Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 530 insertions, 0 deletions

diff --git a/drivers/crypto/bcm/util.c b/drivers/crypto/bcm/util.c
new file mode 100644
index 000000000..d5d9cabea
--- /dev/null
+++ b/drivers/crypto/bcm/util.c
@@ -0,0 +1,530 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2016 Broadcom
+ */
+
+#include <linux/debugfs.h>
+
+#include "cipher.h"
+#include "util.h"
+
+/* offset of SPU_OFIFO_CTRL register */
+#define SPU_OFIFO_CTRL      0x40
+#define SPU_FIFO_WATERMARK  0x1FF
+
+/**
+ * spu_sg_at_offset() - Find the scatterlist entry at a given distance from the
+ * start of a scatterlist.
+ * @sg:         [in]  Start of a scatterlist
+ * @skip:       [in]  Distance from the start of the scatterlist, in bytes
+ * @sge:        [out] Scatterlist entry at skip bytes from start
+ * @sge_offset: [out] Number of bytes from start of sge buffer to get to
+ *                    requested distance.
+ *
+ * Return: 0 if entry found at requested distance
+ *         < 0 otherwise
+ */
+int spu_sg_at_offset(struct scatterlist *sg, unsigned int skip,
+		     struct scatterlist **sge, unsigned int *sge_offset)
+{
+	/* byte index from start of sg to the end of the previous entry */
+	unsigned int index = 0;
+	/* byte index from start of sg to the end of the current entry */
+	unsigned int next_index;
+
+	next_index = sg->length;
+	while (next_index <= skip) {
+		sg = sg_next(sg);
+		index = next_index;
+		if (!sg)
+			return -EINVAL;
+		next_index += sg->length;
+	}
+
+	*sge_offset = skip - index;
+	*sge = sg;
+	return 0;
+}
+
+/* Copy len bytes of sg data, starting at offset skip, to a dest buffer */
+void sg_copy_part_to_buf(struct scatterlist *src, u8 *dest,
+			 unsigned int len, unsigned int skip)
+{
+	size_t copied;
+	unsigned int nents = sg_nents(src);
+
+	copied = sg_pcopy_to_buffer(src, nents, dest, len, skip);
+	if (copied != len) {
+		flow_log("%s copied %u bytes of %u requested. ",
+			 __func__, (u32)copied, len);
+		flow_log("sg with %u entries and skip %u\n", nents, skip);
+	}
+}
+
+/*
+ * Copy data into a scatterlist starting at a specified offset in the
+ * scatterlist. Specifically, copy len bytes of data in the buffer src
+ * into the scatterlist dest, starting skip bytes into the scatterlist.
+ */
+void sg_copy_part_from_buf(struct scatterlist *dest, u8 *src,
+			   unsigned int len, unsigned int skip)
+{
+	size_t copied;
+	unsigned int nents = sg_nents(dest);
+
+	copied = sg_pcopy_from_buffer(dest, nents, src, len, skip);
+	if (copied != len) {
+		flow_log("%s copied %u bytes of %u requested. ",
+			 __func__, (u32)copied, len);
+		flow_log("sg with %u entries and skip %u\n", nents, skip);
+	}
+}
+
+/**
+ * spu_sg_count() - Determine number of elements in scatterlist to provide a
+ * specified number of bytes.
+ * @sg_list:  scatterlist to examine
+ * @skip:     index of starting point
+ * @nbytes:   consider elements of scatterlist until reaching this number of
+ *	      bytes
+ *
+ * Return: the number of sg entries contributing to nbytes of data
+ */
+int spu_sg_count(struct scatterlist *sg_list, unsigned int skip, int nbytes)
+{
+	struct scatterlist *sg;
+	int sg_nents = 0;
+	unsigned int offset;
+
+	if (!sg_list)
+		return 0;
+
+	if (spu_sg_at_offset(sg_list, skip, &sg, &offset) < 0)
+		return 0;
+
+	while (sg && (nbytes > 0)) {
+		sg_nents++;
+		nbytes -= (sg->length - offset);
+		offset = 0;
+		sg = sg_next(sg);
+	}
+	return sg_nents;
+}
+
+/**
+ * spu_msg_sg_add() - Copy scatterlist entries from one sg to another, up to a
+ * given length.
+ * @to_sg:       scatterlist to copy to
+ * @from_sg:     scatterlist to copy from
+ * @from_skip:   number of bytes to skip in from_sg. Non-zero when previous
+ *		 request included part of the buffer in entry in from_sg.
+ *		 Assumes from_skip < from_sg->length.
+ * @from_nents:  number of entries in from_sg
+ * @length:      number of bytes to copy. may reach this limit before exhausting
+ *		 from_sg.
+ *
+ * Copies the entries themselves, not the data in the entries. Assumes to_sg has
+ * enough entries. Does not limit the size of an individual buffer in to_sg.
+ *
+ * to_sg, from_sg, skip are all updated to end of copy
+ *
+ * Return: Number of bytes copied
+ */
+u32 spu_msg_sg_add(struct scatterlist **to_sg,
+		   struct scatterlist **from_sg, u32 *from_skip,
+		   u8 from_nents, u32 length)
+{
+	struct scatterlist *sg;	/* an entry in from_sg */
+	struct scatterlist *to = *to_sg;
+	struct scatterlist *from = *from_sg;
+	u32 skip = *from_skip;
+	u32 offset;
+	int i;
+	u32 entry_len = 0;
+	u32 frag_len = 0;	/* length of entry added to to_sg */
+	u32 copied = 0;		/* number of bytes copied so far */
+
+	if (length == 0)
+		return 0;
+
+	for_each_sg(from, sg, from_nents, i) {
+		/* number of bytes in this from entry not yet used */
+		entry_len = sg->length - skip;
+		frag_len = min(entry_len, length - copied);
+		offset = sg->offset + skip;
+		if (frag_len)
+			sg_set_page(to++, sg_page(sg), frag_len, offset);
+		copied += frag_len;
+		if (copied == entry_len) {
+			/* used up all of from entry */
+			skip = 0;	/* start at beginning of next entry */
+		}
+		if (copied == length)
+			break;
+	}
+	*to_sg = to;
+	*from_sg = sg;
+	if (frag_len < entry_len)
+		*from_skip = skip + frag_len;
+	else
+		*from_skip = 0;
+
+	return copied;
+}
+
+void add_to_ctr(u8 *ctr_pos, unsigned int increment)
+{
+	__be64 *high_be = (__be64 *)ctr_pos;
+	__be64 *low_be = high_be + 1;
+	u64 orig_low = __be64_to_cpu(*low_be);
+	u64 new_low = orig_low + (u64)increment;
+
+	*low_be = __cpu_to_be64(new_low);
+	if (new_low < orig_low)
+		/* there was a carry from the low 8 bytes */
+		*high_be = __cpu_to_be64(__be64_to_cpu(*high_be) + 1);
+}
+
+struct sdesc {
+	struct shash_desc shash;
+	char ctx[];
+};
+
+/**
+ * do_shash() - Do a synchronous hash operation in software
+ * @name:       The name of the hash algorithm
+ * @result:     Buffer where digest is to be written
+ * @data1:      First part of data to hash. May be NULL.
+ * @data1_len:  Length of data1, in bytes
+ * @data2:      Second part of data to hash. May be NULL.
+ * @data2_len:  Length of data2, in bytes
+ * @key:	Key (if keyed hash)
+ * @key_len:	Length of key, in bytes (or 0 if non-keyed hash)
+ *
+ * Note that the crypto API will not select this driver's own transform because
+ * this driver only registers asynchronous algos.
+ *
+ * Return: 0 if hash successfully stored in result
+ *         < 0 otherwise
+ */
+int do_shash(unsigned char *name, unsigned char *result,
+	     const u8 *data1, unsigned int data1_len,
+	     const u8 *data2, unsigned int data2_len,
+	     const u8 *key, unsigned int key_len)
+{
+	int rc;
+	unsigned int size;
+	struct crypto_shash *hash;
+	struct sdesc *sdesc;
+
+	hash = crypto_alloc_shash(name, 0, 0);
+	if (IS_ERR(hash)) {
+		rc = PTR_ERR(hash);
+		pr_err("%s: Crypto %s allocation error %d\n", __func__, name, rc);
+		return rc;
+	}
+
+	size = sizeof(struct shash_desc) + crypto_shash_descsize(hash);
+	sdesc = kmalloc(size, GFP_KERNEL);
+	if (!sdesc) {
+		rc = -ENOMEM;
+		goto do_shash_err;
+	}
+	sdesc->shash.tfm = hash;
+
+	if (key_len > 0) {
+		rc = crypto_shash_setkey(hash, key, key_len);
+		if (rc) {
+			pr_err("%s: Could not setkey %s shash\n", __func__, name);
+			goto do_shash_err;
+		}
+	}
+
+	rc = crypto_shash_init(&sdesc->shash);
+	if (rc) {
+		pr_err("%s: Could not init %s shash\n", __func__, name);
+		goto do_shash_err;
+	}
+	rc = crypto_shash_update(&sdesc->shash, data1, data1_len);
+	if (rc) {
+		pr_err("%s: Could not update1\n", __func__);
+		goto do_shash_err;
+	}
+	if (data2 && data2_len) {
+		rc = crypto_shash_update(&sdesc->shash, data2, data2_len);
+		if (rc) {
+			pr_err("%s: Could not update2\n", __func__);
+			goto do_shash_err;
+		}
+	}
+	rc = crypto_shash_final(&sdesc->shash, result);
+	if (rc)
+		pr_err("%s: Could not generate %s hash\n", __func__, name);
+
+do_shash_err:
+	crypto_free_shash(hash);
+	kfree(sdesc);
+
+	return rc;
+}
+
+#ifdef DEBUG
+/* Dump len bytes of a scatterlist starting at skip bytes into the sg */
+void __dump_sg(struct scatterlist *sg, unsigned int skip, unsigned int len)
+{
+	u8 dbuf[16];
+	unsigned int idx = skip;
+	unsigned int num_out = 0;	/* number of bytes dumped so far */
+	unsigned int count;
+
+	if (packet_debug_logging) {
+		while (num_out < len) {
+			count = (len - num_out > 16) ? 16 : len - num_out;
+			sg_copy_part_to_buf(sg, dbuf, count, idx);
+			num_out += count;
+			print_hex_dump(KERN_ALERT, "  sg: ", DUMP_PREFIX_NONE,
+				       4, 1, dbuf, count, false);
+			idx += 16;
+		}
+	}
+	if (debug_logging_sleep)
+		msleep(debug_logging_sleep);
+}
+#endif
+
+/* Returns the name for a given cipher alg/mode */
+char *spu_alg_name(enum spu_cipher_alg alg, enum spu_cipher_mode mode)
+{
+	switch (alg) {
+	case CIPHER_ALG_RC4:
+		return "rc4";
+	case CIPHER_ALG_AES:
+		switch (mode) {
+		case CIPHER_MODE_CBC:
+			return "cbc(aes)";
+		case CIPHER_MODE_ECB:
+			return "ecb(aes)";
+		case CIPHER_MODE_OFB:
+			return "ofb(aes)";
+		case CIPHER_MODE_CFB:
+			return "cfb(aes)";
+		case CIPHER_MODE_CTR:
+			return "ctr(aes)";
+		case CIPHER_MODE_XTS:
+			return "xts(aes)";
+		case CIPHER_MODE_GCM:
+			return "gcm(aes)";
+		default:
+			return "aes";
+		}
+		break;
+	case CIPHER_ALG_DES:
+		switch (mode) {
+		case CIPHER_MODE_CBC:
+			return "cbc(des)";
+		case CIPHER_MODE_ECB:
+			return "ecb(des)";
+		case CIPHER_MODE_CTR:
+			return "ctr(des)";
+		default:
+			return "des";
+		}
+		break;
+	case CIPHER_ALG_3DES:
+		switch (mode) {
+		case CIPHER_MODE_CBC:
+			return "cbc(des3_ede)";
+		case CIPHER_MODE_ECB:
+			return "ecb(des3_ede)";
+		case CIPHER_MODE_CTR:
+			return "ctr(des3_ede)";
+		default:
+			return "3des";
+		}
+		break;
+	default:
+		return "other";
+	}
+}
+
+static ssize_t spu_debugfs_read(struct file *filp, char __user *ubuf,
+				size_t count, loff_t *offp)
+{
+	struct bcm_device_private *ipriv;
+	char *buf;
+	ssize_t ret, out_offset, out_count;
+	int i;
+	u32 fifo_len;
+	u32 spu_ofifo_ctrl;
+	u32 alg;
+	u32 mode;
+	u32 op_cnt;
+
+	out_count = 2048;
+
+	buf = kmalloc(out_count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ipriv = filp->private_data;
+	out_offset = 0;
+	out_offset += scnprintf(buf + out_offset, out_count - out_offset,
+			       "Number of SPUs.........%u\n",
+			       ipriv->spu.num_spu);
+	out_offset += scnprintf(buf + out_offset, out_count - out_offset,
+			       "Current sessions.......%u\n",
+			       atomic_read(&ipriv->session_count));
+	out_offset += scnprintf(buf + out_offset, out_count - out_offset,
+			       "Session count..........%u\n",
+			       atomic_read(&ipriv->stream_count));
+	out_offset += scnprintf(buf + out_offset, out_count - out_offset,
+			       "Cipher setkey..........%u\n",
+			       atomic_read(&ipriv->setkey_cnt[SPU_OP_CIPHER]));
+	out_offset += scnprintf(buf + out_offset, out_count - out_offset,
+			       "Cipher Ops.............%u\n",
+			       atomic_read(&ipriv->op_counts[SPU_OP_CIPHER]));
+	for (alg = 0; alg < CIPHER_ALG_LAST; alg++) {
+		for (mode = 0; mode < CIPHER_MODE_LAST; mode++) {
+			op_cnt = atomic_read(&ipriv->cipher_cnt[alg][mode]);
+			if (op_cnt) {
+				out_offset += scnprintf(buf + out_offset,
+						       out_count - out_offset,
+			       "  %-13s%11u\n",
+			       spu_alg_name(alg, mode), op_cnt);
+			}
+		}
+	}
+	out_offset += scnprintf(buf + out_offset, out_count - out_offset,
+			       "Hash Ops...............%u\n",
+			       atomic_read(&ipriv->op_counts[SPU_OP_HASH]));
+	for (alg = 0; alg < HASH_ALG_LAST; alg++) {
+		op_cnt = atomic_read(&ipriv->hash_cnt[alg]);
+		if (op_cnt) {
+			out_offset += scnprintf(buf + out_offset,
+					       out_count - out_offset,
+		       "  %-13s%11u\n",
+		       hash_alg_name[alg], op_cnt);
+		}
+	}
+	out_offset += scnprintf(buf + out_offset, out_count - out_offset,
+			       "HMAC setkey............%u\n",
+			       atomic_read(&ipriv->setkey_cnt[SPU_OP_HMAC]));
+	out_offset += scnprintf(buf + out_offset, out_count - out_offset,
+			       "HMAC Ops...............%u\n",
+			       atomic_read(&ipriv->op_counts[SPU_OP_HMAC]));
+	for (alg = 0; alg < HASH_ALG_LAST; alg++) {
+		op_cnt = atomic_read(&ipriv->hmac_cnt[alg]);
+		if (op_cnt) {
+			out_offset += scnprintf(buf + out_offset,
+					       out_count - out_offset,
+		       "  %-13s%11u\n",
+		       hash_alg_name[alg], op_cnt);
+		}
+	}
+	out_offset += scnprintf(buf + out_offset, out_count - out_offset,
+			       "AEAD setkey............%u\n",
+			       atomic_read(&ipriv->setkey_cnt[SPU_OP_AEAD]));
+
+	out_offset += scnprintf(buf + out_offset, out_count - out_offset,
+			       "AEAD Ops...............%u\n",
+			       atomic_read(&ipriv->op_counts[SPU_OP_AEAD]));
+	for (alg = 0; alg < AEAD_TYPE_LAST; alg++) {
+		op_cnt = atomic_read(&ipriv->aead_cnt[alg]);
+		if (op_cnt) {
+			out_offset += scnprintf(buf + out_offset,
+					       out_count - out_offset,
+		       "  %-13s%11u\n",
+		       aead_alg_name[alg], op_cnt);
+		}
+	}
+	out_offset += scnprintf(buf + out_offset, out_count - out_offset,
+			       "Bytes of req data......%llu\n",
+			       (u64)atomic64_read(&ipriv->bytes_out));
+	out_offset += scnprintf(buf + out_offset, out_count - out_offset,
+			       "Bytes of resp data.....%llu\n",
+			       (u64)atomic64_read(&ipriv->bytes_in));
+	out_offset += scnprintf(buf + out_offset, out_count - out_offset,
+			       "Mailbox full...........%u\n",
+			       atomic_read(&ipriv->mb_no_spc));
+	out_offset += scnprintf(buf + out_offset, out_count - out_offset,
+			       "Mailbox send failures..%u\n",
+			       atomic_read(&ipriv->mb_send_fail));
+	out_offset += scnprintf(buf + out_offset, out_count - out_offset,
+			       "Check ICV errors.......%u\n",
+			       atomic_read(&ipriv->bad_icv));
+	if (ipriv->spu.spu_type == SPU_TYPE_SPUM)
+		for (i = 0; i < ipriv->spu.num_spu; i++) {
+			spu_ofifo_ctrl = ioread32(ipriv->spu.reg_vbase[i] +
+						  SPU_OFIFO_CTRL);
+			fifo_len = spu_ofifo_ctrl & SPU_FIFO_WATERMARK;
+			out_offset += scnprintf(buf + out_offset,
+					       out_count - out_offset,
+				       "SPU %d output FIFO high water.....%u\n",
+				       i, fifo_len);
+		}
+
+	if (out_offset > out_count)
+		out_offset = out_count;
+
+	ret = simple_read_from_buffer(ubuf, count, offp, buf, out_offset);
+	kfree(buf);
+	return ret;
+}
+
+static const struct file_operations spu_debugfs_stats = {
+	.owner = THIS_MODULE,
+	.open = simple_open,
+	.read = spu_debugfs_read,
+};
+
+/*
+ * Create the debug FS directories. If the top-level directory has not yet
+ * been created, create it now. Create a stats file in this directory for
+ * a SPU.
+ */
+void spu_setup_debugfs(void)
+{
+	if (!debugfs_initialized())
+		return;
+
+	if (!iproc_priv.debugfs_dir)
+		iproc_priv.debugfs_dir = debugfs_create_dir(KBUILD_MODNAME,
+							    NULL);
+
+	if (!iproc_priv.debugfs_stats)
+		/* Create file with permissions S_IRUSR */
+		debugfs_create_file("stats", 0400, iproc_priv.debugfs_dir,
+				    &iproc_priv, &spu_debugfs_stats);
+}
+
+void spu_free_debugfs(void)
+{
+	debugfs_remove_recursive(iproc_priv.debugfs_dir);
+	iproc_priv.debugfs_dir = NULL;
+}
+
+/**
+ * format_value_ccm() - Format a value into a buffer, using a specified number
+ *			of bytes (i.e. maybe writing value X into a 4 byte
+ *			buffer, or maybe into a 12 byte buffer), as per the
+ *			SPU CCM spec.
+ *
+ * @val:		value to write (up to max of unsigned int)
+ * @buf:		(pointer to) buffer to write the value
+ * @len:		number of bytes to use (0 to 255)
+ *
+ */
+void format_value_ccm(unsigned int val, u8 *buf, u8 len)
+{
+	int i;
+
+	/* First clear full output buffer */
+	memset(buf, 0, len);
+
+	/* Then, starting from right side, fill in with data */
+	for (i = 0; i < len; i++) {
+		buf[len - i - 1] = (val >> (8 * i)) & 0xff;
+		if (i >= 3)
+			break;  /* Only handle up to 32 bits of 'val' */
+	}
+}