Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 645 insertions, 0 deletions

diff --git a/drivers/firmware/arm_scmi/optee.c b/drivers/firmware/arm_scmi/optee.c
new file mode 100644
index 000000000..2a7aeab40
--- /dev/null
+++ b/drivers/firmware/arm_scmi/optee.c
@@ -0,0 +1,645 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2021 Linaro Ltd.
+ */
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/tee_drv.h>
+#include <linux/uuid.h>
+#include <uapi/linux/tee.h>
+
+#include "common.h"
+
+#define SCMI_OPTEE_MAX_MSG_SIZE		128
+
+enum scmi_optee_pta_cmd {
+	/*
+	 * PTA_SCMI_CMD_CAPABILITIES - Get channel capabilities
+	 *
+	 * [out]    value[0].a: Capability bit mask (enum pta_scmi_caps)
+	 * [out]    value[0].b: Extended capabilities or 0
+	 */
+	PTA_SCMI_CMD_CAPABILITIES = 0,
+
+	/*
+	 * PTA_SCMI_CMD_PROCESS_SMT_CHANNEL - Process SCMI message in SMT buffer
+	 *
+	 * [in]     value[0].a: Channel handle
+	 *
+	 * Shared memory used for SCMI message/response exhange is expected
+	 * already identified and bound to channel handle in both SCMI agent
+	 * and SCMI server (OP-TEE) parts.
+	 * The memory uses SMT header to carry SCMI meta-data (protocol ID and
+	 * protocol message ID).
+	 */
+	PTA_SCMI_CMD_PROCESS_SMT_CHANNEL = 1,
+
+	/*
+	 * PTA_SCMI_CMD_PROCESS_SMT_CHANNEL_MESSAGE - Process SMT/SCMI message
+	 *
+	 * [in]     value[0].a: Channel handle
+	 * [in/out] memref[1]: Message/response buffer (SMT and SCMI payload)
+	 *
+	 * Shared memory used for SCMI message/response is a SMT buffer
+	 * referenced by param[1]. It shall be 128 bytes large to fit response
+	 * payload whatever message playload size.
+	 * The memory uses SMT header to carry SCMI meta-data (protocol ID and
+	 * protocol message ID).
+	 */
+	PTA_SCMI_CMD_PROCESS_SMT_CHANNEL_MESSAGE = 2,
+
+	/*
+	 * PTA_SCMI_CMD_GET_CHANNEL - Get channel handle
+	 *
+	 * SCMI shm information are 0 if agent expects to use OP-TEE regular SHM
+	 *
+	 * [in]     value[0].a: Channel identifier
+	 * [out]    value[0].a: Returned channel handle
+	 * [in]     value[0].b: Requested capabilities mask (enum pta_scmi_caps)
+	 */
+	PTA_SCMI_CMD_GET_CHANNEL = 3,
+
+	/*
+	 * PTA_SCMI_CMD_PROCESS_MSG_CHANNEL - Process SCMI message in a MSG
+	 * buffer pointed by memref parameters
+	 *
+	 * [in]     value[0].a: Channel handle
+	 * [in]     memref[1]: Message buffer (MSG and SCMI payload)
+	 * [out]    memref[2]: Response buffer (MSG and SCMI payload)
+	 *
+	 * Shared memories used for SCMI message/response are MSG buffers
+	 * referenced by param[1] and param[2]. MSG transport protocol
+	 * uses a 32bit header to carry SCMI meta-data (protocol ID and
+	 * protocol message ID) followed by the effective SCMI message
+	 * payload.
+	 */
+	PTA_SCMI_CMD_PROCESS_MSG_CHANNEL = 4,
+};
+
+/*
+ * OP-TEE SCMI service capabilities bit flags (32bit)
+ *
+ * PTA_SCMI_CAPS_SMT_HEADER
+ * When set, OP-TEE supports command using SMT header protocol (SCMI shmem) in
+ * shared memory buffers to carry SCMI protocol synchronisation information.
+ *
+ * PTA_SCMI_CAPS_MSG_HEADER
+ * When set, OP-TEE supports command using MSG header protocol in an OP-TEE
+ * shared memory to carry SCMI protocol synchronisation information and SCMI
+ * message payload.
+ */
+#define PTA_SCMI_CAPS_NONE		0
+#define PTA_SCMI_CAPS_SMT_HEADER	BIT(0)
+#define PTA_SCMI_CAPS_MSG_HEADER	BIT(1)
+#define PTA_SCMI_CAPS_MASK		(PTA_SCMI_CAPS_SMT_HEADER | \
+					 PTA_SCMI_CAPS_MSG_HEADER)
+
+/**
+ * struct scmi_optee_channel - Description of an OP-TEE SCMI channel
+ *
+ * @channel_id: OP-TEE channel ID used for this transport
+ * @tee_session: TEE session identifier
+ * @caps: OP-TEE SCMI channel capabilities
+ * @rx_len: Response size
+ * @mu: Mutex protection on channel access
+ * @cinfo: SCMI channel information
+ * @shmem: Virtual base address of the shared memory
+ * @req: Shared memory protocol handle for SCMI request and synchronous response
+ * @tee_shm: TEE shared memory handle @req or NULL if using IOMEM shmem
+ * @link: Reference in agent's channel list
+ */
+struct scmi_optee_channel {
+	u32 channel_id;
+	u32 tee_session;
+	u32 caps;
+	u32 rx_len;
+	struct mutex mu;
+	struct scmi_chan_info *cinfo;
+	union {
+		struct scmi_shared_mem __iomem *shmem;
+		struct scmi_msg_payld *msg;
+	} req;
+	struct tee_shm *tee_shm;
+	struct list_head link;
+};
+
+/**
+ * struct scmi_optee_agent - OP-TEE transport private data
+ *
+ * @dev: Device used for communication with TEE
+ * @tee_ctx: TEE context used for communication
+ * @caps: Supported channel capabilities
+ * @mu: Mutex for protection of @channel_list
+ * @channel_list: List of all created channels for the agent
+ */
+struct scmi_optee_agent {
+	struct device *dev;
+	struct tee_context *tee_ctx;
+	u32 caps;
+	struct mutex mu;
+	struct list_head channel_list;
+};
+
+/* There can be only 1 SCMI service in OP-TEE we connect to */
+static struct scmi_optee_agent *scmi_optee_private;
+
+/* Forward reference to scmi_optee transport initialization */
+static int scmi_optee_init(void);
+
+/* Open a session toward SCMI OP-TEE service with REE_KERNEL identity */
+static int open_session(struct scmi_optee_agent *agent, u32 *tee_session)
+{
+	struct device *dev = agent->dev;
+	struct tee_client_device *scmi_pta = to_tee_client_device(dev);
+	struct tee_ioctl_open_session_arg arg = { };
+	int ret;
+
+	memcpy(arg.uuid, scmi_pta->id.uuid.b, TEE_IOCTL_UUID_LEN);
+	arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL;
+
+	ret = tee_client_open_session(agent->tee_ctx, &arg, NULL);
+	if (ret < 0 || arg.ret) {
+		dev_err(dev, "Can't open tee session: %d / %#x\n", ret, arg.ret);
+		return -EOPNOTSUPP;
+	}
+
+	*tee_session = arg.session;
+
+	return 0;
+}
+
+static void close_session(struct scmi_optee_agent *agent, u32 tee_session)
+{
+	tee_client_close_session(agent->tee_ctx, tee_session);
+}
+
+static int get_capabilities(struct scmi_optee_agent *agent)
+{
+	struct tee_ioctl_invoke_arg arg = { };
+	struct tee_param param[1] = { };
+	u32 caps;
+	u32 tee_session;
+	int ret;
+
+	ret = open_session(agent, &tee_session);
+	if (ret)
+		return ret;
+
+	arg.func = PTA_SCMI_CMD_CAPABILITIES;
+	arg.session = tee_session;
+	arg.num_params = 1;
+
+	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
+
+	ret = tee_client_invoke_func(agent->tee_ctx, &arg, param);
+
+	close_session(agent, tee_session);
+
+	if (ret < 0 || arg.ret) {
+		dev_err(agent->dev, "Can't get capabilities: %d / %#x\n", ret, arg.ret);
+		return -EOPNOTSUPP;
+	}
+
+	caps = param[0].u.value.a;
+
+	if (!(caps & (PTA_SCMI_CAPS_SMT_HEADER | PTA_SCMI_CAPS_MSG_HEADER))) {
+		dev_err(agent->dev, "OP-TEE SCMI PTA doesn't support SMT and MSG\n");
+		return -EOPNOTSUPP;
+	}
+
+	agent->caps = caps;
+
+	return 0;
+}
+
+static int get_channel(struct scmi_optee_channel *channel)
+{
+	struct device *dev = scmi_optee_private->dev;
+	struct tee_ioctl_invoke_arg arg = { };
+	struct tee_param param[1] = { };
+	unsigned int caps = 0;
+	int ret;
+
+	if (channel->tee_shm)
+		caps = PTA_SCMI_CAPS_MSG_HEADER;
+	else
+		caps = PTA_SCMI_CAPS_SMT_HEADER;
+
+	arg.func = PTA_SCMI_CMD_GET_CHANNEL;
+	arg.session = channel->tee_session;
+	arg.num_params = 1;
+
+	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT;
+	param[0].u.value.a = channel->channel_id;
+	param[0].u.value.b = caps;
+
+	ret = tee_client_invoke_func(scmi_optee_private->tee_ctx, &arg, param);
+
+	if (ret || arg.ret) {
+		dev_err(dev, "Can't get channel with caps %#x: %d / %#x\n", caps, ret, arg.ret);
+		return -EOPNOTSUPP;
+	}
+
+	/* From now on use channel identifer provided by OP-TEE SCMI service */
+	channel->channel_id = param[0].u.value.a;
+	channel->caps = caps;
+
+	return 0;
+}
+
+static int invoke_process_smt_channel(struct scmi_optee_channel *channel)
+{
+	struct tee_ioctl_invoke_arg arg = {
+		.func = PTA_SCMI_CMD_PROCESS_SMT_CHANNEL,
+		.session = channel->tee_session,
+		.num_params = 1,
+	};
+	struct tee_param param[1] = { };
+	int ret;
+
+	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
+	param[0].u.value.a = channel->channel_id;
+
+	ret = tee_client_invoke_func(scmi_optee_private->tee_ctx, &arg, param);
+	if (ret < 0 || arg.ret) {
+		dev_err(scmi_optee_private->dev, "Can't invoke channel %u: %d / %#x\n",
+			channel->channel_id, ret, arg.ret);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int invoke_process_msg_channel(struct scmi_optee_channel *channel, size_t msg_size)
+{
+	struct tee_ioctl_invoke_arg arg = {
+		.func = PTA_SCMI_CMD_PROCESS_MSG_CHANNEL,
+		.session = channel->tee_session,
+		.num_params = 3,
+	};
+	struct tee_param param[3] = { };
+	int ret;
+
+	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
+	param[0].u.value.a = channel->channel_id;
+
+	param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT;
+	param[1].u.memref.shm = channel->tee_shm;
+	param[1].u.memref.size = msg_size;
+
+	param[2].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT;
+	param[2].u.memref.shm = channel->tee_shm;
+	param[2].u.memref.size = SCMI_OPTEE_MAX_MSG_SIZE;
+
+	ret = tee_client_invoke_func(scmi_optee_private->tee_ctx, &arg, param);
+	if (ret < 0 || arg.ret) {
+		dev_err(scmi_optee_private->dev, "Can't invoke channel %u: %d / %#x\n",
+			channel->channel_id, ret, arg.ret);
+		return -EIO;
+	}
+
+	/* Save response size */
+	channel->rx_len = param[2].u.memref.size;
+
+	return 0;
+}
+
+static int scmi_optee_link_supplier(struct device *dev)
+{
+	if (!scmi_optee_private) {
+		if (scmi_optee_init())
+			dev_dbg(dev, "Optee bus not yet ready\n");
+
+		/* Wait for optee bus */
+		return -EPROBE_DEFER;
+	}
+
+	if (!device_link_add(dev, scmi_optee_private->dev, DL_FLAG_AUTOREMOVE_CONSUMER)) {
+		dev_err(dev, "Adding link to supplier optee device failed\n");
+		return -ECANCELED;
+	}
+
+	return 0;
+}
+
+static bool scmi_optee_chan_available(struct device *dev, int idx)
+{
+	u32 channel_id;
+
+	return !of_property_read_u32_index(dev->of_node, "linaro,optee-channel-id",
+					   idx, &channel_id);
+}
+
+static void scmi_optee_clear_channel(struct scmi_chan_info *cinfo)
+{
+	struct scmi_optee_channel *channel = cinfo->transport_info;
+
+	if (!channel->tee_shm)
+		shmem_clear_channel(channel->req.shmem);
+}
+
+static int setup_dynamic_shmem(struct device *dev, struct scmi_optee_channel *channel)
+{
+	const size_t msg_size = SCMI_OPTEE_MAX_MSG_SIZE;
+	void *shbuf;
+
+	channel->tee_shm = tee_shm_alloc_kernel_buf(scmi_optee_private->tee_ctx, msg_size);
+	if (IS_ERR(channel->tee_shm)) {
+		dev_err(channel->cinfo->dev, "shmem allocation failed\n");
+		return -ENOMEM;
+	}
+
+	shbuf = tee_shm_get_va(channel->tee_shm, 0);
+	memset(shbuf, 0, msg_size);
+	channel->req.msg = shbuf;
+	channel->rx_len = msg_size;
+
+	return 0;
+}
+
+static int setup_static_shmem(struct device *dev, struct scmi_chan_info *cinfo,
+			      struct scmi_optee_channel *channel)
+{
+	struct device_node *np;
+	resource_size_t size;
+	struct resource res;
+	int ret;
+
+	np = of_parse_phandle(cinfo->dev->of_node, "shmem", 0);
+	if (!of_device_is_compatible(np, "arm,scmi-shmem")) {
+		ret = -ENXIO;
+		goto out;
+	}
+
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret) {
+		dev_err(dev, "Failed to get SCMI Tx shared memory\n");
+		goto out;
+	}
+
+	size = resource_size(&res);
+
+	channel->req.shmem = devm_ioremap(dev, res.start, size);
+	if (!channel->req.shmem) {
+		dev_err(dev, "Failed to ioremap SCMI Tx shared memory\n");
+		ret = -EADDRNOTAVAIL;
+		goto out;
+	}
+
+	ret = 0;
+
+out:
+	of_node_put(np);
+
+	return ret;
+}
+
+static int setup_shmem(struct device *dev, struct scmi_chan_info *cinfo,
+		       struct scmi_optee_channel *channel)
+{
+	if (of_find_property(cinfo->dev->of_node, "shmem", NULL))
+		return setup_static_shmem(dev, cinfo, channel);
+	else
+		return setup_dynamic_shmem(dev, channel);
+}
+
+static int scmi_optee_chan_setup(struct scmi_chan_info *cinfo, struct device *dev, bool tx)
+{
+	struct scmi_optee_channel *channel;
+	uint32_t channel_id;
+	int ret;
+
+	if (!tx)
+		return -ENODEV;
+
+	channel = devm_kzalloc(dev, sizeof(*channel), GFP_KERNEL);
+	if (!channel)
+		return -ENOMEM;
+
+	ret = of_property_read_u32_index(cinfo->dev->of_node, "linaro,optee-channel-id",
+					 0, &channel_id);
+	if (ret)
+		return ret;
+
+	cinfo->transport_info = channel;
+	channel->cinfo = cinfo;
+	channel->channel_id = channel_id;
+	mutex_init(&channel->mu);
+
+	ret = setup_shmem(dev, cinfo, channel);
+	if (ret)
+		return ret;
+
+	ret = open_session(scmi_optee_private, &channel->tee_session);
+	if (ret)
+		goto err_free_shm;
+
+	ret = get_channel(channel);
+	if (ret)
+		goto err_close_sess;
+
+	/* Enable polling */
+	cinfo->no_completion_irq = true;
+
+	mutex_lock(&scmi_optee_private->mu);
+	list_add(&channel->link, &scmi_optee_private->channel_list);
+	mutex_unlock(&scmi_optee_private->mu);
+
+	return 0;
+
+err_close_sess:
+	close_session(scmi_optee_private, channel->tee_session);
+err_free_shm:
+	if (channel->tee_shm)
+		tee_shm_free(channel->tee_shm);
+
+	return ret;
+}
+
+static int scmi_optee_chan_free(int id, void *p, void *data)
+{
+	struct scmi_chan_info *cinfo = p;
+	struct scmi_optee_channel *channel = cinfo->transport_info;
+
+	mutex_lock(&scmi_optee_private->mu);
+	list_del(&channel->link);
+	mutex_unlock(&scmi_optee_private->mu);
+
+	close_session(scmi_optee_private, channel->tee_session);
+
+	if (channel->tee_shm) {
+		tee_shm_free(channel->tee_shm);
+		channel->tee_shm = NULL;
+	}
+
+	cinfo->transport_info = NULL;
+	channel->cinfo = NULL;
+
+	scmi_free_channel(cinfo, data, id);
+
+	return 0;
+}
+
+static int scmi_optee_send_message(struct scmi_chan_info *cinfo,
+				   struct scmi_xfer *xfer)
+{
+	struct scmi_optee_channel *channel = cinfo->transport_info;
+	int ret;
+
+	mutex_lock(&channel->mu);
+
+	if (channel->tee_shm) {
+		msg_tx_prepare(channel->req.msg, xfer);
+		ret = invoke_process_msg_channel(channel, msg_command_size(xfer));
+	} else {
+		shmem_tx_prepare(channel->req.shmem, xfer, cinfo);
+		ret = invoke_process_smt_channel(channel);
+	}
+
+	if (ret)
+		mutex_unlock(&channel->mu);
+
+	return ret;
+}
+
+static void scmi_optee_fetch_response(struct scmi_chan_info *cinfo,
+				      struct scmi_xfer *xfer)
+{
+	struct scmi_optee_channel *channel = cinfo->transport_info;
+
+	if (channel->tee_shm)
+		msg_fetch_response(channel->req.msg, channel->rx_len, xfer);
+	else
+		shmem_fetch_response(channel->req.shmem, xfer);
+}
+
+static void scmi_optee_mark_txdone(struct scmi_chan_info *cinfo, int ret,
+				   struct scmi_xfer *__unused)
+{
+	struct scmi_optee_channel *channel = cinfo->transport_info;
+
+	mutex_unlock(&channel->mu);
+}
+
+static struct scmi_transport_ops scmi_optee_ops = {
+	.link_supplier = scmi_optee_link_supplier,
+	.chan_available = scmi_optee_chan_available,
+	.chan_setup = scmi_optee_chan_setup,
+	.chan_free = scmi_optee_chan_free,
+	.send_message = scmi_optee_send_message,
+	.mark_txdone = scmi_optee_mark_txdone,
+	.fetch_response = scmi_optee_fetch_response,
+	.clear_channel = scmi_optee_clear_channel,
+};
+
+static int scmi_optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
+{
+	return ver->impl_id == TEE_IMPL_ID_OPTEE;
+}
+
+static int scmi_optee_service_probe(struct device *dev)
+{
+	struct scmi_optee_agent *agent;
+	struct tee_context *tee_ctx;
+	int ret;
+
+	/* Only one SCMI OP-TEE device allowed */
+	if (scmi_optee_private) {
+		dev_err(dev, "An SCMI OP-TEE device was already initialized: only one allowed\n");
+		return -EBUSY;
+	}
+
+	tee_ctx = tee_client_open_context(NULL, scmi_optee_ctx_match, NULL, NULL);
+	if (IS_ERR(tee_ctx))
+		return -ENODEV;
+
+	agent = devm_kzalloc(dev, sizeof(*agent), GFP_KERNEL);
+	if (!agent) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	agent->dev = dev;
+	agent->tee_ctx = tee_ctx;
+	INIT_LIST_HEAD(&agent->channel_list);
+	mutex_init(&agent->mu);
+
+	ret = get_capabilities(agent);
+	if (ret)
+		goto err;
+
+	/* Ensure agent resources are all visible before scmi_optee_private is */
+	smp_mb();
+	scmi_optee_private = agent;
+
+	return 0;
+
+err:
+	tee_client_close_context(tee_ctx);
+
+	return ret;
+}
+
+static int scmi_optee_service_remove(struct device *dev)
+{
+	struct scmi_optee_agent *agent = scmi_optee_private;
+
+	if (!scmi_optee_private)
+		return -EINVAL;
+
+	if (!list_empty(&scmi_optee_private->channel_list))
+		return -EBUSY;
+
+	/* Ensure cleared reference is visible before resources are released */
+	smp_store_mb(scmi_optee_private, NULL);
+
+	tee_client_close_context(agent->tee_ctx);
+
+	return 0;
+}
+
+static const struct tee_client_device_id scmi_optee_service_id[] = {
+	{
+		UUID_INIT(0xa8cfe406, 0xd4f5, 0x4a2e,
+			  0x9f, 0x8d, 0xa2, 0x5d, 0xc7, 0x54, 0xc0, 0x99)
+	},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(tee, scmi_optee_service_id);
+
+static struct tee_client_driver scmi_optee_driver = {
+	.id_table	= scmi_optee_service_id,
+	.driver		= {
+		.name = "scmi-optee",
+		.bus = &tee_bus_type,
+		.probe = scmi_optee_service_probe,
+		.remove = scmi_optee_service_remove,
+	},
+};
+
+static int scmi_optee_init(void)
+{
+	return driver_register(&scmi_optee_driver.driver);
+}
+
+static void scmi_optee_exit(void)
+{
+	if (scmi_optee_private)
+		driver_unregister(&scmi_optee_driver.driver);
+}
+
+const struct scmi_desc scmi_optee_desc = {
+	.transport_exit = scmi_optee_exit,
+	.ops = &scmi_optee_ops,
+	.max_rx_timeout_ms = 30,
+	.max_msg = 20,
+	.max_msg_size = SCMI_OPTEE_MAX_MSG_SIZE,
+	.sync_cmds_completed_on_ret = true,
+};