Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 242 insertions, 0 deletions

diff --git a/drivers/clocksource/asm9260_timer.c b/drivers/clocksource/asm9260_timer.c
new file mode 100644
index 000000000..5b39d3701
--- /dev/null
+++ b/drivers/clocksource/asm9260_timer.c
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/bitops.h>
+
+#define DRIVER_NAME	"asm9260-timer"
+
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+#define SET_REG 4
+#define CLR_REG 8
+
+#define HW_IR           0x0000 /* RW. Interrupt */
+#define BM_IR_CR0	BIT(4)
+#define BM_IR_MR3	BIT(3)
+#define BM_IR_MR2	BIT(2)
+#define BM_IR_MR1	BIT(1)
+#define BM_IR_MR0	BIT(0)
+
+#define HW_TCR		0x0010 /* RW. Timer controller */
+/* BM_C*_RST
+ * Timer Counter and the Prescale Counter are synchronously reset on the
+ * next positive edge of PCLK. The counters remain reset until TCR[1] is
+ * returned to zero. */
+#define BM_C3_RST	BIT(7)
+#define BM_C2_RST	BIT(6)
+#define BM_C1_RST	BIT(5)
+#define BM_C0_RST	BIT(4)
+/* BM_C*_EN
+ * 1 - Timer Counter and Prescale Counter are enabled for counting
+ * 0 - counters are disabled */
+#define BM_C3_EN	BIT(3)
+#define BM_C2_EN	BIT(2)
+#define BM_C1_EN	BIT(1)
+#define BM_C0_EN	BIT(0)
+
+#define HW_DIR		0x0020 /* RW. Direction? */
+/* 00 - count up
+ * 01 - count down
+ * 10 - ?? 2^n/2 */
+#define BM_DIR_COUNT_UP		0
+#define BM_DIR_COUNT_DOWN	1
+#define BM_DIR0_SHIFT	0
+#define BM_DIR1_SHIFT	4
+#define BM_DIR2_SHIFT	8
+#define BM_DIR3_SHIFT	12
+#define BM_DIR_DEFAULT		(BM_DIR_COUNT_UP << BM_DIR0_SHIFT | \
+				 BM_DIR_COUNT_UP << BM_DIR1_SHIFT | \
+				 BM_DIR_COUNT_UP << BM_DIR2_SHIFT | \
+				 BM_DIR_COUNT_UP << BM_DIR3_SHIFT)
+
+#define HW_TC0		0x0030 /* RO. Timer counter 0 */
+/* HW_TC*. Timer counter owerflow (0xffff.ffff to 0x0000.0000) do not generate
+ * interrupt. This registers can be used to detect overflow */
+#define HW_TC1          0x0040
+#define HW_TC2		0x0050
+#define HW_TC3		0x0060
+
+#define HW_PR		0x0070 /* RW. prescaler */
+#define BM_PR_DISABLE	0
+#define HW_PC		0x0080 /* RO. Prescaler counter */
+#define HW_MCR		0x0090 /* RW. Match control */
+/* enable interrupt on match */
+#define BM_MCR_INT_EN(n)	(1 << (n * 3 + 0))
+/* enable TC reset on match */
+#define BM_MCR_RES_EN(n)	(1 << (n * 3 + 1))
+/* enable stop TC on match */
+#define BM_MCR_STOP_EN(n)	(1 << (n * 3 + 2))
+
+#define HW_MR0		0x00a0 /* RW. Match reg */
+#define HW_MR1		0x00b0
+#define HW_MR2		0x00C0
+#define HW_MR3		0x00D0
+
+#define HW_CTCR		0x0180 /* Counter control */
+#define BM_CTCR0_SHIFT	0
+#define BM_CTCR1_SHIFT	2
+#define BM_CTCR2_SHIFT	4
+#define BM_CTCR3_SHIFT	6
+#define BM_CTCR_TM	0	/* Timer mode. Every rising PCLK edge. */
+#define BM_CTCR_DEFAULT	(BM_CTCR_TM << BM_CTCR0_SHIFT | \
+			 BM_CTCR_TM << BM_CTCR1_SHIFT | \
+			 BM_CTCR_TM << BM_CTCR2_SHIFT | \
+			 BM_CTCR_TM << BM_CTCR3_SHIFT)
+
+static struct asm9260_timer_priv {
+	void __iomem *base;
+	unsigned long ticks_per_jiffy;
+} priv;
+
+static int asm9260_timer_set_next_event(unsigned long delta,
+					 struct clock_event_device *evt)
+{
+	/* configure match count for TC0 */
+	writel_relaxed(delta, priv.base + HW_MR0);
+	/* enable TC0 */
+	writel_relaxed(BM_C0_EN, priv.base + HW_TCR + SET_REG);
+	return 0;
+}
+
+static inline void __asm9260_timer_shutdown(struct clock_event_device *evt)
+{
+	/* stop timer0 */
+	writel_relaxed(BM_C0_EN, priv.base + HW_TCR + CLR_REG);
+}
+
+static int asm9260_timer_shutdown(struct clock_event_device *evt)
+{
+	__asm9260_timer_shutdown(evt);
+	return 0;
+}
+
+static int asm9260_timer_set_oneshot(struct clock_event_device *evt)
+{
+	__asm9260_timer_shutdown(evt);
+
+	/* enable reset and stop on match */
+	writel_relaxed(BM_MCR_RES_EN(0) | BM_MCR_STOP_EN(0),
+		       priv.base + HW_MCR + SET_REG);
+	return 0;
+}
+
+static int asm9260_timer_set_periodic(struct clock_event_device *evt)
+{
+	__asm9260_timer_shutdown(evt);
+
+	/* disable reset and stop on match */
+	writel_relaxed(BM_MCR_RES_EN(0) | BM_MCR_STOP_EN(0),
+		       priv.base + HW_MCR + CLR_REG);
+	/* configure match count for TC0 */
+	writel_relaxed(priv.ticks_per_jiffy, priv.base + HW_MR0);
+	/* enable TC0 */
+	writel_relaxed(BM_C0_EN, priv.base + HW_TCR + SET_REG);
+	return 0;
+}
+
+static struct clock_event_device event_dev = {
+	.name			= DRIVER_NAME,
+	.rating			= 200,
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event		= asm9260_timer_set_next_event,
+	.set_state_shutdown	= asm9260_timer_shutdown,
+	.set_state_periodic	= asm9260_timer_set_periodic,
+	.set_state_oneshot	= asm9260_timer_set_oneshot,
+	.tick_resume		= asm9260_timer_shutdown,
+};
+
+static irqreturn_t asm9260_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	evt->event_handler(evt);
+
+	writel_relaxed(BM_IR_MR0, priv.base + HW_IR);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * ---------------------------------------------------------------------------
+ * Timer initialization
+ * ---------------------------------------------------------------------------
+ */
+static int __init asm9260_timer_init(struct device_node *np)
+{
+	int irq;
+	struct clk *clk;
+	int ret;
+	unsigned long rate;
+
+	priv.base = of_io_request_and_map(np, 0, np->name);
+	if (IS_ERR(priv.base)) {
+		pr_err("%pOFn: unable to map resource\n", np);
+		return PTR_ERR(priv.base);
+	}
+
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk)) {
+		pr_err("Failed to get clk!\n");
+		return PTR_ERR(clk);
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("Failed to enable clk!\n");
+		return ret;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	ret = request_irq(irq, asm9260_timer_interrupt, IRQF_TIMER,
+			DRIVER_NAME, &event_dev);
+	if (ret) {
+		pr_err("Failed to setup irq!\n");
+		return ret;
+	}
+
+	/* set all timers for count-up */
+	writel_relaxed(BM_DIR_DEFAULT, priv.base + HW_DIR);
+	/* disable divider */
+	writel_relaxed(BM_PR_DISABLE, priv.base + HW_PR);
+	/* make sure all timers use every rising PCLK edge. */
+	writel_relaxed(BM_CTCR_DEFAULT, priv.base + HW_CTCR);
+	/* enable interrupt for TC0 and clean setting for all other lines */
+	writel_relaxed(BM_MCR_INT_EN(0) , priv.base + HW_MCR);
+
+	rate = clk_get_rate(clk);
+	clocksource_mmio_init(priv.base + HW_TC1, DRIVER_NAME, rate,
+			200, 32, clocksource_mmio_readl_up);
+
+	/* Seems like we can't use counter without match register even if
+	 * actions for MR are disabled. So, set MR to max value. */
+	writel_relaxed(0xffffffff, priv.base + HW_MR1);
+	/* enable TC1 */
+	writel_relaxed(BM_C1_EN, priv.base + HW_TCR + SET_REG);
+
+	priv.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
+	event_dev.cpumask = cpumask_of(0);
+	clockevents_config_and_register(&event_dev, rate, 0x2c00, 0xfffffffe);
+
+	return 0;
+}
+TIMER_OF_DECLARE(asm9260_timer, "alphascale,asm9260-timer",
+		asm9260_timer_init);