aboutsummaryrefslogtreecommitdiff
path: root/drivers/firmware/efi/cper-arm.c
diff options
context:
space:
mode:
authorLibravatar Linus Torvalds <torvalds@linux-foundation.org>2023-02-21 18:24:12 -0800
committerLibravatar Linus Torvalds <torvalds@linux-foundation.org>2023-02-21 18:24:12 -0800
commit5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 (patch)
treecc5c2d0a898769fd59549594fedb3ee6f84e59a0 /drivers/firmware/efi/cper-arm.c
downloadlinux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.tar.gz
linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.zip
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted
Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
Diffstat (limited to 'drivers/firmware/efi/cper-arm.c')
-rw-r--r--drivers/firmware/efi/cper-arm.c342
1 files changed, 342 insertions, 0 deletions
diff --git a/drivers/firmware/efi/cper-arm.c b/drivers/firmware/efi/cper-arm.c
new file mode 100644
index 000000000..36d3b8b9d
--- /dev/null
+++ b/drivers/firmware/efi/cper-arm.c
@@ -0,0 +1,342 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * UEFI Common Platform Error Record (CPER) support
+ *
+ * Copyright (C) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/time.h>
+#include <linux/cper.h>
+#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <linux/pci.h>
+#include <linux/aer.h>
+#include <linux/printk.h>
+#include <linux/bcd.h>
+#include <acpi/ghes.h>
+#include <ras/ras_event.h>
+
+static const char * const arm_reg_ctx_strs[] = {
+ "AArch32 general purpose registers",
+ "AArch32 EL1 context registers",
+ "AArch32 EL2 context registers",
+ "AArch32 secure context registers",
+ "AArch64 general purpose registers",
+ "AArch64 EL1 context registers",
+ "AArch64 EL2 context registers",
+ "AArch64 EL3 context registers",
+ "Misc. system register structure",
+};
+
+static const char * const arm_err_trans_type_strs[] = {
+ "Instruction",
+ "Data Access",
+ "Generic",
+};
+
+static const char * const arm_bus_err_op_strs[] = {
+ "Generic error (type cannot be determined)",
+ "Generic read (type of instruction or data request cannot be determined)",
+ "Generic write (type of instruction of data request cannot be determined)",
+ "Data read",
+ "Data write",
+ "Instruction fetch",
+ "Prefetch",
+};
+
+static const char * const arm_cache_err_op_strs[] = {
+ "Generic error (type cannot be determined)",
+ "Generic read (type of instruction or data request cannot be determined)",
+ "Generic write (type of instruction of data request cannot be determined)",
+ "Data read",
+ "Data write",
+ "Instruction fetch",
+ "Prefetch",
+ "Eviction",
+ "Snooping (processor initiated a cache snoop that resulted in an error)",
+ "Snooped (processor raised a cache error caused by another processor or device snooping its cache)",
+ "Management",
+};
+
+static const char * const arm_tlb_err_op_strs[] = {
+ "Generic error (type cannot be determined)",
+ "Generic read (type of instruction or data request cannot be determined)",
+ "Generic write (type of instruction of data request cannot be determined)",
+ "Data read",
+ "Data write",
+ "Instruction fetch",
+ "Prefetch",
+ "Local management operation (processor initiated a TLB management operation that resulted in an error)",
+ "External management operation (processor raised a TLB error caused by another processor or device broadcasting TLB operations)",
+};
+
+static const char * const arm_bus_err_part_type_strs[] = {
+ "Local processor originated request",
+ "Local processor responded to request",
+ "Local processor observed",
+ "Generic",
+};
+
+static const char * const arm_bus_err_addr_space_strs[] = {
+ "External Memory Access",
+ "Internal Memory Access",
+ "Unknown",
+ "Device Memory Access",
+};
+
+static void cper_print_arm_err_info(const char *pfx, u32 type,
+ u64 error_info)
+{
+ u8 trans_type, op_type, level, participation_type, address_space;
+ u16 mem_attributes;
+ bool proc_context_corrupt, corrected, precise_pc, restartable_pc;
+ bool time_out, access_mode;
+
+ /* If the type is unknown, bail. */
+ if (type > CPER_ARM_MAX_TYPE)
+ return;
+
+ /*
+ * Vendor type errors have error information values that are vendor
+ * specific.
+ */
+ if (type == CPER_ARM_VENDOR_ERROR)
+ return;
+
+ if (error_info & CPER_ARM_ERR_VALID_TRANSACTION_TYPE) {
+ trans_type = ((error_info >> CPER_ARM_ERR_TRANSACTION_SHIFT)
+ & CPER_ARM_ERR_TRANSACTION_MASK);
+ if (trans_type < ARRAY_SIZE(arm_err_trans_type_strs)) {
+ printk("%stransaction type: %s\n", pfx,
+ arm_err_trans_type_strs[trans_type]);
+ }
+ }
+
+ if (error_info & CPER_ARM_ERR_VALID_OPERATION_TYPE) {
+ op_type = ((error_info >> CPER_ARM_ERR_OPERATION_SHIFT)
+ & CPER_ARM_ERR_OPERATION_MASK);
+ switch (type) {
+ case CPER_ARM_CACHE_ERROR:
+ if (op_type < ARRAY_SIZE(arm_cache_err_op_strs)) {
+ printk("%soperation type: %s\n", pfx,
+ arm_cache_err_op_strs[op_type]);
+ }
+ break;
+ case CPER_ARM_TLB_ERROR:
+ if (op_type < ARRAY_SIZE(arm_tlb_err_op_strs)) {
+ printk("%soperation type: %s\n", pfx,
+ arm_tlb_err_op_strs[op_type]);
+ }
+ break;
+ case CPER_ARM_BUS_ERROR:
+ if (op_type < ARRAY_SIZE(arm_bus_err_op_strs)) {
+ printk("%soperation type: %s\n", pfx,
+ arm_bus_err_op_strs[op_type]);
+ }
+ break;
+ }
+ }
+
+ if (error_info & CPER_ARM_ERR_VALID_LEVEL) {
+ level = ((error_info >> CPER_ARM_ERR_LEVEL_SHIFT)
+ & CPER_ARM_ERR_LEVEL_MASK);
+ switch (type) {
+ case CPER_ARM_CACHE_ERROR:
+ printk("%scache level: %d\n", pfx, level);
+ break;
+ case CPER_ARM_TLB_ERROR:
+ printk("%sTLB level: %d\n", pfx, level);
+ break;
+ case CPER_ARM_BUS_ERROR:
+ printk("%saffinity level at which the bus error occurred: %d\n",
+ pfx, level);
+ break;
+ }
+ }
+
+ if (error_info & CPER_ARM_ERR_VALID_PROC_CONTEXT_CORRUPT) {
+ proc_context_corrupt = ((error_info >> CPER_ARM_ERR_PC_CORRUPT_SHIFT)
+ & CPER_ARM_ERR_PC_CORRUPT_MASK);
+ if (proc_context_corrupt)
+ printk("%sprocessor context corrupted\n", pfx);
+ else
+ printk("%sprocessor context not corrupted\n", pfx);
+ }
+
+ if (error_info & CPER_ARM_ERR_VALID_CORRECTED) {
+ corrected = ((error_info >> CPER_ARM_ERR_CORRECTED_SHIFT)
+ & CPER_ARM_ERR_CORRECTED_MASK);
+ if (corrected)
+ printk("%sthe error has been corrected\n", pfx);
+ else
+ printk("%sthe error has not been corrected\n", pfx);
+ }
+
+ if (error_info & CPER_ARM_ERR_VALID_PRECISE_PC) {
+ precise_pc = ((error_info >> CPER_ARM_ERR_PRECISE_PC_SHIFT)
+ & CPER_ARM_ERR_PRECISE_PC_MASK);
+ if (precise_pc)
+ printk("%sPC is precise\n", pfx);
+ else
+ printk("%sPC is imprecise\n", pfx);
+ }
+
+ if (error_info & CPER_ARM_ERR_VALID_RESTARTABLE_PC) {
+ restartable_pc = ((error_info >> CPER_ARM_ERR_RESTARTABLE_PC_SHIFT)
+ & CPER_ARM_ERR_RESTARTABLE_PC_MASK);
+ if (restartable_pc)
+ printk("%sProgram execution can be restarted reliably at the PC associated with the error.\n", pfx);
+ }
+
+ /* The rest of the fields are specific to bus errors */
+ if (type != CPER_ARM_BUS_ERROR)
+ return;
+
+ if (error_info & CPER_ARM_ERR_VALID_PARTICIPATION_TYPE) {
+ participation_type = ((error_info >> CPER_ARM_ERR_PARTICIPATION_TYPE_SHIFT)
+ & CPER_ARM_ERR_PARTICIPATION_TYPE_MASK);
+ if (participation_type < ARRAY_SIZE(arm_bus_err_part_type_strs)) {
+ printk("%sparticipation type: %s\n", pfx,
+ arm_bus_err_part_type_strs[participation_type]);
+ }
+ }
+
+ if (error_info & CPER_ARM_ERR_VALID_TIME_OUT) {
+ time_out = ((error_info >> CPER_ARM_ERR_TIME_OUT_SHIFT)
+ & CPER_ARM_ERR_TIME_OUT_MASK);
+ if (time_out)
+ printk("%srequest timed out\n", pfx);
+ }
+
+ if (error_info & CPER_ARM_ERR_VALID_ADDRESS_SPACE) {
+ address_space = ((error_info >> CPER_ARM_ERR_ADDRESS_SPACE_SHIFT)
+ & CPER_ARM_ERR_ADDRESS_SPACE_MASK);
+ if (address_space < ARRAY_SIZE(arm_bus_err_addr_space_strs)) {
+ printk("%saddress space: %s\n", pfx,
+ arm_bus_err_addr_space_strs[address_space]);
+ }
+ }
+
+ if (error_info & CPER_ARM_ERR_VALID_MEM_ATTRIBUTES) {
+ mem_attributes = ((error_info >> CPER_ARM_ERR_MEM_ATTRIBUTES_SHIFT)
+ & CPER_ARM_ERR_MEM_ATTRIBUTES_MASK);
+ printk("%smemory access attributes:0x%x\n", pfx, mem_attributes);
+ }
+
+ if (error_info & CPER_ARM_ERR_VALID_ACCESS_MODE) {
+ access_mode = ((error_info >> CPER_ARM_ERR_ACCESS_MODE_SHIFT)
+ & CPER_ARM_ERR_ACCESS_MODE_MASK);
+ if (access_mode)
+ printk("%saccess mode: normal\n", pfx);
+ else
+ printk("%saccess mode: secure\n", pfx);
+ }
+}
+
+void cper_print_proc_arm(const char *pfx,
+ const struct cper_sec_proc_arm *proc)
+{
+ int i, len, max_ctx_type;
+ struct cper_arm_err_info *err_info;
+ struct cper_arm_ctx_info *ctx_info;
+ char newpfx[64], infopfx[64];
+
+ printk("%sMIDR: 0x%016llx\n", pfx, proc->midr);
+
+ len = proc->section_length - (sizeof(*proc) +
+ proc->err_info_num * (sizeof(*err_info)));
+ if (len < 0) {
+ printk("%ssection length: %d\n", pfx, proc->section_length);
+ printk("%ssection length is too small\n", pfx);
+ printk("%sfirmware-generated error record is incorrect\n", pfx);
+ printk("%sERR_INFO_NUM is %d\n", pfx, proc->err_info_num);
+ return;
+ }
+
+ if (proc->validation_bits & CPER_ARM_VALID_MPIDR)
+ printk("%sMultiprocessor Affinity Register (MPIDR): 0x%016llx\n",
+ pfx, proc->mpidr);
+
+ if (proc->validation_bits & CPER_ARM_VALID_AFFINITY_LEVEL)
+ printk("%serror affinity level: %d\n", pfx,
+ proc->affinity_level);
+
+ if (proc->validation_bits & CPER_ARM_VALID_RUNNING_STATE) {
+ printk("%srunning state: 0x%x\n", pfx, proc->running_state);
+ printk("%sPower State Coordination Interface state: %d\n",
+ pfx, proc->psci_state);
+ }
+
+ snprintf(newpfx, sizeof(newpfx), "%s ", pfx);
+
+ err_info = (struct cper_arm_err_info *)(proc + 1);
+ for (i = 0; i < proc->err_info_num; i++) {
+ printk("%sError info structure %d:\n", pfx, i);
+
+ printk("%snum errors: %d\n", pfx, err_info->multiple_error + 1);
+
+ if (err_info->validation_bits & CPER_ARM_INFO_VALID_FLAGS) {
+ if (err_info->flags & CPER_ARM_INFO_FLAGS_FIRST)
+ printk("%sfirst error captured\n", newpfx);
+ if (err_info->flags & CPER_ARM_INFO_FLAGS_LAST)
+ printk("%slast error captured\n", newpfx);
+ if (err_info->flags & CPER_ARM_INFO_FLAGS_PROPAGATED)
+ printk("%spropagated error captured\n",
+ newpfx);
+ if (err_info->flags & CPER_ARM_INFO_FLAGS_OVERFLOW)
+ printk("%soverflow occurred, error info is incomplete\n",
+ newpfx);
+ }
+
+ printk("%serror_type: %d, %s\n", newpfx, err_info->type,
+ err_info->type < ARRAY_SIZE(cper_proc_error_type_strs) ?
+ cper_proc_error_type_strs[err_info->type] : "unknown");
+ if (err_info->validation_bits & CPER_ARM_INFO_VALID_ERR_INFO) {
+ printk("%serror_info: 0x%016llx\n", newpfx,
+ err_info->error_info);
+ snprintf(infopfx, sizeof(infopfx), "%s ", newpfx);
+ cper_print_arm_err_info(infopfx, err_info->type,
+ err_info->error_info);
+ }
+ if (err_info->validation_bits & CPER_ARM_INFO_VALID_VIRT_ADDR)
+ printk("%svirtual fault address: 0x%016llx\n",
+ newpfx, err_info->virt_fault_addr);
+ if (err_info->validation_bits & CPER_ARM_INFO_VALID_PHYSICAL_ADDR)
+ printk("%sphysical fault address: 0x%016llx\n",
+ newpfx, err_info->physical_fault_addr);
+ err_info += 1;
+ }
+
+ ctx_info = (struct cper_arm_ctx_info *)err_info;
+ max_ctx_type = ARRAY_SIZE(arm_reg_ctx_strs) - 1;
+ for (i = 0; i < proc->context_info_num; i++) {
+ int size = sizeof(*ctx_info) + ctx_info->size;
+
+ printk("%sContext info structure %d:\n", pfx, i);
+ if (len < size) {
+ printk("%ssection length is too small\n", newpfx);
+ printk("%sfirmware-generated error record is incorrect\n", pfx);
+ return;
+ }
+ if (ctx_info->type > max_ctx_type) {
+ printk("%sInvalid context type: %d (max: %d)\n",
+ newpfx, ctx_info->type, max_ctx_type);
+ return;
+ }
+ printk("%sregister context type: %s\n", newpfx,
+ arm_reg_ctx_strs[ctx_info->type]);
+ print_hex_dump(newpfx, "", DUMP_PREFIX_OFFSET, 16, 4,
+ (ctx_info + 1), ctx_info->size, 0);
+ len -= size;
+ ctx_info = (struct cper_arm_ctx_info *)((long)ctx_info + size);
+ }
+
+ if (len > 0) {
+ printk("%sVendor specific error info has %u bytes:\n", pfx,
+ len);
+ print_hex_dump(newpfx, "", DUMP_PREFIX_OFFSET, 16, 4, ctx_info,
+ len, true);
+ }
+}