Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 347 insertions, 0 deletions

diff --git a/drivers/crypto/gemini/sl3516-ce.h b/drivers/crypto/gemini/sl3516-ce.h
new file mode 100644
index 000000000..4c0ec6c92
--- /dev/null
+++ b/drivers/crypto/gemini/sl3516-ce.h
@@ -0,0 +1,347 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * sl3516-ce.h - hardware cryptographic offloader for cortina/gemini SoC
+ *
+ * Copyright (C) 2021 Corentin LABBE <clabbe@baylibre.com>
+ *
+ * General notes on this driver:
+ * Called either Crypto Acceleration Engine Module, Security Acceleration Engine
+ * or IPSEC module in the datasheet, it will be called Crypto Engine for short
+ * in this driver.
+ * The CE was designed to handle IPSEC and wifi(TKIP WEP) protocol.
+ * It can handle AES, DES, 3DES, MD5, WEP, TKIP, SHA1, HMAC(MD5), HMAC(SHA1),
+ * Michael cipher/digest suites.
+ * It acts the same as a network hw, with both RX and TX chained descriptors.
+ */
+#include <crypto/aes.h>
+#include <crypto/engine.h>
+#include <crypto/scatterwalk.h>
+#include <crypto/skcipher.h>
+#include <linux/crypto.h>
+#include <linux/debugfs.h>
+#include <linux/hw_random.h>
+
+#define TQ0_TYPE_DATA 0
+#define TQ0_TYPE_CTRL BIT(0)
+#define TQ1_CIPHER BIT(1)
+#define TQ2_AUTH BIT(2)
+#define TQ3_IV BIT(3)
+#define TQ4_KEY0 BIT(4)
+#define TQ5_KEY4 BIT(5)
+#define TQ6_KEY6 BIT(6)
+#define TQ7_AKEY0 BIT(7)
+#define TQ8_AKEY2 BIT(8)
+#define TQ9_AKEY2 BIT(9)
+
+#define ECB_AES       0x2
+
+#define DESC_LAST 0x01
+#define DESC_FIRST 0x02
+
+#define IPSEC_ID		0x0000
+#define IPSEC_STATUS_REG	0x00a8
+#define IPSEC_RAND_NUM_REG	0x00ac
+#define IPSEC_DMA_DEVICE_ID	0xff00
+#define IPSEC_DMA_STATUS	0xff04
+#define IPSEC_TXDMA_CTRL	0xff08
+#define IPSEC_TXDMA_FIRST_DESC	0xff0c
+#define IPSEC_TXDMA_CURR_DESC	0xff10
+#define IPSEC_RXDMA_CTRL	0xff14
+#define IPSEC_RXDMA_FIRST_DESC	0xff18
+#define IPSEC_RXDMA_CURR_DESC	0xff1c
+#define IPSEC_TXDMA_BUF_ADDR	0xff28
+#define IPSEC_RXDMA_BUF_ADDR	0xff38
+#define IPSEC_RXDMA_BUF_SIZE	0xff30
+
+#define CE_ENCRYPTION		0x01
+#define CE_DECRYPTION		0x03
+
+#define MAXDESC 6
+
+#define DMA_STATUS_RS_EOFI	BIT(22)
+#define DMA_STATUS_RS_PERR	BIT(24)
+#define DMA_STATUS_RS_DERR	BIT(25)
+#define DMA_STATUS_TS_EOFI	BIT(27)
+#define DMA_STATUS_TS_PERR	BIT(29)
+#define DMA_STATUS_TS_DERR	BIT(30)
+
+#define TXDMA_CTRL_START BIT(31)
+#define TXDMA_CTRL_CONTINUE BIT(30)
+#define TXDMA_CTRL_CHAIN_MODE BIT(29)
+/* the burst value is not documented in the datasheet */
+#define TXDMA_CTRL_BURST_UNK BIT(22)
+#define TXDMA_CTRL_INT_FAIL BIT(17)
+#define TXDMA_CTRL_INT_PERR BIT(16)
+
+#define RXDMA_CTRL_START BIT(31)
+#define RXDMA_CTRL_CONTINUE BIT(30)
+#define RXDMA_CTRL_CHAIN_MODE BIT(29)
+/* the burst value is not documented in the datasheet */
+#define RXDMA_CTRL_BURST_UNK BIT(22)
+#define RXDMA_CTRL_INT_FINISH BIT(18)
+#define RXDMA_CTRL_INT_FAIL BIT(17)
+#define RXDMA_CTRL_INT_PERR BIT(16)
+#define RXDMA_CTRL_INT_EOD BIT(15)
+#define RXDMA_CTRL_INT_EOF BIT(14)
+
+#define CE_CPU 0
+#define CE_DMA 1
+
+/*
+ * struct sl3516_ce_descriptor - descriptor for CE operations
+ * @frame_ctrl:		Information for the current descriptor
+ * @flag_status:	For send packet, describe flag of operations.
+ * @buf_adr:		pointer to a send/recv buffer for data packet
+ * @next_desc:		control linking to other descriptors
+ */
+struct descriptor {
+	union {
+		u32 raw;
+		/*
+		 * struct desc_frame_ctrl - Information for the current descriptor
+		 * @buffer_size:	the size of buffer at buf_adr
+		 * @desc_count:		Upon completion of a DMA operation, DMA
+		 *			write the number of descriptors used
+		 *			for the current frame
+		 * @checksum:		unknown
+		 * @authcomp:		unknown
+		 * @perr:		Protocol error during processing this descriptor
+		 * @derr:		Data error during processing this descriptor
+		 * @own:		0 if owned by CPU, 1 for DMA
+		 */
+		struct desc_frame_ctrl {
+			u32 buffer_size	:16;
+			u32 desc_count	:6;
+			u32 checksum	:6;
+			u32 authcomp	:1;
+			u32 perr	:1;
+			u32 derr	:1;
+			u32 own		:1;
+		} bits;
+	} frame_ctrl;
+
+	union {
+		u32 raw;
+		/*
+		 * struct desc_flag_status - flag for this descriptor
+		 * @tqflag:	list of flag describing the type of operation
+		 *		to be performed.
+		 */
+		struct desc_tx_flag_status {
+			u32 tqflag	:10;
+			u32 unused	:22;
+		} tx_flag;
+	} flag_status;
+
+	u32 buf_adr;
+
+	union {
+		u32 next_descriptor;
+		/*
+		 * struct desc_next - describe chaining of descriptors
+		 * @sof_eof:	does the descriptor is first (0x11),
+		 *		the last (0x01), middle of a chan (0x00)
+		 *		or the only one (0x11)
+		 * @dec:	AHB bus address increase (0), decrease (1)
+		 * @eofie:	End of frame interrupt enable
+		 * @ndar:	Next descriptor address
+		 */
+		struct desc_next {
+			u32 sof_eof	:2;
+			u32 dec		:1;
+			u32 eofie	:1;
+			u32 ndar	:28;
+		} bits;
+	} next_desc;
+};
+
+/*
+ * struct control - The value of this register is used to set the
+ *			operation mode of the IPSec Module.
+ * @process_id:		Used to identify the process. The number will be copied
+ *			to the descriptor status of the received packet.
+ * @auth_check_len:	Number of 32-bit words to be checked or appended by the
+ *			authentication module
+ * @auth_algorithm:
+ * @auth_mode:		0:append 1:Check Authentication Result
+ * @fcs_stream_copy:	0:enable 1:disable authentication stream copy
+ * @mix_key_sel:	0:use rCipherKey0-3  1:use Key Mixer
+ * @aesnk:		AES Key Size
+ * @cipher_algorithm:	choice of CBC/ECE and AES/DES/3DES
+ * @op_mode:		Operation Mode for the IPSec Module
+ */
+struct pkt_control_header {
+	u32 process_id		:8;
+	u32 auth_check_len	:3;
+	u32 un1			:1;
+	u32 auth_algorithm	:3;
+	u32 auth_mode		:1;
+	u32 fcs_stream_copy	:1;
+	u32 un2			:2;
+	u32 mix_key_sel		:1;
+	u32 aesnk		:4;
+	u32 cipher_algorithm	:3;
+	u32 un3			:1;
+	u32 op_mode		:4;
+};
+
+struct pkt_control_cipher {
+	u32 algorithm_len	:16;
+	u32 header_len		:16;
+};
+
+/*
+ * struct pkt_control_ecb - control packet for ECB
+ */
+struct pkt_control_ecb {
+	struct pkt_control_header control;
+	struct pkt_control_cipher cipher;
+	unsigned char key[AES_MAX_KEY_SIZE];
+};
+
+/*
+ * struct sl3516_ce_dev - main container for all this driver information
+ * @base:	base address
+ * @clks:	clocks used
+ * @reset:	pointer to reset controller
+ * @dev:	the platform device
+ * @engine:	ptr to the crypto/crypto_engine
+ * @complete:	completion for the current task on this flow
+ * @status:	set to 1 by interrupt if task is done
+ * @dtx:	base DMA address for TX descriptors
+ * @tx		base address of TX descriptors
+ * @drx:	base DMA address for RX descriptors
+ * @rx		base address of RX descriptors
+ * @ctx		current used TX descriptor
+ * @crx		current used RX descriptor
+ * @trng	hw_random structure for RNG
+ * @hwrng_stat_req	number of HWRNG requests
+ * @hwrng_stat_bytes	total number of bytes generated by RNG
+ * @stat_irq	number of IRQ handled by CE
+ * @stat_irq_tx	number of TX IRQ handled by CE
+ * @stat_irq_rx	number of RX IRQ handled by CE
+ * @stat_req	number of requests handled by CE
+ * @fallbak_sg_count_tx		number of fallback due to destination SG count
+ * @fallbak_sg_count_rx		number of fallback due to source SG count
+ * @fallbak_not_same_len	number of fallback due to difference in SG length
+ * @dbgfs_dir:	Debugfs dentry for statistic directory
+ * @dbgfs_stats: Debugfs dentry for statistic counters
+ */
+struct sl3516_ce_dev {
+	void __iomem *base;
+	struct clk *clks;
+	struct reset_control *reset;
+	struct device *dev;
+	struct crypto_engine *engine;
+	struct completion complete;
+	int status;
+	dma_addr_t dtx;
+	struct descriptor *tx;
+	dma_addr_t drx;
+	struct descriptor *rx;
+	int ctx;
+	int crx;
+	struct hwrng trng;
+	unsigned long hwrng_stat_req;
+	unsigned long hwrng_stat_bytes;
+	unsigned long stat_irq;
+	unsigned long stat_irq_tx;
+	unsigned long stat_irq_rx;
+	unsigned long stat_req;
+	unsigned long fallback_sg_count_tx;
+	unsigned long fallback_sg_count_rx;
+	unsigned long fallback_not_same_len;
+	unsigned long fallback_mod16;
+	unsigned long fallback_align16;
+#ifdef CONFIG_CRYPTO_DEV_SL3516_DEBUG
+	struct dentry *dbgfs_dir;
+	struct dentry *dbgfs_stats;
+#endif
+	void *pctrl;
+	dma_addr_t dctrl;
+};
+
+struct sginfo {
+	u32 addr;
+	u32 len;
+};
+
+/*
+ * struct sl3516_ce_cipher_req_ctx - context for a skcipher request
+ * @t_src:		list of mapped SGs with their size
+ * @t_dst:		list of mapped SGs with their size
+ * @op_dir:		direction (encrypt vs decrypt) for this request
+ * @pctrllen:		the length of the ctrl packet
+ * @tqflag:		the TQflag to set in data packet
+ * @h			pointer to the pkt_control_cipher header
+ * @nr_sgs:		number of source SG
+ * @nr_sgd:		number of destination SG
+ * @fallback_req:	request struct for invoking the fallback skcipher TFM
+ */
+struct sl3516_ce_cipher_req_ctx {
+	struct sginfo t_src[MAXDESC];
+	struct sginfo t_dst[MAXDESC];
+	u32 op_dir;
+	unsigned int pctrllen;
+	u32 tqflag;
+	struct pkt_control_cipher *h;
+	int nr_sgs;
+	int nr_sgd;
+	struct skcipher_request fallback_req;   // keep at the end
+};
+
+/*
+ * struct sl3516_ce_cipher_tfm_ctx - context for a skcipher TFM
+ * @enginectx:		crypto_engine used by this TFM
+ * @key:		pointer to key data
+ * @keylen:		len of the key
+ * @ce:			pointer to the private data of driver handling this TFM
+ * @fallback_tfm:	pointer to the fallback TFM
+ *
+ * enginectx must be the first element
+ */
+struct sl3516_ce_cipher_tfm_ctx {
+	struct crypto_engine_ctx enginectx;
+	u32 *key;
+	u32 keylen;
+	struct sl3516_ce_dev *ce;
+	struct crypto_skcipher *fallback_tfm;
+};
+
+/*
+ * struct sl3516_ce_alg_template - crypto_alg template
+ * @type:		the CRYPTO_ALG_TYPE for this template
+ * @mode:		value to be used in control packet for this algorithm
+ * @ce:			pointer to the sl3516_ce_dev structure associated with
+ *			this template
+ * @alg:		one of sub struct must be used
+ * @stat_req:		number of request done on this template
+ * @stat_fb:		number of request which has fallbacked
+ * @stat_bytes:		total data size done by this template
+ */
+struct sl3516_ce_alg_template {
+	u32 type;
+	u32 mode;
+	struct sl3516_ce_dev *ce;
+	union {
+		struct skcipher_alg skcipher;
+	} alg;
+	unsigned long stat_req;
+	unsigned long stat_fb;
+	unsigned long stat_bytes;
+};
+
+int sl3516_ce_enqueue(struct crypto_async_request *areq, u32 type);
+
+int sl3516_ce_aes_setkey(struct crypto_skcipher *tfm, const u8 *key,
+			 unsigned int keylen);
+int sl3516_ce_cipher_init(struct crypto_tfm *tfm);
+void sl3516_ce_cipher_exit(struct crypto_tfm *tfm);
+int sl3516_ce_skdecrypt(struct skcipher_request *areq);
+int sl3516_ce_skencrypt(struct skcipher_request *areq);
+
+int sl3516_ce_run_task(struct sl3516_ce_dev *ce,
+		       struct sl3516_ce_cipher_req_ctx *rctx, const char *name);
+
+int sl3516_ce_rng_register(struct sl3516_ce_dev *ce);
+void sl3516_ce_rng_unregister(struct sl3516_ce_dev *ce);