Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 175 insertions, 0 deletions

diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
new file mode 100644
index 000000000..80d85a516
--- /dev/null
+++ b/drivers/firmware/efi/libstub/Makefile
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# The stub may be linked into the kernel proper or into a separate boot binary,
+# but in either case, it executes before the kernel does (with MMU disabled) so
+# things like ftrace and stack-protector are likely to cause trouble if left
+# enabled, even if doing so doesn't break the build.
+#
+
+# non-x86 reuses KBUILD_CFLAGS, x86 does not
+cflags-y			:= $(KBUILD_CFLAGS)
+
+cflags-$(CONFIG_X86_32)		:= -march=i386
+cflags-$(CONFIG_X86_64)		:= -mcmodel=small
+cflags-$(CONFIG_X86)		+= -m$(BITS) -D__KERNEL__ \
+				   -fPIC -fno-strict-aliasing -mno-red-zone \
+				   -mno-mmx -mno-sse -fshort-wchar \
+				   -Wno-pointer-sign \
+				   $(call cc-disable-warning, address-of-packed-member) \
+				   $(call cc-disable-warning, gnu) \
+				   -fno-asynchronous-unwind-tables \
+				   $(CLANG_FLAGS)
+
+# arm64 uses the full KBUILD_CFLAGS so it's necessary to explicitly
+# disable the stackleak plugin
+cflags-$(CONFIG_ARM64)		+= -fpie $(DISABLE_STACKLEAK_PLUGIN) \
+				   -fno-unwind-tables -fno-asynchronous-unwind-tables \
+				   $(call cc-option,-mbranch-protection=none)
+cflags-$(CONFIG_ARM)		+= -DEFI_HAVE_STRLEN -DEFI_HAVE_STRNLEN \
+				   -DEFI_HAVE_MEMCHR -DEFI_HAVE_STRRCHR \
+				   -DEFI_HAVE_STRCMP -fno-builtin -fpic \
+				   $(call cc-option,-mno-single-pic-base)
+cflags-$(CONFIG_RISCV)		+= -fpic
+cflags-$(CONFIG_LOONGARCH)	+= -fpie
+
+cflags-$(CONFIG_EFI_PARAMS_FROM_FDT)	+= -I$(srctree)/scripts/dtc/libfdt
+
+KBUILD_CFLAGS			:= $(subst $(CC_FLAGS_FTRACE),,$(cflags-y)) \
+				   -Os -DDISABLE_BRANCH_PROFILING \
+				   -include $(srctree)/include/linux/hidden.h \
+				   -D__NO_FORTIFY \
+				   -ffreestanding \
+				   -fno-stack-protector \
+				   $(call cc-option,-fno-addrsig) \
+				   -D__DISABLE_EXPORTS
+
+#
+# struct randomization only makes sense for Linux internal types, which the EFI
+# stub code never touches, so let's turn off struct randomization for the stub
+# altogether
+#
+KBUILD_CFLAGS := $(filter-out $(RANDSTRUCT_CFLAGS), $(KBUILD_CFLAGS))
+
+# remove SCS flags from all objects in this directory
+KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_SCS), $(KBUILD_CFLAGS))
+# disable CFI
+KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_CFI), $(KBUILD_CFLAGS))
+# disable LTO
+KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_LTO), $(KBUILD_CFLAGS))
+
+GCOV_PROFILE			:= n
+# Sanitizer runtimes are unavailable and cannot be linked here.
+KASAN_SANITIZE			:= n
+KCSAN_SANITIZE			:= n
+KMSAN_SANITIZE			:= n
+UBSAN_SANITIZE			:= n
+OBJECT_FILES_NON_STANDARD	:= y
+
+# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
+KCOV_INSTRUMENT			:= n
+
+lib-y				:= efi-stub-helper.o gop.o secureboot.o tpm.o \
+				   file.o mem.o random.o randomalloc.o pci.o \
+				   skip_spaces.o lib-cmdline.o lib-ctype.o \
+				   alignedmem.o relocate.o printk.o vsprintf.o
+
+# include the stub's libfdt dependencies from lib/ when needed
+libfdt-deps			:= fdt_rw.c fdt_ro.c fdt_wip.c fdt.c \
+				   fdt_empty_tree.c fdt_sw.c
+
+lib-$(CONFIG_EFI_PARAMS_FROM_FDT) += fdt.o \
+				     $(patsubst %.c,lib-%.o,$(libfdt-deps))
+
+$(obj)/lib-%.o: $(srctree)/lib/%.c FORCE
+	$(call if_changed_rule,cc_o_c)
+
+lib-$(CONFIG_EFI_GENERIC_STUB)	+= efi-stub.o string.o intrinsics.o systable.o \
+				   screen_info.o efi-stub-entry.o
+
+lib-$(CONFIG_ARM)		+= arm32-stub.o
+lib-$(CONFIG_ARM64)		+= arm64.o arm64-stub.o smbios.o
+lib-$(CONFIG_X86)		+= x86-stub.o
+lib-$(CONFIG_RISCV)		+= riscv.o riscv-stub.o
+lib-$(CONFIG_LOONGARCH)		+= loongarch.o loongarch-stub.o
+
+CFLAGS_arm32-stub.o		:= -DTEXT_OFFSET=$(TEXT_OFFSET)
+
+zboot-obj-$(CONFIG_RISCV)	:= lib-clz_ctz.o lib-ashldi3.o
+lib-$(CONFIG_EFI_ZBOOT)		+= zboot.o $(zboot-obj-y)
+
+extra-y				:= $(lib-y)
+lib-y				:= $(patsubst %.o,%.stub.o,$(lib-y))
+
+# Even when -mbranch-protection=none is set, Clang will generate a
+# .note.gnu.property for code-less object files (like lib/ctype.c),
+# so work around this by explicitly removing the unwanted section.
+# https://bugs.llvm.org/show_bug.cgi?id=46480
+STUBCOPY_FLAGS-y		+= --remove-section=.note.gnu.property
+
+#
+# For x86, bootloaders like systemd-boot or grub-efi do not zero-initialize the
+# .bss section, so the .bss section of the EFI stub needs to be included in the
+# .data section of the compressed kernel to ensure initialization. Rename the
+# .bss section here so it's easy to pick out in the linker script.
+#
+STUBCOPY_FLAGS-$(CONFIG_X86)	+= --rename-section .bss=.bss.efistub,load,alloc
+STUBCOPY_RELOC-$(CONFIG_X86_32)	:= R_386_32
+STUBCOPY_RELOC-$(CONFIG_X86_64)	:= R_X86_64_64
+
+#
+# ARM discards the .data section because it disallows r/w data in the
+# decompressor. So move our .data to .data.efistub and .bss to .bss.efistub,
+# which are preserved explicitly by the decompressor linker script.
+#
+STUBCOPY_FLAGS-$(CONFIG_ARM)	+= --rename-section .data=.data.efistub	\
+				   --rename-section .bss=.bss.efistub,load,alloc
+STUBCOPY_RELOC-$(CONFIG_ARM)	:= R_ARM_ABS
+
+#
+# arm64 puts the stub in the kernel proper, which will unnecessarily retain all
+# code indefinitely unless it is annotated as __init/__initdata/__initconst etc.
+# So let's apply the __init annotations at the section level, by prefixing
+# the section names directly. This will ensure that even all the inline string
+# literals are covered.
+# The fact that the stub and the kernel proper are essentially the same binary
+# also means that we need to be extra careful to make sure that the stub does
+# not rely on any absolute symbol references, considering that the virtual
+# kernel mapping that the linker uses is not active yet when the stub is
+# executing. So build all C dependencies of the EFI stub into libstub, and do
+# a verification pass to see if any absolute relocations exist in any of the
+# object files.
+#
+STUBCOPY_FLAGS-$(CONFIG_ARM64)	+= --prefix-alloc-sections=.init \
+				   --prefix-symbols=__efistub_
+STUBCOPY_RELOC-$(CONFIG_ARM64)	:= R_AARCH64_ABS
+
+# For RISC-V, we don't need anything special other than arm64. Keep all the
+# symbols in .init section and make sure that no absolute symbols references
+# doesn't exist.
+STUBCOPY_FLAGS-$(CONFIG_RISCV)	+= --prefix-alloc-sections=.init \
+				   --prefix-symbols=__efistub_
+STUBCOPY_RELOC-$(CONFIG_RISCV)	:= R_RISCV_HI20
+
+# For LoongArch, keep all the symbols in .init section and make sure that no
+# absolute symbols references exist.
+STUBCOPY_FLAGS-$(CONFIG_LOONGARCH)	+= --prefix-alloc-sections=.init \
+					   --prefix-symbols=__efistub_
+STUBCOPY_RELOC-$(CONFIG_LOONGARCH)	:= R_LARCH_MARK_LA
+
+$(obj)/%.stub.o: $(obj)/%.o FORCE
+	$(call if_changed,stubcopy)
+
+#
+# Strip debug sections and some other sections that may legally contain
+# absolute relocations, so that we can inspect the remaining sections for
+# such relocations. If none are found, regenerate the output object, but
+# this time, use objcopy and leave all sections in place.
+#
+quiet_cmd_stubcopy = STUBCPY $@
+      cmd_stubcopy =							\
+	$(STRIP) --strip-debug -o $@ $<;				\
+	if $(OBJDUMP) -r $@ | grep $(STUBCOPY_RELOC-y); then		\
+		echo "$@: absolute symbol references not allowed in the EFI stub" >&2; \
+		/bin/false;						\
+	fi;								\
+	$(OBJCOPY) $(STUBCOPY_FLAGS-y) $< $@