Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 359 insertions, 0 deletions

diff --git a/drivers/extcon/extcon-ptn5150.c b/drivers/extcon/extcon-ptn5150.c
new file mode 100644
index 000000000..017a07197
--- /dev/null
+++ b/drivers/extcon/extcon-ptn5150.c
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// extcon-ptn5150.c - PTN5150 CC logic extcon driver to support USB detection
+//
+// Based on extcon-sm5502.c driver
+// Copyright (c) 2018-2019 by Vijai Kumar K
+// Author: Vijai Kumar K <vijaikumar.kanagarajan@gmail.com>
+// Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+
+#include <linux/bitfield.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/extcon-provider.h>
+#include <linux/gpio/consumer.h>
+#include <linux/usb/role.h>
+
+/* PTN5150 registers */
+#define PTN5150_REG_DEVICE_ID			0x01
+#define PTN5150_REG_CONTROL			0x02
+#define PTN5150_REG_INT_STATUS			0x03
+#define PTN5150_REG_CC_STATUS			0x04
+#define PTN5150_REG_CON_DET			0x09
+#define PTN5150_REG_VCONN_STATUS		0x0a
+#define PTN5150_REG_RESET			0x0b
+#define PTN5150_REG_INT_MASK			0x18
+#define PTN5150_REG_INT_REG_STATUS		0x19
+#define PTN5150_REG_END				PTN5150_REG_INT_REG_STATUS
+
+#define PTN5150_DFP_ATTACHED			0x1
+#define PTN5150_UFP_ATTACHED			0x2
+
+/* Define PTN5150 MASK/SHIFT constant */
+#define PTN5150_REG_DEVICE_ID_VERSION		GENMASK(7, 3)
+#define PTN5150_REG_DEVICE_ID_VENDOR		GENMASK(2, 0)
+
+#define PTN5150_REG_CC_PORT_ATTACHMENT		GENMASK(4, 2)
+#define PTN5150_REG_CC_VBUS_DETECTION		BIT(7)
+#define PTN5150_REG_INT_CABLE_ATTACH_MASK	BIT(0)
+#define PTN5150_REG_INT_CABLE_DETACH_MASK	BIT(1)
+
+struct ptn5150_info {
+	struct device *dev;
+	struct extcon_dev *edev;
+	struct i2c_client *i2c;
+	struct regmap *regmap;
+	struct gpio_desc *int_gpiod;
+	struct gpio_desc *vbus_gpiod;
+	int irq;
+	struct work_struct irq_work;
+	struct mutex mutex;
+	struct usb_role_switch *role_sw;
+};
+
+/* List of detectable cables */
+static const unsigned int ptn5150_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_NONE,
+};
+
+static const struct regmap_config ptn5150_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= PTN5150_REG_END,
+};
+
+static void ptn5150_check_state(struct ptn5150_info *info)
+{
+	unsigned int port_status, reg_data, vbus;
+	enum usb_role usb_role = USB_ROLE_NONE;
+	int ret;
+
+	ret = regmap_read(info->regmap, PTN5150_REG_CC_STATUS, &reg_data);
+	if (ret) {
+		dev_err(info->dev, "failed to read CC STATUS %d\n", ret);
+		return;
+	}
+
+	port_status = FIELD_GET(PTN5150_REG_CC_PORT_ATTACHMENT, reg_data);
+
+	switch (port_status) {
+	case PTN5150_DFP_ATTACHED:
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, false);
+		gpiod_set_value_cansleep(info->vbus_gpiod, 0);
+		extcon_set_state_sync(info->edev, EXTCON_USB, true);
+		usb_role = USB_ROLE_DEVICE;
+		break;
+	case PTN5150_UFP_ATTACHED:
+		extcon_set_state_sync(info->edev, EXTCON_USB, false);
+		vbus = FIELD_GET(PTN5150_REG_CC_VBUS_DETECTION, reg_data);
+		if (vbus)
+			gpiod_set_value_cansleep(info->vbus_gpiod, 0);
+		else
+			gpiod_set_value_cansleep(info->vbus_gpiod, 1);
+
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, true);
+		usb_role = USB_ROLE_HOST;
+		break;
+	default:
+		break;
+	}
+
+	if (usb_role) {
+		ret = usb_role_switch_set_role(info->role_sw, usb_role);
+		if (ret)
+			dev_err(info->dev, "failed to set %s role: %d\n",
+				usb_role_string(usb_role), ret);
+	}
+}
+
+static void ptn5150_irq_work(struct work_struct *work)
+{
+	struct ptn5150_info *info = container_of(work,
+			struct ptn5150_info, irq_work);
+	int ret = 0;
+	unsigned int int_status;
+
+	if (!info->edev)
+		return;
+
+	mutex_lock(&info->mutex);
+
+	/* Clear interrupt. Read would clear the register */
+	ret = regmap_read(info->regmap, PTN5150_REG_INT_STATUS, &int_status);
+	if (ret) {
+		dev_err(info->dev, "failed to read INT STATUS %d\n", ret);
+		mutex_unlock(&info->mutex);
+		return;
+	}
+
+	if (int_status) {
+		unsigned int cable_attach;
+
+		cable_attach = int_status & PTN5150_REG_INT_CABLE_ATTACH_MASK;
+		if (cable_attach) {
+			ptn5150_check_state(info);
+		} else {
+			extcon_set_state_sync(info->edev,
+					EXTCON_USB_HOST, false);
+			extcon_set_state_sync(info->edev,
+					EXTCON_USB, false);
+			gpiod_set_value_cansleep(info->vbus_gpiod, 0);
+
+			ret = usb_role_switch_set_role(info->role_sw,
+						       USB_ROLE_NONE);
+			if (ret)
+				dev_err(info->dev,
+					"failed to set none role: %d\n",
+					ret);
+		}
+	}
+
+	/* Clear interrupt. Read would clear the register */
+	ret = regmap_read(info->regmap, PTN5150_REG_INT_REG_STATUS,
+			&int_status);
+	if (ret) {
+		dev_err(info->dev,
+			"failed to read INT REG STATUS %d\n", ret);
+		mutex_unlock(&info->mutex);
+		return;
+	}
+
+	mutex_unlock(&info->mutex);
+}
+
+
+static irqreturn_t ptn5150_irq_handler(int irq, void *data)
+{
+	struct ptn5150_info *info = data;
+
+	schedule_work(&info->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+static int ptn5150_init_dev_type(struct ptn5150_info *info)
+{
+	unsigned int reg_data, vendor_id, version_id;
+	int ret;
+
+	ret = regmap_read(info->regmap, PTN5150_REG_DEVICE_ID, &reg_data);
+	if (ret) {
+		dev_err(info->dev, "failed to read DEVICE_ID %d\n", ret);
+		return -EINVAL;
+	}
+
+	vendor_id = FIELD_GET(PTN5150_REG_DEVICE_ID_VENDOR, reg_data);
+	version_id = FIELD_GET(PTN5150_REG_DEVICE_ID_VERSION, reg_data);
+	dev_dbg(info->dev, "Device type: version: 0x%x, vendor: 0x%x\n",
+		version_id, vendor_id);
+
+	/* Clear any existing interrupts */
+	ret = regmap_read(info->regmap, PTN5150_REG_INT_STATUS, &reg_data);
+	if (ret) {
+		dev_err(info->dev,
+			"failed to read PTN5150_REG_INT_STATUS %d\n",
+			ret);
+		return -EINVAL;
+	}
+
+	ret = regmap_read(info->regmap, PTN5150_REG_INT_REG_STATUS, &reg_data);
+	if (ret) {
+		dev_err(info->dev,
+			"failed to read PTN5150_REG_INT_REG_STATUS %d\n", ret);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void ptn5150_work_sync_and_put(void *data)
+{
+	struct ptn5150_info *info = data;
+
+	cancel_work_sync(&info->irq_work);
+	usb_role_switch_put(info->role_sw);
+}
+
+static int ptn5150_i2c_probe(struct i2c_client *i2c)
+{
+	struct device *dev = &i2c->dev;
+	struct device_node *np = i2c->dev.of_node;
+	struct ptn5150_info *info;
+	int ret;
+
+	if (!np)
+		return -EINVAL;
+
+	info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+	i2c_set_clientdata(i2c, info);
+
+	info->dev = &i2c->dev;
+	info->i2c = i2c;
+	info->vbus_gpiod = devm_gpiod_get(&i2c->dev, "vbus", GPIOD_OUT_LOW);
+	if (IS_ERR(info->vbus_gpiod)) {
+		ret = PTR_ERR(info->vbus_gpiod);
+		if (ret == -ENOENT) {
+			dev_info(dev, "No VBUS GPIO, ignoring VBUS control\n");
+			info->vbus_gpiod = NULL;
+		} else {
+			return dev_err_probe(dev, ret, "failed to get VBUS GPIO\n");
+		}
+	}
+
+	mutex_init(&info->mutex);
+
+	INIT_WORK(&info->irq_work, ptn5150_irq_work);
+
+	info->regmap = devm_regmap_init_i2c(i2c, &ptn5150_regmap_config);
+	if (IS_ERR(info->regmap)) {
+		return dev_err_probe(info->dev, PTR_ERR(info->regmap),
+				     "failed to allocate register map\n");
+	}
+
+	if (i2c->irq > 0) {
+		info->irq = i2c->irq;
+	} else {
+		info->int_gpiod = devm_gpiod_get(&i2c->dev, "int", GPIOD_IN);
+		if (IS_ERR(info->int_gpiod)) {
+			return dev_err_probe(dev, PTR_ERR(info->int_gpiod),
+					     "failed to get INT GPIO\n");
+		}
+
+		info->irq = gpiod_to_irq(info->int_gpiod);
+		if (info->irq < 0) {
+			dev_err(dev, "failed to get INTB IRQ\n");
+			return info->irq;
+		}
+	}
+
+	ret = devm_request_threaded_irq(dev, info->irq, NULL,
+					ptn5150_irq_handler,
+					IRQF_TRIGGER_FALLING |
+					IRQF_ONESHOT,
+					i2c->name, info);
+	if (ret < 0) {
+		dev_err(dev, "failed to request handler for INTB IRQ\n");
+		return ret;
+	}
+
+	/* Allocate extcon device */
+	info->edev = devm_extcon_dev_allocate(info->dev, ptn5150_extcon_cable);
+	if (IS_ERR(info->edev)) {
+		dev_err(info->dev, "failed to allocate memory for extcon\n");
+		return -ENOMEM;
+	}
+
+	/* Register extcon device */
+	ret = devm_extcon_dev_register(info->dev, info->edev);
+	if (ret) {
+		dev_err(info->dev, "failed to register extcon device\n");
+		return ret;
+	}
+
+	extcon_set_property_capability(info->edev, EXTCON_USB,
+					EXTCON_PROP_USB_VBUS);
+	extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
+					EXTCON_PROP_USB_VBUS);
+	extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
+					EXTCON_PROP_USB_TYPEC_POLARITY);
+
+	/* Initialize PTN5150 device and print vendor id and version id */
+	ret = ptn5150_init_dev_type(info);
+	if (ret)
+		return -EINVAL;
+
+	info->role_sw = usb_role_switch_get(info->dev);
+	if (IS_ERR(info->role_sw))
+		return dev_err_probe(info->dev, PTR_ERR(info->role_sw),
+				     "failed to get role switch\n");
+
+	ret = devm_add_action_or_reset(dev, ptn5150_work_sync_and_put, info);
+	if (ret)
+		return ret;
+
+	/*
+	 * Update current extcon state if for example OTG connection was there
+	 * before the probe
+	 */
+	mutex_lock(&info->mutex);
+	ptn5150_check_state(info);
+	mutex_unlock(&info->mutex);
+
+	return 0;
+}
+
+static const struct of_device_id ptn5150_dt_match[] = {
+	{ .compatible = "nxp,ptn5150" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ptn5150_dt_match);
+
+static const struct i2c_device_id ptn5150_i2c_id[] = {
+	{ "ptn5150", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ptn5150_i2c_id);
+
+static struct i2c_driver ptn5150_i2c_driver = {
+	.driver		= {
+		.name	= "ptn5150",
+		.of_match_table = ptn5150_dt_match,
+	},
+	.probe_new	= ptn5150_i2c_probe,
+	.id_table = ptn5150_i2c_id,
+};
+module_i2c_driver(ptn5150_i2c_driver);
+
+MODULE_DESCRIPTION("NXP PTN5150 CC logic Extcon driver");
+MODULE_AUTHOR("Vijai Kumar K <vijaikumar.kanagarajan@gmail.com>");
+MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
+MODULE_LICENSE("GPL v2");