Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 407 insertions, 0 deletions

diff --git a/drivers/crypto/sa2ul.h b/drivers/crypto/sa2ul.h
new file mode 100644
index 000000000..92bf97232
--- /dev/null
+++ b/drivers/crypto/sa2ul.h
@@ -0,0 +1,407 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * K3 SA2UL crypto accelerator driver
+ *
+ * Copyright (C) 2018-2020 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors:	Keerthy
+ *		Vitaly Andrianov
+ *		Tero Kristo
+ */
+
+#ifndef _K3_SA2UL_
+#define _K3_SA2UL_
+
+#include <crypto/aes.h>
+#include <crypto/sha1.h>
+#include <crypto/sha2.h>
+
+#define SA_ENGINE_STATUS		0x0008
+#define SA_ENGINE_ENABLE_CONTROL	0x1000
+
+struct sa_tfm_ctx;
+/*
+ * SA_ENGINE_ENABLE_CONTROL register bits
+ */
+#define SA_EEC_ENCSS_EN			0x00000001
+#define SA_EEC_AUTHSS_EN		0x00000002
+#define SA_EEC_TRNG_EN			0x00000008
+#define SA_EEC_PKA_EN			0x00000010
+#define SA_EEC_CTXCACH_EN		0x00000080
+#define SA_EEC_CPPI_PORT_IN_EN		0x00000200
+#define SA_EEC_CPPI_PORT_OUT_EN		0x00000800
+
+/*
+ * Encoding used to identify the typo of crypto operation
+ * performed on the packet when the packet is returned
+ * by SA
+ */
+#define SA_REQ_SUBTYPE_ENC	0x0001
+#define SA_REQ_SUBTYPE_DEC	0x0002
+#define SA_REQ_SUBTYPE_SHIFT	16
+#define SA_REQ_SUBTYPE_MASK	0xffff
+
+/* Number of 32 bit words in EPIB  */
+#define SA_DMA_NUM_EPIB_WORDS   4
+
+/* Number of 32 bit words in PS data  */
+#define SA_DMA_NUM_PS_WORDS     16
+#define NKEY_SZ			3
+#define MCI_SZ			27
+
+/*
+ * Maximum number of simultaeneous security contexts
+ * supported by the driver
+ */
+#define SA_MAX_NUM_CTX	512
+
+/*
+ * Assumption: CTX size is multiple of 32
+ */
+#define SA_CTX_SIZE_TO_DMA_SIZE(ctx_sz) \
+		((ctx_sz) ? ((ctx_sz) / 32 - 1) : 0)
+
+#define SA_CTX_ENC_KEY_OFFSET   32
+#define SA_CTX_ENC_AUX1_OFFSET  64
+#define SA_CTX_ENC_AUX2_OFFSET  96
+#define SA_CTX_ENC_AUX3_OFFSET  112
+#define SA_CTX_ENC_AUX4_OFFSET  128
+
+/* Next Engine Select code in CP_ACE */
+#define SA_ENG_ID_EM1   2       /* Enc/Dec engine with AES/DEC core */
+#define SA_ENG_ID_EM2   3       /* Encryption/Decryption enginefor pass 2 */
+#define SA_ENG_ID_AM1   4       /* Auth. engine with SHA1/MD5/SHA2 core */
+#define SA_ENG_ID_AM2   5       /*  Authentication engine for pass 2 */
+#define SA_ENG_ID_OUTPORT2 20   /*  Egress module 2  */
+
+/*
+ * Command Label Definitions
+ */
+#define SA_CMDL_OFFSET_NESC           0      /* Next Engine Select Code */
+#define SA_CMDL_OFFSET_LABEL_LEN      1      /* Engine Command Label Length */
+/* 16-bit Length of Data to be processed */
+#define SA_CMDL_OFFSET_DATA_LEN       2
+#define SA_CMDL_OFFSET_DATA_OFFSET    4      /* Stat Data Offset */
+#define SA_CMDL_OFFSET_OPTION_CTRL1   5      /* Option Control Byte 1 */
+#define SA_CMDL_OFFSET_OPTION_CTRL2   6      /* Option Control Byte 2 */
+#define SA_CMDL_OFFSET_OPTION_CTRL3   7      /* Option Control Byte 3 */
+#define SA_CMDL_OFFSET_OPTION_BYTE    8
+
+#define SA_CMDL_HEADER_SIZE_BYTES	8
+
+#define SA_CMDL_OPTION_BYTES_MAX_SIZE     72
+#define SA_CMDL_MAX_SIZE_BYTES (SA_CMDL_HEADER_SIZE_BYTES + \
+				SA_CMDL_OPTION_BYTES_MAX_SIZE)
+
+/* SWINFO word-0 flags */
+#define SA_SW_INFO_FLAG_EVICT   0x0001
+#define SA_SW_INFO_FLAG_TEAR    0x0002
+#define SA_SW_INFO_FLAG_NOPD    0x0004
+
+/*
+ * This type represents the various packet types to be processed
+ * by the PHP engine in SA.
+ * It is used to identify the corresponding PHP processing function.
+ */
+#define SA_CTX_PE_PKT_TYPE_3GPP_AIR    0    /* 3GPP Air Cipher */
+#define SA_CTX_PE_PKT_TYPE_SRTP        1    /* SRTP */
+#define SA_CTX_PE_PKT_TYPE_IPSEC_AH    2    /* IPSec Authentication Header */
+/* IPSec Encapsulating Security Payload */
+#define SA_CTX_PE_PKT_TYPE_IPSEC_ESP   3
+/* Indicates that it is in data mode, It may not be used by PHP */
+#define SA_CTX_PE_PKT_TYPE_NONE        4
+#define SA_CTX_ENC_TYPE1_SZ     64      /* Encryption SC with Key only */
+#define SA_CTX_ENC_TYPE2_SZ     96      /* Encryption SC with Key and Aux1 */
+
+#define SA_CTX_AUTH_TYPE1_SZ    64      /* Auth SC with Key only */
+#define SA_CTX_AUTH_TYPE2_SZ    96      /* Auth SC with Key and Aux1 */
+/* Size of security context for PHP engine */
+#define SA_CTX_PHP_PE_CTX_SZ    64
+
+#define SA_CTX_MAX_SZ (64 + SA_CTX_ENC_TYPE2_SZ + SA_CTX_AUTH_TYPE2_SZ)
+
+/*
+ * Encoding of F/E control in SCCTL
+ *  Bit 0-1: Fetch PHP Bytes
+ *  Bit 2-3: Fetch Encryption/Air Ciphering Bytes
+ *  Bit 4-5: Fetch Authentication Bytes or Encr pass 2
+ *  Bit 6-7: Evict PHP Bytes
+ *
+ *  where   00 = 0 bytes
+ *          01 = 64 bytes
+ *          10 = 96 bytes
+ *          11 = 128 bytes
+ */
+#define SA_CTX_DMA_SIZE_0       0
+#define SA_CTX_DMA_SIZE_64      1
+#define SA_CTX_DMA_SIZE_96      2
+#define SA_CTX_DMA_SIZE_128     3
+
+/*
+ * Byte offset of the owner word in SCCTL
+ * in the security context
+ */
+#define SA_CTX_SCCTL_OWNER_OFFSET 0
+
+#define SA_CTX_ENC_KEY_OFFSET   32
+#define SA_CTX_ENC_AUX1_OFFSET  64
+#define SA_CTX_ENC_AUX2_OFFSET  96
+#define SA_CTX_ENC_AUX3_OFFSET  112
+#define SA_CTX_ENC_AUX4_OFFSET  128
+
+#define SA_SCCTL_FE_AUTH_ENC	0x65
+#define SA_SCCTL_FE_ENC		0x8D
+
+#define SA_ALIGN_MASK		(sizeof(u32) - 1)
+#define SA_ALIGNED		__aligned(32)
+
+#define SA_AUTH_SW_CTRL_MD5	1
+#define SA_AUTH_SW_CTRL_SHA1	2
+#define SA_AUTH_SW_CTRL_SHA224	3
+#define SA_AUTH_SW_CTRL_SHA256	4
+#define SA_AUTH_SW_CTRL_SHA384	5
+#define SA_AUTH_SW_CTRL_SHA512	6
+
+/* SA2UL can only handle maximum data size of 64KB */
+#define SA_MAX_DATA_SZ		U16_MAX
+
+/*
+ * SA2UL can provide unpredictable results with packet sizes that fall
+ * the following range, so avoid using it.
+ */
+#define SA_UNSAFE_DATA_SZ_MIN	240
+#define SA_UNSAFE_DATA_SZ_MAX	256
+
+struct sa_match_data;
+
+/**
+ * struct sa_crypto_data - Crypto driver instance data
+ * @base: Base address of the register space
+ * @soc_data: Pointer to SoC specific data
+ * @pdev: Platform device pointer
+ * @sc_pool: security context pool
+ * @dev: Device pointer
+ * @scid_lock: secure context ID lock
+ * @sc_id_start: starting index for SC ID
+ * @sc_id_end: Ending index for SC ID
+ * @sc_id: Security Context ID
+ * @ctx_bm: Bitmap to keep track of Security context ID's
+ * @ctx: SA tfm context pointer
+ * @dma_rx1: Pointer to DMA rx channel for sizes < 256 Bytes
+ * @dma_rx2: Pointer to DMA rx channel for sizes > 256 Bytes
+ * @dma_tx: Pointer to DMA TX channel
+ */
+struct sa_crypto_data {
+	void __iomem *base;
+	const struct sa_match_data *match_data;
+	struct platform_device	*pdev;
+	struct dma_pool		*sc_pool;
+	struct device *dev;
+	spinlock_t	scid_lock; /* lock for SC-ID allocation */
+	/* Security context data */
+	u16		sc_id_start;
+	u16		sc_id_end;
+	u16		sc_id;
+	unsigned long	ctx_bm[DIV_ROUND_UP(SA_MAX_NUM_CTX,
+				BITS_PER_LONG)];
+	struct sa_tfm_ctx	*ctx;
+	struct dma_chan		*dma_rx1;
+	struct dma_chan		*dma_rx2;
+	struct dma_chan		*dma_tx;
+};
+
+/**
+ * struct sa_cmdl_param_info: Command label parameters info
+ * @index: Index of the parameter in the command label format
+ * @offset: the offset of the parameter
+ * @size: Size of the parameter
+ */
+struct sa_cmdl_param_info {
+	u16	index;
+	u16	offset;
+	u16	size;
+};
+
+/* Maximum length of Auxiliary data in 32bit words */
+#define SA_MAX_AUX_DATA_WORDS	8
+
+/**
+ * struct sa_cmdl_upd_info: Command label updation info
+ * @flags: flags in command label
+ * @submode: Encryption submodes
+ * @enc_size: Size of first pass encryption size
+ * @enc_size2: Size of second pass encryption size
+ * @enc_offset: Encryption payload offset in the packet
+ * @enc_iv: Encryption initialization vector for pass2
+ * @enc_iv2: Encryption initialization vector for pass2
+ * @aad: Associated data
+ * @payload: Payload info
+ * @auth_size: Authentication size for pass 1
+ * @auth_size2: Authentication size for pass 2
+ * @auth_offset: Authentication payload offset
+ * @auth_iv: Authentication initialization vector
+ * @aux_key_info: Authentication aux key information
+ * @aux_key: Aux key for authentication
+ */
+struct sa_cmdl_upd_info {
+	u16	flags;
+	u16	submode;
+	struct sa_cmdl_param_info	enc_size;
+	struct sa_cmdl_param_info	enc_size2;
+	struct sa_cmdl_param_info	enc_offset;
+	struct sa_cmdl_param_info	enc_iv;
+	struct sa_cmdl_param_info	enc_iv2;
+	struct sa_cmdl_param_info	aad;
+	struct sa_cmdl_param_info	payload;
+	struct sa_cmdl_param_info	auth_size;
+	struct sa_cmdl_param_info	auth_size2;
+	struct sa_cmdl_param_info	auth_offset;
+	struct sa_cmdl_param_info	auth_iv;
+	struct sa_cmdl_param_info	aux_key_info;
+	u32				aux_key[SA_MAX_AUX_DATA_WORDS];
+};
+
+/*
+ * Number of 32bit words appended after the command label
+ * in PSDATA to identify the crypto request context.
+ * word-0: Request type
+ * word-1: pointer to request
+ */
+#define SA_PSDATA_CTX_WORDS 4
+
+/* Maximum size of Command label in 32 words */
+#define SA_MAX_CMDL_WORDS (SA_DMA_NUM_PS_WORDS - SA_PSDATA_CTX_WORDS)
+
+/**
+ * struct sa_ctx_info: SA context information
+ * @sc: Pointer to security context
+ * @sc_phys: Security context physical address that is passed on to SA2UL
+ * @sc_id: Security context ID
+ * @cmdl_size: Command label size
+ * @cmdl: Command label for a particular iteration
+ * @cmdl_upd_info: structure holding command label updation info
+ * @epib: Extended protocol information block words
+ */
+struct sa_ctx_info {
+	u8		*sc;
+	dma_addr_t	sc_phys;
+	u16		sc_id;
+	u16		cmdl_size;
+	u32		cmdl[SA_MAX_CMDL_WORDS];
+	struct sa_cmdl_upd_info cmdl_upd_info;
+	/* Store Auxiliary data such as K2/K3 subkeys in AES-XCBC */
+	u32		epib[SA_DMA_NUM_EPIB_WORDS];
+};
+
+/**
+ * struct sa_tfm_ctx: TFM context structure
+ * @dev_data: struct sa_crypto_data pointer
+ * @enc: struct sa_ctx_info for encryption
+ * @dec: struct sa_ctx_info for decryption
+ * @keylen: encrption/decryption keylength
+ * @iv_idx: Initialization vector index
+ * @key: encryption key
+ * @fallback: SW fallback algorithm
+ */
+struct sa_tfm_ctx {
+	struct sa_crypto_data *dev_data;
+	struct sa_ctx_info enc;
+	struct sa_ctx_info dec;
+	struct sa_ctx_info auth;
+	int keylen;
+	int iv_idx;
+	u32 key[AES_KEYSIZE_256 / sizeof(u32)];
+	u8 authkey[SHA512_BLOCK_SIZE];
+	struct crypto_shash	*shash;
+	/* for fallback */
+	union {
+		struct crypto_skcipher		*skcipher;
+		struct crypto_ahash		*ahash;
+		struct crypto_aead		*aead;
+	} fallback;
+};
+
+/**
+ * struct sa_sha_req_ctx: Structure used for sha request
+ * @dev_data: struct sa_crypto_data pointer
+ * @cmdl: Complete command label with psdata and epib included
+ * @fallback_req: SW fallback request container
+ */
+struct sa_sha_req_ctx {
+	struct sa_crypto_data	*dev_data;
+	u32			cmdl[SA_MAX_CMDL_WORDS + SA_PSDATA_CTX_WORDS];
+	struct ahash_request	fallback_req;
+};
+
+enum sa_submode {
+	SA_MODE_GEN = 0,
+	SA_MODE_CCM,
+	SA_MODE_GCM,
+	SA_MODE_GMAC
+};
+
+/* Encryption algorithms */
+enum sa_ealg_id {
+	SA_EALG_ID_NONE = 0,        /* No encryption */
+	SA_EALG_ID_NULL,            /* NULL encryption */
+	SA_EALG_ID_AES_CTR,         /* AES Counter mode */
+	SA_EALG_ID_AES_F8,          /* AES F8 mode */
+	SA_EALG_ID_AES_CBC,         /* AES CBC mode */
+	SA_EALG_ID_DES_CBC,         /* DES CBC mode */
+	SA_EALG_ID_3DES_CBC,        /* 3DES CBC mode */
+	SA_EALG_ID_CCM,             /* Counter with CBC-MAC mode */
+	SA_EALG_ID_GCM,             /* Galois Counter mode */
+	SA_EALG_ID_AES_ECB,
+	SA_EALG_ID_LAST
+};
+
+/* Authentication algorithms */
+enum sa_aalg_id {
+	SA_AALG_ID_NONE = 0,      /* No Authentication  */
+	SA_AALG_ID_NULL = SA_EALG_ID_LAST, /* NULL Authentication  */
+	SA_AALG_ID_MD5,           /* MD5 mode */
+	SA_AALG_ID_SHA1,          /* SHA1 mode */
+	SA_AALG_ID_SHA2_224,      /* 224-bit SHA2 mode */
+	SA_AALG_ID_SHA2_256,      /* 256-bit SHA2 mode */
+	SA_AALG_ID_SHA2_512,      /* 512-bit SHA2 mode */
+	SA_AALG_ID_HMAC_MD5,      /* HMAC with MD5 mode */
+	SA_AALG_ID_HMAC_SHA1,     /* HMAC with SHA1 mode */
+	SA_AALG_ID_HMAC_SHA2_224, /* HMAC with 224-bit SHA2 mode */
+	SA_AALG_ID_HMAC_SHA2_256, /* HMAC with 256-bit SHA2 mode */
+	SA_AALG_ID_GMAC,          /* Galois Message Auth. Code mode */
+	SA_AALG_ID_CMAC,          /* Cipher-based Mes. Auth. Code mode */
+	SA_AALG_ID_CBC_MAC,       /* Cipher Block Chaining */
+	SA_AALG_ID_AES_XCBC       /* AES Extended Cipher Block Chaining */
+};
+
+/*
+ * Mode control engine algorithms used to index the
+ * mode control instruction tables
+ */
+enum sa_eng_algo_id {
+	SA_ENG_ALGO_ECB = 0,
+	SA_ENG_ALGO_CBC,
+	SA_ENG_ALGO_CFB,
+	SA_ENG_ALGO_OFB,
+	SA_ENG_ALGO_CTR,
+	SA_ENG_ALGO_F8,
+	SA_ENG_ALGO_F8F9,
+	SA_ENG_ALGO_GCM,
+	SA_ENG_ALGO_GMAC,
+	SA_ENG_ALGO_CCM,
+	SA_ENG_ALGO_CMAC,
+	SA_ENG_ALGO_CBCMAC,
+	SA_NUM_ENG_ALGOS
+};
+
+/**
+ * struct sa_eng_info: Security accelerator engine info
+ * @eng_id: Engine ID
+ * @sc_size: security context size
+ */
+struct sa_eng_info {
+	u8	eng_id;
+	u16	sc_size;
+};
+
+#endif /* _K3_SA2UL_ */