Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

5 files changed, 1306 insertions, 0 deletions

diff --git a/drivers/firmware/broadcom/Kconfig b/drivers/firmware/broadcom/Kconfig
new file mode 100644
index 000000000..8e3d355a6
--- /dev/null
+++ b/drivers/firmware/broadcom/Kconfig
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config BCM47XX_NVRAM
+	bool "Broadcom NVRAM driver"
+	depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
+	help
+	  Broadcom home routers contain flash partition called "nvram" with all
+	  important hardware configuration as well as some minor user setup.
+	  NVRAM partition contains a text-like data representing name=value
+	  pairs.
+	  This driver provides an easy way to get value of requested parameter.
+	  It simply reads content of NVRAM and parses it. It doesn't control any
+	  hardware part itself.
+
+config BCM47XX_SPROM
+	bool "Broadcom SPROM driver"
+	depends on BCM47XX_NVRAM
+	select GENERIC_NET_UTILS
+	help
+	  Broadcom devices store configuration data in SPROM. Accessing it is
+	  specific to the bus host type, e.g. PCI(e) devices have it mapped in
+	  a PCI BAR.
+	  In case of SoC devices SPROM content is stored on a flash used by
+	  bootloader firmware CFE. This driver provides method to ssb and bcma
+	  drivers to read SPROM on SoC.
+
+config TEE_BNXT_FW
+	tristate "Broadcom BNXT firmware manager"
+	depends on (ARCH_BCM_IPROC && OPTEE) || (COMPILE_TEST && TEE)
+	default ARCH_BCM_IPROC
+	help
+	  This module help to manage firmware on Broadcom BNXT device. The module
+	  registers on tee bus and invoke calls to manage firmware on BNXT device.
diff --git a/drivers/firmware/broadcom/Makefile b/drivers/firmware/broadcom/Makefile
new file mode 100644
index 000000000..17c5061c4
--- /dev/null
+++ b/drivers/firmware/broadcom/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_BCM47XX_NVRAM)		+= bcm47xx_nvram.o
+obj-$(CONFIG_BCM47XX_SPROM)		+= bcm47xx_sprom.o
+obj-$(CONFIG_TEE_BNXT_FW)		+= tee_bnxt_fw.o
diff --git a/drivers/firmware/broadcom/bcm47xx_nvram.c b/drivers/firmware/broadcom/bcm47xx_nvram.c
new file mode 100644
index 000000000..5f47dbf48
--- /dev/null
+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * BCM947xx nvram variable access
+ *
+ * Copyright (C) 2005 Broadcom Corporation
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ */
+
+#include <linux/io.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mtd/mtd.h>
+#include <linux/bcm47xx_nvram.h>
+
+#define NVRAM_MAGIC			0x48534C46	/* 'FLSH' */
+#define NVRAM_SPACE			0x10000
+#define NVRAM_MAX_GPIO_ENTRIES		32
+#define NVRAM_MAX_GPIO_VALUE_LEN	30
+
+#define FLASH_MIN		0x00020000	/* Minimum flash size */
+
+struct nvram_header {
+	u32 magic;
+	u32 len;
+	u32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:31 sdram_init */
+	u32 config_refresh;	/* 0:15 sdram_config, 16:31 sdram_refresh */
+	u32 config_ncdl;	/* ncdl values for memc */
+};
+
+static char nvram_buf[NVRAM_SPACE];
+static size_t nvram_len;
+static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
+
+/**
+ * bcm47xx_nvram_is_valid - check for a valid NVRAM at specified memory
+ */
+static bool bcm47xx_nvram_is_valid(void __iomem *nvram)
+{
+	return ((struct nvram_header *)nvram)->magic == NVRAM_MAGIC;
+}
+
+/**
+ * bcm47xx_nvram_copy - copy NVRAM to internal buffer
+ */
+static void bcm47xx_nvram_copy(void __iomem *nvram_start, size_t res_size)
+{
+	struct nvram_header __iomem *header = nvram_start;
+	size_t copy_size;
+
+	copy_size = header->len;
+	if (copy_size > res_size) {
+		pr_err("The nvram size according to the header seems to be bigger than the partition on flash\n");
+		copy_size = res_size;
+	}
+	if (copy_size >= NVRAM_SPACE) {
+		pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
+		       copy_size, NVRAM_SPACE - 1);
+		copy_size = NVRAM_SPACE - 1;
+	}
+
+	__ioread32_copy(nvram_buf, nvram_start, DIV_ROUND_UP(copy_size, 4));
+	nvram_buf[NVRAM_SPACE - 1] = '\0';
+	nvram_len = copy_size;
+}
+
+/**
+ * bcm47xx_nvram_find_and_copy - find NVRAM on flash mapping & copy it
+ */
+static int bcm47xx_nvram_find_and_copy(void __iomem *flash_start, size_t res_size)
+{
+	size_t flash_size;
+	size_t offset;
+	int i;
+
+	if (nvram_len) {
+		pr_warn("nvram already initialized\n");
+		return -EEXIST;
+	}
+
+	/* TODO: when nvram is on nand flash check for bad blocks first. */
+
+	/* Try every possible flash size and check for NVRAM at its end */
+	for (flash_size = FLASH_MIN; flash_size <= res_size; flash_size <<= 1) {
+		for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) {
+			offset = flash_size - nvram_sizes[i];
+			if (bcm47xx_nvram_is_valid(flash_start + offset))
+				goto found;
+		}
+	}
+
+	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
+
+	offset = 4096;
+	if (bcm47xx_nvram_is_valid(flash_start + offset))
+		goto found;
+
+	offset = 1024;
+	if (bcm47xx_nvram_is_valid(flash_start + offset))
+		goto found;
+
+	pr_err("no nvram found\n");
+	return -ENXIO;
+
+found:
+	bcm47xx_nvram_copy(flash_start + offset, res_size - offset);
+
+	return 0;
+}
+
+int bcm47xx_nvram_init_from_iomem(void __iomem *nvram_start, size_t res_size)
+{
+	if (nvram_len) {
+		pr_warn("nvram already initialized\n");
+		return -EEXIST;
+	}
+
+	if (!bcm47xx_nvram_is_valid(nvram_start)) {
+		pr_err("No valid NVRAM found\n");
+		return -ENOENT;
+	}
+
+	bcm47xx_nvram_copy(nvram_start, res_size);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bcm47xx_nvram_init_from_iomem);
+
+/*
+ * On bcm47xx we need access to the NVRAM very early, so we can't use mtd
+ * subsystem to access flash. We can't even use platform device / driver to
+ * store memory offset.
+ * To handle this we provide following symbol. It's supposed to be called as
+ * soon as we get info about flash device, before any NVRAM entry is needed.
+ */
+int bcm47xx_nvram_init_from_mem(u32 base, u32 lim)
+{
+	void __iomem *iobase;
+	int err;
+
+	iobase = ioremap(base, lim);
+	if (!iobase)
+		return -ENOMEM;
+
+	err = bcm47xx_nvram_find_and_copy(iobase, lim);
+
+	iounmap(iobase);
+
+	return err;
+}
+
+static int nvram_init(void)
+{
+#ifdef CONFIG_MTD
+	struct mtd_info *mtd;
+	struct nvram_header header;
+	size_t bytes_read;
+	int err;
+
+	mtd = get_mtd_device_nm("nvram");
+	if (IS_ERR(mtd))
+		return -ENODEV;
+
+	err = mtd_read(mtd, 0, sizeof(header), &bytes_read, (uint8_t *)&header);
+	if (!err && header.magic == NVRAM_MAGIC &&
+	    header.len > sizeof(header)) {
+		nvram_len = header.len;
+		if (nvram_len >= NVRAM_SPACE) {
+			pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
+				nvram_len, NVRAM_SPACE);
+			nvram_len = NVRAM_SPACE - 1;
+		}
+
+		err = mtd_read(mtd, 0, nvram_len, &nvram_len,
+			       (u8 *)nvram_buf);
+		return err;
+	}
+#endif
+
+	return -ENXIO;
+}
+
+int bcm47xx_nvram_getenv(const char *name, char *val, size_t val_len)
+{
+	char *var, *value, *end, *eq;
+	int err;
+
+	if (!name)
+		return -EINVAL;
+
+	if (!nvram_len) {
+		err = nvram_init();
+		if (err)
+			return err;
+	}
+
+	/* Look for name=value and return value */
+	var = &nvram_buf[sizeof(struct nvram_header)];
+	end = nvram_buf + sizeof(nvram_buf);
+	while (var < end && *var) {
+		eq = strchr(var, '=');
+		if (!eq)
+			break;
+		value = eq + 1;
+		if (eq - var == strlen(name) &&
+		    strncmp(var, name, eq - var) == 0)
+			return snprintf(val, val_len, "%s", value);
+		var = value + strlen(value) + 1;
+	}
+	return -ENOENT;
+}
+EXPORT_SYMBOL(bcm47xx_nvram_getenv);
+
+int bcm47xx_nvram_gpio_pin(const char *name)
+{
+	int i, err;
+	char nvram_var[] = "gpioXX";
+	char buf[NVRAM_MAX_GPIO_VALUE_LEN];
+
+	/* TODO: Optimize it to don't call getenv so many times */
+	for (i = 0; i < NVRAM_MAX_GPIO_ENTRIES; i++) {
+		err = snprintf(nvram_var, sizeof(nvram_var), "gpio%i", i);
+		if (err <= 0)
+			continue;
+		err = bcm47xx_nvram_getenv(nvram_var, buf, sizeof(buf));
+		if (err <= 0)
+			continue;
+		if (!strcmp(name, buf))
+			return i;
+	}
+	return -ENOENT;
+}
+EXPORT_SYMBOL(bcm47xx_nvram_gpio_pin);
+
+char *bcm47xx_nvram_get_contents(size_t *nvram_size)
+{
+	int err;
+	char *nvram;
+
+	if (!nvram_len) {
+		err = nvram_init();
+		if (err)
+			return NULL;
+	}
+
+	*nvram_size = nvram_len - sizeof(struct nvram_header);
+	nvram = vmalloc(*nvram_size);
+	if (!nvram)
+		return NULL;
+	memcpy(nvram, &nvram_buf[sizeof(struct nvram_header)], *nvram_size);
+
+	return nvram;
+}
+EXPORT_SYMBOL(bcm47xx_nvram_get_contents);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/broadcom/bcm47xx_sprom.c b/drivers/firmware/broadcom/bcm47xx_sprom.c
new file mode 100644
index 000000000..14fbcd116
--- /dev/null
+++ b/drivers/firmware/broadcom/bcm47xx_sprom.c
@@ -0,0 +1,726 @@
+/*
+ *  Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
+ *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *  Copyright (C) 2006 Michael Buesch <m@bues.ch>
+ *  Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org>
+ *  Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/bcm47xx_nvram.h>
+#include <linux/bcm47xx_sprom.h>
+#include <linux/bcma/bcma.h>
+#include <linux/etherdevice.h>
+#include <linux/if_ether.h>
+#include <linux/ssb/ssb.h>
+
+static void create_key(const char *prefix, const char *postfix,
+		       const char *name, char *buf, int len)
+{
+	if (prefix && postfix)
+		snprintf(buf, len, "%s%s%s", prefix, name, postfix);
+	else if (prefix)
+		snprintf(buf, len, "%s%s", prefix, name);
+	else if (postfix)
+		snprintf(buf, len, "%s%s", name, postfix);
+	else
+		snprintf(buf, len, "%s", name);
+}
+
+static int get_nvram_var(const char *prefix, const char *postfix,
+			 const char *name, char *buf, int len, bool fallback)
+{
+	char key[40];
+	int err;
+
+	create_key(prefix, postfix, name, key, sizeof(key));
+
+	err = bcm47xx_nvram_getenv(key, buf, len);
+	if (fallback && err == -ENOENT && prefix) {
+		create_key(NULL, postfix, name, key, sizeof(key));
+		err = bcm47xx_nvram_getenv(key, buf, len);
+	}
+	return err;
+}
+
+#define NVRAM_READ_VAL(type)						\
+static void nvram_read_ ## type(const char *prefix,			\
+				const char *postfix, const char *name,	\
+				type *val, type allset, bool fallback)	\
+{									\
+	char buf[100];							\
+	int err;							\
+	type var;							\
+									\
+	err = get_nvram_var(prefix, postfix, name, buf, sizeof(buf),	\
+			    fallback);					\
+	if (err < 0)							\
+		return;							\
+	err = kstrto ## type(strim(buf), 0, &var);			\
+	if (err) {							\
+		pr_warn("can not parse nvram name %s%s%s with value %s got %i\n",	\
+			prefix, name, postfix, buf, err);		\
+		return;							\
+	}								\
+	if (allset && var == allset)					\
+		return;							\
+	*val = var;							\
+}
+
+NVRAM_READ_VAL(u8)
+NVRAM_READ_VAL(s8)
+NVRAM_READ_VAL(u16)
+NVRAM_READ_VAL(u32)
+
+#undef NVRAM_READ_VAL
+
+static void nvram_read_u32_2(const char *prefix, const char *name,
+			     u16 *val_lo, u16 *val_hi, bool fallback)
+{
+	char buf[100];
+	int err;
+	u32 val;
+
+	err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback);
+	if (err < 0)
+		return;
+	err = kstrtou32(strim(buf), 0, &val);
+	if (err) {
+		pr_warn("can not parse nvram name %s%s with value %s got %i\n",
+			prefix, name, buf, err);
+		return;
+	}
+	*val_lo = (val & 0x0000FFFFU);
+	*val_hi = (val & 0xFFFF0000U) >> 16;
+}
+
+static void nvram_read_leddc(const char *prefix, const char *name,
+			     u8 *leddc_on_time, u8 *leddc_off_time,
+			     bool fallback)
+{
+	char buf[100];
+	int err;
+	u32 val;
+
+	err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback);
+	if (err < 0)
+		return;
+	err = kstrtou32(strim(buf), 0, &val);
+	if (err) {
+		pr_warn("can not parse nvram name %s%s with value %s got %i\n",
+			prefix, name, buf, err);
+		return;
+	}
+
+	if (val == 0xffff || val == 0xffffffff)
+		return;
+
+	*leddc_on_time = val & 0xff;
+	*leddc_off_time = (val >> 16) & 0xff;
+}
+
+static void nvram_read_macaddr(const char *prefix, const char *name,
+			       u8 val[6], bool fallback)
+{
+	char buf[100];
+	int err;
+
+	err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback);
+	if (err < 0)
+		return;
+
+	strreplace(buf, '-', ':');
+	if (!mac_pton(buf, val))
+		pr_warn("Can not parse mac address: %s\n", buf);
+}
+
+static void nvram_read_alpha2(const char *prefix, const char *name,
+			     char val[2], bool fallback)
+{
+	char buf[10];
+	int err;
+
+	err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback);
+	if (err < 0)
+		return;
+	if (buf[0] == '0')
+		return;
+	if (strlen(buf) > 2) {
+		pr_warn("alpha2 is too long %s\n", buf);
+		return;
+	}
+	memcpy(val, buf, 2);
+}
+
+/* This is one-function-only macro, it uses local "sprom" variable! */
+#define ENTRY(_revmask, _type, _prefix, _name, _val, _allset, _fallback) \
+	if (_revmask & BIT(sprom->revision)) \
+		nvram_read_ ## _type(_prefix, NULL, _name, &sprom->_val, \
+				     _allset, _fallback)
+/*
+ * Special version of filling function that can be safely called for any SPROM
+ * revision. For every NVRAM to SPROM mapping it contains bitmask of revisions
+ * for which the mapping is valid.
+ * It obviously requires some hexadecimal/bitmasks knowledge, but allows
+ * writing cleaner code (easy revisions handling).
+ * Note that while SPROM revision 0 was never used, we still keep BIT(0)
+ * reserved for it, just to keep numbering sane.
+ */
+static void bcm47xx_sprom_fill_auto(struct ssb_sprom *sprom,
+				    const char *prefix, bool fallback)
+{
+	const char *pre = prefix;
+	bool fb = fallback;
+
+	/* Broadcom extracts it for rev 8+ but it was found on 2 and 4 too */
+	ENTRY(0xfffffffe, u16, pre, "devid", dev_id, 0, fallback);
+
+	ENTRY(0xfffffffe, u16, pre, "boardrev", board_rev, 0, true);
+	ENTRY(0xfffffffe, u32, pre, "boardflags", boardflags, 0, fb);
+	ENTRY(0xfffffff0, u32, pre, "boardflags2", boardflags2, 0, fb);
+	ENTRY(0xfffff800, u32, pre, "boardflags3", boardflags3, 0, fb);
+	ENTRY(0x00000002, u16, pre, "boardflags", boardflags_lo, 0, fb);
+	ENTRY(0xfffffffc, u16, pre, "boardtype", board_type, 0, true);
+	ENTRY(0xfffffffe, u16, pre, "boardnum", board_num, 0, fb);
+	ENTRY(0x00000002, u8, pre, "cc", country_code, 0, fb);
+	ENTRY(0xfffffff8, u8, pre, "regrev", regrev, 0, fb);
+
+	ENTRY(0xfffffffe, u8, pre, "ledbh0", gpio0, 0xff, fb);
+	ENTRY(0xfffffffe, u8, pre, "ledbh1", gpio1, 0xff, fb);
+	ENTRY(0xfffffffe, u8, pre, "ledbh2", gpio2, 0xff, fb);
+	ENTRY(0xfffffffe, u8, pre, "ledbh3", gpio3, 0xff, fb);
+
+	ENTRY(0x0000070e, u16, pre, "pa0b0", pa0b0, 0, fb);
+	ENTRY(0x0000070e, u16, pre, "pa0b1", pa0b1, 0, fb);
+	ENTRY(0x0000070e, u16, pre, "pa0b2", pa0b2, 0, fb);
+	ENTRY(0x0000070e, u8, pre, "pa0itssit", itssi_bg, 0, fb);
+	ENTRY(0x0000070e, u8, pre, "pa0maxpwr", maxpwr_bg, 0, fb);
+
+	ENTRY(0x0000070c, u8, pre, "opo", opo, 0, fb);
+	ENTRY(0xfffffffe, u8, pre, "aa2g", ant_available_bg, 0, fb);
+	ENTRY(0xfffffffe, u8, pre, "aa5g", ant_available_a, 0, fb);
+	ENTRY(0x000007fe, s8, pre, "ag0", antenna_gain.a0, 0, fb);
+	ENTRY(0x000007fe, s8, pre, "ag1", antenna_gain.a1, 0, fb);
+	ENTRY(0x000007f0, s8, pre, "ag2", antenna_gain.a2, 0, fb);
+	ENTRY(0x000007f0, s8, pre, "ag3", antenna_gain.a3, 0, fb);
+
+	ENTRY(0x0000070e, u16, pre, "pa1b0", pa1b0, 0, fb);
+	ENTRY(0x0000070e, u16, pre, "pa1b1", pa1b1, 0, fb);
+	ENTRY(0x0000070e, u16, pre, "pa1b2", pa1b2, 0, fb);
+	ENTRY(0x0000070c, u16, pre, "pa1lob0", pa1lob0, 0, fb);
+	ENTRY(0x0000070c, u16, pre, "pa1lob1", pa1lob1, 0, fb);
+	ENTRY(0x0000070c, u16, pre, "pa1lob2", pa1lob2, 0, fb);
+	ENTRY(0x0000070c, u16, pre, "pa1hib0", pa1hib0, 0, fb);
+	ENTRY(0x0000070c, u16, pre, "pa1hib1", pa1hib1, 0, fb);
+	ENTRY(0x0000070c, u16, pre, "pa1hib2", pa1hib2, 0, fb);
+	ENTRY(0x0000070e, u8, pre, "pa1itssit", itssi_a, 0, fb);
+	ENTRY(0x0000070e, u8, pre, "pa1maxpwr", maxpwr_a, 0, fb);
+	ENTRY(0x0000070c, u8, pre, "pa1lomaxpwr", maxpwr_al, 0, fb);
+	ENTRY(0x0000070c, u8, pre, "pa1himaxpwr", maxpwr_ah, 0, fb);
+
+	ENTRY(0x00000708, u8, pre, "bxa2g", bxa2g, 0, fb);
+	ENTRY(0x00000708, u8, pre, "rssisav2g", rssisav2g, 0, fb);
+	ENTRY(0x00000708, u8, pre, "rssismc2g", rssismc2g, 0, fb);
+	ENTRY(0x00000708, u8, pre, "rssismf2g", rssismf2g, 0, fb);
+	ENTRY(0x00000708, u8, pre, "bxa5g", bxa5g, 0, fb);
+	ENTRY(0x00000708, u8, pre, "rssisav5g", rssisav5g, 0, fb);
+	ENTRY(0x00000708, u8, pre, "rssismc5g", rssismc5g, 0, fb);
+	ENTRY(0x00000708, u8, pre, "rssismf5g", rssismf5g, 0, fb);
+	ENTRY(0x00000708, u8, pre, "tri2g", tri2g, 0, fb);
+	ENTRY(0x00000708, u8, pre, "tri5g", tri5g, 0, fb);
+	ENTRY(0x00000708, u8, pre, "tri5gl", tri5gl, 0, fb);
+	ENTRY(0x00000708, u8, pre, "tri5gh", tri5gh, 0, fb);
+	ENTRY(0x00000708, s8, pre, "rxpo2g", rxpo2g, 0, fb);
+	ENTRY(0x00000708, s8, pre, "rxpo5g", rxpo5g, 0, fb);
+	ENTRY(0xfffffff0, u8, pre, "txchain", txchain, 0xf, fb);
+	ENTRY(0xfffffff0, u8, pre, "rxchain", rxchain, 0xf, fb);
+	ENTRY(0xfffffff0, u8, pre, "antswitch", antswitch, 0xff, fb);
+	ENTRY(0x00000700, u8, pre, "tssipos2g", fem.ghz2.tssipos, 0, fb);
+	ENTRY(0x00000700, u8, pre, "extpagain2g", fem.ghz2.extpa_gain, 0, fb);
+	ENTRY(0x00000700, u8, pre, "pdetrange2g", fem.ghz2.pdet_range, 0, fb);
+	ENTRY(0x00000700, u8, pre, "triso2g", fem.ghz2.tr_iso, 0, fb);
+	ENTRY(0x00000700, u8, pre, "antswctl2g", fem.ghz2.antswlut, 0, fb);
+	ENTRY(0x00000700, u8, pre, "tssipos5g", fem.ghz5.tssipos, 0, fb);
+	ENTRY(0x00000700, u8, pre, "extpagain5g", fem.ghz5.extpa_gain, 0, fb);
+	ENTRY(0x00000700, u8, pre, "pdetrange5g", fem.ghz5.pdet_range, 0, fb);
+	ENTRY(0x00000700, u8, pre, "triso5g", fem.ghz5.tr_iso, 0, fb);
+	ENTRY(0x00000700, u8, pre, "antswctl5g", fem.ghz5.antswlut, 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid2ga0", txpid2g[0], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid2ga1", txpid2g[1], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid2ga2", txpid2g[2], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid2ga3", txpid2g[3], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5ga0", txpid5g[0], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5ga1", txpid5g[1], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5ga2", txpid5g[2], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5ga3", txpid5g[3], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5gla0", txpid5gl[0], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5gla1", txpid5gl[1], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5gla2", txpid5gl[2], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5gla3", txpid5gl[3], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5gha0", txpid5gh[0], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5gha1", txpid5gh[1], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5gha2", txpid5gh[2], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5gha3", txpid5gh[3], 0, fb);
+
+	ENTRY(0xffffff00, u8, pre, "tempthresh", tempthresh, 0, fb);
+	ENTRY(0xffffff00, u8, pre, "tempoffset", tempoffset, 0, fb);
+	ENTRY(0xffffff00, u16, pre, "rawtempsense", rawtempsense, 0, fb);
+	ENTRY(0xffffff00, u8, pre, "measpower", measpower, 0, fb);
+	ENTRY(0xffffff00, u8, pre, "tempsense_slope", tempsense_slope, 0, fb);
+	ENTRY(0xffffff00, u8, pre, "tempcorrx", tempcorrx, 0, fb);
+	ENTRY(0xffffff00, u8, pre, "tempsense_option", tempsense_option, 0, fb);
+	ENTRY(0x00000700, u8, pre, "freqoffset_corr", freqoffset_corr, 0, fb);
+	ENTRY(0x00000700, u8, pre, "iqcal_swp_dis", iqcal_swp_dis, 0, fb);
+	ENTRY(0x00000700, u8, pre, "hw_iqcal_en", hw_iqcal_en, 0, fb);
+	ENTRY(0x00000700, u8, pre, "elna2g", elna2g, 0, fb);
+	ENTRY(0x00000700, u8, pre, "elna5g", elna5g, 0, fb);
+	ENTRY(0xffffff00, u8, pre, "phycal_tempdelta", phycal_tempdelta, 0, fb);
+	ENTRY(0xffffff00, u8, pre, "temps_period", temps_period, 0, fb);
+	ENTRY(0xffffff00, u8, pre, "temps_hysteresis", temps_hysteresis, 0, fb);
+	ENTRY(0xffffff00, u8, pre, "measpower1", measpower1, 0, fb);
+	ENTRY(0xffffff00, u8, pre, "measpower2", measpower2, 0, fb);
+
+	ENTRY(0x000001f0, u16, pre, "cck2gpo", cck2gpo, 0, fb);
+	ENTRY(0x000001f0, u32, pre, "ofdm2gpo", ofdm2gpo, 0, fb);
+	ENTRY(0x000001f0, u32, pre, "ofdm5gpo", ofdm5gpo, 0, fb);
+	ENTRY(0x000001f0, u32, pre, "ofdm5glpo", ofdm5glpo, 0, fb);
+	ENTRY(0x000001f0, u32, pre, "ofdm5ghpo", ofdm5ghpo, 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs2gpo0", mcs2gpo[0], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs2gpo1", mcs2gpo[1], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs2gpo2", mcs2gpo[2], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs2gpo3", mcs2gpo[3], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs2gpo4", mcs2gpo[4], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs2gpo5", mcs2gpo[5], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs2gpo6", mcs2gpo[6], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs2gpo7", mcs2gpo[7], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5gpo0", mcs5gpo[0], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5gpo1", mcs5gpo[1], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5gpo2", mcs5gpo[2], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5gpo3", mcs5gpo[3], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5gpo4", mcs5gpo[4], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5gpo5", mcs5gpo[5], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5gpo6", mcs5gpo[6], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5gpo7", mcs5gpo[7], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5glpo0", mcs5glpo[0], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5glpo1", mcs5glpo[1], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5glpo2", mcs5glpo[2], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5glpo3", mcs5glpo[3], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5glpo4", mcs5glpo[4], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5glpo5", mcs5glpo[5], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5glpo6", mcs5glpo[6], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5glpo7", mcs5glpo[7], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5ghpo0", mcs5ghpo[0], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5ghpo1", mcs5ghpo[1], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5ghpo2", mcs5ghpo[2], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5ghpo3", mcs5ghpo[3], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5ghpo4", mcs5ghpo[4], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5ghpo5", mcs5ghpo[5], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5ghpo6", mcs5ghpo[6], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5ghpo7", mcs5ghpo[7], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "cddpo", cddpo, 0, fb);
+	ENTRY(0x000001f0, u16, pre, "stbcpo", stbcpo, 0, fb);
+	ENTRY(0x000001f0, u16, pre, "bw40po", bw40po, 0, fb);
+	ENTRY(0x000001f0, u16, pre, "bwduppo", bwduppo, 0, fb);
+
+	ENTRY(0xfffffe00, u16, pre, "cckbw202gpo", cckbw202gpo, 0, fb);
+	ENTRY(0xfffffe00, u16, pre, "cckbw20ul2gpo", cckbw20ul2gpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "legofdmbw202gpo", legofdmbw202gpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "legofdmbw20ul2gpo", legofdmbw20ul2gpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "legofdmbw205glpo", legofdmbw205glpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "legofdmbw20ul5glpo", legofdmbw20ul5glpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "legofdmbw205gmpo", legofdmbw205gmpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "legofdmbw20ul5gmpo", legofdmbw20ul5gmpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "legofdmbw205ghpo", legofdmbw205ghpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "legofdmbw20ul5ghpo", legofdmbw20ul5ghpo, 0, fb);
+	ENTRY(0xfffffe00, u32, pre, "mcsbw202gpo", mcsbw202gpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "mcsbw20ul2gpo", mcsbw20ul2gpo, 0, fb);
+	ENTRY(0xfffffe00, u32, pre, "mcsbw402gpo", mcsbw402gpo, 0, fb);
+	ENTRY(0xfffffe00, u32, pre, "mcsbw205glpo", mcsbw205glpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "mcsbw20ul5glpo", mcsbw20ul5glpo, 0, fb);
+	ENTRY(0xfffffe00, u32, pre, "mcsbw405glpo", mcsbw405glpo, 0, fb);
+	ENTRY(0xfffffe00, u32, pre, "mcsbw205gmpo", mcsbw205gmpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "mcsbw20ul5gmpo", mcsbw20ul5gmpo, 0, fb);
+	ENTRY(0xfffffe00, u32, pre, "mcsbw405gmpo", mcsbw405gmpo, 0, fb);
+	ENTRY(0xfffffe00, u32, pre, "mcsbw205ghpo", mcsbw205ghpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "mcsbw20ul5ghpo", mcsbw20ul5ghpo, 0, fb);
+	ENTRY(0xfffffe00, u32, pre, "mcsbw405ghpo", mcsbw405ghpo, 0, fb);
+	ENTRY(0x00000600, u16, pre, "mcs32po", mcs32po, 0, fb);
+	ENTRY(0x00000600, u16, pre, "legofdm40duppo", legofdm40duppo, 0, fb);
+	ENTRY(0x00000700, u8, pre, "pcieingress_war", pcieingress_war, 0, fb);
+
+	/* TODO: rev 11 support */
+	ENTRY(0x00000700, u8, pre, "rxgainerr2ga0", rxgainerr2ga[0], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr2ga1", rxgainerr2ga[1], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr2ga2", rxgainerr2ga[2], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gla0", rxgainerr5gla[0], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gla1", rxgainerr5gla[1], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gla2", rxgainerr5gla[2], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gma0", rxgainerr5gma[0], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gma1", rxgainerr5gma[1], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gma2", rxgainerr5gma[2], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gha0", rxgainerr5gha[0], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gha1", rxgainerr5gha[1], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gha2", rxgainerr5gha[2], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gua0", rxgainerr5gua[0], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gua1", rxgainerr5gua[1], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gua2", rxgainerr5gua[2], 0, fb);
+
+	ENTRY(0xfffffe00, u8, pre, "sar2g", sar2g, 0, fb);
+	ENTRY(0xfffffe00, u8, pre, "sar5g", sar5g, 0, fb);
+
+	/* TODO: rev 11 support */
+	ENTRY(0x00000700, u8, pre, "noiselvl2ga0", noiselvl2ga[0], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl2ga1", noiselvl2ga[1], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl2ga2", noiselvl2ga[2], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gla0", noiselvl5gla[0], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gla1", noiselvl5gla[1], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gla2", noiselvl5gla[2], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gma0", noiselvl5gma[0], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gma1", noiselvl5gma[1], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gma2", noiselvl5gma[2], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gha0", noiselvl5gha[0], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gha1", noiselvl5gha[1], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gha2", noiselvl5gha[2], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gua0", noiselvl5gua[0], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gua1", noiselvl5gua[1], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gua2", noiselvl5gua[2], 0, fb);
+}
+#undef ENTRY /* It's specififc, uses local variable, don't use it (again). */
+
+static void bcm47xx_fill_sprom_path_r4589(struct ssb_sprom *sprom,
+					  const char *prefix, bool fallback)
+{
+	char postfix[2];
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) {
+		struct ssb_sprom_core_pwr_info *pwr_info;
+
+		pwr_info = &sprom->core_pwr_info[i];
+
+		snprintf(postfix, sizeof(postfix), "%i", i);
+		nvram_read_u8(prefix, postfix, "maxp2ga",
+			      &pwr_info->maxpwr_2g, 0, fallback);
+		nvram_read_u8(prefix, postfix, "itt2ga",
+			      &pwr_info->itssi_2g, 0, fallback);
+		nvram_read_u8(prefix, postfix, "itt5ga",
+			      &pwr_info->itssi_5g, 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa2gw0a",
+			       &pwr_info->pa_2g[0], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa2gw1a",
+			       &pwr_info->pa_2g[1], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa2gw2a",
+			       &pwr_info->pa_2g[2], 0, fallback);
+		nvram_read_u8(prefix, postfix, "maxp5ga",
+			      &pwr_info->maxpwr_5g, 0, fallback);
+		nvram_read_u8(prefix, postfix, "maxp5gha",
+			      &pwr_info->maxpwr_5gh, 0, fallback);
+		nvram_read_u8(prefix, postfix, "maxp5gla",
+			      &pwr_info->maxpwr_5gl, 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5gw0a",
+			       &pwr_info->pa_5g[0], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5gw1a",
+			       &pwr_info->pa_5g[1], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5gw2a",
+			       &pwr_info->pa_5g[2], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5glw0a",
+			       &pwr_info->pa_5gl[0], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5glw1a",
+			       &pwr_info->pa_5gl[1], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5glw2a",
+			       &pwr_info->pa_5gl[2], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5ghw0a",
+			       &pwr_info->pa_5gh[0], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5ghw1a",
+			       &pwr_info->pa_5gh[1], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5ghw2a",
+			       &pwr_info->pa_5gh[2], 0, fallback);
+	}
+}
+
+static void bcm47xx_fill_sprom_path_r45(struct ssb_sprom *sprom,
+					const char *prefix, bool fallback)
+{
+	char postfix[2];
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) {
+		struct ssb_sprom_core_pwr_info *pwr_info;
+
+		pwr_info = &sprom->core_pwr_info[i];
+
+		snprintf(postfix, sizeof(postfix), "%i", i);
+		nvram_read_u16(prefix, postfix, "pa2gw3a",
+			       &pwr_info->pa_2g[3], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5gw3a",
+			       &pwr_info->pa_5g[3], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5glw3a",
+			       &pwr_info->pa_5gl[3], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5ghw3a",
+			       &pwr_info->pa_5gh[3], 0, fallback);
+	}
+}
+
+static bool bcm47xx_is_valid_mac(u8 *mac)
+{
+	return mac && !(mac[0] == 0x00 && mac[1] == 0x90 && mac[2] == 0x4c);
+}
+
+static int bcm47xx_increase_mac_addr(u8 *mac, u8 num)
+{
+	u8 *oui = mac + ETH_ALEN/2 - 1;
+	u8 *p = mac + ETH_ALEN - 1;
+
+	do {
+		(*p) += num;
+		if (*p > num)
+			break;
+		p--;
+		num = 1;
+	} while (p != oui);
+
+	if (p == oui) {
+		pr_err("unable to fetch mac address\n");
+		return -ENOENT;
+	}
+	return 0;
+}
+
+static int mac_addr_used = 2;
+
+static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom,
+					const char *prefix, bool fallback)
+{
+	bool fb = fallback;
+
+	nvram_read_macaddr(prefix, "et0macaddr", sprom->et0mac, fallback);
+	nvram_read_u8(prefix, NULL, "et0mdcport", &sprom->et0mdcport, 0,
+		      fallback);
+	nvram_read_u8(prefix, NULL, "et0phyaddr", &sprom->et0phyaddr, 0,
+		      fallback);
+
+	nvram_read_macaddr(prefix, "et1macaddr", sprom->et1mac, fallback);
+	nvram_read_u8(prefix, NULL, "et1mdcport", &sprom->et1mdcport, 0,
+		      fallback);
+	nvram_read_u8(prefix, NULL, "et1phyaddr", &sprom->et1phyaddr, 0,
+		      fallback);
+
+	nvram_read_macaddr(prefix, "et2macaddr", sprom->et2mac, fb);
+	nvram_read_u8(prefix, NULL, "et2mdcport", &sprom->et2mdcport, 0, fb);
+	nvram_read_u8(prefix, NULL, "et2phyaddr", &sprom->et2phyaddr, 0, fb);
+
+	nvram_read_macaddr(prefix, "macaddr", sprom->il0mac, fallback);
+	nvram_read_macaddr(prefix, "il0macaddr", sprom->il0mac, fallback);
+
+	/* The address prefix 00:90:4C is used by Broadcom in their initial
+	 * configuration. When a mac address with the prefix 00:90:4C is used
+	 * all devices from the same series are sharing the same mac address.
+	 * To prevent mac address collisions we replace them with a mac address
+	 * based on the base address.
+	 */
+	if (!bcm47xx_is_valid_mac(sprom->il0mac)) {
+		u8 mac[6];
+
+		nvram_read_macaddr(NULL, "et0macaddr", mac, false);
+		if (bcm47xx_is_valid_mac(mac)) {
+			int err = bcm47xx_increase_mac_addr(mac, mac_addr_used);
+
+			if (!err) {
+				ether_addr_copy(sprom->il0mac, mac);
+				mac_addr_used++;
+			}
+		}
+	}
+}
+
+static void bcm47xx_fill_board_data(struct ssb_sprom *sprom, const char *prefix,
+				    bool fallback)
+{
+	nvram_read_u32_2(prefix, "boardflags", &sprom->boardflags_lo,
+			 &sprom->boardflags_hi, fallback);
+	nvram_read_u32_2(prefix, "boardflags2", &sprom->boardflags2_lo,
+			 &sprom->boardflags2_hi, fallback);
+}
+
+void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix,
+			bool fallback)
+{
+	bcm47xx_fill_sprom_ethernet(sprom, prefix, fallback);
+	bcm47xx_fill_board_data(sprom, prefix, fallback);
+
+	nvram_read_u8(prefix, NULL, "sromrev", &sprom->revision, 0, fallback);
+
+	/* Entries requiring custom functions */
+	nvram_read_alpha2(prefix, "ccode", sprom->alpha2, fallback);
+	if (sprom->revision >= 3)
+		nvram_read_leddc(prefix, "leddc", &sprom->leddc_on_time,
+				 &sprom->leddc_off_time, fallback);
+
+	switch (sprom->revision) {
+	case 4:
+	case 5:
+		bcm47xx_fill_sprom_path_r4589(sprom, prefix, fallback);
+		bcm47xx_fill_sprom_path_r45(sprom, prefix, fallback);
+		break;
+	case 8:
+	case 9:
+		bcm47xx_fill_sprom_path_r4589(sprom, prefix, fallback);
+		break;
+	}
+
+	bcm47xx_sprom_fill_auto(sprom, prefix, fallback);
+}
+
+#if IS_BUILTIN(CONFIG_SSB) && IS_ENABLED(CONFIG_SSB_SPROM)
+static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out)
+{
+	char prefix[10];
+
+	switch (bus->bustype) {
+	case SSB_BUSTYPE_SSB:
+		bcm47xx_fill_sprom(out, NULL, false);
+		return 0;
+	case SSB_BUSTYPE_PCI:
+		memset(out, 0, sizeof(struct ssb_sprom));
+		snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
+			 bus->host_pci->bus->number + 1,
+			 PCI_SLOT(bus->host_pci->devfn));
+		bcm47xx_fill_sprom(out, prefix, false);
+		return 0;
+	default:
+		pr_warn("Unable to fill SPROM for given bustype.\n");
+		return -EINVAL;
+	}
+}
+#endif
+
+#if IS_BUILTIN(CONFIG_BCMA)
+/*
+ * Having many NVRAM entries for PCI devices led to repeating prefixes like
+ * pci/1/1/ all the time and wasting flash space. So at some point Broadcom
+ * decided to introduce prefixes like 0: 1: 2: etc.
+ * If we find e.g. devpath0=pci/2/1 or devpath0=pci/2/1/ we should use 0:
+ * instead of pci/2/1/.
+ */
+static void bcm47xx_sprom_apply_prefix_alias(char *prefix, size_t prefix_size)
+{
+	size_t prefix_len = strlen(prefix);
+	size_t short_len = prefix_len - 1;
+	char nvram_var[10];
+	char buf[20];
+	int i;
+
+	/* Passed prefix has to end with a slash */
+	if (prefix_len <= 0 || prefix[prefix_len - 1] != '/')
+		return;
+
+	for (i = 0; i < 3; i++) {
+		if (snprintf(nvram_var, sizeof(nvram_var), "devpath%d", i) <= 0)
+			continue;
+		if (bcm47xx_nvram_getenv(nvram_var, buf, sizeof(buf)) < 0)
+			continue;
+		if (!strcmp(buf, prefix) ||
+		    (short_len && strlen(buf) == short_len && !strncmp(buf, prefix, short_len))) {
+			snprintf(prefix, prefix_size, "%d:", i);
+			return;
+		}
+	}
+}
+
+static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out)
+{
+	struct bcma_boardinfo *binfo = &bus->boardinfo;
+	struct bcma_device *core;
+	char buf[10];
+	char *prefix;
+	bool fallback = false;
+
+	switch (bus->hosttype) {
+	case BCMA_HOSTTYPE_PCI:
+		memset(out, 0, sizeof(struct ssb_sprom));
+		/* On BCM47XX all PCI buses share the same domain */
+		if (IS_ENABLED(CONFIG_BCM47XX))
+			snprintf(buf, sizeof(buf), "pci/%u/%u/",
+				 bus->host_pci->bus->number + 1,
+				 PCI_SLOT(bus->host_pci->devfn));
+		else
+			snprintf(buf, sizeof(buf), "pci/%u/%u/",
+				 pci_domain_nr(bus->host_pci->bus) + 1,
+				 bus->host_pci->bus->number);
+		bcm47xx_sprom_apply_prefix_alias(buf, sizeof(buf));
+		prefix = buf;
+		break;
+	case BCMA_HOSTTYPE_SOC:
+		memset(out, 0, sizeof(struct ssb_sprom));
+		core = bcma_find_core(bus, BCMA_CORE_80211);
+		if (core) {
+			snprintf(buf, sizeof(buf), "sb/%u/",
+				 core->core_index);
+			prefix = buf;
+			fallback = true;
+		} else {
+			prefix = NULL;
+		}
+		break;
+	default:
+		pr_warn("Unable to fill SPROM for given bustype.\n");
+		return -EINVAL;
+	}
+
+	nvram_read_u16(prefix, NULL, "boardvendor", &binfo->vendor, 0, true);
+	if (!binfo->vendor)
+		binfo->vendor = SSB_BOARDVENDOR_BCM;
+	nvram_read_u16(prefix, NULL, "boardtype", &binfo->type, 0, true);
+
+	bcm47xx_fill_sprom(out, prefix, fallback);
+
+	return 0;
+}
+#endif
+
+static unsigned int bcm47xx_sprom_registered;
+
+/*
+ * On bcm47xx we need to register SPROM fallback handler very early, so we can't
+ * use anything like platform device / driver for this.
+ */
+int bcm47xx_sprom_register_fallbacks(void)
+{
+	if (bcm47xx_sprom_registered)
+		return 0;
+
+#if IS_BUILTIN(CONFIG_SSB) && IS_ENABLED(CONFIG_SSB_SPROM)
+	if (ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom_ssb))
+		pr_warn("Failed to register ssb SPROM handler\n");
+#endif
+
+#if IS_BUILTIN(CONFIG_BCMA)
+	if (bcma_arch_register_fallback_sprom(&bcm47xx_get_sprom_bcma))
+		pr_warn("Failed to register bcma SPROM handler\n");
+#endif
+
+	bcm47xx_sprom_registered = 1;
+
+	return 0;
+}
+
+fs_initcall(bcm47xx_sprom_register_fallbacks);
diff --git a/drivers/firmware/broadcom/tee_bnxt_fw.c b/drivers/firmware/broadcom/tee_bnxt_fw.c
new file mode 100644
index 000000000..40e3183a3
--- /dev/null
+++ b/drivers/firmware/broadcom/tee_bnxt_fw.c
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Broadcom.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+#include <linux/tee_drv.h>
+#include <linux/uuid.h>
+
+#include <linux/firmware/broadcom/tee_bnxt_fw.h>
+
+#define MAX_SHM_MEM_SZ	SZ_4M
+
+#define MAX_TEE_PARAM_ARRY_MEMB		4
+
+enum ta_cmd {
+	/*
+	 * TA_CMD_BNXT_FASTBOOT - boot bnxt device by copying f/w into sram
+	 *
+	 *	param[0] unused
+	 *	param[1] unused
+	 *	param[2] unused
+	 *	param[3] unused
+	 *
+	 * Result:
+	 *	TEE_SUCCESS - Invoke command success
+	 *	TEE_ERROR_ITEM_NOT_FOUND - Corrupt f/w image found on memory
+	 */
+	TA_CMD_BNXT_FASTBOOT = 0,
+
+	/*
+	 * TA_CMD_BNXT_COPY_COREDUMP - copy the core dump into shm
+	 *
+	 *	param[0] (inout memref) - Coredump buffer memory reference
+	 *	param[1] (in value) - value.a: offset, data to be copied from
+	 *			      value.b: size of data to be copied
+	 *	param[2] unused
+	 *	param[3] unused
+	 *
+	 * Result:
+	 *	TEE_SUCCESS - Invoke command success
+	 *	TEE_ERROR_BAD_PARAMETERS - Incorrect input param
+	 *	TEE_ERROR_ITEM_NOT_FOUND - Corrupt core dump
+	 */
+	TA_CMD_BNXT_COPY_COREDUMP = 3,
+};
+
+/**
+ * struct tee_bnxt_fw_private - OP-TEE bnxt private data
+ * @dev:		OP-TEE based bnxt device.
+ * @ctx:		OP-TEE context handler.
+ * @session_id:		TA session identifier.
+ */
+struct tee_bnxt_fw_private {
+	struct device *dev;
+	struct tee_context *ctx;
+	u32 session_id;
+	struct tee_shm *fw_shm_pool;
+};
+
+static struct tee_bnxt_fw_private pvt_data;
+
+static void prepare_args(int cmd,
+			 struct tee_ioctl_invoke_arg *arg,
+			 struct tee_param *param)
+{
+	memset(arg, 0, sizeof(*arg));
+	memset(param, 0, MAX_TEE_PARAM_ARRY_MEMB * sizeof(*param));
+
+	arg->func = cmd;
+	arg->session = pvt_data.session_id;
+	arg->num_params = MAX_TEE_PARAM_ARRY_MEMB;
+
+	/* Fill invoke cmd params */
+	switch (cmd) {
+	case TA_CMD_BNXT_COPY_COREDUMP:
+		param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT;
+		param[0].u.memref.shm = pvt_data.fw_shm_pool;
+		param[0].u.memref.size = MAX_SHM_MEM_SZ;
+		param[0].u.memref.shm_offs = 0;
+		param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
+		break;
+	case TA_CMD_BNXT_FASTBOOT:
+	default:
+		/* Nothing to do */
+		break;
+	}
+}
+
+/**
+ * tee_bnxt_fw_load() - Load the bnxt firmware
+ *		    Uses an OP-TEE call to start a secure
+ *		    boot process.
+ * Returns 0 on success, negative errno otherwise.
+ */
+int tee_bnxt_fw_load(void)
+{
+	int ret = 0;
+	struct tee_ioctl_invoke_arg arg;
+	struct tee_param param[MAX_TEE_PARAM_ARRY_MEMB];
+
+	if (!pvt_data.ctx)
+		return -ENODEV;
+
+	prepare_args(TA_CMD_BNXT_FASTBOOT, &arg, param);
+
+	ret = tee_client_invoke_func(pvt_data.ctx, &arg, param);
+	if (ret < 0 || arg.ret != 0) {
+		dev_err(pvt_data.dev,
+			"TA_CMD_BNXT_FASTBOOT invoke failed TEE err: %x, ret:%x\n",
+			arg.ret, ret);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(tee_bnxt_fw_load);
+
+/**
+ * tee_bnxt_copy_coredump() - Copy coredump from the allocated memory
+ *			    Uses an OP-TEE call to copy coredump
+ * @buf:	destination buffer where core dump is copied into
+ * @offset:	offset from the base address of core dump area
+ * @size:	size of the dump
+ *
+ * Returns 0 on success, negative errno otherwise.
+ */
+int tee_bnxt_copy_coredump(void *buf, u32 offset, u32 size)
+{
+	struct tee_ioctl_invoke_arg arg;
+	struct tee_param param[MAX_TEE_PARAM_ARRY_MEMB];
+	void *core_data;
+	u32 rbytes = size;
+	u32 nbytes = 0;
+	int ret = 0;
+
+	if (!pvt_data.ctx)
+		return -ENODEV;
+
+	prepare_args(TA_CMD_BNXT_COPY_COREDUMP, &arg, param);
+
+	while (rbytes)  {
+		nbytes = rbytes;
+
+		nbytes = min_t(u32, rbytes, param[0].u.memref.size);
+
+		/* Fill additional invoke cmd params */
+		param[1].u.value.a = offset;
+		param[1].u.value.b = nbytes;
+
+		ret = tee_client_invoke_func(pvt_data.ctx, &arg, param);
+		if (ret < 0 || arg.ret != 0) {
+			dev_err(pvt_data.dev,
+				"TA_CMD_BNXT_COPY_COREDUMP invoke failed TEE err: %x, ret:%x\n",
+				arg.ret, ret);
+			return -EINVAL;
+		}
+
+		core_data = tee_shm_get_va(pvt_data.fw_shm_pool, 0);
+		if (IS_ERR(core_data)) {
+			dev_err(pvt_data.dev, "tee_shm_get_va failed\n");
+			return PTR_ERR(core_data);
+		}
+
+		memcpy(buf, core_data, nbytes);
+
+		rbytes -= nbytes;
+		buf += nbytes;
+		offset += nbytes;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(tee_bnxt_copy_coredump);
+
+static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
+{
+	return (ver->impl_id == TEE_IMPL_ID_OPTEE);
+}
+
+static int tee_bnxt_fw_probe(struct device *dev)
+{
+	struct tee_client_device *bnxt_device = to_tee_client_device(dev);
+	int ret, err = -ENODEV;
+	struct tee_ioctl_open_session_arg sess_arg;
+	struct tee_shm *fw_shm_pool;
+
+	memset(&sess_arg, 0, sizeof(sess_arg));
+
+	/* Open context with TEE driver */
+	pvt_data.ctx = tee_client_open_context(NULL, optee_ctx_match, NULL,
+					       NULL);
+	if (IS_ERR(pvt_data.ctx))
+		return -ENODEV;
+
+	/* Open session with Bnxt load Trusted App */
+	export_uuid(sess_arg.uuid, &bnxt_device->id.uuid);
+	sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC;
+	sess_arg.num_params = 0;
+
+	ret = tee_client_open_session(pvt_data.ctx, &sess_arg, NULL);
+	if (ret < 0 || sess_arg.ret != 0) {
+		dev_err(dev, "tee_client_open_session failed, err: %x\n",
+			sess_arg.ret);
+		err = -EINVAL;
+		goto out_ctx;
+	}
+	pvt_data.session_id = sess_arg.session;
+
+	pvt_data.dev = dev;
+
+	fw_shm_pool = tee_shm_alloc_kernel_buf(pvt_data.ctx, MAX_SHM_MEM_SZ);
+	if (IS_ERR(fw_shm_pool)) {
+		dev_err(pvt_data.dev, "tee_shm_alloc_kernel_buf failed\n");
+		err = PTR_ERR(fw_shm_pool);
+		goto out_sess;
+	}
+
+	pvt_data.fw_shm_pool = fw_shm_pool;
+
+	return 0;
+
+out_sess:
+	tee_client_close_session(pvt_data.ctx, pvt_data.session_id);
+out_ctx:
+	tee_client_close_context(pvt_data.ctx);
+
+	return err;
+}
+
+static int tee_bnxt_fw_remove(struct device *dev)
+{
+	tee_shm_free(pvt_data.fw_shm_pool);
+	tee_client_close_session(pvt_data.ctx, pvt_data.session_id);
+	tee_client_close_context(pvt_data.ctx);
+	pvt_data.ctx = NULL;
+
+	return 0;
+}
+
+static void tee_bnxt_fw_shutdown(struct device *dev)
+{
+	tee_shm_free(pvt_data.fw_shm_pool);
+	tee_client_close_session(pvt_data.ctx, pvt_data.session_id);
+	tee_client_close_context(pvt_data.ctx);
+	pvt_data.ctx = NULL;
+}
+
+static const struct tee_client_device_id tee_bnxt_fw_id_table[] = {
+	{UUID_INIT(0x6272636D, 0x2019, 0x0716,
+		    0x42, 0x43, 0x4D, 0x5F, 0x53, 0x43, 0x48, 0x49)},
+	{}
+};
+
+MODULE_DEVICE_TABLE(tee, tee_bnxt_fw_id_table);
+
+static struct tee_client_driver tee_bnxt_fw_driver = {
+	.id_table	= tee_bnxt_fw_id_table,
+	.driver		= {
+		.name		= KBUILD_MODNAME,
+		.bus		= &tee_bus_type,
+		.probe		= tee_bnxt_fw_probe,
+		.remove		= tee_bnxt_fw_remove,
+		.shutdown	= tee_bnxt_fw_shutdown,
+	},
+};
+
+static int __init tee_bnxt_fw_mod_init(void)
+{
+	return driver_register(&tee_bnxt_fw_driver.driver);
+}
+
+static void __exit tee_bnxt_fw_mod_exit(void)
+{
+	driver_unregister(&tee_bnxt_fw_driver.driver);
+}
+
+module_init(tee_bnxt_fw_mod_init);
+module_exit(tee_bnxt_fw_mod_exit);
+
+MODULE_AUTHOR("Vikas Gupta <vikas.gupta@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom bnxt firmware manager");
+MODULE_LICENSE("GPL v2");