Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 545 insertions, 0 deletions

diff --git a/drivers/crypto/allwinner/sun4i-ss/sun4i-ss-hash.c b/drivers/crypto/allwinner/sun4i-ss/sun4i-ss-hash.c
new file mode 100644
index 000000000..d28292762
--- /dev/null
+++ b/drivers/crypto/allwinner/sun4i-ss/sun4i-ss-hash.c
@@ -0,0 +1,545 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sun4i-ss-hash.c - hardware cryptographic accelerator for Allwinner A20 SoC
+ *
+ * Copyright (C) 2013-2015 Corentin LABBE <clabbe.montjoie@gmail.com>
+ *
+ * This file add support for MD5 and SHA1.
+ *
+ * You could find the datasheet in Documentation/arm/sunxi.rst
+ */
+#include "sun4i-ss.h"
+#include <asm/unaligned.h>
+#include <linux/scatterlist.h>
+
+/* This is a totally arbitrary value */
+#define SS_TIMEOUT 100
+
+int sun4i_hash_crainit(struct crypto_tfm *tfm)
+{
+	struct sun4i_tfm_ctx *op = crypto_tfm_ctx(tfm);
+	struct ahash_alg *alg = __crypto_ahash_alg(tfm->__crt_alg);
+	struct sun4i_ss_alg_template *algt;
+	int err;
+
+	memset(op, 0, sizeof(struct sun4i_tfm_ctx));
+
+	algt = container_of(alg, struct sun4i_ss_alg_template, alg.hash);
+	op->ss = algt->ss;
+
+	err = pm_runtime_resume_and_get(op->ss->dev);
+	if (err < 0)
+		return err;
+
+	crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
+				 sizeof(struct sun4i_req_ctx));
+	return 0;
+}
+
+void sun4i_hash_craexit(struct crypto_tfm *tfm)
+{
+	struct sun4i_tfm_ctx *op = crypto_tfm_ctx(tfm);
+
+	pm_runtime_put(op->ss->dev);
+}
+
+/* sun4i_hash_init: initialize request context */
+int sun4i_hash_init(struct ahash_request *areq)
+{
+	struct sun4i_req_ctx *op = ahash_request_ctx(areq);
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq);
+	struct ahash_alg *alg = __crypto_ahash_alg(tfm->base.__crt_alg);
+	struct sun4i_ss_alg_template *algt;
+
+	memset(op, 0, sizeof(struct sun4i_req_ctx));
+
+	algt = container_of(alg, struct sun4i_ss_alg_template, alg.hash);
+	op->mode = algt->mode;
+
+	return 0;
+}
+
+int sun4i_hash_export_md5(struct ahash_request *areq, void *out)
+{
+	struct sun4i_req_ctx *op = ahash_request_ctx(areq);
+	struct md5_state *octx = out;
+	int i;
+
+	octx->byte_count = op->byte_count + op->len;
+
+	memcpy(octx->block, op->buf, op->len);
+
+	if (op->byte_count) {
+		for (i = 0; i < 4; i++)
+			octx->hash[i] = op->hash[i];
+	} else {
+		octx->hash[0] = SHA1_H0;
+		octx->hash[1] = SHA1_H1;
+		octx->hash[2] = SHA1_H2;
+		octx->hash[3] = SHA1_H3;
+	}
+
+	return 0;
+}
+
+int sun4i_hash_import_md5(struct ahash_request *areq, const void *in)
+{
+	struct sun4i_req_ctx *op = ahash_request_ctx(areq);
+	const struct md5_state *ictx = in;
+	int i;
+
+	sun4i_hash_init(areq);
+
+	op->byte_count = ictx->byte_count & ~0x3F;
+	op->len = ictx->byte_count & 0x3F;
+
+	memcpy(op->buf, ictx->block, op->len);
+
+	for (i = 0; i < 4; i++)
+		op->hash[i] = ictx->hash[i];
+
+	return 0;
+}
+
+int sun4i_hash_export_sha1(struct ahash_request *areq, void *out)
+{
+	struct sun4i_req_ctx *op = ahash_request_ctx(areq);
+	struct sha1_state *octx = out;
+	int i;
+
+	octx->count = op->byte_count + op->len;
+
+	memcpy(octx->buffer, op->buf, op->len);
+
+	if (op->byte_count) {
+		for (i = 0; i < 5; i++)
+			octx->state[i] = op->hash[i];
+	} else {
+		octx->state[0] = SHA1_H0;
+		octx->state[1] = SHA1_H1;
+		octx->state[2] = SHA1_H2;
+		octx->state[3] = SHA1_H3;
+		octx->state[4] = SHA1_H4;
+	}
+
+	return 0;
+}
+
+int sun4i_hash_import_sha1(struct ahash_request *areq, const void *in)
+{
+	struct sun4i_req_ctx *op = ahash_request_ctx(areq);
+	const struct sha1_state *ictx = in;
+	int i;
+
+	sun4i_hash_init(areq);
+
+	op->byte_count = ictx->count & ~0x3F;
+	op->len = ictx->count & 0x3F;
+
+	memcpy(op->buf, ictx->buffer, op->len);
+
+	for (i = 0; i < 5; i++)
+		op->hash[i] = ictx->state[i];
+
+	return 0;
+}
+
+#define SS_HASH_UPDATE 1
+#define SS_HASH_FINAL 2
+
+/*
+ * sun4i_hash_update: update hash engine
+ *
+ * Could be used for both SHA1 and MD5
+ * Write data by step of 32bits and put then in the SS.
+ *
+ * Since we cannot leave partial data and hash state in the engine,
+ * we need to get the hash state at the end of this function.
+ * We can get the hash state every 64 bytes
+ *
+ * So the first work is to get the number of bytes to write to SS modulo 64
+ * The extra bytes will go to a temporary buffer op->buf storing op->len bytes
+ *
+ * So at the begin of update()
+ * if op->len + areq->nbytes < 64
+ * => all data will be written to wait buffer (op->buf) and end=0
+ * if not, write all data from op->buf to the device and position end to
+ * complete to 64bytes
+ *
+ * example 1:
+ * update1 60o => op->len=60
+ * update2 60o => need one more word to have 64 bytes
+ * end=4
+ * so write all data from op->buf and one word of SGs
+ * write remaining data in op->buf
+ * final state op->len=56
+ */
+static int sun4i_hash(struct ahash_request *areq)
+{
+	/*
+	 * i is the total bytes read from SGs, to be compared to areq->nbytes
+	 * i is important because we cannot rely on SG length since the sum of
+	 * SG->length could be greater than areq->nbytes
+	 *
+	 * end is the position when we need to stop writing to the device,
+	 * to be compared to i
+	 *
+	 * in_i: advancement in the current SG
+	 */
+	unsigned int i = 0, end, fill, min_fill, nwait, nbw = 0, j = 0, todo;
+	unsigned int in_i = 0;
+	u32 spaces, rx_cnt = SS_RX_DEFAULT, bf[32] = {0}, v, ivmode = 0;
+	struct sun4i_req_ctx *op = ahash_request_ctx(areq);
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq);
+	struct ahash_alg *alg = __crypto_ahash_alg(tfm->base.__crt_alg);
+	struct sun4i_tfm_ctx *tfmctx = crypto_ahash_ctx(tfm);
+	struct sun4i_ss_ctx *ss = tfmctx->ss;
+	struct sun4i_ss_alg_template *algt;
+	struct scatterlist *in_sg = areq->src;
+	struct sg_mapping_iter mi;
+	int in_r, err = 0;
+	size_t copied = 0;
+	u32 wb = 0;
+
+	dev_dbg(ss->dev, "%s %s bc=%llu len=%u mode=%x wl=%u h0=%0x",
+		__func__, crypto_tfm_alg_name(areq->base.tfm),
+		op->byte_count, areq->nbytes, op->mode,
+		op->len, op->hash[0]);
+
+	if (unlikely(!areq->nbytes) && !(op->flags & SS_HASH_FINAL))
+		return 0;
+
+	/* protect against overflow */
+	if (unlikely(areq->nbytes > UINT_MAX - op->len)) {
+		dev_err(ss->dev, "Cannot process too large request\n");
+		return -EINVAL;
+	}
+
+	if (op->len + areq->nbytes < 64 && !(op->flags & SS_HASH_FINAL)) {
+		/* linearize data to op->buf */
+		copied = sg_pcopy_to_buffer(areq->src, sg_nents(areq->src),
+					    op->buf + op->len, areq->nbytes, 0);
+		op->len += copied;
+		return 0;
+	}
+
+	spin_lock_bh(&ss->slock);
+
+	/*
+	 * if some data have been processed before,
+	 * we need to restore the partial hash state
+	 */
+	if (op->byte_count) {
+		ivmode = SS_IV_ARBITRARY;
+		for (i = 0; i < crypto_ahash_digestsize(tfm) / 4; i++)
+			writel(op->hash[i], ss->base + SS_IV0 + i * 4);
+	}
+	/* Enable the device */
+	writel(op->mode | SS_ENABLED | ivmode, ss->base + SS_CTL);
+
+	if (!(op->flags & SS_HASH_UPDATE))
+		goto hash_final;
+
+	/* start of handling data */
+	if (!(op->flags & SS_HASH_FINAL)) {
+		end = ((areq->nbytes + op->len) / 64) * 64 - op->len;
+
+		if (end > areq->nbytes || areq->nbytes - end > 63) {
+			dev_err(ss->dev, "ERROR: Bound error %u %u\n",
+				end, areq->nbytes);
+			err = -EINVAL;
+			goto release_ss;
+		}
+	} else {
+		/* Since we have the flag final, we can go up to modulo 4 */
+		if (areq->nbytes < 4)
+			end = 0;
+		else
+			end = ((areq->nbytes + op->len) / 4) * 4 - op->len;
+	}
+
+	/* TODO if SGlen % 4 and !op->len then DMA */
+	i = 1;
+	while (in_sg && i == 1) {
+		if (in_sg->length % 4)
+			i = 0;
+		in_sg = sg_next(in_sg);
+	}
+	if (i == 1 && !op->len && areq->nbytes)
+		dev_dbg(ss->dev, "We can DMA\n");
+
+	i = 0;
+	sg_miter_start(&mi, areq->src, sg_nents(areq->src),
+		       SG_MITER_FROM_SG | SG_MITER_ATOMIC);
+	sg_miter_next(&mi);
+	in_i = 0;
+
+	do {
+		/*
+		 * we need to linearize in two case:
+		 * - the buffer is already used
+		 * - the SG does not have enough byte remaining ( < 4)
+		 */
+		if (op->len || (mi.length - in_i) < 4) {
+			/*
+			 * if we have entered here we have two reason to stop
+			 * - the buffer is full
+			 * - reach the end
+			 */
+			while (op->len < 64 && i < end) {
+				/* how many bytes we can read from current SG */
+				in_r = min(end - i, 64 - op->len);
+				in_r = min_t(size_t, mi.length - in_i, in_r);
+				memcpy(op->buf + op->len, mi.addr + in_i, in_r);
+				op->len += in_r;
+				i += in_r;
+				in_i += in_r;
+				if (in_i == mi.length) {
+					sg_miter_next(&mi);
+					in_i = 0;
+				}
+			}
+			if (op->len > 3 && !(op->len % 4)) {
+				/* write buf to the device */
+				writesl(ss->base + SS_RXFIFO, op->buf,
+					op->len / 4);
+				op->byte_count += op->len;
+				op->len = 0;
+			}
+		}
+		if (mi.length - in_i > 3 && i < end) {
+			/* how many bytes we can read from current SG */
+			in_r = min_t(size_t, mi.length - in_i, areq->nbytes - i);
+			in_r = min_t(size_t, ((mi.length - in_i) / 4) * 4, in_r);
+			/* how many bytes we can write in the device*/
+			todo = min3((u32)(end - i) / 4, rx_cnt, (u32)in_r / 4);
+			writesl(ss->base + SS_RXFIFO, mi.addr + in_i, todo);
+			op->byte_count += todo * 4;
+			i += todo * 4;
+			in_i += todo * 4;
+			rx_cnt -= todo;
+			if (!rx_cnt) {
+				spaces = readl(ss->base + SS_FCSR);
+				rx_cnt = SS_RXFIFO_SPACES(spaces);
+			}
+			if (in_i == mi.length) {
+				sg_miter_next(&mi);
+				in_i = 0;
+			}
+		}
+	} while (i < end);
+
+	/*
+	 * Now we have written to the device all that we can,
+	 * store the remaining bytes in op->buf
+	 */
+	if ((areq->nbytes - i) < 64) {
+		while (i < areq->nbytes && in_i < mi.length && op->len < 64) {
+			/* how many bytes we can read from current SG */
+			in_r = min(areq->nbytes - i, 64 - op->len);
+			in_r = min_t(size_t, mi.length - in_i, in_r);
+			memcpy(op->buf + op->len, mi.addr + in_i, in_r);
+			op->len += in_r;
+			i += in_r;
+			in_i += in_r;
+			if (in_i == mi.length) {
+				sg_miter_next(&mi);
+				in_i = 0;
+			}
+		}
+	}
+
+	sg_miter_stop(&mi);
+
+	/*
+	 * End of data process
+	 * Now if we have the flag final go to finalize part
+	 * If not, store the partial hash
+	 */
+	if (op->flags & SS_HASH_FINAL)
+		goto hash_final;
+
+	writel(op->mode | SS_ENABLED | SS_DATA_END, ss->base + SS_CTL);
+	i = 0;
+	do {
+		v = readl(ss->base + SS_CTL);
+		i++;
+	} while (i < SS_TIMEOUT && (v & SS_DATA_END));
+	if (unlikely(i >= SS_TIMEOUT)) {
+		dev_err_ratelimited(ss->dev,
+				    "ERROR: hash end timeout %d>%d ctl=%x len=%u\n",
+				    i, SS_TIMEOUT, v, areq->nbytes);
+		err = -EIO;
+		goto release_ss;
+	}
+
+	/*
+	 * The datasheet isn't very clear about when to retrieve the digest. The
+	 * bit SS_DATA_END is cleared when the engine has processed the data and
+	 * when the digest is computed *but* it doesn't mean the digest is
+	 * available in the digest registers. Hence the delay to be sure we can
+	 * read it.
+	 */
+	ndelay(1);
+
+	for (i = 0; i < crypto_ahash_digestsize(tfm) / 4; i++)
+		op->hash[i] = readl(ss->base + SS_MD0 + i * 4);
+
+	goto release_ss;
+
+/*
+ * hash_final: finalize hashing operation
+ *
+ * If we have some remaining bytes, we write them.
+ * Then ask the SS for finalizing the hashing operation
+ *
+ * I do not check RX FIFO size in this function since the size is 32
+ * after each enabling and this function neither write more than 32 words.
+ * If we come from the update part, we cannot have more than
+ * 3 remaining bytes to write and SS is fast enough to not care about it.
+ */
+
+hash_final:
+	if (IS_ENABLED(CONFIG_CRYPTO_DEV_SUN4I_SS_DEBUG)) {
+		algt = container_of(alg, struct sun4i_ss_alg_template, alg.hash);
+		algt->stat_req++;
+	}
+
+	/* write the remaining words of the wait buffer */
+	if (op->len) {
+		nwait = op->len / 4;
+		if (nwait) {
+			writesl(ss->base + SS_RXFIFO, op->buf, nwait);
+			op->byte_count += 4 * nwait;
+		}
+
+		nbw = op->len - 4 * nwait;
+		if (nbw) {
+			wb = le32_to_cpup((__le32 *)(op->buf + nwait * 4));
+			wb &= GENMASK((nbw * 8) - 1, 0);
+
+			op->byte_count += nbw;
+		}
+	}
+
+	/* write the remaining bytes of the nbw buffer */
+	wb |= ((1 << 7) << (nbw * 8));
+	((__le32 *)bf)[j++] = cpu_to_le32(wb);
+
+	/*
+	 * number of space to pad to obtain 64o minus 8(size) minus 4 (final 1)
+	 * I take the operations from other MD5/SHA1 implementations
+	 */
+
+	/* last block size */
+	fill = 64 - (op->byte_count % 64);
+	min_fill = 2 * sizeof(u32) + (nbw ? 0 : sizeof(u32));
+
+	/* if we can't fill all data, jump to the next 64 block */
+	if (fill < min_fill)
+		fill += 64;
+
+	j += (fill - min_fill) / sizeof(u32);
+
+	/* write the length of data */
+	if (op->mode == SS_OP_SHA1) {
+		__be64 *bits = (__be64 *)&bf[j];
+		*bits = cpu_to_be64(op->byte_count << 3);
+		j += 2;
+	} else {
+		__le64 *bits = (__le64 *)&bf[j];
+		*bits = cpu_to_le64(op->byte_count << 3);
+		j += 2;
+	}
+	writesl(ss->base + SS_RXFIFO, bf, j);
+
+	/* Tell the SS to stop the hashing */
+	writel(op->mode | SS_ENABLED | SS_DATA_END, ss->base + SS_CTL);
+
+	/*
+	 * Wait for SS to finish the hash.
+	 * The timeout could happen only in case of bad overclocking
+	 * or driver bug.
+	 */
+	i = 0;
+	do {
+		v = readl(ss->base + SS_CTL);
+		i++;
+	} while (i < SS_TIMEOUT && (v & SS_DATA_END));
+	if (unlikely(i >= SS_TIMEOUT)) {
+		dev_err_ratelimited(ss->dev,
+				    "ERROR: hash end timeout %d>%d ctl=%x len=%u\n",
+				    i, SS_TIMEOUT, v, areq->nbytes);
+		err = -EIO;
+		goto release_ss;
+	}
+
+	/*
+	 * The datasheet isn't very clear about when to retrieve the digest. The
+	 * bit SS_DATA_END is cleared when the engine has processed the data and
+	 * when the digest is computed *but* it doesn't mean the digest is
+	 * available in the digest registers. Hence the delay to be sure we can
+	 * read it.
+	 */
+	ndelay(1);
+
+	/* Get the hash from the device */
+	if (op->mode == SS_OP_SHA1) {
+		for (i = 0; i < 5; i++) {
+			v = readl(ss->base + SS_MD0 + i * 4);
+			if (ss->variant->sha1_in_be)
+				put_unaligned_le32(v, areq->result + i * 4);
+			else
+				put_unaligned_be32(v, areq->result + i * 4);
+		}
+	} else {
+		for (i = 0; i < 4; i++) {
+			v = readl(ss->base + SS_MD0 + i * 4);
+			put_unaligned_le32(v, areq->result + i * 4);
+		}
+	}
+
+release_ss:
+	writel(0, ss->base + SS_CTL);
+	spin_unlock_bh(&ss->slock);
+	return err;
+}
+
+int sun4i_hash_final(struct ahash_request *areq)
+{
+	struct sun4i_req_ctx *op = ahash_request_ctx(areq);
+
+	op->flags = SS_HASH_FINAL;
+	return sun4i_hash(areq);
+}
+
+int sun4i_hash_update(struct ahash_request *areq)
+{
+	struct sun4i_req_ctx *op = ahash_request_ctx(areq);
+
+	op->flags = SS_HASH_UPDATE;
+	return sun4i_hash(areq);
+}
+
+/* sun4i_hash_finup: finalize hashing operation after an update */
+int sun4i_hash_finup(struct ahash_request *areq)
+{
+	struct sun4i_req_ctx *op = ahash_request_ctx(areq);
+
+	op->flags = SS_HASH_UPDATE | SS_HASH_FINAL;
+	return sun4i_hash(areq);
+}
+
+/* combo of init/update/final functions */
+int sun4i_hash_digest(struct ahash_request *areq)
+{
+	int err;
+	struct sun4i_req_ctx *op = ahash_request_ctx(areq);
+
+	err = sun4i_hash_init(areq);
+	if (err)
+		return err;
+
+	op->flags = SS_HASH_UPDATE | SS_HASH_FINAL;
+	return sun4i_hash(areq);
+}