Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 670 insertions, 0 deletions

diff --git a/drivers/crypto/ccp/ccp-dev.c b/drivers/crypto/ccp/ccp-dev.c
new file mode 100644
index 000000000..c531d13d9
--- /dev/null
+++ b/drivers/crypto/ccp/ccp-dev.c
@@ -0,0 +1,670 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AMD Cryptographic Coprocessor (CCP) driver
+ *
+ * Copyright (C) 2013,2019 Advanced Micro Devices, Inc.
+ *
+ * Author: Tom Lendacky <thomas.lendacky@amd.com>
+ * Author: Gary R Hook <gary.hook@amd.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/spinlock_types.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/hw_random.h>
+#include <linux/cpu.h>
+#include <linux/atomic.h>
+#ifdef CONFIG_X86
+#include <asm/cpu_device_id.h>
+#endif
+#include <linux/ccp.h>
+
+#include "ccp-dev.h"
+
+#define MAX_CCPS 32
+
+/* Limit CCP use to a specifed number of queues per device */
+static unsigned int nqueues;
+module_param(nqueues, uint, 0444);
+MODULE_PARM_DESC(nqueues, "Number of queues per CCP (minimum 1; default: all available)");
+
+/* Limit the maximum number of configured CCPs */
+static atomic_t dev_count = ATOMIC_INIT(0);
+static unsigned int max_devs = MAX_CCPS;
+module_param(max_devs, uint, 0444);
+MODULE_PARM_DESC(max_devs, "Maximum number of CCPs to enable (default: all; 0 disables all CCPs)");
+
+struct ccp_tasklet_data {
+	struct completion completion;
+	struct ccp_cmd *cmd;
+};
+
+/* Human-readable error strings */
+#define CCP_MAX_ERROR_CODE	64
+static char *ccp_error_codes[] = {
+	"",
+	"ILLEGAL_ENGINE",
+	"ILLEGAL_KEY_ID",
+	"ILLEGAL_FUNCTION_TYPE",
+	"ILLEGAL_FUNCTION_MODE",
+	"ILLEGAL_FUNCTION_ENCRYPT",
+	"ILLEGAL_FUNCTION_SIZE",
+	"Zlib_MISSING_INIT_EOM",
+	"ILLEGAL_FUNCTION_RSVD",
+	"ILLEGAL_BUFFER_LENGTH",
+	"VLSB_FAULT",
+	"ILLEGAL_MEM_ADDR",
+	"ILLEGAL_MEM_SEL",
+	"ILLEGAL_CONTEXT_ID",
+	"ILLEGAL_KEY_ADDR",
+	"0xF Reserved",
+	"Zlib_ILLEGAL_MULTI_QUEUE",
+	"Zlib_ILLEGAL_JOBID_CHANGE",
+	"CMD_TIMEOUT",
+	"IDMA0_AXI_SLVERR",
+	"IDMA0_AXI_DECERR",
+	"0x15 Reserved",
+	"IDMA1_AXI_SLAVE_FAULT",
+	"IDMA1_AIXI_DECERR",
+	"0x18 Reserved",
+	"ZLIBVHB_AXI_SLVERR",
+	"ZLIBVHB_AXI_DECERR",
+	"0x1B Reserved",
+	"ZLIB_UNEXPECTED_EOM",
+	"ZLIB_EXTRA_DATA",
+	"ZLIB_BTYPE",
+	"ZLIB_UNDEFINED_SYMBOL",
+	"ZLIB_UNDEFINED_DISTANCE_S",
+	"ZLIB_CODE_LENGTH_SYMBOL",
+	"ZLIB _VHB_ILLEGAL_FETCH",
+	"ZLIB_UNCOMPRESSED_LEN",
+	"ZLIB_LIMIT_REACHED",
+	"ZLIB_CHECKSUM_MISMATCH0",
+	"ODMA0_AXI_SLVERR",
+	"ODMA0_AXI_DECERR",
+	"0x28 Reserved",
+	"ODMA1_AXI_SLVERR",
+	"ODMA1_AXI_DECERR",
+};
+
+void ccp_log_error(struct ccp_device *d, unsigned int e)
+{
+	if (WARN_ON(e >= CCP_MAX_ERROR_CODE))
+		return;
+
+	if (e < ARRAY_SIZE(ccp_error_codes))
+		dev_err(d->dev, "CCP error %d: %s\n", e, ccp_error_codes[e]);
+	else
+		dev_err(d->dev, "CCP error %d: Unknown Error\n", e);
+}
+
+/* List of CCPs, CCP count, read-write access lock, and access functions
+ *
+ * Lock structure: get ccp_unit_lock for reading whenever we need to
+ * examine the CCP list. While holding it for reading we can acquire
+ * the RR lock to update the round-robin next-CCP pointer. The unit lock
+ * must be acquired before the RR lock.
+ *
+ * If the unit-lock is acquired for writing, we have total control over
+ * the list, so there's no value in getting the RR lock.
+ */
+static DEFINE_RWLOCK(ccp_unit_lock);
+static LIST_HEAD(ccp_units);
+
+/* Round-robin counter */
+static DEFINE_SPINLOCK(ccp_rr_lock);
+static struct ccp_device *ccp_rr;
+
+/**
+ * ccp_add_device - add a CCP device to the list
+ *
+ * @ccp: ccp_device struct pointer
+ *
+ * Put this CCP on the unit list, which makes it available
+ * for use.
+ *
+ * Returns zero if a CCP device is present, -ENODEV otherwise.
+ */
+void ccp_add_device(struct ccp_device *ccp)
+{
+	unsigned long flags;
+
+	write_lock_irqsave(&ccp_unit_lock, flags);
+	list_add_tail(&ccp->entry, &ccp_units);
+	if (!ccp_rr)
+		/* We already have the list lock (we're first) so this
+		 * pointer can't change on us. Set its initial value.
+		 */
+		ccp_rr = ccp;
+	write_unlock_irqrestore(&ccp_unit_lock, flags);
+}
+
+/**
+ * ccp_del_device - remove a CCP device from the list
+ *
+ * @ccp: ccp_device struct pointer
+ *
+ * Remove this unit from the list of devices. If the next device
+ * up for use is this one, adjust the pointer. If this is the last
+ * device, NULL the pointer.
+ */
+void ccp_del_device(struct ccp_device *ccp)
+{
+	unsigned long flags;
+
+	write_lock_irqsave(&ccp_unit_lock, flags);
+	if (ccp_rr == ccp) {
+		/* ccp_unit_lock is read/write; any read access
+		 * will be suspended while we make changes to the
+		 * list and RR pointer.
+		 */
+		if (list_is_last(&ccp_rr->entry, &ccp_units))
+			ccp_rr = list_first_entry(&ccp_units, struct ccp_device,
+						  entry);
+		else
+			ccp_rr = list_next_entry(ccp_rr, entry);
+	}
+	list_del(&ccp->entry);
+	if (list_empty(&ccp_units))
+		ccp_rr = NULL;
+	write_unlock_irqrestore(&ccp_unit_lock, flags);
+}
+
+
+
+int ccp_register_rng(struct ccp_device *ccp)
+{
+	int ret = 0;
+
+	dev_dbg(ccp->dev, "Registering RNG...\n");
+	/* Register an RNG */
+	ccp->hwrng.name = ccp->rngname;
+	ccp->hwrng.read = ccp_trng_read;
+	ret = hwrng_register(&ccp->hwrng);
+	if (ret)
+		dev_err(ccp->dev, "error registering hwrng (%d)\n", ret);
+
+	return ret;
+}
+
+void ccp_unregister_rng(struct ccp_device *ccp)
+{
+	if (ccp->hwrng.name)
+		hwrng_unregister(&ccp->hwrng);
+}
+
+static struct ccp_device *ccp_get_device(void)
+{
+	unsigned long flags;
+	struct ccp_device *dp = NULL;
+
+	/* We round-robin through the unit list.
+	 * The (ccp_rr) pointer refers to the next unit to use.
+	 */
+	read_lock_irqsave(&ccp_unit_lock, flags);
+	if (!list_empty(&ccp_units)) {
+		spin_lock(&ccp_rr_lock);
+		dp = ccp_rr;
+		if (list_is_last(&ccp_rr->entry, &ccp_units))
+			ccp_rr = list_first_entry(&ccp_units, struct ccp_device,
+						  entry);
+		else
+			ccp_rr = list_next_entry(ccp_rr, entry);
+		spin_unlock(&ccp_rr_lock);
+	}
+	read_unlock_irqrestore(&ccp_unit_lock, flags);
+
+	return dp;
+}
+
+/**
+ * ccp_present - check if a CCP device is present
+ *
+ * Returns zero if a CCP device is present, -ENODEV otherwise.
+ */
+int ccp_present(void)
+{
+	unsigned long flags;
+	int ret;
+
+	read_lock_irqsave(&ccp_unit_lock, flags);
+	ret = list_empty(&ccp_units);
+	read_unlock_irqrestore(&ccp_unit_lock, flags);
+
+	return ret ? -ENODEV : 0;
+}
+EXPORT_SYMBOL_GPL(ccp_present);
+
+/**
+ * ccp_version - get the version of the CCP device
+ *
+ * Returns the version from the first unit on the list;
+ * otherwise a zero if no CCP device is present
+ */
+unsigned int ccp_version(void)
+{
+	struct ccp_device *dp;
+	unsigned long flags;
+	int ret = 0;
+
+	read_lock_irqsave(&ccp_unit_lock, flags);
+	if (!list_empty(&ccp_units)) {
+		dp = list_first_entry(&ccp_units, struct ccp_device, entry);
+		ret = dp->vdata->version;
+	}
+	read_unlock_irqrestore(&ccp_unit_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ccp_version);
+
+/**
+ * ccp_enqueue_cmd - queue an operation for processing by the CCP
+ *
+ * @cmd: ccp_cmd struct to be processed
+ *
+ * Queue a cmd to be processed by the CCP. If queueing the cmd
+ * would exceed the defined length of the cmd queue the cmd will
+ * only be queued if the CCP_CMD_MAY_BACKLOG flag is set and will
+ * result in a return code of -EBUSY.
+ *
+ * The callback routine specified in the ccp_cmd struct will be
+ * called to notify the caller of completion (if the cmd was not
+ * backlogged) or advancement out of the backlog. If the cmd has
+ * advanced out of the backlog the "err" value of the callback
+ * will be -EINPROGRESS. Any other "err" value during callback is
+ * the result of the operation.
+ *
+ * The cmd has been successfully queued if:
+ *   the return code is -EINPROGRESS or
+ *   the return code is -EBUSY and CCP_CMD_MAY_BACKLOG flag is set
+ */
+int ccp_enqueue_cmd(struct ccp_cmd *cmd)
+{
+	struct ccp_device *ccp;
+	unsigned long flags;
+	unsigned int i;
+	int ret;
+
+	/* Some commands might need to be sent to a specific device */
+	ccp = cmd->ccp ? cmd->ccp : ccp_get_device();
+
+	if (!ccp)
+		return -ENODEV;
+
+	/* Caller must supply a callback routine */
+	if (!cmd->callback)
+		return -EINVAL;
+
+	cmd->ccp = ccp;
+
+	spin_lock_irqsave(&ccp->cmd_lock, flags);
+
+	i = ccp->cmd_q_count;
+
+	if (ccp->cmd_count >= MAX_CMD_QLEN) {
+		if (cmd->flags & CCP_CMD_MAY_BACKLOG) {
+			ret = -EBUSY;
+			list_add_tail(&cmd->entry, &ccp->backlog);
+		} else {
+			ret = -ENOSPC;
+		}
+	} else {
+		ret = -EINPROGRESS;
+		ccp->cmd_count++;
+		list_add_tail(&cmd->entry, &ccp->cmd);
+
+		/* Find an idle queue */
+		if (!ccp->suspending) {
+			for (i = 0; i < ccp->cmd_q_count; i++) {
+				if (ccp->cmd_q[i].active)
+					continue;
+
+				break;
+			}
+		}
+	}
+
+	spin_unlock_irqrestore(&ccp->cmd_lock, flags);
+
+	/* If we found an idle queue, wake it up */
+	if (i < ccp->cmd_q_count)
+		wake_up_process(ccp->cmd_q[i].kthread);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ccp_enqueue_cmd);
+
+static void ccp_do_cmd_backlog(struct work_struct *work)
+{
+	struct ccp_cmd *cmd = container_of(work, struct ccp_cmd, work);
+	struct ccp_device *ccp = cmd->ccp;
+	unsigned long flags;
+	unsigned int i;
+
+	cmd->callback(cmd->data, -EINPROGRESS);
+
+	spin_lock_irqsave(&ccp->cmd_lock, flags);
+
+	ccp->cmd_count++;
+	list_add_tail(&cmd->entry, &ccp->cmd);
+
+	/* Find an idle queue */
+	for (i = 0; i < ccp->cmd_q_count; i++) {
+		if (ccp->cmd_q[i].active)
+			continue;
+
+		break;
+	}
+
+	spin_unlock_irqrestore(&ccp->cmd_lock, flags);
+
+	/* If we found an idle queue, wake it up */
+	if (i < ccp->cmd_q_count)
+		wake_up_process(ccp->cmd_q[i].kthread);
+}
+
+static struct ccp_cmd *ccp_dequeue_cmd(struct ccp_cmd_queue *cmd_q)
+{
+	struct ccp_device *ccp = cmd_q->ccp;
+	struct ccp_cmd *cmd = NULL;
+	struct ccp_cmd *backlog = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ccp->cmd_lock, flags);
+
+	cmd_q->active = 0;
+
+	if (ccp->suspending) {
+		cmd_q->suspended = 1;
+
+		spin_unlock_irqrestore(&ccp->cmd_lock, flags);
+		wake_up_interruptible(&ccp->suspend_queue);
+
+		return NULL;
+	}
+
+	if (ccp->cmd_count) {
+		cmd_q->active = 1;
+
+		cmd = list_first_entry(&ccp->cmd, struct ccp_cmd, entry);
+		list_del(&cmd->entry);
+
+		ccp->cmd_count--;
+	}
+
+	if (!list_empty(&ccp->backlog)) {
+		backlog = list_first_entry(&ccp->backlog, struct ccp_cmd,
+					   entry);
+		list_del(&backlog->entry);
+	}
+
+	spin_unlock_irqrestore(&ccp->cmd_lock, flags);
+
+	if (backlog) {
+		INIT_WORK(&backlog->work, ccp_do_cmd_backlog);
+		schedule_work(&backlog->work);
+	}
+
+	return cmd;
+}
+
+static void ccp_do_cmd_complete(unsigned long data)
+{
+	struct ccp_tasklet_data *tdata = (struct ccp_tasklet_data *)data;
+	struct ccp_cmd *cmd = tdata->cmd;
+
+	cmd->callback(cmd->data, cmd->ret);
+
+	complete(&tdata->completion);
+}
+
+/**
+ * ccp_cmd_queue_thread - create a kernel thread to manage a CCP queue
+ *
+ * @data: thread-specific data
+ */
+int ccp_cmd_queue_thread(void *data)
+{
+	struct ccp_cmd_queue *cmd_q = (struct ccp_cmd_queue *)data;
+	struct ccp_cmd *cmd;
+	struct ccp_tasklet_data tdata;
+	struct tasklet_struct tasklet;
+
+	tasklet_init(&tasklet, ccp_do_cmd_complete, (unsigned long)&tdata);
+
+	set_current_state(TASK_INTERRUPTIBLE);
+	while (!kthread_should_stop()) {
+		schedule();
+
+		set_current_state(TASK_INTERRUPTIBLE);
+
+		cmd = ccp_dequeue_cmd(cmd_q);
+		if (!cmd)
+			continue;
+
+		__set_current_state(TASK_RUNNING);
+
+		/* Execute the command */
+		cmd->ret = ccp_run_cmd(cmd_q, cmd);
+
+		/* Schedule the completion callback */
+		tdata.cmd = cmd;
+		init_completion(&tdata.completion);
+		tasklet_schedule(&tasklet);
+		wait_for_completion(&tdata.completion);
+	}
+
+	__set_current_state(TASK_RUNNING);
+
+	return 0;
+}
+
+/**
+ * ccp_alloc_struct - allocate and initialize the ccp_device struct
+ *
+ * @sp: sp_device struct of the CCP
+ */
+struct ccp_device *ccp_alloc_struct(struct sp_device *sp)
+{
+	struct device *dev = sp->dev;
+	struct ccp_device *ccp;
+
+	ccp = devm_kzalloc(dev, sizeof(*ccp), GFP_KERNEL);
+	if (!ccp)
+		return NULL;
+	ccp->dev = dev;
+	ccp->sp = sp;
+	ccp->axcache = sp->axcache;
+
+	INIT_LIST_HEAD(&ccp->cmd);
+	INIT_LIST_HEAD(&ccp->backlog);
+
+	spin_lock_init(&ccp->cmd_lock);
+	mutex_init(&ccp->req_mutex);
+	mutex_init(&ccp->sb_mutex);
+	ccp->sb_count = KSB_COUNT;
+	ccp->sb_start = 0;
+
+	/* Initialize the wait queues */
+	init_waitqueue_head(&ccp->sb_queue);
+	init_waitqueue_head(&ccp->suspend_queue);
+
+	snprintf(ccp->name, MAX_CCP_NAME_LEN, "ccp-%u", sp->ord);
+	snprintf(ccp->rngname, MAX_CCP_NAME_LEN, "ccp-%u-rng", sp->ord);
+
+	return ccp;
+}
+
+int ccp_trng_read(struct hwrng *rng, void *data, size_t max, bool wait)
+{
+	struct ccp_device *ccp = container_of(rng, struct ccp_device, hwrng);
+	u32 trng_value;
+	int len = min_t(int, sizeof(trng_value), max);
+
+	/* Locking is provided by the caller so we can update device
+	 * hwrng-related fields safely
+	 */
+	trng_value = ioread32(ccp->io_regs + TRNG_OUT_REG);
+	if (!trng_value) {
+		/* Zero is returned if not data is available or if a
+		 * bad-entropy error is present. Assume an error if
+		 * we exceed TRNG_RETRIES reads of zero.
+		 */
+		if (ccp->hwrng_retries++ > TRNG_RETRIES)
+			return -EIO;
+
+		return 0;
+	}
+
+	/* Reset the counter and save the rng value */
+	ccp->hwrng_retries = 0;
+	memcpy(data, &trng_value, len);
+
+	return len;
+}
+
+bool ccp_queues_suspended(struct ccp_device *ccp)
+{
+	unsigned int suspended = 0;
+	unsigned long flags;
+	unsigned int i;
+
+	spin_lock_irqsave(&ccp->cmd_lock, flags);
+
+	for (i = 0; i < ccp->cmd_q_count; i++)
+		if (ccp->cmd_q[i].suspended)
+			suspended++;
+
+	spin_unlock_irqrestore(&ccp->cmd_lock, flags);
+
+	return ccp->cmd_q_count == suspended;
+}
+
+void ccp_dev_suspend(struct sp_device *sp)
+{
+	struct ccp_device *ccp = sp->ccp_data;
+	unsigned long flags;
+	unsigned int i;
+
+	/* If there's no device there's nothing to do */
+	if (!ccp)
+		return;
+
+	spin_lock_irqsave(&ccp->cmd_lock, flags);
+
+	ccp->suspending = 1;
+
+	/* Wake all the queue kthreads to prepare for suspend */
+	for (i = 0; i < ccp->cmd_q_count; i++)
+		wake_up_process(ccp->cmd_q[i].kthread);
+
+	spin_unlock_irqrestore(&ccp->cmd_lock, flags);
+
+	/* Wait for all queue kthreads to say they're done */
+	while (!ccp_queues_suspended(ccp))
+		wait_event_interruptible(ccp->suspend_queue,
+					 ccp_queues_suspended(ccp));
+}
+
+void ccp_dev_resume(struct sp_device *sp)
+{
+	struct ccp_device *ccp = sp->ccp_data;
+	unsigned long flags;
+	unsigned int i;
+
+	/* If there's no device there's nothing to do */
+	if (!ccp)
+		return;
+
+	spin_lock_irqsave(&ccp->cmd_lock, flags);
+
+	ccp->suspending = 0;
+
+	/* Wake up all the kthreads */
+	for (i = 0; i < ccp->cmd_q_count; i++) {
+		ccp->cmd_q[i].suspended = 0;
+		wake_up_process(ccp->cmd_q[i].kthread);
+	}
+
+	spin_unlock_irqrestore(&ccp->cmd_lock, flags);
+}
+
+int ccp_dev_init(struct sp_device *sp)
+{
+	struct device *dev = sp->dev;
+	struct ccp_device *ccp;
+	int ret;
+
+	/*
+	 * Check how many we have so far, and stop after reaching
+	 * that number
+	 */
+	if (atomic_inc_return(&dev_count) > max_devs)
+		return 0; /* don't fail the load */
+
+	ret = -ENOMEM;
+	ccp = ccp_alloc_struct(sp);
+	if (!ccp)
+		goto e_err;
+	sp->ccp_data = ccp;
+
+	if (!nqueues || (nqueues > MAX_HW_QUEUES))
+		ccp->max_q_count = MAX_HW_QUEUES;
+	else
+		ccp->max_q_count = nqueues;
+
+	ccp->vdata = (struct ccp_vdata *)sp->dev_vdata->ccp_vdata;
+	if (!ccp->vdata || !ccp->vdata->version) {
+		ret = -ENODEV;
+		dev_err(dev, "missing driver data\n");
+		goto e_err;
+	}
+
+	ccp->use_tasklet = sp->use_tasklet;
+
+	ccp->io_regs = sp->io_map + ccp->vdata->offset;
+	if (ccp->vdata->setup)
+		ccp->vdata->setup(ccp);
+
+	ret = ccp->vdata->perform->init(ccp);
+	if (ret) {
+		/* A positive number means that the device cannot be initialized,
+		 * but no additional message is required.
+		 */
+		if (ret > 0)
+			goto e_quiet;
+
+		/* An unexpected problem occurred, and should be reported in the log */
+		goto e_err;
+	}
+
+	dev_notice(dev, "ccp enabled\n");
+
+	return 0;
+
+e_err:
+	dev_notice(dev, "ccp initialization failed\n");
+
+e_quiet:
+	sp->ccp_data = NULL;
+
+	return ret;
+}
+
+void ccp_dev_destroy(struct sp_device *sp)
+{
+	struct ccp_device *ccp = sp->ccp_data;
+
+	if (!ccp)
+		return;
+
+	ccp->vdata->perform->destroy(ccp);
+}