Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 253 insertions, 0 deletions

diff --git a/drivers/clocksource/timer-msc313e.c b/drivers/clocksource/timer-msc313e.c
new file mode 100644
index 000000000..54c54ca7c
--- /dev/null
+++ b/drivers/clocksource/timer-msc313e.c
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MStar timer driver
+ *
+ * Copyright (C) 2021 Daniel Palmer
+ * Copyright (C) 2021 Romain Perier
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqreturn.h>
+#include <linux/sched_clock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#ifdef CONFIG_ARM
+#include <linux/delay.h>
+#endif
+
+#include "timer-of.h"
+
+#define TIMER_NAME "msc313e_timer"
+
+#define MSC313E_REG_CTRL		0x00
+#define MSC313E_REG_CTRL_TIMER_EN	BIT(0)
+#define MSC313E_REG_CTRL_TIMER_TRIG	BIT(1)
+#define MSC313E_REG_CTRL_TIMER_INT_EN	BIT(8)
+#define MSC313E_REG_TIMER_MAX_LOW	0x08
+#define MSC313E_REG_TIMER_MAX_HIGH	0x0c
+#define MSC313E_REG_COUNTER_LOW		0x10
+#define MSC313E_REG_COUNTER_HIGH	0x14
+#define MSC313E_REG_TIMER_DIVIDE	0x18
+
+#define MSC313E_CLK_DIVIDER		9
+#define TIMER_SYNC_TICKS		3
+
+#ifdef CONFIG_ARM
+struct msc313e_delay {
+	void __iomem *base;
+	struct delay_timer delay;
+};
+static struct msc313e_delay msc313e_delay;
+#endif
+
+static void __iomem *msc313e_clksrc;
+
+static void msc313e_timer_stop(void __iomem *base)
+{
+	writew(0, base + MSC313E_REG_CTRL);
+}
+
+static void msc313e_timer_start(void __iomem *base, bool periodic)
+{
+	u16 reg;
+
+	reg = readw(base + MSC313E_REG_CTRL);
+	if (periodic)
+		reg |= MSC313E_REG_CTRL_TIMER_EN;
+	else
+		reg |= MSC313E_REG_CTRL_TIMER_TRIG;
+	writew(reg | MSC313E_REG_CTRL_TIMER_INT_EN, base + MSC313E_REG_CTRL);
+}
+
+static void msc313e_timer_setup(void __iomem *base, unsigned long delay)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	writew(delay >> 16, base + MSC313E_REG_TIMER_MAX_HIGH);
+	writew(delay & 0xffff, base + MSC313E_REG_TIMER_MAX_LOW);
+	local_irq_restore(flags);
+}
+
+static unsigned long msc313e_timer_current_value(void __iomem *base)
+{
+	unsigned long flags;
+	u16 l, h;
+
+	local_irq_save(flags);
+	l = readw(base + MSC313E_REG_COUNTER_LOW);
+	h = readw(base + MSC313E_REG_COUNTER_HIGH);
+	local_irq_restore(flags);
+
+	return (((u32)h) << 16 | l);
+}
+
+static int msc313e_timer_clkevt_shutdown(struct clock_event_device *evt)
+{
+	struct timer_of *timer = to_timer_of(evt);
+
+	msc313e_timer_stop(timer_of_base(timer));
+
+	return 0;
+}
+
+static int msc313e_timer_clkevt_set_oneshot(struct clock_event_device *evt)
+{
+	struct timer_of *timer = to_timer_of(evt);
+
+	msc313e_timer_stop(timer_of_base(timer));
+	msc313e_timer_start(timer_of_base(timer), false);
+
+	return 0;
+}
+
+static int msc313e_timer_clkevt_set_periodic(struct clock_event_device *evt)
+{
+	struct timer_of *timer = to_timer_of(evt);
+
+	msc313e_timer_stop(timer_of_base(timer));
+	msc313e_timer_setup(timer_of_base(timer), timer_of_period(timer));
+	msc313e_timer_start(timer_of_base(timer), true);
+
+	return 0;
+}
+
+static int msc313e_timer_clkevt_next_event(unsigned long evt, struct clock_event_device *clkevt)
+{
+	struct timer_of *timer = to_timer_of(clkevt);
+
+	msc313e_timer_stop(timer_of_base(timer));
+	msc313e_timer_setup(timer_of_base(timer), evt);
+	msc313e_timer_start(timer_of_base(timer), false);
+
+	return 0;
+}
+
+static irqreturn_t msc313e_timer_clkevt_irq(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static u64 msc313e_timer_clksrc_read(struct clocksource *cs)
+{
+	return msc313e_timer_current_value(msc313e_clksrc) & cs->mask;
+}
+
+#ifdef CONFIG_ARM
+static unsigned long msc313e_read_delay_timer_read(void)
+{
+	return msc313e_timer_current_value(msc313e_delay.base);
+}
+#endif
+
+static u64 msc313e_timer_sched_clock_read(void)
+{
+	return msc313e_timer_current_value(msc313e_clksrc);
+}
+
+static struct clock_event_device msc313e_clkevt = {
+	.name = TIMER_NAME,
+	.rating = 300,
+	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown = msc313e_timer_clkevt_shutdown,
+	.set_state_periodic = msc313e_timer_clkevt_set_periodic,
+	.set_state_oneshot = msc313e_timer_clkevt_set_oneshot,
+	.tick_resume = msc313e_timer_clkevt_shutdown,
+	.set_next_event = msc313e_timer_clkevt_next_event,
+};
+
+static int __init msc313e_clkevt_init(struct device_node *np)
+{
+	int ret;
+	struct timer_of *to;
+
+	to = kzalloc(sizeof(*to), GFP_KERNEL);
+	if (!to)
+		return -ENOMEM;
+
+	to->flags = TIMER_OF_IRQ | TIMER_OF_CLOCK | TIMER_OF_BASE;
+	to->of_irq.handler = msc313e_timer_clkevt_irq;
+	ret = timer_of_init(np, to);
+	if (ret)
+		return ret;
+
+	if (of_device_is_compatible(np, "sstar,ssd20xd-timer")) {
+		to->of_clk.rate = clk_get_rate(to->of_clk.clk) / MSC313E_CLK_DIVIDER;
+		to->of_clk.period = DIV_ROUND_UP(to->of_clk.rate, HZ);
+		writew(MSC313E_CLK_DIVIDER - 1, timer_of_base(to) + MSC313E_REG_TIMER_DIVIDE);
+	}
+
+	msc313e_clkevt.cpumask = cpu_possible_mask;
+	msc313e_clkevt.irq = to->of_irq.irq;
+	to->clkevt = msc313e_clkevt;
+
+	clockevents_config_and_register(&to->clkevt, timer_of_rate(to),
+					TIMER_SYNC_TICKS, 0xffffffff);
+	return 0;
+}
+
+static int __init msc313e_clksrc_init(struct device_node *np)
+{
+	struct timer_of to = { 0 };
+	int ret;
+	u16 reg;
+
+	to.flags = TIMER_OF_BASE | TIMER_OF_CLOCK;
+	ret = timer_of_init(np, &to);
+	if (ret)
+		return ret;
+
+	msc313e_clksrc = timer_of_base(&to);
+	reg = readw(msc313e_clksrc + MSC313E_REG_CTRL);
+	reg |= MSC313E_REG_CTRL_TIMER_EN;
+	writew(reg, msc313e_clksrc + MSC313E_REG_CTRL);
+
+#ifdef CONFIG_ARM
+	msc313e_delay.base = timer_of_base(&to);
+	msc313e_delay.delay.read_current_timer = msc313e_read_delay_timer_read;
+	msc313e_delay.delay.freq = timer_of_rate(&to);
+
+	register_current_timer_delay(&msc313e_delay.delay);
+#endif
+
+	sched_clock_register(msc313e_timer_sched_clock_read, 32, timer_of_rate(&to));
+	return clocksource_mmio_init(timer_of_base(&to), TIMER_NAME, timer_of_rate(&to), 300, 32,
+				     msc313e_timer_clksrc_read);
+}
+
+static int __init msc313e_timer_init(struct device_node *np)
+{
+	int ret = 0;
+	static int num_called;
+
+	switch (num_called) {
+	case 0:
+		ret = msc313e_clksrc_init(np);
+		if (ret)
+			return ret;
+		break;
+
+	default:
+		ret = msc313e_clkevt_init(np);
+		if (ret)
+			return ret;
+		break;
+	}
+
+	num_called++;
+
+	return 0;
+}
+
+TIMER_OF_DECLARE(msc313, "mstar,msc313e-timer", msc313e_timer_init);
+TIMER_OF_DECLARE(ssd20xd, "sstar,ssd20xd-timer", msc313e_timer_init);