Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1309 insertions, 0 deletions

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
new file mode 100644
index 000000000..474d3ba8e
--- /dev/null
+++ b/drivers/dma/sprd-dma.c
@@ -0,0 +1,1309 @@
+/*
+ * Copyright (C) 2017 Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/dma/sprd-dma.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_dma.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+
+#include "virt-dma.h"
+
+#define SPRD_DMA_CHN_REG_OFFSET		0x1000
+#define SPRD_DMA_CHN_REG_LENGTH		0x40
+#define SPRD_DMA_MEMCPY_MIN_SIZE	64
+
+/* DMA global registers definition */
+#define SPRD_DMA_GLB_PAUSE		0x0
+#define SPRD_DMA_GLB_FRAG_WAIT		0x4
+#define SPRD_DMA_GLB_REQ_PEND0_EN	0x8
+#define SPRD_DMA_GLB_REQ_PEND1_EN	0xc
+#define SPRD_DMA_GLB_INT_RAW_STS	0x10
+#define SPRD_DMA_GLB_INT_MSK_STS	0x14
+#define SPRD_DMA_GLB_REQ_STS		0x18
+#define SPRD_DMA_GLB_CHN_EN_STS		0x1c
+#define SPRD_DMA_GLB_DEBUG_STS		0x20
+#define SPRD_DMA_GLB_ARB_SEL_STS	0x24
+#define SPRD_DMA_GLB_2STAGE_GRP1	0x28
+#define SPRD_DMA_GLB_2STAGE_GRP2	0x2c
+#define SPRD_DMA_GLB_REQ_UID(uid)	(0x4 * ((uid) - 1))
+#define SPRD_DMA_GLB_REQ_UID_OFFSET	0x2000
+
+/* DMA channel registers definition */
+#define SPRD_DMA_CHN_PAUSE		0x0
+#define SPRD_DMA_CHN_REQ		0x4
+#define SPRD_DMA_CHN_CFG		0x8
+#define SPRD_DMA_CHN_INTC		0xc
+#define SPRD_DMA_CHN_SRC_ADDR		0x10
+#define SPRD_DMA_CHN_DES_ADDR		0x14
+#define SPRD_DMA_CHN_FRG_LEN		0x18
+#define SPRD_DMA_CHN_BLK_LEN		0x1c
+#define SPRD_DMA_CHN_TRSC_LEN		0x20
+#define SPRD_DMA_CHN_TRSF_STEP		0x24
+#define SPRD_DMA_CHN_WARP_PTR		0x28
+#define SPRD_DMA_CHN_WARP_TO		0x2c
+#define SPRD_DMA_CHN_LLIST_PTR		0x30
+#define SPRD_DMA_CHN_FRAG_STEP		0x34
+#define SPRD_DMA_CHN_SRC_BLK_STEP	0x38
+#define SPRD_DMA_CHN_DES_BLK_STEP	0x3c
+
+/* SPRD_DMA_GLB_2STAGE_GRP register definition */
+#define SPRD_DMA_GLB_2STAGE_EN		BIT(24)
+#define SPRD_DMA_GLB_CHN_INT_MASK	GENMASK(23, 20)
+#define SPRD_DMA_GLB_DEST_INT		BIT(22)
+#define SPRD_DMA_GLB_SRC_INT		BIT(20)
+#define SPRD_DMA_GLB_LIST_DONE_TRG	BIT(19)
+#define SPRD_DMA_GLB_TRANS_DONE_TRG	BIT(18)
+#define SPRD_DMA_GLB_BLOCK_DONE_TRG	BIT(17)
+#define SPRD_DMA_GLB_FRAG_DONE_TRG	BIT(16)
+#define SPRD_DMA_GLB_TRG_OFFSET		16
+#define SPRD_DMA_GLB_DEST_CHN_MASK	GENMASK(13, 8)
+#define SPRD_DMA_GLB_DEST_CHN_OFFSET	8
+#define SPRD_DMA_GLB_SRC_CHN_MASK	GENMASK(5, 0)
+
+/* SPRD_DMA_CHN_INTC register definition */
+#define SPRD_DMA_INT_MASK		GENMASK(4, 0)
+#define SPRD_DMA_INT_CLR_OFFSET		24
+#define SPRD_DMA_FRAG_INT_EN		BIT(0)
+#define SPRD_DMA_BLK_INT_EN		BIT(1)
+#define SPRD_DMA_TRANS_INT_EN		BIT(2)
+#define SPRD_DMA_LIST_INT_EN		BIT(3)
+#define SPRD_DMA_CFG_ERR_INT_EN		BIT(4)
+
+/* SPRD_DMA_CHN_CFG register definition */
+#define SPRD_DMA_CHN_EN			BIT(0)
+#define SPRD_DMA_LINKLIST_EN		BIT(4)
+#define SPRD_DMA_WAIT_BDONE_OFFSET	24
+#define SPRD_DMA_DONOT_WAIT_BDONE	1
+
+/* SPRD_DMA_CHN_REQ register definition */
+#define SPRD_DMA_REQ_EN			BIT(0)
+
+/* SPRD_DMA_CHN_PAUSE register definition */
+#define SPRD_DMA_PAUSE_EN		BIT(0)
+#define SPRD_DMA_PAUSE_STS		BIT(2)
+#define SPRD_DMA_PAUSE_CNT		0x2000
+
+/* DMA_CHN_WARP_* register definition */
+#define SPRD_DMA_HIGH_ADDR_MASK		GENMASK(31, 28)
+#define SPRD_DMA_LOW_ADDR_MASK		GENMASK(31, 0)
+#define SPRD_DMA_WRAP_ADDR_MASK		GENMASK(27, 0)
+#define SPRD_DMA_HIGH_ADDR_OFFSET	4
+
+/* SPRD_DMA_CHN_INTC register definition */
+#define SPRD_DMA_FRAG_INT_STS		BIT(16)
+#define SPRD_DMA_BLK_INT_STS		BIT(17)
+#define SPRD_DMA_TRSC_INT_STS		BIT(18)
+#define SPRD_DMA_LIST_INT_STS		BIT(19)
+#define SPRD_DMA_CFGERR_INT_STS		BIT(20)
+#define SPRD_DMA_CHN_INT_STS					\
+	(SPRD_DMA_FRAG_INT_STS | SPRD_DMA_BLK_INT_STS |		\
+	 SPRD_DMA_TRSC_INT_STS | SPRD_DMA_LIST_INT_STS |	\
+	 SPRD_DMA_CFGERR_INT_STS)
+
+/* SPRD_DMA_CHN_FRG_LEN register definition */
+#define SPRD_DMA_SRC_DATAWIDTH_OFFSET	30
+#define SPRD_DMA_DES_DATAWIDTH_OFFSET	28
+#define SPRD_DMA_SWT_MODE_OFFSET	26
+#define SPRD_DMA_REQ_MODE_OFFSET	24
+#define SPRD_DMA_REQ_MODE_MASK		GENMASK(1, 0)
+#define SPRD_DMA_WRAP_SEL_DEST		BIT(23)
+#define SPRD_DMA_WRAP_EN		BIT(22)
+#define SPRD_DMA_FIX_SEL_OFFSET		21
+#define SPRD_DMA_FIX_EN_OFFSET		20
+#define SPRD_DMA_LLIST_END		BIT(19)
+#define SPRD_DMA_FRG_LEN_MASK		GENMASK(16, 0)
+
+/* SPRD_DMA_CHN_BLK_LEN register definition */
+#define SPRD_DMA_BLK_LEN_MASK		GENMASK(16, 0)
+
+/* SPRD_DMA_CHN_TRSC_LEN register definition */
+#define SPRD_DMA_TRSC_LEN_MASK		GENMASK(27, 0)
+
+/* SPRD_DMA_CHN_TRSF_STEP register definition */
+#define SPRD_DMA_DEST_TRSF_STEP_OFFSET	16
+#define SPRD_DMA_SRC_TRSF_STEP_OFFSET	0
+#define SPRD_DMA_TRSF_STEP_MASK		GENMASK(15, 0)
+
+/* SPRD DMA_SRC_BLK_STEP register definition */
+#define SPRD_DMA_LLIST_HIGH_MASK	GENMASK(31, 28)
+#define SPRD_DMA_LLIST_HIGH_SHIFT	28
+
+/* define DMA channel mode & trigger mode mask */
+#define SPRD_DMA_CHN_MODE_MASK		GENMASK(7, 0)
+#define SPRD_DMA_TRG_MODE_MASK		GENMASK(7, 0)
+#define SPRD_DMA_INT_TYPE_MASK		GENMASK(7, 0)
+
+/* define the DMA transfer step type */
+#define SPRD_DMA_NONE_STEP		0
+#define SPRD_DMA_BYTE_STEP		1
+#define SPRD_DMA_SHORT_STEP		2
+#define SPRD_DMA_WORD_STEP		4
+#define SPRD_DMA_DWORD_STEP		8
+
+#define SPRD_DMA_SOFTWARE_UID		0
+
+/* dma data width values */
+enum sprd_dma_datawidth {
+	SPRD_DMA_DATAWIDTH_1_BYTE,
+	SPRD_DMA_DATAWIDTH_2_BYTES,
+	SPRD_DMA_DATAWIDTH_4_BYTES,
+	SPRD_DMA_DATAWIDTH_8_BYTES,
+};
+
+/* dma channel hardware configuration */
+struct sprd_dma_chn_hw {
+	u32 pause;
+	u32 req;
+	u32 cfg;
+	u32 intc;
+	u32 src_addr;
+	u32 des_addr;
+	u32 frg_len;
+	u32 blk_len;
+	u32 trsc_len;
+	u32 trsf_step;
+	u32 wrap_ptr;
+	u32 wrap_to;
+	u32 llist_ptr;
+	u32 frg_step;
+	u32 src_blk_step;
+	u32 des_blk_step;
+};
+
+/* dma request description */
+struct sprd_dma_desc {
+	struct virt_dma_desc	vd;
+	struct sprd_dma_chn_hw	chn_hw;
+	enum dma_transfer_direction dir;
+};
+
+/* dma channel description */
+struct sprd_dma_chn {
+	struct virt_dma_chan	vc;
+	void __iomem		*chn_base;
+	struct sprd_dma_linklist	linklist;
+	struct dma_slave_config	slave_cfg;
+	u32			chn_num;
+	u32			dev_id;
+	enum sprd_dma_chn_mode	chn_mode;
+	enum sprd_dma_trg_mode	trg_mode;
+	enum sprd_dma_int_type	int_type;
+	struct sprd_dma_desc	*cur_desc;
+};
+
+/* SPRD dma device */
+struct sprd_dma_dev {
+	struct dma_device	dma_dev;
+	void __iomem		*glb_base;
+	struct clk		*clk;
+	struct clk		*ashb_clk;
+	int			irq;
+	u32			total_chns;
+	struct sprd_dma_chn	channels[];
+};
+
+static void sprd_dma_free_desc(struct virt_dma_desc *vd);
+static bool sprd_dma_filter_fn(struct dma_chan *chan, void *param);
+static struct of_dma_filter_info sprd_dma_info = {
+	.filter_fn = sprd_dma_filter_fn,
+};
+
+static inline struct sprd_dma_chn *to_sprd_dma_chan(struct dma_chan *c)
+{
+	return container_of(c, struct sprd_dma_chn, vc.chan);
+}
+
+static inline struct sprd_dma_dev *to_sprd_dma_dev(struct dma_chan *c)
+{
+	struct sprd_dma_chn *schan = to_sprd_dma_chan(c);
+
+	return container_of(schan, struct sprd_dma_dev, channels[c->chan_id]);
+}
+
+static inline struct sprd_dma_desc *to_sprd_dma_desc(struct virt_dma_desc *vd)
+{
+	return container_of(vd, struct sprd_dma_desc, vd);
+}
+
+static void sprd_dma_glb_update(struct sprd_dma_dev *sdev, u32 reg,
+				u32 mask, u32 val)
+{
+	u32 orig = readl(sdev->glb_base + reg);
+	u32 tmp;
+
+	tmp = (orig & ~mask) | val;
+	writel(tmp, sdev->glb_base + reg);
+}
+
+static void sprd_dma_chn_update(struct sprd_dma_chn *schan, u32 reg,
+				u32 mask, u32 val)
+{
+	u32 orig = readl(schan->chn_base + reg);
+	u32 tmp;
+
+	tmp = (orig & ~mask) | val;
+	writel(tmp, schan->chn_base + reg);
+}
+
+static int sprd_dma_enable(struct sprd_dma_dev *sdev)
+{
+	int ret;
+
+	ret = clk_prepare_enable(sdev->clk);
+	if (ret)
+		return ret;
+
+	/*
+	 * The ashb_clk is optional and only for AGCP DMA controller, so we
+	 * need add one condition to check if the ashb_clk need enable.
+	 */
+	if (!IS_ERR(sdev->ashb_clk))
+		ret = clk_prepare_enable(sdev->ashb_clk);
+
+	return ret;
+}
+
+static void sprd_dma_disable(struct sprd_dma_dev *sdev)
+{
+	clk_disable_unprepare(sdev->clk);
+
+	/*
+	 * Need to check if we need disable the optional ashb_clk for AGCP DMA.
+	 */
+	if (!IS_ERR(sdev->ashb_clk))
+		clk_disable_unprepare(sdev->ashb_clk);
+}
+
+static void sprd_dma_set_uid(struct sprd_dma_chn *schan)
+{
+	struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
+	u32 dev_id = schan->dev_id;
+
+	if (dev_id != SPRD_DMA_SOFTWARE_UID) {
+		u32 uid_offset = SPRD_DMA_GLB_REQ_UID_OFFSET +
+				 SPRD_DMA_GLB_REQ_UID(dev_id);
+
+		writel(schan->chn_num + 1, sdev->glb_base + uid_offset);
+	}
+}
+
+static void sprd_dma_unset_uid(struct sprd_dma_chn *schan)
+{
+	struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
+	u32 dev_id = schan->dev_id;
+
+	if (dev_id != SPRD_DMA_SOFTWARE_UID) {
+		u32 uid_offset = SPRD_DMA_GLB_REQ_UID_OFFSET +
+				 SPRD_DMA_GLB_REQ_UID(dev_id);
+
+		writel(0, sdev->glb_base + uid_offset);
+	}
+}
+
+static void sprd_dma_clear_int(struct sprd_dma_chn *schan)
+{
+	sprd_dma_chn_update(schan, SPRD_DMA_CHN_INTC,
+			    SPRD_DMA_INT_MASK << SPRD_DMA_INT_CLR_OFFSET,
+			    SPRD_DMA_INT_MASK << SPRD_DMA_INT_CLR_OFFSET);
+}
+
+static void sprd_dma_enable_chn(struct sprd_dma_chn *schan)
+{
+	sprd_dma_chn_update(schan, SPRD_DMA_CHN_CFG, SPRD_DMA_CHN_EN,
+			    SPRD_DMA_CHN_EN);
+}
+
+static void sprd_dma_disable_chn(struct sprd_dma_chn *schan)
+{
+	sprd_dma_chn_update(schan, SPRD_DMA_CHN_CFG, SPRD_DMA_CHN_EN, 0);
+}
+
+static void sprd_dma_soft_request(struct sprd_dma_chn *schan)
+{
+	sprd_dma_chn_update(schan, SPRD_DMA_CHN_REQ, SPRD_DMA_REQ_EN,
+			    SPRD_DMA_REQ_EN);
+}
+
+static void sprd_dma_pause_resume(struct sprd_dma_chn *schan, bool enable)
+{
+	struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
+	u32 pause, timeout = SPRD_DMA_PAUSE_CNT;
+
+	if (enable) {
+		sprd_dma_chn_update(schan, SPRD_DMA_CHN_PAUSE,
+				    SPRD_DMA_PAUSE_EN, SPRD_DMA_PAUSE_EN);
+
+		do {
+			pause = readl(schan->chn_base + SPRD_DMA_CHN_PAUSE);
+			if (pause & SPRD_DMA_PAUSE_STS)
+				break;
+
+			cpu_relax();
+		} while (--timeout > 0);
+
+		if (!timeout)
+			dev_warn(sdev->dma_dev.dev,
+				 "pause dma controller timeout\n");
+	} else {
+		sprd_dma_chn_update(schan, SPRD_DMA_CHN_PAUSE,
+				    SPRD_DMA_PAUSE_EN, 0);
+	}
+}
+
+static void sprd_dma_stop_and_disable(struct sprd_dma_chn *schan)
+{
+	u32 cfg = readl(schan->chn_base + SPRD_DMA_CHN_CFG);
+
+	if (!(cfg & SPRD_DMA_CHN_EN))
+		return;
+
+	sprd_dma_pause_resume(schan, true);
+	sprd_dma_disable_chn(schan);
+}
+
+static unsigned long sprd_dma_get_src_addr(struct sprd_dma_chn *schan)
+{
+	unsigned long addr, addr_high;
+
+	addr = readl(schan->chn_base + SPRD_DMA_CHN_SRC_ADDR);
+	addr_high = readl(schan->chn_base + SPRD_DMA_CHN_WARP_PTR) &
+		    SPRD_DMA_HIGH_ADDR_MASK;
+
+	return addr | (addr_high << SPRD_DMA_HIGH_ADDR_OFFSET);
+}
+
+static unsigned long sprd_dma_get_dst_addr(struct sprd_dma_chn *schan)
+{
+	unsigned long addr, addr_high;
+
+	addr = readl(schan->chn_base + SPRD_DMA_CHN_DES_ADDR);
+	addr_high = readl(schan->chn_base + SPRD_DMA_CHN_WARP_TO) &
+		    SPRD_DMA_HIGH_ADDR_MASK;
+
+	return addr | (addr_high << SPRD_DMA_HIGH_ADDR_OFFSET);
+}
+
+static enum sprd_dma_int_type sprd_dma_get_int_type(struct sprd_dma_chn *schan)
+{
+	struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
+	u32 intc_sts = readl(schan->chn_base + SPRD_DMA_CHN_INTC) &
+		       SPRD_DMA_CHN_INT_STS;
+
+	switch (intc_sts) {
+	case SPRD_DMA_CFGERR_INT_STS:
+		return SPRD_DMA_CFGERR_INT;
+
+	case SPRD_DMA_LIST_INT_STS:
+		return SPRD_DMA_LIST_INT;
+
+	case SPRD_DMA_TRSC_INT_STS:
+		return SPRD_DMA_TRANS_INT;
+
+	case SPRD_DMA_BLK_INT_STS:
+		return SPRD_DMA_BLK_INT;
+
+	case SPRD_DMA_FRAG_INT_STS:
+		return SPRD_DMA_FRAG_INT;
+
+	default:
+		dev_warn(sdev->dma_dev.dev, "incorrect dma interrupt type\n");
+		return SPRD_DMA_NO_INT;
+	}
+}
+
+static enum sprd_dma_req_mode sprd_dma_get_req_type(struct sprd_dma_chn *schan)
+{
+	u32 frag_reg = readl(schan->chn_base + SPRD_DMA_CHN_FRG_LEN);
+
+	return (frag_reg >> SPRD_DMA_REQ_MODE_OFFSET) & SPRD_DMA_REQ_MODE_MASK;
+}
+
+static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)
+{
+	struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
+	u32 val, chn = schan->chn_num + 1;
+
+	switch (schan->chn_mode) {
+	case SPRD_DMA_SRC_CHN0:
+		val = chn & SPRD_DMA_GLB_SRC_CHN_MASK;
+		val |= BIT(schan->trg_mode - 1) << SPRD_DMA_GLB_TRG_OFFSET;
+		val |= SPRD_DMA_GLB_2STAGE_EN;
+		if (schan->int_type != SPRD_DMA_NO_INT)
+			val |= SPRD_DMA_GLB_SRC_INT;
+
+		sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP1, val, val);
+		break;
+
+	case SPRD_DMA_SRC_CHN1:
+		val = chn & SPRD_DMA_GLB_SRC_CHN_MASK;
+		val |= BIT(schan->trg_mode - 1) << SPRD_DMA_GLB_TRG_OFFSET;
+		val |= SPRD_DMA_GLB_2STAGE_EN;
+		if (schan->int_type != SPRD_DMA_NO_INT)
+			val |= SPRD_DMA_GLB_SRC_INT;
+
+		sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP2, val, val);
+		break;
+
+	case SPRD_DMA_DST_CHN0:
+		val = (chn << SPRD_DMA_GLB_DEST_CHN_OFFSET) &
+			SPRD_DMA_GLB_DEST_CHN_MASK;
+		val |= SPRD_DMA_GLB_2STAGE_EN;
+		if (schan->int_type != SPRD_DMA_NO_INT)
+			val |= SPRD_DMA_GLB_DEST_INT;
+
+		sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP1, val, val);
+		break;
+
+	case SPRD_DMA_DST_CHN1:
+		val = (chn << SPRD_DMA_GLB_DEST_CHN_OFFSET) &
+			SPRD_DMA_GLB_DEST_CHN_MASK;
+		val |= SPRD_DMA_GLB_2STAGE_EN;
+		if (schan->int_type != SPRD_DMA_NO_INT)
+			val |= SPRD_DMA_GLB_DEST_INT;
+
+		sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP2, val, val);
+		break;
+
+	default:
+		dev_err(sdev->dma_dev.dev, "invalid channel mode setting %d\n",
+			schan->chn_mode);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void sprd_dma_set_pending(struct sprd_dma_chn *schan, bool enable)
+{
+	struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
+	u32 reg, val, req_id;
+
+	if (schan->dev_id == SPRD_DMA_SOFTWARE_UID)
+		return;
+
+	/* The DMA request id always starts from 0. */
+	req_id = schan->dev_id - 1;
+
+	if (req_id < 32) {
+		reg = SPRD_DMA_GLB_REQ_PEND0_EN;
+		val = BIT(req_id);
+	} else {
+		reg = SPRD_DMA_GLB_REQ_PEND1_EN;
+		val = BIT(req_id - 32);
+	}
+
+	sprd_dma_glb_update(sdev, reg, val, enable ? val : 0);
+}
+
+static void sprd_dma_set_chn_config(struct sprd_dma_chn *schan,
+				    struct sprd_dma_desc *sdesc)
+{
+	struct sprd_dma_chn_hw *cfg = &sdesc->chn_hw;
+
+	writel(cfg->pause, schan->chn_base + SPRD_DMA_CHN_PAUSE);
+	writel(cfg->cfg, schan->chn_base + SPRD_DMA_CHN_CFG);
+	writel(cfg->intc, schan->chn_base + SPRD_DMA_CHN_INTC);
+	writel(cfg->src_addr, schan->chn_base + SPRD_DMA_CHN_SRC_ADDR);
+	writel(cfg->des_addr, schan->chn_base + SPRD_DMA_CHN_DES_ADDR);
+	writel(cfg->frg_len, schan->chn_base + SPRD_DMA_CHN_FRG_LEN);
+	writel(cfg->blk_len, schan->chn_base + SPRD_DMA_CHN_BLK_LEN);
+	writel(cfg->trsc_len, schan->chn_base + SPRD_DMA_CHN_TRSC_LEN);
+	writel(cfg->trsf_step, schan->chn_base + SPRD_DMA_CHN_TRSF_STEP);
+	writel(cfg->wrap_ptr, schan->chn_base + SPRD_DMA_CHN_WARP_PTR);
+	writel(cfg->wrap_to, schan->chn_base + SPRD_DMA_CHN_WARP_TO);
+	writel(cfg->llist_ptr, schan->chn_base + SPRD_DMA_CHN_LLIST_PTR);
+	writel(cfg->frg_step, schan->chn_base + SPRD_DMA_CHN_FRAG_STEP);
+	writel(cfg->src_blk_step, schan->chn_base + SPRD_DMA_CHN_SRC_BLK_STEP);
+	writel(cfg->des_blk_step, schan->chn_base + SPRD_DMA_CHN_DES_BLK_STEP);
+	writel(cfg->req, schan->chn_base + SPRD_DMA_CHN_REQ);
+}
+
+static void sprd_dma_start(struct sprd_dma_chn *schan)
+{
+	struct virt_dma_desc *vd = vchan_next_desc(&schan->vc);
+
+	if (!vd)
+		return;
+
+	list_del(&vd->node);
+	schan->cur_desc = to_sprd_dma_desc(vd);
+
+	/*
+	 * Set 2-stage configuration if the channel starts one 2-stage
+	 * transfer.
+	 */
+	if (schan->chn_mode && sprd_dma_set_2stage_config(schan))
+		return;
+
+	/*
+	 * Copy the DMA configuration from DMA descriptor to this hardware
+	 * channel.
+	 */
+	sprd_dma_set_chn_config(schan, schan->cur_desc);
+	sprd_dma_set_uid(schan);
+	sprd_dma_set_pending(schan, true);
+	sprd_dma_enable_chn(schan);
+
+	if (schan->dev_id == SPRD_DMA_SOFTWARE_UID &&
+	    schan->chn_mode != SPRD_DMA_DST_CHN0 &&
+	    schan->chn_mode != SPRD_DMA_DST_CHN1)
+		sprd_dma_soft_request(schan);
+}
+
+static void sprd_dma_stop(struct sprd_dma_chn *schan)
+{
+	sprd_dma_stop_and_disable(schan);
+	sprd_dma_set_pending(schan, false);
+	sprd_dma_unset_uid(schan);
+	sprd_dma_clear_int(schan);
+	schan->cur_desc = NULL;
+}
+
+static bool sprd_dma_check_trans_done(struct sprd_dma_desc *sdesc,
+				      enum sprd_dma_int_type int_type,
+				      enum sprd_dma_req_mode req_mode)
+{
+	if (int_type == SPRD_DMA_NO_INT)
+		return false;
+
+	if (int_type >= req_mode + 1)
+		return true;
+	else
+		return false;
+}
+
+static irqreturn_t dma_irq_handle(int irq, void *dev_id)
+{
+	struct sprd_dma_dev *sdev = (struct sprd_dma_dev *)dev_id;
+	u32 irq_status = readl(sdev->glb_base + SPRD_DMA_GLB_INT_MSK_STS);
+	struct sprd_dma_chn *schan;
+	struct sprd_dma_desc *sdesc;
+	enum sprd_dma_req_mode req_type;
+	enum sprd_dma_int_type int_type;
+	bool trans_done = false, cyclic = false;
+	u32 i;
+
+	while (irq_status) {
+		i = __ffs(irq_status);
+		irq_status &= (irq_status - 1);
+		schan = &sdev->channels[i];
+
+		spin_lock(&schan->vc.lock);
+
+		sdesc = schan->cur_desc;
+		if (!sdesc) {
+			spin_unlock(&schan->vc.lock);
+			return IRQ_HANDLED;
+		}
+
+		int_type = sprd_dma_get_int_type(schan);
+		req_type = sprd_dma_get_req_type(schan);
+		sprd_dma_clear_int(schan);
+
+		/* cyclic mode schedule callback */
+		cyclic = schan->linklist.phy_addr ? true : false;
+		if (cyclic == true) {
+			vchan_cyclic_callback(&sdesc->vd);
+		} else {
+			/* Check if the dma request descriptor is done. */
+			trans_done = sprd_dma_check_trans_done(sdesc, int_type,
+							       req_type);
+			if (trans_done == true) {
+				vchan_cookie_complete(&sdesc->vd);
+				schan->cur_desc = NULL;
+				sprd_dma_start(schan);
+			}
+		}
+		spin_unlock(&schan->vc.lock);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int sprd_dma_alloc_chan_resources(struct dma_chan *chan)
+{
+	return pm_runtime_get_sync(chan->device->dev);
+}
+
+static void sprd_dma_free_chan_resources(struct dma_chan *chan)
+{
+	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+	struct virt_dma_desc *cur_vd = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&schan->vc.lock, flags);
+	if (schan->cur_desc)
+		cur_vd = &schan->cur_desc->vd;
+
+	sprd_dma_stop(schan);
+	spin_unlock_irqrestore(&schan->vc.lock, flags);
+
+	if (cur_vd)
+		sprd_dma_free_desc(cur_vd);
+
+	vchan_free_chan_resources(&schan->vc);
+	pm_runtime_put(chan->device->dev);
+}
+
+static enum dma_status sprd_dma_tx_status(struct dma_chan *chan,
+					  dma_cookie_t cookie,
+					  struct dma_tx_state *txstate)
+{
+	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+	struct virt_dma_desc *vd;
+	unsigned long flags;
+	enum dma_status ret;
+	u32 pos;
+
+	ret = dma_cookie_status(chan, cookie, txstate);
+	if (ret == DMA_COMPLETE || !txstate)
+		return ret;
+
+	spin_lock_irqsave(&schan->vc.lock, flags);
+	vd = vchan_find_desc(&schan->vc, cookie);
+	if (vd) {
+		struct sprd_dma_desc *sdesc = to_sprd_dma_desc(vd);
+		struct sprd_dma_chn_hw *hw = &sdesc->chn_hw;
+
+		if (hw->trsc_len > 0)
+			pos = hw->trsc_len;
+		else if (hw->blk_len > 0)
+			pos = hw->blk_len;
+		else if (hw->frg_len > 0)
+			pos = hw->frg_len;
+		else
+			pos = 0;
+	} else if (schan->cur_desc && schan->cur_desc->vd.tx.cookie == cookie) {
+		struct sprd_dma_desc *sdesc = schan->cur_desc;
+
+		if (sdesc->dir == DMA_DEV_TO_MEM)
+			pos = sprd_dma_get_dst_addr(schan);
+		else
+			pos = sprd_dma_get_src_addr(schan);
+	} else {
+		pos = 0;
+	}
+	spin_unlock_irqrestore(&schan->vc.lock, flags);
+
+	dma_set_residue(txstate, pos);
+	return ret;
+}
+
+static void sprd_dma_issue_pending(struct dma_chan *chan)
+{
+	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&schan->vc.lock, flags);
+	if (vchan_issue_pending(&schan->vc) && !schan->cur_desc)
+		sprd_dma_start(schan);
+	spin_unlock_irqrestore(&schan->vc.lock, flags);
+}
+
+static int sprd_dma_get_datawidth(enum dma_slave_buswidth buswidth)
+{
+	switch (buswidth) {
+	case DMA_SLAVE_BUSWIDTH_1_BYTE:
+	case DMA_SLAVE_BUSWIDTH_2_BYTES:
+	case DMA_SLAVE_BUSWIDTH_4_BYTES:
+	case DMA_SLAVE_BUSWIDTH_8_BYTES:
+		return ffs(buswidth) - 1;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sprd_dma_get_step(enum dma_slave_buswidth buswidth)
+{
+	switch (buswidth) {
+	case DMA_SLAVE_BUSWIDTH_1_BYTE:
+	case DMA_SLAVE_BUSWIDTH_2_BYTES:
+	case DMA_SLAVE_BUSWIDTH_4_BYTES:
+	case DMA_SLAVE_BUSWIDTH_8_BYTES:
+		return buswidth;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sprd_dma_fill_desc(struct dma_chan *chan,
+			      struct sprd_dma_chn_hw *hw,
+			      unsigned int sglen, int sg_index,
+			      dma_addr_t src, dma_addr_t dst, u32 len,
+			      enum dma_transfer_direction dir,
+			      unsigned long flags,
+			      struct dma_slave_config *slave_cfg)
+{
+	struct sprd_dma_dev *sdev = to_sprd_dma_dev(chan);
+	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+	enum sprd_dma_chn_mode chn_mode = schan->chn_mode;
+	u32 req_mode = (flags >> SPRD_DMA_REQ_SHIFT) & SPRD_DMA_REQ_MODE_MASK;
+	u32 int_mode = flags & SPRD_DMA_INT_MASK;
+	int src_datawidth, dst_datawidth, src_step, dst_step;
+	u32 temp, fix_mode = 0, fix_en = 0;
+	phys_addr_t llist_ptr;
+
+	if (dir == DMA_MEM_TO_DEV) {
+		src_step = sprd_dma_get_step(slave_cfg->src_addr_width);
+		if (src_step < 0) {
+			dev_err(sdev->dma_dev.dev, "invalid source step\n");
+			return src_step;
+		}
+
+		/*
+		 * For 2-stage transfer, destination channel step can not be 0,
+		 * since destination device is AON IRAM.
+		 */
+		if (chn_mode == SPRD_DMA_DST_CHN0 ||
+		    chn_mode == SPRD_DMA_DST_CHN1)
+			dst_step = src_step;
+		else
+			dst_step = SPRD_DMA_NONE_STEP;
+	} else {
+		dst_step = sprd_dma_get_step(slave_cfg->dst_addr_width);
+		if (dst_step < 0) {
+			dev_err(sdev->dma_dev.dev, "invalid destination step\n");
+			return dst_step;
+		}
+		src_step = SPRD_DMA_NONE_STEP;
+	}
+
+	src_datawidth = sprd_dma_get_datawidth(slave_cfg->src_addr_width);
+	if (src_datawidth < 0) {
+		dev_err(sdev->dma_dev.dev, "invalid source datawidth\n");
+		return src_datawidth;
+	}
+
+	dst_datawidth = sprd_dma_get_datawidth(slave_cfg->dst_addr_width);
+	if (dst_datawidth < 0) {
+		dev_err(sdev->dma_dev.dev, "invalid destination datawidth\n");
+		return dst_datawidth;
+	}
+
+	hw->cfg = SPRD_DMA_DONOT_WAIT_BDONE << SPRD_DMA_WAIT_BDONE_OFFSET;
+
+	/*
+	 * wrap_ptr and wrap_to will save the high 4 bits source address and
+	 * destination address.
+	 */
+	hw->wrap_ptr = (src >> SPRD_DMA_HIGH_ADDR_OFFSET) & SPRD_DMA_HIGH_ADDR_MASK;
+	hw->wrap_to = (dst >> SPRD_DMA_HIGH_ADDR_OFFSET) & SPRD_DMA_HIGH_ADDR_MASK;
+	hw->src_addr = src & SPRD_DMA_LOW_ADDR_MASK;
+	hw->des_addr = dst & SPRD_DMA_LOW_ADDR_MASK;
+
+	/*
+	 * If the src step and dst step both are 0 or both are not 0, that means
+	 * we can not enable the fix mode. If one is 0 and another one is not,
+	 * we can enable the fix mode.
+	 */
+	if ((src_step != 0 && dst_step != 0) || (src_step | dst_step) == 0) {
+		fix_en = 0;
+	} else {
+		fix_en = 1;
+		if (src_step)
+			fix_mode = 1;
+		else
+			fix_mode = 0;
+	}
+
+	hw->intc = int_mode | SPRD_DMA_CFG_ERR_INT_EN;
+
+	temp = src_datawidth << SPRD_DMA_SRC_DATAWIDTH_OFFSET;
+	temp |= dst_datawidth << SPRD_DMA_DES_DATAWIDTH_OFFSET;
+	temp |= req_mode << SPRD_DMA_REQ_MODE_OFFSET;
+	temp |= fix_mode << SPRD_DMA_FIX_SEL_OFFSET;
+	temp |= fix_en << SPRD_DMA_FIX_EN_OFFSET;
+	temp |= schan->linklist.wrap_addr ?
+		SPRD_DMA_WRAP_EN | SPRD_DMA_WRAP_SEL_DEST : 0;
+	temp |= slave_cfg->src_maxburst & SPRD_DMA_FRG_LEN_MASK;
+	hw->frg_len = temp;
+
+	hw->blk_len = slave_cfg->src_maxburst & SPRD_DMA_BLK_LEN_MASK;
+	hw->trsc_len = len & SPRD_DMA_TRSC_LEN_MASK;
+
+	temp = (dst_step & SPRD_DMA_TRSF_STEP_MASK) << SPRD_DMA_DEST_TRSF_STEP_OFFSET;
+	temp |= (src_step & SPRD_DMA_TRSF_STEP_MASK) << SPRD_DMA_SRC_TRSF_STEP_OFFSET;
+	hw->trsf_step = temp;
+
+	/* link-list configuration */
+	if (schan->linklist.phy_addr) {
+		hw->cfg |= SPRD_DMA_LINKLIST_EN;
+
+		/* link-list index */
+		temp = sglen ? (sg_index + 1) % sglen : 0;
+
+		/* Next link-list configuration's physical address offset */
+		temp = temp * sizeof(*hw) + SPRD_DMA_CHN_SRC_ADDR;
+		/*
+		 * Set the link-list pointer point to next link-list
+		 * configuration's physical address.
+		 */
+		llist_ptr = schan->linklist.phy_addr + temp;
+		hw->llist_ptr = lower_32_bits(llist_ptr);
+		hw->src_blk_step = (upper_32_bits(llist_ptr) << SPRD_DMA_LLIST_HIGH_SHIFT) &
+			SPRD_DMA_LLIST_HIGH_MASK;
+
+		if (schan->linklist.wrap_addr) {
+			hw->wrap_ptr |= schan->linklist.wrap_addr &
+				SPRD_DMA_WRAP_ADDR_MASK;
+			hw->wrap_to |= dst & SPRD_DMA_WRAP_ADDR_MASK;
+		}
+	} else {
+		hw->llist_ptr = 0;
+		hw->src_blk_step = 0;
+	}
+
+	hw->frg_step = 0;
+	hw->des_blk_step = 0;
+	return 0;
+}
+
+static int sprd_dma_fill_linklist_desc(struct dma_chan *chan,
+				       unsigned int sglen, int sg_index,
+				       dma_addr_t src, dma_addr_t dst, u32 len,
+				       enum dma_transfer_direction dir,
+				       unsigned long flags,
+				       struct dma_slave_config *slave_cfg)
+{
+	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+	struct sprd_dma_chn_hw *hw;
+
+	if (!schan->linklist.virt_addr)
+		return -EINVAL;
+
+	hw = (struct sprd_dma_chn_hw *)(schan->linklist.virt_addr +
+					sg_index * sizeof(*hw));
+
+	return sprd_dma_fill_desc(chan, hw, sglen, sg_index, src, dst, len,
+				  dir, flags, slave_cfg);
+}
+
+static struct dma_async_tx_descriptor *
+sprd_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+			 size_t len, unsigned long flags)
+{
+	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+	struct sprd_dma_desc *sdesc;
+	struct sprd_dma_chn_hw *hw;
+	enum sprd_dma_datawidth datawidth;
+	u32 step, temp;
+
+	sdesc = kzalloc(sizeof(*sdesc), GFP_NOWAIT);
+	if (!sdesc)
+		return NULL;
+
+	hw = &sdesc->chn_hw;
+
+	hw->cfg = SPRD_DMA_DONOT_WAIT_BDONE << SPRD_DMA_WAIT_BDONE_OFFSET;
+	hw->intc = SPRD_DMA_TRANS_INT | SPRD_DMA_CFG_ERR_INT_EN;
+	hw->src_addr = src & SPRD_DMA_LOW_ADDR_MASK;
+	hw->des_addr = dest & SPRD_DMA_LOW_ADDR_MASK;
+	hw->wrap_ptr = (src >> SPRD_DMA_HIGH_ADDR_OFFSET) &
+		SPRD_DMA_HIGH_ADDR_MASK;
+	hw->wrap_to = (dest >> SPRD_DMA_HIGH_ADDR_OFFSET) &
+		SPRD_DMA_HIGH_ADDR_MASK;
+
+	if (IS_ALIGNED(len, 8)) {
+		datawidth = SPRD_DMA_DATAWIDTH_8_BYTES;
+		step = SPRD_DMA_DWORD_STEP;
+	} else if (IS_ALIGNED(len, 4)) {
+		datawidth = SPRD_DMA_DATAWIDTH_4_BYTES;
+		step = SPRD_DMA_WORD_STEP;
+	} else if (IS_ALIGNED(len, 2)) {
+		datawidth = SPRD_DMA_DATAWIDTH_2_BYTES;
+		step = SPRD_DMA_SHORT_STEP;
+	} else {
+		datawidth = SPRD_DMA_DATAWIDTH_1_BYTE;
+		step = SPRD_DMA_BYTE_STEP;
+	}
+
+	temp = datawidth << SPRD_DMA_SRC_DATAWIDTH_OFFSET;
+	temp |= datawidth << SPRD_DMA_DES_DATAWIDTH_OFFSET;
+	temp |= SPRD_DMA_TRANS_REQ << SPRD_DMA_REQ_MODE_OFFSET;
+	temp |= len & SPRD_DMA_FRG_LEN_MASK;
+	hw->frg_len = temp;
+
+	hw->blk_len = len & SPRD_DMA_BLK_LEN_MASK;
+	hw->trsc_len = len & SPRD_DMA_TRSC_LEN_MASK;
+
+	temp = (step & SPRD_DMA_TRSF_STEP_MASK) << SPRD_DMA_DEST_TRSF_STEP_OFFSET;
+	temp |= (step & SPRD_DMA_TRSF_STEP_MASK) << SPRD_DMA_SRC_TRSF_STEP_OFFSET;
+	hw->trsf_step = temp;
+
+	return vchan_tx_prep(&schan->vc, &sdesc->vd, flags);
+}
+
+static struct dma_async_tx_descriptor *
+sprd_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+		       unsigned int sglen, enum dma_transfer_direction dir,
+		       unsigned long flags, void *context)
+{
+	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+	struct dma_slave_config *slave_cfg = &schan->slave_cfg;
+	dma_addr_t src = 0, dst = 0;
+	dma_addr_t start_src = 0, start_dst = 0;
+	struct sprd_dma_desc *sdesc;
+	struct scatterlist *sg;
+	u32 len = 0;
+	int ret, i;
+
+	if (!is_slave_direction(dir))
+		return NULL;
+
+	if (context) {
+		struct sprd_dma_linklist *ll_cfg =
+			(struct sprd_dma_linklist *)context;
+
+		schan->linklist.phy_addr = ll_cfg->phy_addr;
+		schan->linklist.virt_addr = ll_cfg->virt_addr;
+		schan->linklist.wrap_addr = ll_cfg->wrap_addr;
+	} else {
+		schan->linklist.phy_addr = 0;
+		schan->linklist.virt_addr = 0;
+		schan->linklist.wrap_addr = 0;
+	}
+
+	/*
+	 * Set channel mode, interrupt mode and trigger mode for 2-stage
+	 * transfer.
+	 */
+	schan->chn_mode =
+		(flags >> SPRD_DMA_CHN_MODE_SHIFT) & SPRD_DMA_CHN_MODE_MASK;
+	schan->trg_mode =
+		(flags >> SPRD_DMA_TRG_MODE_SHIFT) & SPRD_DMA_TRG_MODE_MASK;
+	schan->int_type = flags & SPRD_DMA_INT_TYPE_MASK;
+
+	sdesc = kzalloc(sizeof(*sdesc), GFP_NOWAIT);
+	if (!sdesc)
+		return NULL;
+
+	sdesc->dir = dir;
+
+	for_each_sg(sgl, sg, sglen, i) {
+		len = sg_dma_len(sg);
+
+		if (dir == DMA_MEM_TO_DEV) {
+			src = sg_dma_address(sg);
+			dst = slave_cfg->dst_addr;
+		} else {
+			src = slave_cfg->src_addr;
+			dst = sg_dma_address(sg);
+		}
+
+		if (!i) {
+			start_src = src;
+			start_dst = dst;
+		}
+
+		/*
+		 * The link-list mode needs at least 2 link-list
+		 * configurations. If there is only one sg, it doesn't
+		 * need to fill the link-list configuration.
+		 */
+		if (sglen < 2)
+			break;
+
+		ret = sprd_dma_fill_linklist_desc(chan, sglen, i, src, dst, len,
+						  dir, flags, slave_cfg);
+		if (ret) {
+			kfree(sdesc);
+			return NULL;
+		}
+	}
+
+	ret = sprd_dma_fill_desc(chan, &sdesc->chn_hw, 0, 0, start_src,
+				 start_dst, len, dir, flags, slave_cfg);
+	if (ret) {
+		kfree(sdesc);
+		return NULL;
+	}
+
+	return vchan_tx_prep(&schan->vc, &sdesc->vd, flags);
+}
+
+static int sprd_dma_slave_config(struct dma_chan *chan,
+				 struct dma_slave_config *config)
+{
+	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+	struct dma_slave_config *slave_cfg = &schan->slave_cfg;
+
+	memcpy(slave_cfg, config, sizeof(*config));
+	return 0;
+}
+
+static int sprd_dma_pause(struct dma_chan *chan)
+{
+	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&schan->vc.lock, flags);
+	sprd_dma_pause_resume(schan, true);
+	spin_unlock_irqrestore(&schan->vc.lock, flags);
+
+	return 0;
+}
+
+static int sprd_dma_resume(struct dma_chan *chan)
+{
+	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&schan->vc.lock, flags);
+	sprd_dma_pause_resume(schan, false);
+	spin_unlock_irqrestore(&schan->vc.lock, flags);
+
+	return 0;
+}
+
+static int sprd_dma_terminate_all(struct dma_chan *chan)
+{
+	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+	struct virt_dma_desc *cur_vd = NULL;
+	unsigned long flags;
+	LIST_HEAD(head);
+
+	spin_lock_irqsave(&schan->vc.lock, flags);
+	if (schan->cur_desc)
+		cur_vd = &schan->cur_desc->vd;
+
+	sprd_dma_stop(schan);
+
+	vchan_get_all_descriptors(&schan->vc, &head);
+	spin_unlock_irqrestore(&schan->vc.lock, flags);
+
+	if (cur_vd)
+		sprd_dma_free_desc(cur_vd);
+
+	vchan_dma_desc_free_list(&schan->vc, &head);
+	return 0;
+}
+
+static void sprd_dma_free_desc(struct virt_dma_desc *vd)
+{
+	struct sprd_dma_desc *sdesc = to_sprd_dma_desc(vd);
+
+	kfree(sdesc);
+}
+
+static bool sprd_dma_filter_fn(struct dma_chan *chan, void *param)
+{
+	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+	u32 slave_id = *(u32 *)param;
+
+	schan->dev_id = slave_id;
+	return true;
+}
+
+static int sprd_dma_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct sprd_dma_dev *sdev;
+	struct sprd_dma_chn *dma_chn;
+	u32 chn_count;
+	int ret, i;
+
+	/* Parse new and deprecated dma-channels properties */
+	ret = device_property_read_u32(&pdev->dev, "dma-channels", &chn_count);
+	if (ret)
+		ret = device_property_read_u32(&pdev->dev, "#dma-channels",
+					       &chn_count);
+	if (ret) {
+		dev_err(&pdev->dev, "get dma channels count failed\n");
+		return ret;
+	}
+
+	sdev = devm_kzalloc(&pdev->dev,
+			    struct_size(sdev, channels, chn_count),
+			    GFP_KERNEL);
+	if (!sdev)
+		return -ENOMEM;
+
+	sdev->clk = devm_clk_get(&pdev->dev, "enable");
+	if (IS_ERR(sdev->clk)) {
+		dev_err(&pdev->dev, "get enable clock failed\n");
+		return PTR_ERR(sdev->clk);
+	}
+
+	/* ashb clock is optional for AGCP DMA */
+	sdev->ashb_clk = devm_clk_get(&pdev->dev, "ashb_eb");
+	if (IS_ERR(sdev->ashb_clk))
+		dev_warn(&pdev->dev, "no optional ashb eb clock\n");
+
+	/*
+	 * We have three DMA controllers: AP DMA, AON DMA and AGCP DMA. For AGCP
+	 * DMA controller, it can or do not request the irq, which will save
+	 * system power without resuming system by DMA interrupts if AGCP DMA
+	 * does not request the irq. Thus the DMA interrupts property should
+	 * be optional.
+	 */
+	sdev->irq = platform_get_irq(pdev, 0);
+	if (sdev->irq > 0) {
+		ret = devm_request_irq(&pdev->dev, sdev->irq, dma_irq_handle,
+				       0, "sprd_dma", (void *)sdev);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "request dma irq failed\n");
+			return ret;
+		}
+	} else {
+		dev_warn(&pdev->dev, "no interrupts for the dma controller\n");
+	}
+
+	sdev->glb_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(sdev->glb_base))
+		return PTR_ERR(sdev->glb_base);
+
+	dma_cap_set(DMA_MEMCPY, sdev->dma_dev.cap_mask);
+	sdev->total_chns = chn_count;
+	sdev->dma_dev.chancnt = chn_count;
+	INIT_LIST_HEAD(&sdev->dma_dev.channels);
+	INIT_LIST_HEAD(&sdev->dma_dev.global_node);
+	sdev->dma_dev.dev = &pdev->dev;
+	sdev->dma_dev.device_alloc_chan_resources = sprd_dma_alloc_chan_resources;
+	sdev->dma_dev.device_free_chan_resources = sprd_dma_free_chan_resources;
+	sdev->dma_dev.device_tx_status = sprd_dma_tx_status;
+	sdev->dma_dev.device_issue_pending = sprd_dma_issue_pending;
+	sdev->dma_dev.device_prep_dma_memcpy = sprd_dma_prep_dma_memcpy;
+	sdev->dma_dev.device_prep_slave_sg = sprd_dma_prep_slave_sg;
+	sdev->dma_dev.device_config = sprd_dma_slave_config;
+	sdev->dma_dev.device_pause = sprd_dma_pause;
+	sdev->dma_dev.device_resume = sprd_dma_resume;
+	sdev->dma_dev.device_terminate_all = sprd_dma_terminate_all;
+
+	for (i = 0; i < chn_count; i++) {
+		dma_chn = &sdev->channels[i];
+		dma_chn->chn_num = i;
+		dma_chn->cur_desc = NULL;
+		/* get each channel's registers base address. */
+		dma_chn->chn_base = sdev->glb_base + SPRD_DMA_CHN_REG_OFFSET +
+				    SPRD_DMA_CHN_REG_LENGTH * i;
+
+		dma_chn->vc.desc_free = sprd_dma_free_desc;
+		vchan_init(&dma_chn->vc, &sdev->dma_dev);
+	}
+
+	platform_set_drvdata(pdev, sdev);
+	ret = sprd_dma_enable(sdev);
+	if (ret)
+		return ret;
+
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0)
+		goto err_rpm;
+
+	ret = dma_async_device_register(&sdev->dma_dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "register dma device failed:%d\n", ret);
+		goto err_register;
+	}
+
+	sprd_dma_info.dma_cap = sdev->dma_dev.cap_mask;
+	ret = of_dma_controller_register(np, of_dma_simple_xlate,
+					 &sprd_dma_info);
+	if (ret)
+		goto err_of_register;
+
+	pm_runtime_put(&pdev->dev);
+	return 0;
+
+err_of_register:
+	dma_async_device_unregister(&sdev->dma_dev);
+err_register:
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+err_rpm:
+	sprd_dma_disable(sdev);
+	return ret;
+}
+
+static int sprd_dma_remove(struct platform_device *pdev)
+{
+	struct sprd_dma_dev *sdev = platform_get_drvdata(pdev);
+	struct sprd_dma_chn *c, *cn;
+
+	pm_runtime_get_sync(&pdev->dev);
+
+	/* explicitly free the irq */
+	if (sdev->irq > 0)
+		devm_free_irq(&pdev->dev, sdev->irq, sdev);
+
+	list_for_each_entry_safe(c, cn, &sdev->dma_dev.channels,
+				 vc.chan.device_node) {
+		list_del(&c->vc.chan.device_node);
+		tasklet_kill(&c->vc.task);
+	}
+
+	of_dma_controller_free(pdev->dev.of_node);
+	dma_async_device_unregister(&sdev->dma_dev);
+	sprd_dma_disable(sdev);
+
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	return 0;
+}
+
+static const struct of_device_id sprd_dma_match[] = {
+	{ .compatible = "sprd,sc9860-dma", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sprd_dma_match);
+
+static int __maybe_unused sprd_dma_runtime_suspend(struct device *dev)
+{
+	struct sprd_dma_dev *sdev = dev_get_drvdata(dev);
+
+	sprd_dma_disable(sdev);
+	return 0;
+}
+
+static int __maybe_unused sprd_dma_runtime_resume(struct device *dev)
+{
+	struct sprd_dma_dev *sdev = dev_get_drvdata(dev);
+	int ret;
+
+	ret = sprd_dma_enable(sdev);
+	if (ret)
+		dev_err(sdev->dma_dev.dev, "enable dma failed\n");
+
+	return ret;
+}
+
+static const struct dev_pm_ops sprd_dma_pm_ops = {
+	SET_RUNTIME_PM_OPS(sprd_dma_runtime_suspend,
+			   sprd_dma_runtime_resume,
+			   NULL)
+};
+
+static struct platform_driver sprd_dma_driver = {
+	.probe = sprd_dma_probe,
+	.remove = sprd_dma_remove,
+	.driver = {
+		.name = "sprd-dma",
+		.of_match_table = sprd_dma_match,
+		.pm = &sprd_dma_pm_ops,
+	},
+};
+module_platform_driver(sprd_dma_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DMA driver for Spreadtrum");
+MODULE_AUTHOR("Baolin Wang <baolin.wang@spreadtrum.com>");
+MODULE_AUTHOR("Eric Long <eric.long@spreadtrum.com>");
+MODULE_ALIAS("platform:sprd-dma");