Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 687 insertions, 0 deletions

diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
new file mode 100644
index 000000000..76c888ed8
--- /dev/null
+++ b/drivers/cpufreq/s5pv210-cpufreq.c
@@ -0,0 +1,687 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * CPU frequency scaling for S5PC110/S5PV210
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/cpufreq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regulator/consumer.h>
+
+static void __iomem *clk_base;
+static void __iomem *dmc_base[2];
+
+#define S5P_CLKREG(x)		(clk_base + (x))
+
+#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
+#define S5P_APLL_CON		S5P_CLKREG(0x100)
+#define S5P_CLK_SRC0		S5P_CLKREG(0x200)
+#define S5P_CLK_SRC2		S5P_CLKREG(0x208)
+#define S5P_CLK_DIV0		S5P_CLKREG(0x300)
+#define S5P_CLK_DIV2		S5P_CLKREG(0x308)
+#define S5P_CLK_DIV6		S5P_CLKREG(0x318)
+#define S5P_CLKDIV_STAT0	S5P_CLKREG(0x1000)
+#define S5P_CLKDIV_STAT1	S5P_CLKREG(0x1004)
+#define S5P_CLKMUX_STAT0	S5P_CLKREG(0x1100)
+#define S5P_CLKMUX_STAT1	S5P_CLKREG(0x1104)
+
+#define S5P_ARM_MCS_CON		S5P_CLKREG(0x6100)
+
+/* CLKSRC0 */
+#define S5P_CLKSRC0_MUX200_SHIFT	(16)
+#define S5P_CLKSRC0_MUX200_MASK		(0x1 << S5P_CLKSRC0_MUX200_SHIFT)
+#define S5P_CLKSRC0_MUX166_MASK		(0x1<<20)
+#define S5P_CLKSRC0_MUX133_MASK		(0x1<<24)
+
+/* CLKSRC2 */
+#define S5P_CLKSRC2_G3D_SHIFT           (0)
+#define S5P_CLKSRC2_G3D_MASK            (0x3 << S5P_CLKSRC2_G3D_SHIFT)
+#define S5P_CLKSRC2_MFC_SHIFT           (4)
+#define S5P_CLKSRC2_MFC_MASK            (0x3 << S5P_CLKSRC2_MFC_SHIFT)
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_APLL_SHIFT		(0)
+#define S5P_CLKDIV0_APLL_MASK		(0x7 << S5P_CLKDIV0_APLL_SHIFT)
+#define S5P_CLKDIV0_A2M_SHIFT		(4)
+#define S5P_CLKDIV0_A2M_MASK		(0x7 << S5P_CLKDIV0_A2M_SHIFT)
+#define S5P_CLKDIV0_HCLK200_SHIFT	(8)
+#define S5P_CLKDIV0_HCLK200_MASK	(0x7 << S5P_CLKDIV0_HCLK200_SHIFT)
+#define S5P_CLKDIV0_PCLK100_SHIFT	(12)
+#define S5P_CLKDIV0_PCLK100_MASK	(0x7 << S5P_CLKDIV0_PCLK100_SHIFT)
+#define S5P_CLKDIV0_HCLK166_SHIFT	(16)
+#define S5P_CLKDIV0_HCLK166_MASK	(0xF << S5P_CLKDIV0_HCLK166_SHIFT)
+#define S5P_CLKDIV0_PCLK83_SHIFT	(20)
+#define S5P_CLKDIV0_PCLK83_MASK		(0x7 << S5P_CLKDIV0_PCLK83_SHIFT)
+#define S5P_CLKDIV0_HCLK133_SHIFT	(24)
+#define S5P_CLKDIV0_HCLK133_MASK	(0xF << S5P_CLKDIV0_HCLK133_SHIFT)
+#define S5P_CLKDIV0_PCLK66_SHIFT	(28)
+#define S5P_CLKDIV0_PCLK66_MASK		(0x7 << S5P_CLKDIV0_PCLK66_SHIFT)
+
+/* CLKDIV2 */
+#define S5P_CLKDIV2_G3D_SHIFT           (0)
+#define S5P_CLKDIV2_G3D_MASK            (0xF << S5P_CLKDIV2_G3D_SHIFT)
+#define S5P_CLKDIV2_MFC_SHIFT           (4)
+#define S5P_CLKDIV2_MFC_MASK            (0xF << S5P_CLKDIV2_MFC_SHIFT)
+
+/* CLKDIV6 */
+#define S5P_CLKDIV6_ONEDRAM_SHIFT       (28)
+#define S5P_CLKDIV6_ONEDRAM_MASK        (0xF << S5P_CLKDIV6_ONEDRAM_SHIFT)
+
+static struct clk *dmc0_clk;
+static struct clk *dmc1_clk;
+static DEFINE_MUTEX(set_freq_lock);
+
+/* APLL M,P,S values for 1G/800Mhz */
+#define APLL_VAL_1000	((1 << 31) | (125 << 16) | (3 << 8) | 1)
+#define APLL_VAL_800	((1 << 31) | (100 << 16) | (3 << 8) | 1)
+
+/* Use 800MHz when entering sleep mode */
+#define SLEEP_FREQ	(800 * 1000)
+
+/* Tracks if CPU frequency can be updated anymore */
+static bool no_cpufreq_access;
+
+/*
+ * DRAM configurations to calculate refresh counter for changing
+ * frequency of memory.
+ */
+struct dram_conf {
+	unsigned long freq;	/* HZ */
+	unsigned long refresh;	/* DRAM refresh counter * 1000 */
+};
+
+/* DRAM configuration (DMC0 and DMC1) */
+static struct dram_conf s5pv210_dram_conf[2];
+
+enum perf_level {
+	L0, L1, L2, L3, L4,
+};
+
+enum s5pv210_mem_type {
+	LPDDR	= 0x1,
+	LPDDR2	= 0x2,
+	DDR2	= 0x4,
+};
+
+enum s5pv210_dmc_port {
+	DMC0 = 0,
+	DMC1,
+};
+
+static struct cpufreq_frequency_table s5pv210_freq_table[] = {
+	{0, L0, 1000*1000},
+	{0, L1, 800*1000},
+	{0, L2, 400*1000},
+	{0, L3, 200*1000},
+	{0, L4, 100*1000},
+	{0, 0, CPUFREQ_TABLE_END},
+};
+
+static struct regulator *arm_regulator;
+static struct regulator *int_regulator;
+
+struct s5pv210_dvs_conf {
+	int arm_volt;	/* uV */
+	int int_volt;	/* uV */
+};
+
+static const int arm_volt_max = 1350000;
+static const int int_volt_max = 1250000;
+
+static struct s5pv210_dvs_conf dvs_conf[] = {
+	[L0] = {
+		.arm_volt	= 1250000,
+		.int_volt	= 1100000,
+	},
+	[L1] = {
+		.arm_volt	= 1200000,
+		.int_volt	= 1100000,
+	},
+	[L2] = {
+		.arm_volt	= 1050000,
+		.int_volt	= 1100000,
+	},
+	[L3] = {
+		.arm_volt	= 950000,
+		.int_volt	= 1100000,
+	},
+	[L4] = {
+		.arm_volt	= 950000,
+		.int_volt	= 1000000,
+	},
+};
+
+static u32 clkdiv_val[5][11] = {
+	/*
+	 * Clock divider value for following
+	 * { APLL, A2M, HCLK_MSYS, PCLK_MSYS,
+	 *   HCLK_DSYS, PCLK_DSYS, HCLK_PSYS, PCLK_PSYS,
+	 *   ONEDRAM, MFC, G3D }
+	 */
+
+	/* L0 : [1000/200/100][166/83][133/66][200/200] */
+	{0, 4, 4, 1, 3, 1, 4, 1, 3, 0, 0},
+
+	/* L1 : [800/200/100][166/83][133/66][200/200] */
+	{0, 3, 3, 1, 3, 1, 4, 1, 3, 0, 0},
+
+	/* L2 : [400/200/100][166/83][133/66][200/200] */
+	{1, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0},
+
+	/* L3 : [200/200/100][166/83][133/66][200/200] */
+	{3, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0},
+
+	/* L4 : [100/100/100][83/83][66/66][100/100] */
+	{7, 7, 0, 0, 7, 0, 9, 0, 7, 0, 0},
+};
+
+/*
+ * This function set DRAM refresh counter
+ * according to operating frequency of DRAM
+ * ch: DMC port number 0 or 1
+ * freq: Operating frequency of DRAM(KHz)
+ */
+static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
+{
+	unsigned long tmp, tmp1;
+	void __iomem *reg = NULL;
+
+	if (ch == DMC0) {
+		reg = (dmc_base[0] + 0x30);
+	} else if (ch == DMC1) {
+		reg = (dmc_base[1] + 0x30);
+	} else {
+		pr_err("Cannot find DMC port\n");
+		return;
+	}
+
+	/* Find current DRAM frequency */
+	tmp = s5pv210_dram_conf[ch].freq;
+
+	tmp /= freq;
+
+	tmp1 = s5pv210_dram_conf[ch].refresh;
+
+	tmp1 /= tmp;
+
+	writel_relaxed(tmp1, reg);
+}
+
+static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
+{
+	unsigned long reg;
+	unsigned int priv_index;
+	unsigned int pll_changing = 0;
+	unsigned int bus_speed_changing = 0;
+	unsigned int old_freq, new_freq;
+	int arm_volt, int_volt;
+	int ret = 0;
+
+	mutex_lock(&set_freq_lock);
+
+	if (no_cpufreq_access) {
+		pr_err("Denied access to %s as it is disabled temporarily\n",
+		       __func__);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	old_freq = policy->cur;
+	new_freq = s5pv210_freq_table[index].frequency;
+
+	/* Finding current running level index */
+	priv_index = cpufreq_table_find_index_h(policy, old_freq, false);
+
+	arm_volt = dvs_conf[index].arm_volt;
+	int_volt = dvs_conf[index].int_volt;
+
+	if (new_freq > old_freq) {
+		ret = regulator_set_voltage(arm_regulator,
+				arm_volt, arm_volt_max);
+		if (ret)
+			goto exit;
+
+		ret = regulator_set_voltage(int_regulator,
+				int_volt, int_volt_max);
+		if (ret)
+			goto exit;
+	}
+
+	/* Check if there need to change PLL */
+	if ((index == L0) || (priv_index == L0))
+		pll_changing = 1;
+
+	/* Check if there need to change System bus clock */
+	if ((index == L4) || (priv_index == L4))
+		bus_speed_changing = 1;
+
+	if (bus_speed_changing) {
+		/*
+		 * Reconfigure DRAM refresh counter value for minimum
+		 * temporary clock while changing divider.
+		 * expected clock is 83Mhz : 7.8usec/(1/83Mhz) = 0x287
+		 */
+		if (pll_changing)
+			s5pv210_set_refresh(DMC1, 83000);
+		else
+			s5pv210_set_refresh(DMC1, 100000);
+
+		s5pv210_set_refresh(DMC0, 83000);
+	}
+
+	/*
+	 * APLL should be changed in this level
+	 * APLL -> MPLL(for stable transition) -> APLL
+	 * Some clock source's clock API are not prepared.
+	 * Do not use clock API in below code.
+	 */
+	if (pll_changing) {
+		/*
+		 * 1. Temporary Change divider for MFC and G3D
+		 * SCLKA2M(200/1=200)->(200/4=50)Mhz
+		 */
+		reg = readl_relaxed(S5P_CLK_DIV2);
+		reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
+		reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) |
+			(3 << S5P_CLKDIV2_MFC_SHIFT);
+		writel_relaxed(reg, S5P_CLK_DIV2);
+
+		/* For MFC, G3D dividing */
+		do {
+			reg = readl_relaxed(S5P_CLKDIV_STAT0);
+		} while (reg & ((1 << 16) | (1 << 17)));
+
+		/*
+		 * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX
+		 * (200/4=50)->(667/4=166)Mhz
+		 */
+		reg = readl_relaxed(S5P_CLK_SRC2);
+		reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
+		reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) |
+			(1 << S5P_CLKSRC2_MFC_SHIFT);
+		writel_relaxed(reg, S5P_CLK_SRC2);
+
+		do {
+			reg = readl_relaxed(S5P_CLKMUX_STAT1);
+		} while (reg & ((1 << 7) | (1 << 3)));
+
+		/*
+		 * 3. DMC1 refresh count for 133Mhz if (index == L4) is
+		 * true refresh counter is already programmed in upper
+		 * code. 0x287@83Mhz
+		 */
+		if (!bus_speed_changing)
+			s5pv210_set_refresh(DMC1, 133000);
+
+		/* 4. SCLKAPLL -> SCLKMPLL */
+		reg = readl_relaxed(S5P_CLK_SRC0);
+		reg &= ~(S5P_CLKSRC0_MUX200_MASK);
+		reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT);
+		writel_relaxed(reg, S5P_CLK_SRC0);
+
+		do {
+			reg = readl_relaxed(S5P_CLKMUX_STAT0);
+		} while (reg & (0x1 << 18));
+
+	}
+
+	/* Change divider */
+	reg = readl_relaxed(S5P_CLK_DIV0);
+
+	reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK |
+		S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK |
+		S5P_CLKDIV0_HCLK166_MASK | S5P_CLKDIV0_PCLK83_MASK |
+		S5P_CLKDIV0_HCLK133_MASK | S5P_CLKDIV0_PCLK66_MASK);
+
+	reg |= ((clkdiv_val[index][0] << S5P_CLKDIV0_APLL_SHIFT) |
+		(clkdiv_val[index][1] << S5P_CLKDIV0_A2M_SHIFT) |
+		(clkdiv_val[index][2] << S5P_CLKDIV0_HCLK200_SHIFT) |
+		(clkdiv_val[index][3] << S5P_CLKDIV0_PCLK100_SHIFT) |
+		(clkdiv_val[index][4] << S5P_CLKDIV0_HCLK166_SHIFT) |
+		(clkdiv_val[index][5] << S5P_CLKDIV0_PCLK83_SHIFT) |
+		(clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) |
+		(clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT));
+
+	writel_relaxed(reg, S5P_CLK_DIV0);
+
+	do {
+		reg = readl_relaxed(S5P_CLKDIV_STAT0);
+	} while (reg & 0xff);
+
+	/* ARM MCS value changed */
+	reg = readl_relaxed(S5P_ARM_MCS_CON);
+	reg &= ~0x3;
+	if (index >= L3)
+		reg |= 0x3;
+	else
+		reg |= 0x1;
+
+	writel_relaxed(reg, S5P_ARM_MCS_CON);
+
+	if (pll_changing) {
+		/* 5. Set Lock time = 30us*24Mhz = 0x2cf */
+		writel_relaxed(0x2cf, S5P_APLL_LOCK);
+
+		/*
+		 * 6. Turn on APLL
+		 * 6-1. Set PMS values
+		 * 6-2. Wait until the PLL is locked
+		 */
+		if (index == L0)
+			writel_relaxed(APLL_VAL_1000, S5P_APLL_CON);
+		else
+			writel_relaxed(APLL_VAL_800, S5P_APLL_CON);
+
+		do {
+			reg = readl_relaxed(S5P_APLL_CON);
+		} while (!(reg & (0x1 << 29)));
+
+		/*
+		 * 7. Change source clock from SCLKMPLL(667Mhz)
+		 * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX
+		 * (667/4=166)->(200/4=50)Mhz
+		 */
+		reg = readl_relaxed(S5P_CLK_SRC2);
+		reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
+		reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) |
+			(0 << S5P_CLKSRC2_MFC_SHIFT);
+		writel_relaxed(reg, S5P_CLK_SRC2);
+
+		do {
+			reg = readl_relaxed(S5P_CLKMUX_STAT1);
+		} while (reg & ((1 << 7) | (1 << 3)));
+
+		/*
+		 * 8. Change divider for MFC and G3D
+		 * (200/4=50)->(200/1=200)Mhz
+		 */
+		reg = readl_relaxed(S5P_CLK_DIV2);
+		reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
+		reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) |
+			(clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT);
+		writel_relaxed(reg, S5P_CLK_DIV2);
+
+		/* For MFC, G3D dividing */
+		do {
+			reg = readl_relaxed(S5P_CLKDIV_STAT0);
+		} while (reg & ((1 << 16) | (1 << 17)));
+
+		/* 9. Change MPLL to APLL in MSYS_MUX */
+		reg = readl_relaxed(S5P_CLK_SRC0);
+		reg &= ~(S5P_CLKSRC0_MUX200_MASK);
+		reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT);
+		writel_relaxed(reg, S5P_CLK_SRC0);
+
+		do {
+			reg = readl_relaxed(S5P_CLKMUX_STAT0);
+		} while (reg & (0x1 << 18));
+
+		/*
+		 * 10. DMC1 refresh counter
+		 * L4 : DMC1 = 100Mhz 7.8us/(1/100) = 0x30c
+		 * Others : DMC1 = 200Mhz 7.8us/(1/200) = 0x618
+		 */
+		if (!bus_speed_changing)
+			s5pv210_set_refresh(DMC1, 200000);
+	}
+
+	/*
+	 * L4 level needs to change memory bus speed, hence ONEDRAM clock
+	 * divider and memory refresh parameter should be changed
+	 */
+	if (bus_speed_changing) {
+		reg = readl_relaxed(S5P_CLK_DIV6);
+		reg &= ~S5P_CLKDIV6_ONEDRAM_MASK;
+		reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT);
+		writel_relaxed(reg, S5P_CLK_DIV6);
+
+		do {
+			reg = readl_relaxed(S5P_CLKDIV_STAT1);
+		} while (reg & (1 << 15));
+
+		/* Reconfigure DRAM refresh counter value */
+		if (index != L4) {
+			/*
+			 * DMC0 : 166Mhz
+			 * DMC1 : 200Mhz
+			 */
+			s5pv210_set_refresh(DMC0, 166000);
+			s5pv210_set_refresh(DMC1, 200000);
+		} else {
+			/*
+			 * DMC0 : 83Mhz
+			 * DMC1 : 100Mhz
+			 */
+			s5pv210_set_refresh(DMC0, 83000);
+			s5pv210_set_refresh(DMC1, 100000);
+		}
+	}
+
+	if (new_freq < old_freq) {
+		regulator_set_voltage(int_regulator,
+				int_volt, int_volt_max);
+
+		regulator_set_voltage(arm_regulator,
+				arm_volt, arm_volt_max);
+	}
+
+	pr_debug("Perf changed[L%d]\n", index);
+
+exit:
+	mutex_unlock(&set_freq_lock);
+	return ret;
+}
+
+static int check_mem_type(void __iomem *dmc_reg)
+{
+	unsigned long val;
+
+	val = readl_relaxed(dmc_reg + 0x4);
+	val = (val & (0xf << 8));
+
+	return val >> 8;
+}
+
+static int s5pv210_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned long mem_type;
+	int ret;
+
+	policy->clk = clk_get(NULL, "armclk");
+	if (IS_ERR(policy->clk))
+		return PTR_ERR(policy->clk);
+
+	dmc0_clk = clk_get(NULL, "sclk_dmc0");
+	if (IS_ERR(dmc0_clk)) {
+		ret = PTR_ERR(dmc0_clk);
+		goto out_dmc0;
+	}
+
+	dmc1_clk = clk_get(NULL, "hclk_msys");
+	if (IS_ERR(dmc1_clk)) {
+		ret = PTR_ERR(dmc1_clk);
+		goto out_dmc1;
+	}
+
+	if (policy->cpu != 0) {
+		ret = -EINVAL;
+		goto out_dmc1;
+	}
+
+	/*
+	 * check_mem_type : This driver only support LPDDR & LPDDR2.
+	 * other memory type is not supported.
+	 */
+	mem_type = check_mem_type(dmc_base[0]);
+
+	if ((mem_type != LPDDR) && (mem_type != LPDDR2)) {
+		pr_err("CPUFreq doesn't support this memory type\n");
+		ret = -EINVAL;
+		goto out_dmc1;
+	}
+
+	/* Find current refresh counter and frequency each DMC */
+	s5pv210_dram_conf[0].refresh = (readl_relaxed(dmc_base[0] + 0x30) * 1000);
+	s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk);
+
+	s5pv210_dram_conf[1].refresh = (readl_relaxed(dmc_base[1] + 0x30) * 1000);
+	s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk);
+
+	policy->suspend_freq = SLEEP_FREQ;
+	cpufreq_generic_init(policy, s5pv210_freq_table, 40000);
+	return 0;
+
+out_dmc1:
+	clk_put(dmc0_clk);
+out_dmc0:
+	clk_put(policy->clk);
+	return ret;
+}
+
+static int s5pv210_cpufreq_reboot_notifier_event(struct notifier_block *this,
+						 unsigned long event, void *ptr)
+{
+	int ret;
+	struct cpufreq_policy *policy;
+
+	policy = cpufreq_cpu_get(0);
+	if (!policy) {
+		pr_debug("cpufreq: get no policy for cpu0\n");
+		return NOTIFY_BAD;
+	}
+
+	ret = cpufreq_driver_target(policy, SLEEP_FREQ, 0);
+	cpufreq_cpu_put(policy);
+
+	if (ret < 0)
+		return NOTIFY_BAD;
+
+	no_cpufreq_access = true;
+	return NOTIFY_DONE;
+}
+
+static struct cpufreq_driver s5pv210_driver = {
+	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= s5pv210_target,
+	.get		= cpufreq_generic_get,
+	.init		= s5pv210_cpu_init,
+	.name		= "s5pv210",
+	.suspend	= cpufreq_generic_suspend,
+	.resume		= cpufreq_generic_suspend, /* We need to set SLEEP FREQ again */
+};
+
+static struct notifier_block s5pv210_cpufreq_reboot_notifier = {
+	.notifier_call = s5pv210_cpufreq_reboot_notifier_event,
+};
+
+static int s5pv210_cpufreq_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np;
+	int id, result = 0;
+
+	/*
+	 * HACK: This is a temporary workaround to get access to clock
+	 * and DMC controller registers directly and remove static mappings
+	 * and dependencies on platform headers. It is necessary to enable
+	 * S5PV210 multi-platform support and will be removed together with
+	 * this whole driver as soon as S5PV210 gets migrated to use
+	 * cpufreq-dt driver.
+	 */
+	arm_regulator = regulator_get(NULL, "vddarm");
+	if (IS_ERR(arm_regulator))
+		return dev_err_probe(dev, PTR_ERR(arm_regulator),
+				     "failed to get regulator vddarm\n");
+
+	int_regulator = regulator_get(NULL, "vddint");
+	if (IS_ERR(int_regulator)) {
+		result = dev_err_probe(dev, PTR_ERR(int_regulator),
+				       "failed to get regulator vddint\n");
+		goto err_int_regulator;
+	}
+
+	np = of_find_compatible_node(NULL, NULL, "samsung,s5pv210-clock");
+	if (!np) {
+		dev_err(dev, "failed to find clock controller DT node\n");
+		result = -ENODEV;
+		goto err_clock;
+	}
+
+	clk_base = of_iomap(np, 0);
+	of_node_put(np);
+	if (!clk_base) {
+		dev_err(dev, "failed to map clock registers\n");
+		result = -EFAULT;
+		goto err_clock;
+	}
+
+	for_each_compatible_node(np, NULL, "samsung,s5pv210-dmc") {
+		id = of_alias_get_id(np, "dmc");
+		if (id < 0 || id >= ARRAY_SIZE(dmc_base)) {
+			dev_err(dev, "failed to get alias of dmc node '%pOFn'\n", np);
+			of_node_put(np);
+			result = id;
+			goto err_clk_base;
+		}
+
+		dmc_base[id] = of_iomap(np, 0);
+		if (!dmc_base[id]) {
+			dev_err(dev, "failed to map dmc%d registers\n", id);
+			of_node_put(np);
+			result = -EFAULT;
+			goto err_dmc;
+		}
+	}
+
+	for (id = 0; id < ARRAY_SIZE(dmc_base); ++id) {
+		if (!dmc_base[id]) {
+			dev_err(dev, "failed to find dmc%d node\n", id);
+			result = -ENODEV;
+			goto err_dmc;
+		}
+	}
+
+	register_reboot_notifier(&s5pv210_cpufreq_reboot_notifier);
+
+	return cpufreq_register_driver(&s5pv210_driver);
+
+err_dmc:
+	for (id = 0; id < ARRAY_SIZE(dmc_base); ++id)
+		if (dmc_base[id]) {
+			iounmap(dmc_base[id]);
+			dmc_base[id] = NULL;
+		}
+
+err_clk_base:
+	iounmap(clk_base);
+
+err_clock:
+	regulator_put(int_regulator);
+
+err_int_regulator:
+	regulator_put(arm_regulator);
+
+	return result;
+}
+
+static struct platform_driver s5pv210_cpufreq_platdrv = {
+	.driver = {
+		.name	= "s5pv210-cpufreq",
+	},
+	.probe = s5pv210_cpufreq_probe,
+};
+builtin_platform_driver(s5pv210_cpufreq_platdrv);