + 0x0c)
+#define SLCR_ARM_CLK_CTRL		(zynq_clkc_base + 0x20)
+#define SLCR_DDR_CLK_CTRL		(zynq_clkc_base + 0x24)
+#define SLCR_DCI_CLK_CTRL		(zynq_clkc_base + 0x28)
+#define SLCR_APER_CLK_CTRL		(zynq_clkc_base + 0x2c)
+#define SLCR_GEM0_CLK_CTRL		(zynq_clkc_base + 0x40)
+#define SLCR_GEM1_CLK_CTRL		(zynq_clkc_base + 0x44)
+#define SLCR_SMC_CLK_CTRL		(zynq_clkc_base + 0x48)
+#define SLCR_LQSPI_CLK_CTRL		(zynq_clkc_base + 0x4c)
+#define SLCR_SDIO_CLK_CTRL		(zynq_clkc_base + 0x50)
+#define SLCR_UART_CLK_CTRL		(zynq_clkc_base + 0x54)
+#define SLCR_SPI_CLK_CTRL		(zynq_clkc_base + 0x58)
+#define SLCR_CAN_CLK_CTRL		(zynq_clkc_base + 0x5c)
+#define SLCR_CAN_MIOCLK_CTRL		(zynq_clkc_base + 0x60)
+#define SLCR_DBG_CLK_CTRL		(zynq_clkc_base + 0x64)
+#define SLCR_PCAP_CLK_CTRL		(zynq_clkc_base + 0x68)
+#define SLCR_FPGA0_CLK_CTRL		(zynq_clkc_base + 0x70)
+#define SLCR_621_TRUE			(zynq_clkc_base + 0xc4)
+#define SLCR_SWDT_CLK_SEL		(zynq_clkc_base + 0x204)
+
+#define NUM_MIO_PINS	54
+
+#define DBG_CLK_CTRL_CLKACT_TRC		BIT(0)
+#define DBG_CLK_CTRL_CPU_1XCLKACT	BIT(1)
+
+enum zynq_clk {
+	armpll, ddrpll, iopll,
+	cpu_6or4x, cpu_3or2x, cpu_2x, cpu_1x,
+	ddr2x, ddr3x, dci,
+	lqspi, smc, pcap, gem0, gem1, fclk0, fclk1, fclk2, fclk3, can0, can1,
+	sdio0, sdio1, uart0, uart1, spi0, spi1, dma,
+	usb0_aper, usb1_aper, gem0_aper, gem1_aper,
+	sdio0_aper, sdio1_aper, spi0_aper, spi1_aper, can0_aper, can1_aper,
+	i2c0_aper, i2c1_aper, uart0_aper, uart1_aper, gpio_aper, lqspi_aper,
+	smc_aper, swdt, dbg_trc, dbg_apb, clk_max};
+
+static struct clk *ps_clk;
+static struct clk *clks[clk_max];
+static struct clk_onecell_data clk_data;
+
+static DEFINE_SPINLOCK(armpll_lock);
+static DEFINE_SPINLOCK(ddrpll_lock);
+static DEFINE_SPINLOCK(iopll_lock);
+static DEFINE_SPINLOCK(armclk_lock);
+static DEFINE_SPINLOCK(swdtclk_lock);
+static DEFINE_SPINLOCK(ddrclk_lock);
+static DEFINE_SPINLOCK(dciclk_lock);
+static DEFINE_SPINLOCK(gem0clk_lock);
+static DEFINE_SPINLOCK(gem1clk_lock);
+static DEFINE_SPINLOCK(canclk_lock);
+static DEFINE_SPINLOCK(canmioclk_lock);
+static DEFINE_SPINLOCK(dbgclk_lock);
+static DEFINE_SPINLOCK(aperclk_lock);
+
+static const char *const armpll_parents[] __initconst = {"armpll_int",
+	"ps_clk"};
+static const char *const ddrpll_parents[] __initconst = {"ddrpll_int",
+	"ps_clk"};
+static const char *const iopll_parents[] __initconst = {"iopll_int",
+	"ps_clk"};
+static const char *gem0_mux_parents[] __initdata = {"gem0_div1", "dummy_name"};
+static const char *gem1_mux_parents[] __initdata = {"gem1_div1", "dummy_name"};
+static const char *const can0_mio_mux2_parents[] __initconst = {"can0_gate",
+	"can0_mio_mux"};
+static const char *const can1_mio_mux2_parents[] __initconst = {"can1_gate",
+	"can1_mio_mux"};
+static const char *dbg_emio_mux_parents[] __initdata = {"dbg_div",
+	"dummy_name"};
+
+static const char *const dbgtrc_emio_input_names[] __initconst = {
+	"trace_emio_clk"};
+static const char *const gem0_emio_input_names[] __initconst = {
+	"gem0_emio_clk"};
+static const char *const gem1_emio_input_names[] __initconst = {
+	"gem1_emio_clk"};
+static const char *const swdt_ext_clk_input_names[] __initconst = {
+	"swdt_ext_clk"};
+
+static void __init zynq_clk_register_fclk(enum zynq_clk fclk,
+		const char *clk_name, void __iomem *fclk_ctrl_reg,
+		const char **parents, int enable)
+{
+	u32 enable_reg;
+	char *mux_name;
+	char *div0_name;
+	char *div1_name;
+	spinlock_t *fclk_lock;
+	spinlock_t *fclk_gate_lock;
+	void __iomem *fclk_gate_reg = fclk_ctrl_reg + 8;
+
+	fclk_lock = kmalloc(sizeof(*fclk_lock), GFP_KERNEL);
+	if (!fclk_lock)
+		goto err;
+	fclk_gate_lock = kmalloc(sizeof(*fclk_gate_lock), GFP_KERNEL);
+	if (!fclk_gate_lock)
+		goto err_fclk_gate_lock;
+	spin_lock_init(fclk_lock);
+	spin_lock_init(fclk_gate_lock);
+
+	mux_name = kasprintf(GFP_KERNEL, "%s_mux", clk_name);
+	if (!mux_name)
+		goto err_mux_name;
+	div0_name = kasprintf(GFP_KERNEL, "%s_div0", clk_name);
+	if (!div0_name)
+		goto err_div0_name;
+	div1_name = kasprintf(GFP_KERNEL, "%s_div1", clk_name);
+	if (!div1_name)
+		goto err_div1_name;
+
+	clk_register_mux(NULL, mux_name, parents, 4,
+			CLK_SET_RATE_NO_REPARENT, fclk_ctrl_reg, 4, 2, 0,
+			fclk_lock);
+
+	clk_register_divider(NULL, div0_name, mux_name,
+			0, fclk_ctrl_reg, 8, 6, CLK_DIVIDER_ONE_BASED |
+			CLK_DIVIDER_ALLOW_ZERO, fclk_lock);
+
+	clk_register_divider(NULL, div1_name, div0_name,
+			CLK_SET_RATE_PARENT, fclk_ctrl_reg, 20, 6,
+			CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
+			fclk_lock);
+
+	clks[fclk] = clk_register_gate(NULL, clk_name,
+			div1_name, CLK_SET_RATE_PARENT, fclk_gate_reg,
+			0, CLK_GATE_SET_TO_DISABLE, fclk_gate_lock);
+	enable_reg = readl(fclk_gate_reg) & 1;
+	if (enable && !enable_reg) {
+		if (clk_prepare_enable(clks[fclk]))
+			pr_warn("%s: FCLK%u enable failed\n", __func__,
+					fclk - fclk0);
+	}
+	kfree(mux_name);
+	kfree(div0_name);
+	kfree(div1_name);
+
+	return;
+
+err_div1_name:
+	kfree(div0_name);
+err_div0_name:
+	kfree(mux_name);
+err_mux_name:
+	kfree(fclk_gate_lock);
+err_fclk_gate_lock:
+	kfree(fclk_lock);
+err:
+	clks[fclk] = ERR_PTR(-ENOMEM);
+}
+
+static void __init zynq_clk_register_periph_clk(enum zynq_clk clk0,
+		enum zynq_clk clk1, const char *clk_name0,
+		const char *clk_name1, void __iomem *clk_ctrl,
+		const char **parents, unsigned int two_gates)
+{
+	char *mux_name;
+	char *div_name;
+	spinlock_t *lock;
+
+	lock = kmalloc(sizeof(*lock), GFP_KERNEL);
+	if (!lock)
+		goto err;
+	spin_lock_init(lock);
+
+	mux_name = kasprintf(GFP_KERNEL, "%s_mux", clk_name0);
+	div_name = kasprintf(GFP_KERNEL, "%s_div", clk_name0);
+
+	clk_register_mux(NULL, mux_name, parents, 4,
+			CLK_SET_RATE_NO_REPARENT, clk_ctrl, 4, 2, 0, lock);
+
+	clk_register_divider(NULL, div_name, mux_name, 0, clk_ctrl, 8, 6,
+			CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, lock);
+
+	clks[clk0] = clk_register_gate(NULL, clk_name0, div_name,
+			CLK_SET_RATE_PARENT, clk_ctrl, 0, 0, lock);
+	if (two_gates)
+		clks[clk1] = clk_register_gate(NULL, clk_name1, div_name,
+				CLK_SET_RATE_PARENT, clk_ctrl, 1, 0, lock);
+
+	kfree(mux_name);
+	kfree(div_name);
+
+	return;
+
+err:
+	clks[clk0] = ERR_PTR(-ENOMEM);
+	if (two_gates)
+		clks[clk1] = ERR_PTR(-ENOMEM);
+}
+
+static void __init zynq_clk_setup(struct device_node *np)
+{
+	int i;
+	u32 tmp;
+	int ret;
+	char *clk_name;
+	unsigned int fclk_enable = 0;
+	const char *clk_output_name[clk_max];
+	const char *cpu_parents[4];
+	const char *periph_parents[4];
+	const char *swdt_ext_clk_mux_parents[2];
+	const char *can_mio_mux_parents[NUM_MIO_PINS];
+	const char *dummy_nm = "dummy_name";
+
+	pr_info("Zynq clock init\n");
+
+	/* get clock output names from DT */
+	for (i = 0; i < clk_max; i++) {
+		if (of_property_read_string_index(np, "clock-output-names",
+				  i, &clk_output_name[i])) {
+			pr_err("%s: clock output name not in DT\n", __func__);
+			BUG();
+		}
+	}
+	cpu_parents[0] = clk_output_name[armpll];
+	cpu_parents[1] = clk_output_name[armpll];
+	cpu_parents[2] = clk_output_name[ddrpll];
+	cpu_parents[3] = clk_output_name[iopll];
+	periph_parents[0] = clk_output_name[iopll];
+	periph_parents[1] = clk_output_name[iopll];
+	periph_parents[2] = clk_output_name[armpll];
+	periph_parents[3] = clk_output_name[ddrpll];
+
+	of_property_read_u32(np, "fclk-enable", &fclk_enable);
+
+	/* ps_clk */
+	ret = of_property_read_u32(np, "ps-clk-frequency", &tmp);
+	if (ret) {
+		pr_warn("ps_clk frequency not specified, using 33 MHz.\n");
+		tmp = 33333333;
+	}
+	ps_clk = clk_register_fixed_rate(NULL, "ps_clk", NULL, 0, tmp);
+
+	/* PLLs */
+	clk_register_zynq_pll("armpll_int", "ps_clk", SLCR_ARMPLL_CTRL,
+			SLCR_PLL_STATUS, 0, &armpll_lock);
+	clks[armpll] = clk_register_mux(NULL, clk_output_name[armpll],
+			armpll_parents, 2, CLK_SET_RATE_NO_REPARENT,
+			SLCR_ARMPLL_CTRL, 4, 1, 0, &armpll_lock);
+
+	clk_register_zynq_pll("ddrpll_int", "ps_clk", SLCR_DDRPLL_CTRL,
+			SLCR_PLL_STATUS, 1, &ddrpll_lock);
+	clks[ddrpll] = clk_register_mux(NULL, clk_output_name[ddrpll],
+			ddrpll_parents, 2, CLK_SET_RATE_NO_REPARENT,
+			SLCR_DDRPLL_CTRL, 4, 1, 0, &ddrpll_lock);
+
+	clk_register_zynq_pll("iopll_int", "ps_clk", SLCR_IOPLL_CTRL,
+			SLCR_PLL_STATUS, 2, &iopll_lock);
+	clks[iopll] = clk_register_mux(NULL, clk_output_name[iopll],
+			iopll_parents, 2, CLK_SET_RATE_NO_REPARENT,
+			SLCR_IOPLL_CTRL, 4, 1, 0, &iopll_lock);
+
+	/* CPU clocks */
+	tmp = readl(SLCR_621_TRUE) & 1;
+	clk_register_mux(NULL, "cpu_mux", cpu_parents, 4,
+			CLK_SET_RATE_NO_REPARENT, SLCR_ARM_CLK_CTRL, 4, 2, 0,
+			&armclk_lock);
+	clk_register_divider(NULL, "cpu_div", "cpu_mux", 0,
+			SLCR_ARM_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED |
+			CLK_DIVIDER_ALLOW_ZERO, &armclk_lock);
+
+	clks[cpu_6or4x] = clk_register_gate(NULL, clk_output_name[cpu_6or4x],
+			"cpu_div", CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+			SLCR_ARM_CLK_CTRL, 24, 0, &armclk_lock);
+
+	clk_register_fixed_factor(NULL, "cpu_3or2x_div", "cpu_div", 0,
+			1, 2);
+	clks[cpu_3or2x] = clk_register_gate(NULL, clk_output_name[cpu_3or2x],
+			"cpu_3or2x_div", CLK_IGNORE_UNUSED,
+			SLCR_ARM_CLK_CTRL, 25, 0, &armclk_lock);
+
+	clk_register_fixed_factor(NULL, "cpu_2x_div", "cpu_div", 0, 1,
+			2 + tmp);
+	clks[cpu_2x] = clk_register_gate(NULL, clk_output_name[cpu_2x],
+			"cpu_2x_div", CLK_IGNORE_UNUSED, SLCR_ARM_CLK_CTRL,
+			26, 0, &armclk_lock);
+	clk_prepare_enable(clks[cpu_2x]);
+
+	clk_register_fixed_factor(NULL, "cpu_1x_div", "cpu_div", 0, 1,
+			4 + 2 * tmp);
+	clks[cpu_1x] = clk_register_gate(NULL, clk_output_name[cpu_1x],
+			"cpu_1x_div", CLK_IGNORE_UNUSED, SLCR_ARM_CLK_CTRL, 27,
+			0, &armclk_lock);
+
+	/* Timers */
+	swdt_ext_clk_mux_parents[0] = clk_output_name[cpu_1x];
+	for (i = 0; i < ARRAY_SIZE(swdt_ext_clk_input_names); i++) {
+		int idx = of_property_match_string(np, "clock-names",
+				swdt_ext_clk_input_names[i]);
+		if (idx >= 0)
+			swdt_ext_clk_mux_parents[i + 1] =
+				of_clk_get_parent_name(np, idx);
+		else
+			swdt_ext_clk_mux_parents[i + 1] = dummy_nm;
+	}
+	clks[swdt] = clk_register_mux(NULL, clk_output_name[swdt],
+			swdt_ext_clk_mux_parents, 2, CLK_SET_RATE_PARENT |
+			CLK_SET_RATE_NO_REPARENT, SLCR_SWDT_CLK_SEL, 0, 1, 0,
+			&swdtclk_lock);
+
+	/* DDR clocks */
+	clk_register_divider(NULL, "ddr2x_div", "ddrpll", 0,
+			SLCR_DDR_CLK_CTRL, 26, 6, CLK_DIVIDER_ONE_BASED |
+			CLK_DIVIDER_ALLOW_ZERO, &ddrclk_lock);
+	clks[ddr2x] = clk_register_gate(NULL, clk_output_name[ddr2x],
+			"ddr2x_div", 0, SLCR_DDR_CLK_CTRL, 1, 0, &ddrclk_lock);
+	clk_prepare_enable(clks[ddr2x]);
+	clk_register_divider(NULL, "ddr3x_div", "ddrpll", 0,
+			SLCR_DDR_CLK_CTRL, 20, 6, CLK_DIVIDER_ONE_BASED |
+			CLK_DIVIDER_ALLOW_ZERO, &ddrclk_lock);
+	clks[ddr3x] = clk_register_gate(NULL, clk_output_name[ddr3x],
+			"ddr3x_div", 0, SLCR_DDR_CLK_CTRL, 0, 0, &ddrclk_lock);
+	clk_prepare_enable(clks[ddr3x]);
+
+	clk_register_divider(NULL, "dci_div0", "ddrpll", 0,
+			SLCR_DCI_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED |
+			CLK_DIVIDER_ALLOW_ZERO, &dciclk_lock);
+	clk_register_divider(NULL, "dci_div1", "dci_div0",
+			CLK_SET_RATE_PARENT, SLCR_DCI_CLK_CTRL, 20, 6,
+			CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
+			&dciclk_lock);
+	clks[dci] = clk_register_gate(NULL, clk_output_name[dci], "dci_div1",
+			CLK_SET_RATE_PARENT, SLCR_DCI_CLK_CTRL, 0, 0,
+			&dciclk_lock);
+	clk_prepare_enable(clks[dci]);
+
+	/* Peripheral clocks */
+	for (i = fclk0; i <= fclk3; i++) {
+		int enable = !!(fclk_enable & BIT(i - fclk0));
+
+		zynq_clk_register_fclk(i, clk_output_name[i],
+				SLCR_FPGA0_CLK_CTRL + 0x10 * (i - fclk0),
+				periph_parents, enable);
+	}
+
+	zynq_clk_register_periph_clk(lqspi, clk_max, clk_output_name[lqspi], NULL,
+				     SLCR_LQSPI_CLK_CTRL, periph_parents, 0);
+
+	zynq_clk_register_periph_clk(smc, clk_max, clk_output_name[smc], NULL,
+				     SLCR_SMC_CLK_CTRL, periph_parents, 0);
+
+	zynq_clk_register_periph_clk(pcap, clk_max, clk_output_name[pcap], NULL,
+				     SLCR_PCAP_CLK_CTRL, periph_parents, 0);
+
+	zynq_clk_register_periph_clk(sdio0, sdio1, clk_output_name[sdio0],
+			clk_output_name[sdio1], SLCR_SDIO_CLK_CTRL,
+			periph_parents, 1);
+
+	zynq_clk_register_periph_clk(uart0, uart1, clk_output_name[uart0],
+			clk_output_name[uart1], SLCR_UART_CLK_CTRL,
+			periph_parents, 1);
+
+	zynq_clk_register_periph_clk(spi0, spi1, clk_output_name[spi0],
+			clk_output_name[spi1], SLCR_SPI_CLK_CTRL,
+			periph_parents, 1);
+
+	for (i = 0; i < ARRAY_SIZE(gem0_emio_input_names); i++) {
+		int idx = of_property_match_string(np, "clock-names",
+				gem0_emio_input_names[i]);
+		if (idx >= 0)
+			gem0_mux_parents[i + 1] = of_clk_get_parent_name(np,
+					idx);
+	}
+	clk_register_mux(NULL, "gem0_mux", periph_parents, 4,
+			CLK_SET_RATE_NO_REPARENT, SLCR_GEM0_CLK_CTRL, 4, 2, 0,
+			&gem0clk_lock);
+	clk_register_divider(NULL, "gem0_div0", "gem0_mux", 0,
+			SLCR_GEM0_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED |
+			CLK_DIVIDER_ALLOW_ZERO, &gem0clk_lock);
+	clk_register_divider(NULL, "gem0_div1", "gem0_div0",
+			CLK_SET_RATE_PARENT, SLCR_GEM0_CLK_CTRL, 20, 6,
+			CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
+			&gem0clk_lock);
+	clk_register_mux(NULL, "gem0_emio_mux", gem0_mux_parents, 2,
+			CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+			SLCR_GEM0_CLK_CTRL, 6, 1, 0,
+			&gem0clk_lock);
+	clks[gem0] = clk_register_gate(NULL, clk_output_name[gem0],
+			"gem0_emio_mux", CLK_SET_RATE_PARENT,
+			SLCR_GEM0_CLK_CTRL, 0, 0, &gem0clk_lock);
+
+	for (i = 0; i < ARRAY_SIZE(gem1_emio_input_names); i++) {
+		int idx = of_property_match_string(np, "clock-names",
+				gem1_emio_input_names[i]);
+		if (idx >= 0)
+			gem1_mux_parents[i + 1] = of_clk_get_parent_name(np,
+					idx);
+	}
+	clk_register_mux(NULL, "gem1_mux", periph_parents, 4,
+			CLK_SET_RATE_NO_REPARENT, SLCR_GEM1_CLK_CTRL, 4, 2, 0,
+			&gem1clk_lock);
+	clk_register_divider(NULL, "gem1_div0", "gem1_mux", 0,
+			SLCR_GEM1_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED |
+			CLK_DIVIDER_ALLOW_ZERO, &gem1clk_lock);
+	clk_register_divider(NULL, "gem1_div1", "gem1_div0",
+			CLK_SET_RATE_PARENT, SLCR_GEM1_CLK_CTRL, 20, 6,
+			CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
+			&gem1clk_lock);
+	clk_register_mux(NULL, "gem1_emio_mux", gem1_mux_parents, 2,
+			CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+			SLCR_GEM1_CLK_CTRL, 6, 1, 0,
+			&gem1clk_lock);
+	clks[gem1] = clk_register_gate(NULL, clk_output_name[gem1],
+			"gem1_emio_mux", CLK_SET_RATE_PARENT,
+			SLCR_GEM1_CLK_CTRL, 0, 0, &gem1clk_lock);
+
+	tmp = strlen("mio_clk_00x");
+	clk_name = kmalloc(tmp, GFP_KERNEL);
+	for (i = 0; i < NUM_MIO_PINS; i++) {
+		int idx;
+
+		snprintf(clk_name, tmp, "mio_clk_%2.2d", i);
+		idx = of_property_match_string(np, "clock-names", clk_name);
+		if (idx >= 0)
+			can_mio_mux_parents[i] = of_clk_get_parent_name(np,
+						idx);
+		else
+			can_mio_mux_parents[i] = dummy_nm;
+	}
+	kfree(clk_name);
+	clk_register_mux(NULL, "can_mux", periph_parents, 4,
+			CLK_SET_RATE_NO_REPARENT, SLCR_CAN_CLK_CTRL, 4, 2, 0,
+			&canclk_lock);
+	clk_register_divider(NULL, "can_div0", "can_mux", 0,
+			SLCR_CAN_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED |
+			CLK_DIVIDER_ALLOW_ZERO, &canclk_lock);
+	clk_register_divider(NULL, "can_div1", "can_div0",
+			CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 20, 6,
+			CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
+			&canclk_lock);
+	clk_register_gate(NULL, "can0_gate", "can_div1",
+			CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 0, 0,
+			&canclk_lock);
+	clk_register_gate(NULL, "can1_gate", "can_div1",
+			CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 1, 0,
+			&canclk_lock);
+	clk_register_mux(NULL, "can0_mio_mux",
+			can_mio_mux_parents, 54, CLK_SET_RATE_PARENT |
+			CLK_SET_RATE_NO_REPARENT, SLCR_CAN_MIOCLK_CTRL, 0, 6, 0,
+			&canmioclk_lock);
+	clk_register_mux(NULL, "can1_mio_mux",
+			can_mio_mux_parents, 54, CLK_SET_RATE_PARENT |
+			CLK_SET_RATE_NO_REPARENT, SLCR_CAN_MIOCLK_CTRL, 16, 6,
+			0, &canmioclk_lock);
+	clks[can0] = clk_register_mux(NULL, clk_output_name[can0],
+			can0_mio_mux2_parents, 2, CLK_SET_RATE_PARENT |
+			CLK_SET_RATE_NO_REPARENT, SLCR_CAN_MIOCLK_CTRL, 6, 1, 0,
+			&canmioclk_lock);
+	clks[can1] = clk_register_mux(NULL, clk_output_name[can1],
+			can1_mio_mux2_parents, 2, CLK_SET_RATE_PARENT |
+			CLK_SET_RATE_NO_REPARENT, SLCR_CAN_MIOCLK_CTRL, 22, 1,
+			0, &canmioclk_lock);
+
+	for (i = 0; i < ARRAY_SIZE(dbgtrc_emio_input_names); i++) {
+		int idx = of_property_match_string(np, "clock-names",
+				dbgtrc_emio_input_names[i]);
+		if (idx >= 0)
+			dbg_emio_mux_parents[i + 1] = of_clk_get_parent_name(np,
+					idx);
+	}
+	clk_register_mux(NULL, "dbg_mux", periph_parents, 4,
+			CLK_SET_RATE_NO_REPARENT, SLCR_DBG_CLK_CTRL, 4, 2, 0,
+			&dbgclk_lock);
+	clk_register_divider(NULL, "dbg_div", "dbg_mux", 0,
+			SLCR_DBG_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED |
+			CLK_DIVIDER_ALLOW_ZERO, &dbgclk_lock);
+	clk_register_mux(NULL, "dbg_emio_mux", dbg_emio_mux_parents, 2,
+			CLK_SET_RATE_NO_REPARENT, SLCR_DBG_CLK_CTRL, 6, 1, 0,
+			&dbgclk_lock);
+	clks[dbg_trc] = clk_register_gate(NULL, clk_output_name[dbg_trc],
+			"dbg_emio_mux", CLK_SET_RATE_PARENT, SLCR_DBG_CLK_CTRL,
+			0, 0, &dbgclk_lock);
+	clks[dbg_apb] = clk_register_gate(NULL, clk_output_name[dbg_apb],
+			clk_output_name[cpu_1x], 0, SLCR_DBG_CLK_CTRL, 1, 0,
+			&dbgclk_lock);
+
+	/* leave debug clocks in the state the bootloader set them up to */
+	tmp = readl(SLCR_DBG_CLK_CTRL);
+	if (tmp & DBG_CLK_CTRL_CLKACT_TRC)
+		if (clk_prepare_enable(clks[dbg_trc]))
+			pr_warn("%s: trace clk enable failed\n", __func__);
+	if (tmp & DBG_CLK_CTRL_CPU_1XCLKACT)
+		if (clk_prepare_enable(clks[dbg_apb]))
+			pr_warn("%s: debug APB clk enable failed\n", __func__);
+
+	/* One gated clock for all APER clocks. */
+	clks[dma] = clk_register_gate(NULL, clk_output_name[dma],
+			clk_output_name[cpu_2x], 0, SLCR_APER_CLK_CTRL, 0, 0,
+			&aperclk_lock);
+	clks[usb0_aper] = clk_register_gate(NULL, clk_output_name[usb0_aper],
+			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 2, 0,
+			&aperclk_lock);
+	clks[usb1_aper] = clk_register_gate(NULL, clk_output_name[usb1_aper],
+			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 3, 0,
+			&aperclk_lock);
+	clks[gem0_aper] = clk_register_gate(NULL, clk_output_name[gem0_aper],
+			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 6, 0,
+			&aperclk_lock);
+	clks[gem1_aper] = clk_register_gate(NULL, clk_output_name[gem1_aper],
+			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 7, 0,
+			&aperclk_lock);
+	clks[sdio0_aper] = clk_register_gate(NULL, clk_output_name[sdio0_aper],
+			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 10, 0,
+			&aperclk_lock);
+	clks[sdio1_aper] = clk_register_gate(NULL, clk_output_name[sdio1_aper],
+			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 11, 0,
+			&aperclk_lock);
+	clks[spi0_aper] = clk_register_gate(NULL, clk_output_name[spi0_aper],
+			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 14, 0,
+			&aperclk_lock);
+	clks[spi1_aper] = clk_register_gate(NULL, clk_output_name[spi1_aper],
+			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 15, 0,
+			&aperclk_lock);
+	clks[can0_aper] = clk_register_gate(NULL, clk_output_name[can0_aper],
+			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 16, 0,
+			&aperclk_lock);
+	clks[can1_aper] = clk_register_gate(NULL, clk_output_name[can1_aper],
+			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 17, 0,
+			&aperclk_lock);
+	clks[i2c0_aper] = clk_register_gate(NULL, clk_output_name[i2c0_aper],
+			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 18, 0,
+			&aperclk_lock);
+	clks[i2c1_aper] = clk_register_gate(NULL, clk_output_name[i2c1_aper],
+			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 19, 0,
+			&aperclk_lock);
+	clks[uart0_aper] = clk_register_gate(NULL, clk_output_name[uart0_aper],
+			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 20, 0,
+			&aperclk_lock);
+	clks[uart1_aper] = clk_register_gate(NULL, clk_output_name[uart1_aper],
+			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 21, 0,
+			&aperclk_lock);
+	clks[gpio_aper] = clk_register_gate(NULL, clk_output_name[gpio_aper],
+			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 22, 0,
+			&aperclk_lock);
+	clks[lqspi_aper] = clk_register_gate(NULL, clk_output_name[lqspi_aper],
+			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 23, 0,
+			&aperclk_lock);
+	clks[smc_aper] = clk_register_gate(NULL, clk_output_name[smc_aper],
+			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 24, 0,
+			&aperclk_lock);
+
+	for (i = 0; i < ARRAY_SIZE(clks); i++) {
+		if (IS_ERR(clks[i])) {
+			pr_err("Zynq clk %d: register failed with %ld\n",
+			       i, PTR_ERR(clks[i]));
+			BUG();
+		}
+	}
+
+	clk_data.clks = clks;
+	clk_data.clk_num = ARRAY_SIZE(clks);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+
+CLK_OF_DECLARE(zynq_clkc, "xlnx,ps7-clkc", zynq_clk_setup);
+
+void __init zynq_clock_init(void)
+{
+	struct device_node *np;
+	struct device_node *slcr;
+	struct resource res;
+
+	np = of_find_compatible_node(NULL, NULL, "xlnx,ps7-clkc");
+	if (!np) {
+		pr_err("%s: clkc node not found\n", __func__);
+		goto np_err;
+	}
+
+	if (of_address_to_resource(np, 0, &res)) {
+		pr_err("%pOFn: failed to get resource\n", np);
+		goto np_err;
+	}
+
+	slcr = of_get_parent(np);
+
+	if (slcr->data) {
+		zynq_clkc_base = (__force void __iomem *)slcr->data + res.start;
+	} else {
+		pr_err("%pOFn: Unable to get I/O memory\n", np);
+		of_node_put(slcr);
+		goto np_err;
+	}
+
+	pr_info("%s: clkc starts at %p\n", __func__, zynq_clkc_base);
+
+	of_node_put(slcr);
+	of_node_put(np);
+
+	return;
+
+np_err:
+	of_node_put(np);
+	BUG();
+}