Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 167 insertions, 0 deletions

diff --git a/drivers/firmware/efi/libstub/tpm.c b/drivers/firmware/efi/libstub/tpm.c
new file mode 100644
index 000000000..7acbac16e
--- /dev/null
+++ b/drivers/firmware/efi/libstub/tpm.c
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TPM handling.
+ *
+ * Copyright (C) 2016 CoreOS, Inc
+ * Copyright (C) 2017 Google, Inc.
+ *     Matthew Garrett <mjg59@google.com>
+ *     Thiebaud Weksteen <tweek@google.com>
+ */
+#include <linux/efi.h>
+#include <linux/tpm_eventlog.h>
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+#ifdef CONFIG_RESET_ATTACK_MITIGATION
+static const efi_char16_t efi_MemoryOverWriteRequest_name[] =
+	L"MemoryOverwriteRequestControl";
+
+#define MEMORY_ONLY_RESET_CONTROL_GUID \
+	EFI_GUID(0xe20939be, 0x32d4, 0x41be, 0xa1, 0x50, 0x89, 0x7f, 0x85, 0xd4, 0x98, 0x29)
+
+/*
+ * Enable reboot attack mitigation. This requests that the firmware clear the
+ * RAM on next reboot before proceeding with boot, ensuring that any secrets
+ * are cleared. If userland has ensured that all secrets have been removed
+ * from RAM before reboot it can simply reset this variable.
+ */
+void efi_enable_reset_attack_mitigation(void)
+{
+	u8 val = 1;
+	efi_guid_t var_guid = MEMORY_ONLY_RESET_CONTROL_GUID;
+	efi_status_t status;
+	unsigned long datasize = 0;
+
+	status = get_efi_var(efi_MemoryOverWriteRequest_name, &var_guid,
+			     NULL, &datasize, NULL);
+
+	if (status == EFI_NOT_FOUND)
+		return;
+
+	set_efi_var(efi_MemoryOverWriteRequest_name, &var_guid,
+		    EFI_VARIABLE_NON_VOLATILE |
+		    EFI_VARIABLE_BOOTSERVICE_ACCESS |
+		    EFI_VARIABLE_RUNTIME_ACCESS, sizeof(val), &val);
+}
+
+#endif
+
+void efi_retrieve_tpm2_eventlog(void)
+{
+	efi_guid_t tcg2_guid = EFI_TCG2_PROTOCOL_GUID;
+	efi_guid_t linux_eventlog_guid = LINUX_EFI_TPM_EVENT_LOG_GUID;
+	efi_status_t status;
+	efi_physical_addr_t log_location = 0, log_last_entry = 0;
+	struct linux_efi_tpm_eventlog *log_tbl = NULL;
+	struct efi_tcg2_final_events_table *final_events_table = NULL;
+	unsigned long first_entry_addr, last_entry_addr;
+	size_t log_size, last_entry_size;
+	efi_bool_t truncated;
+	int version = EFI_TCG2_EVENT_LOG_FORMAT_TCG_2;
+	efi_tcg2_protocol_t *tcg2_protocol = NULL;
+	int final_events_size = 0;
+
+	status = efi_bs_call(locate_protocol, &tcg2_guid, NULL,
+			     (void **)&tcg2_protocol);
+	if (status != EFI_SUCCESS)
+		return;
+
+	status = efi_call_proto(tcg2_protocol, get_event_log, version,
+				&log_location, &log_last_entry, &truncated);
+
+	if (status != EFI_SUCCESS || !log_location) {
+		version = EFI_TCG2_EVENT_LOG_FORMAT_TCG_1_2;
+		status = efi_call_proto(tcg2_protocol, get_event_log, version,
+					&log_location, &log_last_entry,
+					&truncated);
+		if (status != EFI_SUCCESS || !log_location)
+			return;
+
+	}
+
+	first_entry_addr = (unsigned long) log_location;
+
+	/*
+	 * We populate the EFI table even if the logs are empty.
+	 */
+	if (!log_last_entry) {
+		log_size = 0;
+	} else {
+		last_entry_addr = (unsigned long) log_last_entry;
+		/*
+		 * get_event_log only returns the address of the last entry.
+		 * We need to calculate its size to deduce the full size of
+		 * the logs.
+		 */
+		if (version == EFI_TCG2_EVENT_LOG_FORMAT_TCG_2) {
+			/*
+			 * The TCG2 log format has variable length entries,
+			 * and the information to decode the hash algorithms
+			 * back into a size is contained in the first entry -
+			 * pass a pointer to the final entry (to calculate its
+			 * size) and the first entry (so we know how long each
+			 * digest is)
+			 */
+			last_entry_size =
+				__calc_tpm2_event_size((void *)last_entry_addr,
+						    (void *)(long)log_location,
+						    false);
+		} else {
+			last_entry_size = sizeof(struct tcpa_event) +
+			   ((struct tcpa_event *) last_entry_addr)->event_size;
+		}
+		log_size = log_last_entry - log_location + last_entry_size;
+	}
+
+	/* Allocate space for the logs and copy them. */
+	status = efi_bs_call(allocate_pool, EFI_LOADER_DATA,
+			     sizeof(*log_tbl) + log_size, (void **)&log_tbl);
+
+	if (status != EFI_SUCCESS) {
+		efi_err("Unable to allocate memory for event log\n");
+		return;
+	}
+
+	/*
+	 * Figure out whether any events have already been logged to the
+	 * final events structure, and if so how much space they take up
+	 */
+	if (version == EFI_TCG2_EVENT_LOG_FORMAT_TCG_2)
+		final_events_table = get_efi_config_table(LINUX_EFI_TPM_FINAL_LOG_GUID);
+	if (final_events_table && final_events_table->nr_events) {
+		struct tcg_pcr_event2_head *header;
+		int offset;
+		void *data;
+		int event_size;
+		int i = final_events_table->nr_events;
+
+		data = (void *)final_events_table;
+		offset = sizeof(final_events_table->version) +
+			sizeof(final_events_table->nr_events);
+
+		while (i > 0) {
+			header = data + offset + final_events_size;
+			event_size = __calc_tpm2_event_size(header,
+						   (void *)(long)log_location,
+						   false);
+			final_events_size += event_size;
+			i--;
+		}
+	}
+
+	memset(log_tbl, 0, sizeof(*log_tbl) + log_size);
+	log_tbl->size = log_size;
+	log_tbl->final_events_preboot_size = final_events_size;
+	log_tbl->version = version;
+	memcpy(log_tbl->log, (void *) first_entry_addr, log_size);
+
+	status = efi_bs_call(install_configuration_table,
+			     &linux_eventlog_guid, log_tbl);
+	if (status != EFI_SUCCESS)
+		goto err_free;
+	return;
+
+err_free:
+	efi_bs_call(free_pool, log_tbl);
+}