Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 966 insertions, 0 deletions

diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c
new file mode 100644
index 000000000..1bc0426ce
--- /dev/null
+++ b/drivers/extcon/extcon-max77843.c
@@ -0,0 +1,966 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// extcon-max77843.c - Maxim MAX77843 extcon driver to support
+//			MUIC(Micro USB Interface Controller)
+//
+// Copyright (C) 2015 Samsung Electronics
+// Author: Jaewon Kim <jaewon02.kim@samsung.com>
+
+#include <linux/extcon-provider.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/max77693-common.h>
+#include <linux/mfd/max77843-private.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+
+#define DELAY_MS_DEFAULT		15000	/* unit: millisecond */
+
+enum max77843_muic_status {
+	MAX77843_MUIC_STATUS1 = 0,
+	MAX77843_MUIC_STATUS2,
+	MAX77843_MUIC_STATUS3,
+
+	MAX77843_MUIC_STATUS_NUM,
+};
+
+struct max77843_muic_info {
+	struct device *dev;
+	struct max77693_dev *max77843;
+	struct extcon_dev *edev;
+
+	struct mutex mutex;
+	struct work_struct irq_work;
+	struct delayed_work wq_detcable;
+
+	u8 status[MAX77843_MUIC_STATUS_NUM];
+	int prev_cable_type;
+	int prev_chg_type;
+	int prev_gnd_type;
+
+	bool irq_adc;
+	bool irq_chg;
+};
+
+enum max77843_muic_cable_group {
+	MAX77843_CABLE_GROUP_ADC = 0,
+	MAX77843_CABLE_GROUP_ADC_GND,
+	MAX77843_CABLE_GROUP_CHG,
+};
+
+enum max77843_muic_adc_debounce_time {
+	MAX77843_DEBOUNCE_TIME_5MS = 0,
+	MAX77843_DEBOUNCE_TIME_10MS,
+	MAX77843_DEBOUNCE_TIME_25MS,
+	MAX77843_DEBOUNCE_TIME_38_62MS,
+};
+
+/* Define accessory cable type */
+enum max77843_muic_accessory_type {
+	MAX77843_MUIC_ADC_GROUND = 0,
+	MAX77843_MUIC_ADC_SEND_END_BUTTON,
+	MAX77843_MUIC_ADC_REMOTE_S1_BUTTON,
+	MAX77843_MUIC_ADC_REMOTE_S2_BUTTON,
+	MAX77843_MUIC_ADC_REMOTE_S3_BUTTON,
+	MAX77843_MUIC_ADC_REMOTE_S4_BUTTON,
+	MAX77843_MUIC_ADC_REMOTE_S5_BUTTON,
+	MAX77843_MUIC_ADC_REMOTE_S6_BUTTON,
+	MAX77843_MUIC_ADC_REMOTE_S7_BUTTON,
+	MAX77843_MUIC_ADC_REMOTE_S8_BUTTON,
+	MAX77843_MUIC_ADC_REMOTE_S9_BUTTON,
+	MAX77843_MUIC_ADC_REMOTE_S10_BUTTON,
+	MAX77843_MUIC_ADC_REMOTE_S11_BUTTON,
+	MAX77843_MUIC_ADC_REMOTE_S12_BUTTON,
+	MAX77843_MUIC_ADC_RESERVED_ACC_1,
+	MAX77843_MUIC_ADC_RESERVED_ACC_2,
+	MAX77843_MUIC_ADC_RESERVED_ACC_3, /* SmartDock */
+	MAX77843_MUIC_ADC_RESERVED_ACC_4,
+	MAX77843_MUIC_ADC_RESERVED_ACC_5,
+	MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2,
+	MAX77843_MUIC_ADC_PHONE_POWERED_DEV,
+	MAX77843_MUIC_ADC_TTY_CONVERTER,
+	MAX77843_MUIC_ADC_UART_CABLE,
+	MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG,
+	MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF,
+	MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON,
+	MAX77843_MUIC_ADC_AV_CABLE_NOLOAD,
+	MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG,
+	MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF,
+	MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON,
+	MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1,
+	MAX77843_MUIC_ADC_OPEN,
+
+	/*
+	 * The below accessories should check
+	 * not only ADC value but also ADC1K and VBVolt value.
+	 */
+						/* Offset|ADC1K|VBVolt| */
+	MAX77843_MUIC_GND_USB_HOST = 0x100,	/*    0x1|    0|     0| */
+	MAX77843_MUIC_GND_USB_HOST_VB = 0x101,	/*    0x1|    0|     1| */
+	MAX77843_MUIC_GND_MHL = 0x102,		/*    0x1|    1|     0| */
+	MAX77843_MUIC_GND_MHL_VB = 0x103,	/*    0x1|    1|     1| */
+};
+
+/* Define charger cable type */
+enum max77843_muic_charger_type {
+	MAX77843_MUIC_CHG_NONE = 0,
+	MAX77843_MUIC_CHG_USB,
+	MAX77843_MUIC_CHG_DOWNSTREAM,
+	MAX77843_MUIC_CHG_DEDICATED,
+	MAX77843_MUIC_CHG_SPECIAL_500MA,
+	MAX77843_MUIC_CHG_SPECIAL_1A,
+	MAX77843_MUIC_CHG_SPECIAL_BIAS,
+	MAX77843_MUIC_CHG_RESERVED,
+	MAX77843_MUIC_CHG_GND,
+	MAX77843_MUIC_CHG_DOCK,
+};
+
+static const unsigned int max77843_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_CHG_USB_SDP,
+	EXTCON_CHG_USB_DCP,
+	EXTCON_CHG_USB_CDP,
+	EXTCON_CHG_USB_FAST,
+	EXTCON_CHG_USB_SLOW,
+	EXTCON_DISP_MHL,
+	EXTCON_DOCK,
+	EXTCON_JIG,
+	EXTCON_NONE,
+};
+
+struct max77843_muic_irq {
+	unsigned int irq;
+	const char *name;
+	unsigned int virq;
+};
+
+static struct max77843_muic_irq max77843_muic_irqs[] = {
+	{ MAX77843_MUIC_IRQ_INT1_ADC,		"MUIC-ADC" },
+	{ MAX77843_MUIC_IRQ_INT1_ADCERROR,	"MUIC-ADC_ERROR" },
+	{ MAX77843_MUIC_IRQ_INT1_ADC1K,		"MUIC-ADC1K" },
+	{ MAX77843_MUIC_IRQ_INT2_CHGTYP,	"MUIC-CHGTYP" },
+	{ MAX77843_MUIC_IRQ_INT2_CHGDETRUN,	"MUIC-CHGDETRUN" },
+	{ MAX77843_MUIC_IRQ_INT2_DCDTMR,	"MUIC-DCDTMR" },
+	{ MAX77843_MUIC_IRQ_INT2_DXOVP,		"MUIC-DXOVP" },
+	{ MAX77843_MUIC_IRQ_INT2_VBVOLT,	"MUIC-VBVOLT" },
+	{ MAX77843_MUIC_IRQ_INT3_VBADC,		"MUIC-VBADC" },
+	{ MAX77843_MUIC_IRQ_INT3_VDNMON,	"MUIC-VDNMON" },
+	{ MAX77843_MUIC_IRQ_INT3_DNRES,		"MUIC-DNRES" },
+	{ MAX77843_MUIC_IRQ_INT3_MPNACK,	"MUIC-MPNACK"},
+	{ MAX77843_MUIC_IRQ_INT3_MRXBUFOW,	"MUIC-MRXBUFOW"},
+	{ MAX77843_MUIC_IRQ_INT3_MRXTRF,	"MUIC-MRXTRF"},
+	{ MAX77843_MUIC_IRQ_INT3_MRXPERR,	"MUIC-MRXPERR"},
+	{ MAX77843_MUIC_IRQ_INT3_MRXRDY,	"MUIC-MRXRDY"},
+};
+
+static const struct regmap_config max77843_muic_regmap_config = {
+	.reg_bits       = 8,
+	.val_bits       = 8,
+	.max_register   = MAX77843_MUIC_REG_END,
+};
+
+static const struct regmap_irq max77843_muic_irq[] = {
+	/* INT1 interrupt */
+	{ .reg_offset = 0, .mask = MAX77843_MUIC_ADC, },
+	{ .reg_offset = 0, .mask = MAX77843_MUIC_ADCERROR, },
+	{ .reg_offset = 0, .mask = MAX77843_MUIC_ADC1K, },
+
+	/* INT2 interrupt */
+	{ .reg_offset = 1, .mask = MAX77843_MUIC_CHGTYP, },
+	{ .reg_offset = 1, .mask = MAX77843_MUIC_CHGDETRUN, },
+	{ .reg_offset = 1, .mask = MAX77843_MUIC_DCDTMR, },
+	{ .reg_offset = 1, .mask = MAX77843_MUIC_DXOVP, },
+	{ .reg_offset = 1, .mask = MAX77843_MUIC_VBVOLT, },
+
+	/* INT3 interrupt */
+	{ .reg_offset = 2, .mask = MAX77843_MUIC_VBADC, },
+	{ .reg_offset = 2, .mask = MAX77843_MUIC_VDNMON, },
+	{ .reg_offset = 2, .mask = MAX77843_MUIC_DNRES, },
+	{ .reg_offset = 2, .mask = MAX77843_MUIC_MPNACK, },
+	{ .reg_offset = 2, .mask = MAX77843_MUIC_MRXBUFOW, },
+	{ .reg_offset = 2, .mask = MAX77843_MUIC_MRXTRF, },
+	{ .reg_offset = 2, .mask = MAX77843_MUIC_MRXPERR, },
+	{ .reg_offset = 2, .mask = MAX77843_MUIC_MRXRDY, },
+};
+
+static const struct regmap_irq_chip max77843_muic_irq_chip = {
+	.name           = "max77843-muic",
+	.status_base    = MAX77843_MUIC_REG_INT1,
+	.unmask_base    = MAX77843_MUIC_REG_INTMASK1,
+	.num_regs       = 3,
+	.irqs           = max77843_muic_irq,
+	.num_irqs       = ARRAY_SIZE(max77843_muic_irq),
+};
+
+static int max77843_muic_set_path(struct max77843_muic_info *info,
+		u8 val, bool attached, bool nobccomp)
+{
+	struct max77693_dev *max77843 = info->max77843;
+	int ret = 0;
+	unsigned int ctrl1, ctrl2;
+
+	if (attached)
+		ctrl1 = val;
+	else
+		ctrl1 = MAX77843_MUIC_CONTROL1_SW_OPEN;
+	if (nobccomp) {
+		/* Disable BC1.2 protocol and force manual switch control */
+		ctrl1 |= MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK;
+	}
+
+	ret = regmap_update_bits(max77843->regmap_muic,
+			MAX77843_MUIC_REG_CONTROL1,
+			MAX77843_MUIC_CONTROL1_COM_SW |
+				MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK,
+			ctrl1);
+	if (ret < 0) {
+		dev_err(info->dev, "Cannot switch MUIC port\n");
+		return ret;
+	}
+
+	if (attached)
+		ctrl2 = MAX77843_MUIC_CONTROL2_CPEN_MASK;
+	else
+		ctrl2 = MAX77843_MUIC_CONTROL2_LOWPWR_MASK;
+
+	ret = regmap_update_bits(max77843->regmap_muic,
+			MAX77843_MUIC_REG_CONTROL2,
+			MAX77843_MUIC_CONTROL2_LOWPWR_MASK |
+			MAX77843_MUIC_CONTROL2_CPEN_MASK, ctrl2);
+	if (ret < 0) {
+		dev_err(info->dev, "Cannot update lowpower mode\n");
+		return ret;
+	}
+
+	dev_dbg(info->dev,
+		"CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n",
+		ctrl1, ctrl2, attached ? "attached" : "detached");
+
+	return 0;
+}
+
+static void max77843_charger_set_otg_vbus(struct max77843_muic_info *info,
+		 bool on)
+{
+	struct max77693_dev *max77843 = info->max77843;
+	unsigned int cnfg00;
+
+	if (on)
+		cnfg00 = MAX77843_CHG_OTG_MASK | MAX77843_CHG_BOOST_MASK;
+	else
+		cnfg00 = MAX77843_CHG_ENABLE | MAX77843_CHG_BUCK_MASK;
+
+	regmap_update_bits(max77843->regmap_chg, MAX77843_CHG_REG_CHG_CNFG_00,
+			   MAX77843_CHG_MODE_MASK, cnfg00);
+}
+
+static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
+		enum max77843_muic_cable_group group, bool *attached)
+{
+	int adc, chg_type, cable_type, gnd_type;
+
+	adc = info->status[MAX77843_MUIC_STATUS1] &
+			MAX77843_MUIC_STATUS1_ADC_MASK;
+	adc >>= MAX77843_MUIC_STATUS1_ADC_SHIFT;
+
+	switch (group) {
+	case MAX77843_CABLE_GROUP_ADC:
+		if (adc == MAX77843_MUIC_ADC_OPEN) {
+			*attached = false;
+			cable_type = info->prev_cable_type;
+			info->prev_cable_type = MAX77843_MUIC_ADC_OPEN;
+		} else {
+			*attached = true;
+			cable_type = info->prev_cable_type = adc;
+		}
+		break;
+	case MAX77843_CABLE_GROUP_CHG:
+		chg_type = info->status[MAX77843_MUIC_STATUS2] &
+				MAX77843_MUIC_STATUS2_CHGTYP_MASK;
+
+		/* Check GROUND accessory with charger cable */
+		if (adc == MAX77843_MUIC_ADC_GROUND) {
+			if (chg_type == MAX77843_MUIC_CHG_NONE) {
+				/*
+				 * The following state when charger cable is
+				 * disconnected but the GROUND accessory still
+				 * connected.
+				 */
+				*attached = false;
+				cable_type = info->prev_chg_type;
+				info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
+			} else {
+
+				/*
+				 * The following state when charger cable is
+				 * connected on the GROUND accessory.
+				 */
+				*attached = true;
+				cable_type = MAX77843_MUIC_CHG_GND;
+				info->prev_chg_type = MAX77843_MUIC_CHG_GND;
+			}
+			break;
+		}
+
+		if (adc == MAX77843_MUIC_ADC_RESERVED_ACC_3) { /* SmartDock */
+			if (chg_type == MAX77843_MUIC_CHG_NONE) {
+				*attached = false;
+				cable_type = info->prev_chg_type;
+				info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
+			} else {
+				*attached = true;
+				cable_type = MAX77843_MUIC_CHG_DOCK;
+				info->prev_chg_type = MAX77843_MUIC_CHG_DOCK;
+			}
+			break;
+		}
+
+		if (chg_type == MAX77843_MUIC_CHG_NONE) {
+			*attached = false;
+			cable_type = info->prev_chg_type;
+			info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
+		} else {
+			*attached = true;
+			cable_type = info->prev_chg_type = chg_type;
+		}
+		break;
+	case MAX77843_CABLE_GROUP_ADC_GND:
+		if (adc == MAX77843_MUIC_ADC_OPEN) {
+			*attached = false;
+			cable_type = info->prev_gnd_type;
+			info->prev_gnd_type = MAX77843_MUIC_ADC_OPEN;
+		} else {
+			*attached = true;
+
+			/*
+			 * Offset|ADC1K|VBVolt|
+			 *    0x1|    0|     0| USB-HOST
+			 *    0x1|    0|     1| USB-HOST with VB
+			 *    0x1|    1|     0| MHL
+			 *    0x1|    1|     1| MHL with VB
+			 */
+			/* Get ADC1K register bit */
+			gnd_type = (info->status[MAX77843_MUIC_STATUS1] &
+					MAX77843_MUIC_STATUS1_ADC1K_MASK);
+
+			/* Get VBVolt register bit */
+			gnd_type |= (info->status[MAX77843_MUIC_STATUS2] &
+					MAX77843_MUIC_STATUS2_VBVOLT_MASK);
+			gnd_type >>= MAX77843_MUIC_STATUS2_VBVOLT_SHIFT;
+
+			/* Offset of GND cable */
+			gnd_type |= MAX77843_MUIC_GND_USB_HOST;
+			cable_type = info->prev_gnd_type = gnd_type;
+		}
+		break;
+	default:
+		dev_err(info->dev, "Unknown cable group (%d)\n", group);
+		cable_type = -EINVAL;
+		break;
+	}
+
+	return cable_type;
+}
+
+static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
+{
+	int ret, gnd_cable_type;
+	bool attached;
+
+	gnd_cable_type = max77843_muic_get_cable_type(info,
+			MAX77843_CABLE_GROUP_ADC_GND, &attached);
+	dev_dbg(info->dev, "external connector is %s (gnd:0x%02x)\n",
+			attached ? "attached" : "detached", gnd_cable_type);
+
+	switch (gnd_cable_type) {
+	case MAX77843_MUIC_GND_USB_HOST:
+	case MAX77843_MUIC_GND_USB_HOST_VB:
+		ret = max77843_muic_set_path(info,
+					     MAX77843_MUIC_CONTROL1_SW_USB,
+					     attached, false);
+		if (ret < 0)
+			return ret;
+
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
+		max77843_charger_set_otg_vbus(info, attached);
+		break;
+	case MAX77843_MUIC_GND_MHL_VB:
+	case MAX77843_MUIC_GND_MHL:
+		ret = max77843_muic_set_path(info,
+					     MAX77843_MUIC_CONTROL1_SW_OPEN,
+					     attached, false);
+		if (ret < 0)
+			return ret;
+
+		extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
+		break;
+	default:
+		dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
+			attached ? "attached" : "detached", gnd_cable_type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int max77843_muic_jig_handler(struct max77843_muic_info *info,
+		int cable_type, bool attached)
+{
+	int ret;
+	u8 path = MAX77843_MUIC_CONTROL1_SW_OPEN;
+
+	dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
+			attached ? "attached" : "detached", cable_type);
+
+	switch (cable_type) {
+	case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
+	case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
+		path = MAX77843_MUIC_CONTROL1_SW_USB;
+		break;
+	case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
+		path = MAX77843_MUIC_CONTROL1_SW_UART;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = max77843_muic_set_path(info, path, attached, false);
+	if (ret < 0)
+		return ret;
+
+	extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
+
+	return 0;
+}
+
+static int max77843_muic_dock_handler(struct max77843_muic_info *info,
+		bool attached)
+{
+	int ret;
+
+	dev_dbg(info->dev, "external connector is %s (adc: 0x10)\n",
+			attached ? "attached" : "detached");
+
+	ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_USB,
+				     attached, attached);
+	if (ret < 0)
+		return ret;
+
+	extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
+	extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
+	extcon_set_state_sync(info->edev, EXTCON_DOCK, attached);
+
+	return 0;
+}
+
+static int max77843_muic_adc_handler(struct max77843_muic_info *info)
+{
+	int ret, cable_type;
+	bool attached;
+
+	cable_type = max77843_muic_get_cable_type(info,
+			MAX77843_CABLE_GROUP_ADC, &attached);
+
+	dev_dbg(info->dev,
+		"external connector is %s (adc:0x%02x, prev_adc:0x%x)\n",
+		attached ? "attached" : "detached", cable_type,
+		info->prev_cable_type);
+
+	switch (cable_type) {
+	case MAX77843_MUIC_ADC_RESERVED_ACC_3: /* SmartDock */
+		ret = max77843_muic_dock_handler(info, attached);
+		if (ret < 0)
+			return ret;
+		break;
+	case MAX77843_MUIC_ADC_GROUND:
+		ret = max77843_muic_adc_gnd_handler(info);
+		if (ret < 0)
+			return ret;
+		break;
+	case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
+	case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
+	case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
+		ret = max77843_muic_jig_handler(info, cable_type, attached);
+		if (ret < 0)
+			return ret;
+		break;
+	case MAX77843_MUIC_ADC_SEND_END_BUTTON:
+	case MAX77843_MUIC_ADC_REMOTE_S1_BUTTON:
+	case MAX77843_MUIC_ADC_REMOTE_S2_BUTTON:
+	case MAX77843_MUIC_ADC_REMOTE_S3_BUTTON:
+	case MAX77843_MUIC_ADC_REMOTE_S4_BUTTON:
+	case MAX77843_MUIC_ADC_REMOTE_S5_BUTTON:
+	case MAX77843_MUIC_ADC_REMOTE_S6_BUTTON:
+	case MAX77843_MUIC_ADC_REMOTE_S7_BUTTON:
+	case MAX77843_MUIC_ADC_REMOTE_S8_BUTTON:
+	case MAX77843_MUIC_ADC_REMOTE_S9_BUTTON:
+	case MAX77843_MUIC_ADC_REMOTE_S10_BUTTON:
+	case MAX77843_MUIC_ADC_REMOTE_S11_BUTTON:
+	case MAX77843_MUIC_ADC_REMOTE_S12_BUTTON:
+	case MAX77843_MUIC_ADC_RESERVED_ACC_1:
+	case MAX77843_MUIC_ADC_RESERVED_ACC_2:
+	case MAX77843_MUIC_ADC_RESERVED_ACC_4:
+	case MAX77843_MUIC_ADC_RESERVED_ACC_5:
+	case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2:
+	case MAX77843_MUIC_ADC_PHONE_POWERED_DEV:
+	case MAX77843_MUIC_ADC_TTY_CONVERTER:
+	case MAX77843_MUIC_ADC_UART_CABLE:
+	case MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG:
+	case MAX77843_MUIC_ADC_AV_CABLE_NOLOAD:
+	case MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG:
+	case MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON:
+	case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1:
+	case MAX77843_MUIC_ADC_OPEN:
+		dev_err(info->dev,
+			"accessory is %s but it isn't used (adc:0x%x)\n",
+			attached ? "attached" : "detached", cable_type);
+		return -EAGAIN;
+	default:
+		dev_err(info->dev,
+			"failed to detect %s accessory (adc:0x%x)\n",
+			attached ? "attached" : "detached", cable_type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int max77843_muic_chg_handler(struct max77843_muic_info *info)
+{
+	int ret, chg_type, gnd_type;
+	bool attached;
+
+	chg_type = max77843_muic_get_cable_type(info,
+			MAX77843_CABLE_GROUP_CHG, &attached);
+
+	dev_dbg(info->dev,
+		"external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n",
+		attached ? "attached" : "detached",
+		chg_type, info->prev_chg_type);
+
+	switch (chg_type) {
+	case MAX77843_MUIC_CHG_USB:
+		ret = max77843_muic_set_path(info,
+					     MAX77843_MUIC_CONTROL1_SW_USB,
+					     attached, false);
+		if (ret < 0)
+			return ret;
+
+		extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
+					attached);
+		break;
+	case MAX77843_MUIC_CHG_DOWNSTREAM:
+		ret = max77843_muic_set_path(info,
+					     MAX77843_MUIC_CONTROL1_SW_OPEN,
+					     attached, false);
+		if (ret < 0)
+			return ret;
+
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
+					attached);
+		break;
+	case MAX77843_MUIC_CHG_DEDICATED:
+		ret = max77843_muic_set_path(info,
+					     MAX77843_MUIC_CONTROL1_SW_OPEN,
+					     attached, false);
+		if (ret < 0)
+			return ret;
+
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
+					attached);
+		break;
+	case MAX77843_MUIC_CHG_SPECIAL_500MA:
+		ret = max77843_muic_set_path(info,
+					     MAX77843_MUIC_CONTROL1_SW_OPEN,
+					     attached, false);
+		if (ret < 0)
+			return ret;
+
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
+					attached);
+		break;
+	case MAX77843_MUIC_CHG_SPECIAL_1A:
+		ret = max77843_muic_set_path(info,
+					     MAX77843_MUIC_CONTROL1_SW_OPEN,
+					     attached, false);
+		if (ret < 0)
+			return ret;
+
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
+					attached);
+		break;
+	case MAX77843_MUIC_CHG_GND:
+		gnd_type = max77843_muic_get_cable_type(info,
+				MAX77843_CABLE_GROUP_ADC_GND, &attached);
+
+		/* Charger cable on MHL accessory is attach or detach */
+		if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
+						true);
+		else if (gnd_type == MAX77843_MUIC_GND_MHL)
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
+						false);
+		break;
+	case MAX77843_MUIC_CHG_DOCK:
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, attached);
+		break;
+	case MAX77843_MUIC_CHG_NONE:
+		break;
+	default:
+		dev_err(info->dev,
+			"failed to detect %s accessory (chg_type:0x%x)\n",
+			attached ? "attached" : "detached", chg_type);
+
+		max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN,
+				       attached, false);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void max77843_muic_irq_work(struct work_struct *work)
+{
+	struct max77843_muic_info *info = container_of(work,
+			struct max77843_muic_info, irq_work);
+	struct max77693_dev *max77843 = info->max77843;
+	int ret = 0;
+
+	mutex_lock(&info->mutex);
+
+	ret = regmap_bulk_read(max77843->regmap_muic,
+			MAX77843_MUIC_REG_STATUS1, info->status,
+			MAX77843_MUIC_STATUS_NUM);
+	if (ret) {
+		dev_err(info->dev, "Cannot read STATUS registers\n");
+		mutex_unlock(&info->mutex);
+		return;
+	}
+
+	if (info->irq_adc) {
+		ret = max77843_muic_adc_handler(info);
+		if (ret)
+			dev_err(info->dev, "Unknown cable type\n");
+		info->irq_adc = false;
+	}
+
+	if (info->irq_chg) {
+		ret = max77843_muic_chg_handler(info);
+		if (ret)
+			dev_err(info->dev, "Unknown charger type\n");
+		info->irq_chg = false;
+	}
+
+	mutex_unlock(&info->mutex);
+}
+
+static irqreturn_t max77843_muic_irq_handler(int irq, void *data)
+{
+	struct max77843_muic_info *info = data;
+	int i, irq_type = -1;
+
+	for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++)
+		if (irq == max77843_muic_irqs[i].virq)
+			irq_type = max77843_muic_irqs[i].irq;
+
+	switch (irq_type) {
+	case MAX77843_MUIC_IRQ_INT1_ADC:
+	case MAX77843_MUIC_IRQ_INT1_ADCERROR:
+	case MAX77843_MUIC_IRQ_INT1_ADC1K:
+		info->irq_adc = true;
+		break;
+	case MAX77843_MUIC_IRQ_INT2_CHGTYP:
+	case MAX77843_MUIC_IRQ_INT2_CHGDETRUN:
+	case MAX77843_MUIC_IRQ_INT2_DCDTMR:
+	case MAX77843_MUIC_IRQ_INT2_DXOVP:
+	case MAX77843_MUIC_IRQ_INT2_VBVOLT:
+		info->irq_chg = true;
+		break;
+	case MAX77843_MUIC_IRQ_INT3_VBADC:
+	case MAX77843_MUIC_IRQ_INT3_VDNMON:
+	case MAX77843_MUIC_IRQ_INT3_DNRES:
+	case MAX77843_MUIC_IRQ_INT3_MPNACK:
+	case MAX77843_MUIC_IRQ_INT3_MRXBUFOW:
+	case MAX77843_MUIC_IRQ_INT3_MRXTRF:
+	case MAX77843_MUIC_IRQ_INT3_MRXPERR:
+	case MAX77843_MUIC_IRQ_INT3_MRXRDY:
+		break;
+	default:
+		dev_err(info->dev, "Cannot recognize IRQ(%d)\n", irq_type);
+		break;
+	}
+
+	schedule_work(&info->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+static void max77843_muic_detect_cable_wq(struct work_struct *work)
+{
+	struct max77843_muic_info *info = container_of(to_delayed_work(work),
+			struct max77843_muic_info, wq_detcable);
+	struct max77693_dev *max77843 = info->max77843;
+	int chg_type, adc, ret;
+	bool attached;
+
+	mutex_lock(&info->mutex);
+
+	ret = regmap_bulk_read(max77843->regmap_muic,
+			MAX77843_MUIC_REG_STATUS1, info->status,
+			MAX77843_MUIC_STATUS_NUM);
+	if (ret) {
+		dev_err(info->dev, "Cannot read STATUS registers\n");
+		goto err_cable_wq;
+	}
+
+	adc = max77843_muic_get_cable_type(info,
+			MAX77843_CABLE_GROUP_ADC, &attached);
+	if (attached && adc != MAX77843_MUIC_ADC_OPEN) {
+		ret = max77843_muic_adc_handler(info);
+		if (ret < 0) {
+			dev_err(info->dev, "Cannot detect accessory\n");
+			goto err_cable_wq;
+		}
+	}
+
+	chg_type = max77843_muic_get_cable_type(info,
+			MAX77843_CABLE_GROUP_CHG, &attached);
+	if (attached && chg_type != MAX77843_MUIC_CHG_NONE) {
+		ret = max77843_muic_chg_handler(info);
+		if (ret < 0) {
+			dev_err(info->dev, "Cannot detect charger accessory\n");
+			goto err_cable_wq;
+		}
+	}
+
+err_cable_wq:
+	mutex_unlock(&info->mutex);
+}
+
+static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
+		enum max77843_muic_adc_debounce_time time)
+{
+	struct max77693_dev *max77843 = info->max77843;
+	int ret;
+
+	switch (time) {
+	case MAX77843_DEBOUNCE_TIME_5MS:
+	case MAX77843_DEBOUNCE_TIME_10MS:
+	case MAX77843_DEBOUNCE_TIME_25MS:
+	case MAX77843_DEBOUNCE_TIME_38_62MS:
+		ret = regmap_update_bits(max77843->regmap_muic,
+				MAX77843_MUIC_REG_CONTROL4,
+				MAX77843_MUIC_CONTROL4_ADCDBSET_MASK,
+				time << MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT);
+		if (ret < 0) {
+			dev_err(info->dev, "Cannot write MUIC regmap\n");
+			return ret;
+		}
+		break;
+	default:
+		dev_err(info->dev, "Invalid ADC debounce time\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int max77843_init_muic_regmap(struct max77693_dev *max77843)
+{
+	int ret;
+
+	max77843->i2c_muic = i2c_new_dummy_device(max77843->i2c->adapter,
+			I2C_ADDR_MUIC);
+	if (IS_ERR(max77843->i2c_muic)) {
+		dev_err(&max77843->i2c->dev,
+				"Cannot allocate I2C device for MUIC\n");
+		return PTR_ERR(max77843->i2c_muic);
+	}
+
+	i2c_set_clientdata(max77843->i2c_muic, max77843);
+
+	max77843->regmap_muic = devm_regmap_init_i2c(max77843->i2c_muic,
+			&max77843_muic_regmap_config);
+	if (IS_ERR(max77843->regmap_muic)) {
+		ret = PTR_ERR(max77843->regmap_muic);
+		goto err_muic_i2c;
+	}
+
+	ret = regmap_add_irq_chip(max77843->regmap_muic, max77843->irq,
+			IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
+			0, &max77843_muic_irq_chip, &max77843->irq_data_muic);
+	if (ret < 0) {
+		dev_err(&max77843->i2c->dev, "Cannot add MUIC IRQ chip\n");
+		goto err_muic_i2c;
+	}
+
+	return 0;
+
+err_muic_i2c:
+	i2c_unregister_device(max77843->i2c_muic);
+
+	return ret;
+}
+
+static int max77843_muic_probe(struct platform_device *pdev)
+{
+	struct max77693_dev *max77843 = dev_get_drvdata(pdev->dev.parent);
+	struct max77843_muic_info *info;
+	unsigned int id;
+	int cable_type;
+	bool attached;
+	int i, ret;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->dev = &pdev->dev;
+	info->max77843 = max77843;
+
+	platform_set_drvdata(pdev, info);
+	mutex_init(&info->mutex);
+
+	/* Initialize i2c and regmap */
+	ret = max77843_init_muic_regmap(max77843);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to init MUIC regmap\n");
+		return ret;
+	}
+
+	/* Turn off auto detection configuration */
+	ret = regmap_update_bits(max77843->regmap_muic,
+			MAX77843_MUIC_REG_CONTROL4,
+			MAX77843_MUIC_CONTROL4_USBAUTO_MASK |
+			MAX77843_MUIC_CONTROL4_FCTAUTO_MASK,
+			CONTROL4_AUTO_DISABLE);
+
+	/* Initialize extcon device */
+	info->edev = devm_extcon_dev_allocate(&pdev->dev,
+			max77843_extcon_cable);
+	if (IS_ERR(info->edev)) {
+		dev_err(&pdev->dev, "Failed to allocate memory for extcon\n");
+		ret = PTR_ERR(info->edev);
+		goto err_muic_irq;
+	}
+
+	ret = devm_extcon_dev_register(&pdev->dev, info->edev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register extcon device\n");
+		goto err_muic_irq;
+	}
+
+	/* Set ADC debounce time */
+	max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS);
+
+	/* Set initial path for UART when JIG is connected to get serial logs */
+	ret = regmap_bulk_read(max77843->regmap_muic,
+			MAX77843_MUIC_REG_STATUS1, info->status,
+			MAX77843_MUIC_STATUS_NUM);
+	if (ret) {
+		dev_err(info->dev, "Cannot read STATUS registers\n");
+		goto err_muic_irq;
+	}
+	cable_type = max77843_muic_get_cable_type(info, MAX77843_CABLE_GROUP_ADC,
+					 &attached);
+	if (attached && cable_type == MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF)
+		max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART,
+				       true, false);
+
+	/* Check revision number of MUIC device */
+	ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to read revision number\n");
+		goto err_muic_irq;
+	}
+	dev_info(info->dev, "MUIC device ID : 0x%x\n", id);
+
+	/* Support virtual irq domain for max77843 MUIC device */
+	INIT_WORK(&info->irq_work, max77843_muic_irq_work);
+
+	/* Clear IRQ bits before request IRQs */
+	ret = regmap_bulk_read(max77843->regmap_muic,
+			MAX77843_MUIC_REG_INT1, info->status,
+			MAX77843_MUIC_STATUS_NUM);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to Clear IRQ bits\n");
+		goto err_muic_irq;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++) {
+		struct max77843_muic_irq *muic_irq = &max77843_muic_irqs[i];
+		int virq = 0;
+
+		virq = regmap_irq_get_virq(max77843->irq_data_muic,
+				muic_irq->irq);
+		if (virq <= 0) {
+			ret = -EINVAL;
+			goto err_muic_irq;
+		}
+		muic_irq->virq = virq;
+
+		ret = devm_request_threaded_irq(&pdev->dev, virq, NULL,
+				max77843_muic_irq_handler, IRQF_NO_SUSPEND,
+				muic_irq->name, info);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"Failed to request irq (IRQ: %d, error: %d)\n",
+				muic_irq->irq, ret);
+			goto err_muic_irq;
+		}
+	}
+
+	/* Detect accessory after completing the initialization of platform */
+	INIT_DELAYED_WORK(&info->wq_detcable, max77843_muic_detect_cable_wq);
+	queue_delayed_work(system_power_efficient_wq,
+			&info->wq_detcable, msecs_to_jiffies(DELAY_MS_DEFAULT));
+
+	return 0;
+
+err_muic_irq:
+	regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
+	i2c_unregister_device(max77843->i2c_muic);
+
+	return ret;
+}
+
+static int max77843_muic_remove(struct platform_device *pdev)
+{
+	struct max77843_muic_info *info = platform_get_drvdata(pdev);
+	struct max77693_dev *max77843 = info->max77843;
+
+	cancel_work_sync(&info->irq_work);
+	regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
+	i2c_unregister_device(max77843->i2c_muic);
+
+	return 0;
+}
+
+static const struct platform_device_id max77843_muic_id[] = {
+	{ "max77843-muic", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, max77843_muic_id);
+
+static struct platform_driver max77843_muic_driver = {
+	.driver		= {
+		.name		= "max77843-muic",
+	},
+	.probe		= max77843_muic_probe,
+	.remove		= max77843_muic_remove,
+	.id_table	= max77843_muic_id,
+};
+
+static int __init max77843_muic_init(void)
+{
+	return platform_driver_register(&max77843_muic_driver);
+}
+subsys_initcall(max77843_muic_init);
+
+MODULE_DESCRIPTION("Maxim MAX77843 Extcon driver");
+MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
+MODULE_LICENSE("GPL");