Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 542 insertions, 0 deletions

diff --git a/drivers/extcon/extcon-usbc-cros-ec.c b/drivers/extcon/extcon-usbc-cros-ec.c
new file mode 100644
index 000000000..fde1db62b
--- /dev/null
+++ b/drivers/extcon/extcon-usbc-cros-ec.c
@@ -0,0 +1,542 @@
+// SPDX-License-Identifier: GPL-2.0
+// ChromeOS Embedded Controller extcon
+//
+// Copyright (C) 2017 Google, Inc.
+// Author: Benson Leung <bleung@chromium.org>
+
+#include <linux/extcon-provider.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+
+struct cros_ec_extcon_info {
+	struct device *dev;
+	struct extcon_dev *edev;
+
+	int port_id;
+
+	struct cros_ec_device *ec;
+
+	struct notifier_block notifier;
+
+	unsigned int dr; /* data role */
+	bool pr; /* power role (true if VBUS enabled) */
+	bool dp; /* DisplayPort enabled */
+	bool mux; /* SuperSpeed (usb3) enabled */
+	unsigned int power_type;
+};
+
+static const unsigned int usb_type_c_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_DISP_DP,
+	EXTCON_NONE,
+};
+
+enum usb_data_roles {
+	DR_NONE,
+	DR_HOST,
+	DR_DEVICE,
+};
+
+/**
+ * cros_ec_pd_command() - Send a command to the EC.
+ * @info: pointer to struct cros_ec_extcon_info
+ * @command: EC command
+ * @version: EC command version
+ * @outdata: EC command output data
+ * @outsize: Size of outdata
+ * @indata: EC command input data
+ * @insize: Size of indata
+ *
+ * Return: 0 on success, <0 on failure.
+ */
+static int cros_ec_pd_command(struct cros_ec_extcon_info *info,
+			      unsigned int command,
+			      unsigned int version,
+			      void *outdata,
+			      unsigned int outsize,
+			      void *indata,
+			      unsigned int insize)
+{
+	struct cros_ec_command *msg;
+	int ret;
+
+	msg = kzalloc(struct_size(msg, data, max(outsize, insize)), GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	msg->version = version;
+	msg->command = command;
+	msg->outsize = outsize;
+	msg->insize = insize;
+
+	if (outsize)
+		memcpy(msg->data, outdata, outsize);
+
+	ret = cros_ec_cmd_xfer_status(info->ec, msg);
+	if (ret >= 0 && insize)
+		memcpy(indata, msg->data, insize);
+
+	kfree(msg);
+	return ret;
+}
+
+/**
+ * cros_ec_usb_get_power_type() - Get power type info about PD device attached
+ * to given port.
+ * @info: pointer to struct cros_ec_extcon_info
+ *
+ * Return: power type on success, <0 on failure.
+ */
+static int cros_ec_usb_get_power_type(struct cros_ec_extcon_info *info)
+{
+	struct ec_params_usb_pd_power_info req;
+	struct ec_response_usb_pd_power_info resp;
+	int ret;
+
+	req.port = info->port_id;
+	ret = cros_ec_pd_command(info, EC_CMD_USB_PD_POWER_INFO, 0,
+				 &req, sizeof(req), &resp, sizeof(resp));
+	if (ret < 0)
+		return ret;
+
+	return resp.type;
+}
+
+/**
+ * cros_ec_usb_get_pd_mux_state() - Get PD mux state for given port.
+ * @info: pointer to struct cros_ec_extcon_info
+ *
+ * Return: PD mux state on success, <0 on failure.
+ */
+static int cros_ec_usb_get_pd_mux_state(struct cros_ec_extcon_info *info)
+{
+	struct ec_params_usb_pd_mux_info req;
+	struct ec_response_usb_pd_mux_info resp;
+	int ret;
+
+	req.port = info->port_id;
+	ret = cros_ec_pd_command(info, EC_CMD_USB_PD_MUX_INFO, 0,
+				 &req, sizeof(req),
+				 &resp, sizeof(resp));
+	if (ret < 0)
+		return ret;
+
+	return resp.flags;
+}
+
+/**
+ * cros_ec_usb_get_role() - Get role info about possible PD device attached to a
+ * given port.
+ * @info: pointer to struct cros_ec_extcon_info
+ * @polarity: pointer to cable polarity (return value)
+ *
+ * Return: role info on success, -ENOTCONN if no cable is connected, <0 on
+ * failure.
+ */
+static int cros_ec_usb_get_role(struct cros_ec_extcon_info *info,
+				bool *polarity)
+{
+	struct ec_params_usb_pd_control pd_control;
+	struct ec_response_usb_pd_control_v1 resp;
+	int ret;
+
+	pd_control.port = info->port_id;
+	pd_control.role = USB_PD_CTRL_ROLE_NO_CHANGE;
+	pd_control.mux = USB_PD_CTRL_MUX_NO_CHANGE;
+	pd_control.swap = USB_PD_CTRL_SWAP_NONE;
+	ret = cros_ec_pd_command(info, EC_CMD_USB_PD_CONTROL, 1,
+				 &pd_control, sizeof(pd_control),
+				 &resp, sizeof(resp));
+	if (ret < 0)
+		return ret;
+
+	if (!(resp.enabled & PD_CTRL_RESP_ENABLED_CONNECTED))
+		return -ENOTCONN;
+
+	*polarity = resp.polarity;
+
+	return resp.role;
+}
+
+/**
+ * cros_ec_pd_get_num_ports() - Get number of EC charge ports.
+ * @info: pointer to struct cros_ec_extcon_info
+ *
+ * Return: number of ports on success, <0 on failure.
+ */
+static int cros_ec_pd_get_num_ports(struct cros_ec_extcon_info *info)
+{
+	struct ec_response_usb_pd_ports resp;
+	int ret;
+
+	ret = cros_ec_pd_command(info, EC_CMD_USB_PD_PORTS,
+				 0, NULL, 0, &resp, sizeof(resp));
+	if (ret < 0)
+		return ret;
+
+	return resp.num_ports;
+}
+
+static const char *cros_ec_usb_role_string(unsigned int role)
+{
+	return role == DR_NONE ? "DISCONNECTED" :
+		(role == DR_HOST ? "DFP" : "UFP");
+}
+
+static const char *cros_ec_usb_power_type_string(unsigned int type)
+{
+	switch (type) {
+	case USB_CHG_TYPE_NONE:
+		return "USB_CHG_TYPE_NONE";
+	case USB_CHG_TYPE_PD:
+		return "USB_CHG_TYPE_PD";
+	case USB_CHG_TYPE_PROPRIETARY:
+		return "USB_CHG_TYPE_PROPRIETARY";
+	case USB_CHG_TYPE_C:
+		return "USB_CHG_TYPE_C";
+	case USB_CHG_TYPE_BC12_DCP:
+		return "USB_CHG_TYPE_BC12_DCP";
+	case USB_CHG_TYPE_BC12_CDP:
+		return "USB_CHG_TYPE_BC12_CDP";
+	case USB_CHG_TYPE_BC12_SDP:
+		return "USB_CHG_TYPE_BC12_SDP";
+	case USB_CHG_TYPE_OTHER:
+		return "USB_CHG_TYPE_OTHER";
+	case USB_CHG_TYPE_VBUS:
+		return "USB_CHG_TYPE_VBUS";
+	case USB_CHG_TYPE_UNKNOWN:
+		return "USB_CHG_TYPE_UNKNOWN";
+	default:
+		return "USB_CHG_TYPE_UNKNOWN";
+	}
+}
+
+static bool cros_ec_usb_power_type_is_wall_wart(unsigned int type,
+						unsigned int role)
+{
+	switch (type) {
+	/* FIXME : Guppy, Donnettes, and other chargers will be miscategorized
+	 * because they identify with USB_CHG_TYPE_C, but we can't return true
+	 * here from that code because that breaks Suzy-Q and other kinds of
+	 * USB Type-C cables and peripherals.
+	 */
+	case USB_CHG_TYPE_PROPRIETARY:
+	case USB_CHG_TYPE_BC12_DCP:
+		return true;
+	case USB_CHG_TYPE_PD:
+	case USB_CHG_TYPE_C:
+	case USB_CHG_TYPE_BC12_CDP:
+	case USB_CHG_TYPE_BC12_SDP:
+	case USB_CHG_TYPE_OTHER:
+	case USB_CHG_TYPE_VBUS:
+	case USB_CHG_TYPE_UNKNOWN:
+	case USB_CHG_TYPE_NONE:
+	default:
+		return false;
+	}
+}
+
+static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
+				       bool force)
+{
+	struct device *dev = info->dev;
+	int role, power_type;
+	unsigned int dr = DR_NONE;
+	bool pr = false;
+	bool polarity = false;
+	bool dp = false;
+	bool mux = false;
+	bool hpd = false;
+
+	power_type = cros_ec_usb_get_power_type(info);
+	if (power_type < 0) {
+		dev_err(dev, "failed getting power type err = %d\n",
+			power_type);
+		return power_type;
+	}
+
+	role = cros_ec_usb_get_role(info, &polarity);
+	if (role < 0) {
+		if (role != -ENOTCONN) {
+			dev_err(dev, "failed getting role err = %d\n", role);
+			return role;
+		}
+		dev_dbg(dev, "disconnected\n");
+	} else {
+		int pd_mux_state;
+
+		dr = (role & PD_CTRL_RESP_ROLE_DATA) ? DR_HOST : DR_DEVICE;
+		pr = (role & PD_CTRL_RESP_ROLE_POWER);
+		pd_mux_state = cros_ec_usb_get_pd_mux_state(info);
+		if (pd_mux_state < 0)
+			pd_mux_state = USB_PD_MUX_USB_ENABLED;
+
+		dp = pd_mux_state & USB_PD_MUX_DP_ENABLED;
+		mux = pd_mux_state & USB_PD_MUX_USB_ENABLED;
+		hpd = pd_mux_state & USB_PD_MUX_HPD_IRQ;
+
+		dev_dbg(dev,
+			"connected role 0x%x pwr type %d dr %d pr %d pol %d mux %d dp %d hpd %d\n",
+			role, power_type, dr, pr, polarity, mux, dp, hpd);
+	}
+
+	/*
+	 * When there is no USB host (e.g. USB PD charger),
+	 * we are not really a UFP for the AP.
+	 */
+	if (dr == DR_DEVICE &&
+	    cros_ec_usb_power_type_is_wall_wart(power_type, role))
+		dr = DR_NONE;
+
+	if (force || info->dr != dr || info->pr != pr || info->dp != dp ||
+	    info->mux != mux || info->power_type != power_type) {
+		bool host_connected = false, device_connected = false;
+
+		dev_dbg(dev, "Type/Role switch! type = %s role = %s\n",
+			cros_ec_usb_power_type_string(power_type),
+			cros_ec_usb_role_string(dr));
+		info->dr = dr;
+		info->pr = pr;
+		info->dp = dp;
+		info->mux = mux;
+		info->power_type = power_type;
+
+		if (dr == DR_DEVICE)
+			device_connected = true;
+		else if (dr == DR_HOST)
+			host_connected = true;
+
+		extcon_set_state(info->edev, EXTCON_USB, device_connected);
+		extcon_set_state(info->edev, EXTCON_USB_HOST, host_connected);
+		extcon_set_state(info->edev, EXTCON_DISP_DP, dp);
+		extcon_set_property(info->edev, EXTCON_USB,
+				    EXTCON_PROP_USB_VBUS,
+				    (union extcon_property_value)(int)pr);
+		extcon_set_property(info->edev, EXTCON_USB_HOST,
+				    EXTCON_PROP_USB_VBUS,
+				    (union extcon_property_value)(int)pr);
+		extcon_set_property(info->edev, EXTCON_USB,
+				    EXTCON_PROP_USB_TYPEC_POLARITY,
+				    (union extcon_property_value)(int)polarity);
+		extcon_set_property(info->edev, EXTCON_USB_HOST,
+				    EXTCON_PROP_USB_TYPEC_POLARITY,
+				    (union extcon_property_value)(int)polarity);
+		extcon_set_property(info->edev, EXTCON_DISP_DP,
+				    EXTCON_PROP_USB_TYPEC_POLARITY,
+				    (union extcon_property_value)(int)polarity);
+		extcon_set_property(info->edev, EXTCON_USB,
+				    EXTCON_PROP_USB_SS,
+				    (union extcon_property_value)(int)mux);
+		extcon_set_property(info->edev, EXTCON_USB_HOST,
+				    EXTCON_PROP_USB_SS,
+				    (union extcon_property_value)(int)mux);
+		extcon_set_property(info->edev, EXTCON_DISP_DP,
+				    EXTCON_PROP_USB_SS,
+				    (union extcon_property_value)(int)mux);
+		extcon_set_property(info->edev, EXTCON_DISP_DP,
+				    EXTCON_PROP_DISP_HPD,
+				    (union extcon_property_value)(int)hpd);
+
+		extcon_sync(info->edev, EXTCON_USB);
+		extcon_sync(info->edev, EXTCON_USB_HOST);
+		extcon_sync(info->edev, EXTCON_DISP_DP);
+
+	} else if (hpd) {
+		extcon_set_property(info->edev, EXTCON_DISP_DP,
+				    EXTCON_PROP_DISP_HPD,
+				    (union extcon_property_value)(int)hpd);
+		extcon_sync(info->edev, EXTCON_DISP_DP);
+	}
+
+	return 0;
+}
+
+static int extcon_cros_ec_event(struct notifier_block *nb,
+				unsigned long queued_during_suspend,
+				void *_notify)
+{
+	struct cros_ec_extcon_info *info;
+	struct cros_ec_device *ec;
+	u32 host_event;
+
+	info = container_of(nb, struct cros_ec_extcon_info, notifier);
+	ec = info->ec;
+
+	host_event = cros_ec_get_host_event(ec);
+	if (host_event & (EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU) |
+			  EC_HOST_EVENT_MASK(EC_HOST_EVENT_USB_MUX))) {
+		extcon_cros_ec_detect_cable(info, false);
+		return NOTIFY_OK;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static int extcon_cros_ec_probe(struct platform_device *pdev)
+{
+	struct cros_ec_extcon_info *info;
+	struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	int numports, ret;
+
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->dev = dev;
+	info->ec = ec;
+
+	if (np) {
+		u32 port;
+
+		ret = of_property_read_u32(np, "google,usb-port-id", &port);
+		if (ret < 0) {
+			dev_err(dev, "Missing google,usb-port-id property\n");
+			return ret;
+		}
+		info->port_id = port;
+	} else {
+		info->port_id = pdev->id;
+	}
+
+	numports = cros_ec_pd_get_num_ports(info);
+	if (numports < 0) {
+		dev_err(dev, "failed getting number of ports! ret = %d\n",
+			numports);
+		return numports;
+	}
+
+	if (info->port_id >= numports) {
+		dev_err(dev, "This system only supports %d ports\n", numports);
+		return -ENODEV;
+	}
+
+	info->edev = devm_extcon_dev_allocate(dev, usb_type_c_cable);
+	if (IS_ERR(info->edev)) {
+		dev_err(dev, "failed to allocate extcon device\n");
+		return -ENOMEM;
+	}
+
+	ret = devm_extcon_dev_register(dev, info->edev);
+	if (ret < 0) {
+		dev_err(dev, "failed to register extcon device\n");
+		return ret;
+	}
+
+	extcon_set_property_capability(info->edev, EXTCON_USB,
+				       EXTCON_PROP_USB_VBUS);
+	extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
+				       EXTCON_PROP_USB_VBUS);
+	extcon_set_property_capability(info->edev, EXTCON_USB,
+				       EXTCON_PROP_USB_TYPEC_POLARITY);
+	extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
+				       EXTCON_PROP_USB_TYPEC_POLARITY);
+	extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
+				       EXTCON_PROP_USB_TYPEC_POLARITY);
+	extcon_set_property_capability(info->edev, EXTCON_USB,
+				       EXTCON_PROP_USB_SS);
+	extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
+				       EXTCON_PROP_USB_SS);
+	extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
+				       EXTCON_PROP_USB_SS);
+	extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
+				       EXTCON_PROP_DISP_HPD);
+
+	info->dr = DR_NONE;
+	info->pr = false;
+
+	platform_set_drvdata(pdev, info);
+
+	/* Get PD events from the EC */
+	info->notifier.notifier_call = extcon_cros_ec_event;
+	ret = blocking_notifier_chain_register(&info->ec->event_notifier,
+					       &info->notifier);
+	if (ret < 0) {
+		dev_err(dev, "failed to register notifier\n");
+		return ret;
+	}
+
+	/* Perform initial detection */
+	ret = extcon_cros_ec_detect_cable(info, true);
+	if (ret < 0) {
+		dev_err(dev, "failed to detect initial cable state\n");
+		goto unregister_notifier;
+	}
+
+	return 0;
+
+unregister_notifier:
+	blocking_notifier_chain_unregister(&info->ec->event_notifier,
+					   &info->notifier);
+	return ret;
+}
+
+static int extcon_cros_ec_remove(struct platform_device *pdev)
+{
+	struct cros_ec_extcon_info *info = platform_get_drvdata(pdev);
+
+	blocking_notifier_chain_unregister(&info->ec->event_notifier,
+					   &info->notifier);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int extcon_cros_ec_suspend(struct device *dev)
+{
+	return 0;
+}
+
+static int extcon_cros_ec_resume(struct device *dev)
+{
+	int ret;
+	struct cros_ec_extcon_info *info = dev_get_drvdata(dev);
+
+	ret = extcon_cros_ec_detect_cable(info, true);
+	if (ret < 0)
+		dev_err(dev, "failed to detect cable state on resume\n");
+
+	return 0;
+}
+
+static const struct dev_pm_ops extcon_cros_ec_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(extcon_cros_ec_suspend, extcon_cros_ec_resume)
+};
+
+#define DEV_PM_OPS	(&extcon_cros_ec_dev_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif /* CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_OF
+static const struct of_device_id extcon_cros_ec_of_match[] = {
+	{ .compatible = "google,extcon-usbc-cros-ec" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, extcon_cros_ec_of_match);
+#endif /* CONFIG_OF */
+
+static struct platform_driver extcon_cros_ec_driver = {
+	.driver = {
+		.name  = "extcon-usbc-cros-ec",
+		.of_match_table = of_match_ptr(extcon_cros_ec_of_match),
+		.pm = DEV_PM_OPS,
+	},
+	.remove  = extcon_cros_ec_remove,
+	.probe   = extcon_cros_ec_probe,
+};
+
+module_platform_driver(extcon_cros_ec_driver);
+
+MODULE_DESCRIPTION("ChromeOS Embedded Controller extcon driver");
+MODULE_AUTHOR("Benson Leung <bleung@chromium.org>");
+MODULE_LICENSE("GPL v2");