Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 565 insertions, 0 deletions

diff --git a/drivers/edac/i3000_edac.c b/drivers/edac/i3000_edac.c
new file mode 100644
index 000000000..9065bc438
--- /dev/null
+++ b/drivers/edac/i3000_edac.c
@@ -0,0 +1,565 @@
+/*
+ * Intel 3000/3010 Memory Controller kernel module
+ * Copyright (C) 2007 Akamai Technologies, Inc.
+ * Shamelessly copied from:
+ * 	Intel D82875P Memory Controller kernel module
+ * 	(C) 2003 Linux Networx (http://lnxi.com)
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/edac.h>
+#include "edac_module.h"
+
+#define EDAC_MOD_STR		"i3000_edac"
+
+#define I3000_RANKS		8
+#define I3000_RANKS_PER_CHANNEL	4
+#define I3000_CHANNELS		2
+
+/* Intel 3000 register addresses - device 0 function 0 - DRAM Controller */
+
+#define I3000_MCHBAR		0x44	/* MCH Memory Mapped Register BAR */
+#define I3000_MCHBAR_MASK	0xffffc000
+#define I3000_MMR_WINDOW_SIZE	16384
+
+#define I3000_EDEAP	0x70	/* Extended DRAM Error Address Pointer (8b)
+				 *
+				 * 7:1   reserved
+				 * 0     bit 32 of address
+				 */
+#define I3000_DEAP	0x58	/* DRAM Error Address Pointer (32b)
+				 *
+				 * 31:7  address
+				 * 6:1   reserved
+				 * 0     Error channel 0/1
+				 */
+#define I3000_DEAP_GRAIN 		(1 << 7)
+
+/*
+ * Helper functions to decode the DEAP/EDEAP hardware registers.
+ *
+ * The type promotion here is deliberate; we're deriving an
+ * unsigned long pfn and offset from hardware regs which are u8/u32.
+ */
+
+static inline unsigned long deap_pfn(u8 edeap, u32 deap)
+{
+	deap >>= PAGE_SHIFT;
+	deap |= (edeap & 1) << (32 - PAGE_SHIFT);
+	return deap;
+}
+
+static inline unsigned long deap_offset(u32 deap)
+{
+	return deap & ~(I3000_DEAP_GRAIN - 1) & ~PAGE_MASK;
+}
+
+static inline int deap_channel(u32 deap)
+{
+	return deap & 1;
+}
+
+#define I3000_DERRSYN	0x5c	/* DRAM Error Syndrome (8b)
+				 *
+				 *  7:0  DRAM ECC Syndrome
+				 */
+
+#define I3000_ERRSTS	0xc8	/* Error Status Register (16b)
+				 *
+				 * 15:12 reserved
+				 * 11    MCH Thermal Sensor Event
+				 *         for SMI/SCI/SERR
+				 * 10    reserved
+				 *  9    LOCK to non-DRAM Memory Flag (LCKF)
+				 *  8    Received Refresh Timeout Flag (RRTOF)
+				 *  7:2  reserved
+				 *  1    Multi-bit DRAM ECC Error Flag (DMERR)
+				 *  0    Single-bit DRAM ECC Error Flag (DSERR)
+				 */
+#define I3000_ERRSTS_BITS	0x0b03	/* bits which indicate errors */
+#define I3000_ERRSTS_UE		0x0002
+#define I3000_ERRSTS_CE		0x0001
+
+#define I3000_ERRCMD	0xca	/* Error Command (16b)
+				 *
+				 * 15:12 reserved
+				 * 11    SERR on MCH Thermal Sensor Event
+				 *         (TSESERR)
+				 * 10    reserved
+				 *  9    SERR on LOCK to non-DRAM Memory
+				 *         (LCKERR)
+				 *  8    SERR on DRAM Refresh Timeout
+				 *         (DRTOERR)
+				 *  7:2  reserved
+				 *  1    SERR Multi-Bit DRAM ECC Error
+				 *         (DMERR)
+				 *  0    SERR on Single-Bit ECC Error
+				 *         (DSERR)
+				 */
+
+/* Intel  MMIO register space - device 0 function 0 - MMR space */
+
+#define I3000_DRB_SHIFT 25	/* 32MiB grain */
+
+#define I3000_C0DRB	0x100	/* Channel 0 DRAM Rank Boundary (8b x 4)
+				 *
+				 * 7:0   Channel 0 DRAM Rank Boundary Address
+				 */
+#define I3000_C1DRB	0x180	/* Channel 1 DRAM Rank Boundary (8b x 4)
+				 *
+				 * 7:0   Channel 1 DRAM Rank Boundary Address
+				 */
+
+#define I3000_C0DRA	0x108	/* Channel 0 DRAM Rank Attribute (8b x 2)
+				 *
+				 * 7     reserved
+				 * 6:4   DRAM odd Rank Attribute
+				 * 3     reserved
+				 * 2:0   DRAM even Rank Attribute
+				 *
+				 * Each attribute defines the page
+				 * size of the corresponding rank:
+				 *     000: unpopulated
+				 *     001: reserved
+				 *     010: 4 KB
+				 *     011: 8 KB
+				 *     100: 16 KB
+				 *     Others: reserved
+				 */
+#define I3000_C1DRA	0x188	/* Channel 1 DRAM Rank Attribute (8b x 2) */
+
+static inline unsigned char odd_rank_attrib(unsigned char dra)
+{
+	return (dra & 0x70) >> 4;
+}
+
+static inline unsigned char even_rank_attrib(unsigned char dra)
+{
+	return dra & 0x07;
+}
+
+#define I3000_C0DRC0	0x120	/* DRAM Controller Mode 0 (32b)
+				 *
+				 * 31:30 reserved
+				 * 29    Initialization Complete (IC)
+				 * 28:11 reserved
+				 * 10:8  Refresh Mode Select (RMS)
+				 * 7     reserved
+				 * 6:4   Mode Select (SMS)
+				 * 3:2   reserved
+				 * 1:0   DRAM Type (DT)
+				 */
+
+#define I3000_C0DRC1	0x124	/* DRAM Controller Mode 1 (32b)
+				 *
+				 * 31    Enhanced Addressing Enable (ENHADE)
+				 * 30:0  reserved
+				 */
+
+enum i3000p_chips {
+	I3000 = 0,
+};
+
+struct i3000_dev_info {
+	const char *ctl_name;
+};
+
+struct i3000_error_info {
+	u16 errsts;
+	u8 derrsyn;
+	u8 edeap;
+	u32 deap;
+	u16 errsts2;
+};
+
+static const struct i3000_dev_info i3000_devs[] = {
+	[I3000] = {
+		.ctl_name = "i3000"},
+};
+
+static struct pci_dev *mci_pdev;
+static int i3000_registered = 1;
+static struct edac_pci_ctl_info *i3000_pci;
+
+static void i3000_get_error_info(struct mem_ctl_info *mci,
+				 struct i3000_error_info *info)
+{
+	struct pci_dev *pdev;
+
+	pdev = to_pci_dev(mci->pdev);
+
+	/*
+	 * This is a mess because there is no atomic way to read all the
+	 * registers at once and the registers can transition from CE being
+	 * overwritten by UE.
+	 */
+	pci_read_config_word(pdev, I3000_ERRSTS, &info->errsts);
+	if (!(info->errsts & I3000_ERRSTS_BITS))
+		return;
+	pci_read_config_byte(pdev, I3000_EDEAP, &info->edeap);
+	pci_read_config_dword(pdev, I3000_DEAP, &info->deap);
+	pci_read_config_byte(pdev, I3000_DERRSYN, &info->derrsyn);
+	pci_read_config_word(pdev, I3000_ERRSTS, &info->errsts2);
+
+	/*
+	 * If the error is the same for both reads then the first set
+	 * of reads is valid.  If there is a change then there is a CE
+	 * with no info and the second set of reads is valid and
+	 * should be UE info.
+	 */
+	if ((info->errsts ^ info->errsts2) & I3000_ERRSTS_BITS) {
+		pci_read_config_byte(pdev, I3000_EDEAP, &info->edeap);
+		pci_read_config_dword(pdev, I3000_DEAP, &info->deap);
+		pci_read_config_byte(pdev, I3000_DERRSYN, &info->derrsyn);
+	}
+
+	/*
+	 * Clear any error bits.
+	 * (Yes, we really clear bits by writing 1 to them.)
+	 */
+	pci_write_bits16(pdev, I3000_ERRSTS, I3000_ERRSTS_BITS,
+			 I3000_ERRSTS_BITS);
+}
+
+static int i3000_process_error_info(struct mem_ctl_info *mci,
+				struct i3000_error_info *info,
+				int handle_errors)
+{
+	int row, multi_chan, channel;
+	unsigned long pfn, offset;
+
+	multi_chan = mci->csrows[0]->nr_channels - 1;
+
+	if (!(info->errsts & I3000_ERRSTS_BITS))
+		return 0;
+
+	if (!handle_errors)
+		return 1;
+
+	if ((info->errsts ^ info->errsts2) & I3000_ERRSTS_BITS) {
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
+				     -1, -1, -1,
+				     "UE overwrote CE", "");
+		info->errsts = info->errsts2;
+	}
+
+	pfn = deap_pfn(info->edeap, info->deap);
+	offset = deap_offset(info->deap);
+	channel = deap_channel(info->deap);
+
+	row = edac_mc_find_csrow_by_page(mci, pfn);
+
+	if (info->errsts & I3000_ERRSTS_UE)
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+				     pfn, offset, 0,
+				     row, -1, -1,
+				     "i3000 UE", "");
+	else
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+				     pfn, offset, info->derrsyn,
+				     row, multi_chan ? channel : 0, -1,
+				     "i3000 CE", "");
+
+	return 1;
+}
+
+static void i3000_check(struct mem_ctl_info *mci)
+{
+	struct i3000_error_info info;
+
+	i3000_get_error_info(mci, &info);
+	i3000_process_error_info(mci, &info, 1);
+}
+
+static int i3000_is_interleaved(const unsigned char *c0dra,
+				const unsigned char *c1dra,
+				const unsigned char *c0drb,
+				const unsigned char *c1drb)
+{
+	int i;
+
+	/*
+	 * If the channels aren't populated identically then
+	 * we're not interleaved.
+	 */
+	for (i = 0; i < I3000_RANKS_PER_CHANNEL / 2; i++)
+		if (odd_rank_attrib(c0dra[i]) != odd_rank_attrib(c1dra[i]) ||
+			even_rank_attrib(c0dra[i]) !=
+						even_rank_attrib(c1dra[i]))
+			return 0;
+
+	/*
+	 * If the rank boundaries for the two channels are different
+	 * then we're not interleaved.
+	 */
+	for (i = 0; i < I3000_RANKS_PER_CHANNEL; i++)
+		if (c0drb[i] != c1drb[i])
+			return 0;
+
+	return 1;
+}
+
+static int i3000_probe1(struct pci_dev *pdev, int dev_idx)
+{
+	int rc;
+	int i, j;
+	struct mem_ctl_info *mci = NULL;
+	struct edac_mc_layer layers[2];
+	unsigned long last_cumul_size, nr_pages;
+	int interleaved, nr_channels;
+	unsigned char dra[I3000_RANKS / 2], drb[I3000_RANKS];
+	unsigned char *c0dra = dra, *c1dra = &dra[I3000_RANKS_PER_CHANNEL / 2];
+	unsigned char *c0drb = drb, *c1drb = &drb[I3000_RANKS_PER_CHANNEL];
+	unsigned long mchbar;
+	void __iomem *window;
+
+	edac_dbg(0, "MC:\n");
+
+	pci_read_config_dword(pdev, I3000_MCHBAR, (u32 *) & mchbar);
+	mchbar &= I3000_MCHBAR_MASK;
+	window = ioremap(mchbar, I3000_MMR_WINDOW_SIZE);
+	if (!window) {
+		printk(KERN_ERR "i3000: cannot map mmio space at 0x%lx\n",
+			mchbar);
+		return -ENODEV;
+	}
+
+	c0dra[0] = readb(window + I3000_C0DRA + 0);	/* ranks 0,1 */
+	c0dra[1] = readb(window + I3000_C0DRA + 1);	/* ranks 2,3 */
+	c1dra[0] = readb(window + I3000_C1DRA + 0);	/* ranks 0,1 */
+	c1dra[1] = readb(window + I3000_C1DRA + 1);	/* ranks 2,3 */
+
+	for (i = 0; i < I3000_RANKS_PER_CHANNEL; i++) {
+		c0drb[i] = readb(window + I3000_C0DRB + i);
+		c1drb[i] = readb(window + I3000_C1DRB + i);
+	}
+
+	iounmap(window);
+
+	/*
+	 * Figure out how many channels we have.
+	 *
+	 * If we have what the datasheet calls "asymmetric channels"
+	 * (essentially the same as what was called "virtual single
+	 * channel mode" in the i82875) then it's a single channel as
+	 * far as EDAC is concerned.
+	 */
+	interleaved = i3000_is_interleaved(c0dra, c1dra, c0drb, c1drb);
+	nr_channels = interleaved ? 2 : 1;
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = I3000_RANKS / nr_channels;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = nr_channels;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0);
+	if (!mci)
+		return -ENOMEM;
+
+	edac_dbg(3, "MC: init mci\n");
+
+	mci->pdev = &pdev->dev;
+	mci->mtype_cap = MEM_FLAG_DDR2;
+
+	mci->edac_ctl_cap = EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+
+	mci->mod_name = EDAC_MOD_STR;
+	mci->ctl_name = i3000_devs[dev_idx].ctl_name;
+	mci->dev_name = pci_name(pdev);
+	mci->edac_check = i3000_check;
+	mci->ctl_page_to_phys = NULL;
+
+	/*
+	 * The dram rank boundary (DRB) reg values are boundary addresses
+	 * for each DRAM rank with a granularity of 32MB.  DRB regs are
+	 * cumulative; the last one will contain the total memory
+	 * contained in all ranks.
+	 *
+	 * If we're in interleaved mode then we're only walking through
+	 * the ranks of controller 0, so we double all the values we see.
+	 */
+	for (last_cumul_size = i = 0; i < mci->nr_csrows; i++) {
+		u8 value;
+		u32 cumul_size;
+		struct csrow_info *csrow = mci->csrows[i];
+
+		value = drb[i];
+		cumul_size = value << (I3000_DRB_SHIFT - PAGE_SHIFT);
+		if (interleaved)
+			cumul_size <<= 1;
+		edac_dbg(3, "MC: (%d) cumul_size 0x%x\n", i, cumul_size);
+		if (cumul_size == last_cumul_size)
+			continue;
+
+		csrow->first_page = last_cumul_size;
+		csrow->last_page = cumul_size - 1;
+		nr_pages = cumul_size - last_cumul_size;
+		last_cumul_size = cumul_size;
+
+		for (j = 0; j < nr_channels; j++) {
+			struct dimm_info *dimm = csrow->channels[j]->dimm;
+
+			dimm->nr_pages = nr_pages / nr_channels;
+			dimm->grain = I3000_DEAP_GRAIN;
+			dimm->mtype = MEM_DDR2;
+			dimm->dtype = DEV_UNKNOWN;
+			dimm->edac_mode = EDAC_UNKNOWN;
+		}
+	}
+
+	/*
+	 * Clear any error bits.
+	 * (Yes, we really clear bits by writing 1 to them.)
+	 */
+	pci_write_bits16(pdev, I3000_ERRSTS, I3000_ERRSTS_BITS,
+			 I3000_ERRSTS_BITS);
+
+	rc = -ENODEV;
+	if (edac_mc_add_mc(mci)) {
+		edac_dbg(3, "MC: failed edac_mc_add_mc()\n");
+		goto fail;
+	}
+
+	/* allocating generic PCI control info */
+	i3000_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
+	if (!i3000_pci) {
+		printk(KERN_WARNING
+			"%s(): Unable to create PCI control\n",
+			__func__);
+		printk(KERN_WARNING
+			"%s(): PCI error report via EDAC not setup\n",
+			__func__);
+	}
+
+	/* get this far and it's successful */
+	edac_dbg(3, "MC: success\n");
+	return 0;
+
+fail:
+	if (mci)
+		edac_mc_free(mci);
+
+	return rc;
+}
+
+/* returns count (>= 0), or negative on error */
+static int i3000_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	int rc;
+
+	edac_dbg(0, "MC:\n");
+
+	if (pci_enable_device(pdev) < 0)
+		return -EIO;
+
+	rc = i3000_probe1(pdev, ent->driver_data);
+	if (!mci_pdev)
+		mci_pdev = pci_dev_get(pdev);
+
+	return rc;
+}
+
+static void i3000_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+
+	edac_dbg(0, "\n");
+
+	if (i3000_pci)
+		edac_pci_release_generic_ctl(i3000_pci);
+
+	mci = edac_mc_del_mc(&pdev->dev);
+	if (!mci)
+		return;
+
+	edac_mc_free(mci);
+}
+
+static const struct pci_device_id i3000_pci_tbl[] = {
+	{
+	 PCI_VEND_DEV(INTEL, 3000_HB), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	 I3000},
+	{
+	 0,
+	 }			/* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, i3000_pci_tbl);
+
+static struct pci_driver i3000_driver = {
+	.name = EDAC_MOD_STR,
+	.probe = i3000_init_one,
+	.remove = i3000_remove_one,
+	.id_table = i3000_pci_tbl,
+};
+
+static int __init i3000_init(void)
+{
+	int pci_rc;
+
+	edac_dbg(3, "MC:\n");
+
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
+
+	pci_rc = pci_register_driver(&i3000_driver);
+	if (pci_rc < 0)
+		goto fail0;
+
+	if (!mci_pdev) {
+		i3000_registered = 0;
+		mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+					PCI_DEVICE_ID_INTEL_3000_HB, NULL);
+		if (!mci_pdev) {
+			edac_dbg(0, "i3000 pci_get_device fail\n");
+			pci_rc = -ENODEV;
+			goto fail1;
+		}
+
+		pci_rc = i3000_init_one(mci_pdev, i3000_pci_tbl);
+		if (pci_rc < 0) {
+			edac_dbg(0, "i3000 init fail\n");
+			pci_rc = -ENODEV;
+			goto fail1;
+		}
+	}
+
+	return 0;
+
+fail1:
+	pci_unregister_driver(&i3000_driver);
+
+fail0:
+	pci_dev_put(mci_pdev);
+
+	return pci_rc;
+}
+
+static void __exit i3000_exit(void)
+{
+	edac_dbg(3, "MC:\n");
+
+	pci_unregister_driver(&i3000_driver);
+	if (!i3000_registered) {
+		i3000_remove_one(mci_pdev);
+		pci_dev_put(mci_pdev);
+	}
+}
+
+module_init(i3000_init);
+module_exit(i3000_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Akamai Technologies Arthur Ulfeldt/Jason Uhlenkott");
+MODULE_DESCRIPTION("MC support for Intel 3000 memory hub controllers");
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");