Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 419 insertions, 0 deletions

diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c
new file mode 100644
index 000000000..8e59be378
--- /dev/null
+++ b/drivers/firmware/memmap.c
@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/drivers/firmware/memmap.c
+ *  Copyright (C) 2008 SUSE LINUX Products GmbH
+ *  by Bernhard Walle <bernhard.walle@gmx.de>
+ */
+
+#include <linux/string.h>
+#include <linux/firmware-map.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/memblock.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+
+/*
+ * Data types ------------------------------------------------------------------
+ */
+
+/*
+ * Firmware map entry. Because firmware memory maps are flat and not
+ * hierarchical, it's ok to organise them in a linked list. No parent
+ * information is necessary as for the resource tree.
+ */
+struct firmware_map_entry {
+	/*
+	 * start and end must be u64 rather than resource_size_t, because e820
+	 * resources can lie at addresses above 4G.
+	 */
+	u64			start;	/* start of the memory range */
+	u64			end;	/* end of the memory range (incl.) */
+	const char		*type;	/* type of the memory range */
+	struct list_head	list;	/* entry for the linked list */
+	struct kobject		kobj;   /* kobject for each entry */
+};
+
+/*
+ * Forward declarations --------------------------------------------------------
+ */
+static ssize_t memmap_attr_show(struct kobject *kobj,
+				struct attribute *attr, char *buf);
+static ssize_t start_show(struct firmware_map_entry *entry, char *buf);
+static ssize_t end_show(struct firmware_map_entry *entry, char *buf);
+static ssize_t type_show(struct firmware_map_entry *entry, char *buf);
+
+static struct firmware_map_entry * __meminit
+firmware_map_find_entry(u64 start, u64 end, const char *type);
+
+/*
+ * Static data -----------------------------------------------------------------
+ */
+
+struct memmap_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct firmware_map_entry *entry, char *buf);
+};
+
+static struct memmap_attribute memmap_start_attr = __ATTR_RO(start);
+static struct memmap_attribute memmap_end_attr   = __ATTR_RO(end);
+static struct memmap_attribute memmap_type_attr  = __ATTR_RO(type);
+
+/*
+ * These are default attributes that are added for every memmap entry.
+ */
+static struct attribute *def_attrs[] = {
+	&memmap_start_attr.attr,
+	&memmap_end_attr.attr,
+	&memmap_type_attr.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(def);
+
+static const struct sysfs_ops memmap_attr_ops = {
+	.show = memmap_attr_show,
+};
+
+/* Firmware memory map entries. */
+static LIST_HEAD(map_entries);
+static DEFINE_SPINLOCK(map_entries_lock);
+
+/*
+ * For memory hotplug, there is no way to free memory map entries allocated
+ * by boot mem after the system is up. So when we hot-remove memory whose
+ * map entry is allocated by bootmem, we need to remember the storage and
+ * reuse it when the memory is hot-added again.
+ */
+static LIST_HEAD(map_entries_bootmem);
+static DEFINE_SPINLOCK(map_entries_bootmem_lock);
+
+
+static inline struct firmware_map_entry *
+to_memmap_entry(struct kobject *kobj)
+{
+	return container_of(kobj, struct firmware_map_entry, kobj);
+}
+
+static void __meminit release_firmware_map_entry(struct kobject *kobj)
+{
+	struct firmware_map_entry *entry = to_memmap_entry(kobj);
+
+	if (PageReserved(virt_to_page(entry))) {
+		/*
+		 * Remember the storage allocated by bootmem, and reuse it when
+		 * the memory is hot-added again. The entry will be added to
+		 * map_entries_bootmem here, and deleted from &map_entries in
+		 * firmware_map_remove_entry().
+		 */
+		spin_lock(&map_entries_bootmem_lock);
+		list_add(&entry->list, &map_entries_bootmem);
+		spin_unlock(&map_entries_bootmem_lock);
+
+		return;
+	}
+
+	kfree(entry);
+}
+
+static struct kobj_type __refdata memmap_ktype = {
+	.release	= release_firmware_map_entry,
+	.sysfs_ops	= &memmap_attr_ops,
+	.default_groups	= def_groups,
+};
+
+/*
+ * Registration functions ------------------------------------------------------
+ */
+
+/**
+ * firmware_map_add_entry() - Does the real work to add a firmware memmap entry.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (exclusive).
+ * @type:  Type of the memory range.
+ * @entry: Pre-allocated (either kmalloc() or bootmem allocator), uninitialised
+ *         entry.
+ *
+ * Common implementation of firmware_map_add() and firmware_map_add_early()
+ * which expects a pre-allocated struct firmware_map_entry.
+ *
+ * Return: 0 always
+ */
+static int firmware_map_add_entry(u64 start, u64 end,
+				  const char *type,
+				  struct firmware_map_entry *entry)
+{
+	BUG_ON(start > end);
+
+	entry->start = start;
+	entry->end = end - 1;
+	entry->type = type;
+	INIT_LIST_HEAD(&entry->list);
+	kobject_init(&entry->kobj, &memmap_ktype);
+
+	spin_lock(&map_entries_lock);
+	list_add_tail(&entry->list, &map_entries);
+	spin_unlock(&map_entries_lock);
+
+	return 0;
+}
+
+/**
+ * firmware_map_remove_entry() - Does the real work to remove a firmware
+ * memmap entry.
+ * @entry: removed entry.
+ *
+ * The caller must hold map_entries_lock, and release it properly.
+ */
+static inline void firmware_map_remove_entry(struct firmware_map_entry *entry)
+{
+	list_del(&entry->list);
+}
+
+/*
+ * Add memmap entry on sysfs
+ */
+static int add_sysfs_fw_map_entry(struct firmware_map_entry *entry)
+{
+	static int map_entries_nr;
+	static struct kset *mmap_kset;
+
+	if (entry->kobj.state_in_sysfs)
+		return -EEXIST;
+
+	if (!mmap_kset) {
+		mmap_kset = kset_create_and_add("memmap", NULL, firmware_kobj);
+		if (!mmap_kset)
+			return -ENOMEM;
+	}
+
+	entry->kobj.kset = mmap_kset;
+	if (kobject_add(&entry->kobj, NULL, "%d", map_entries_nr++))
+		kobject_put(&entry->kobj);
+
+	return 0;
+}
+
+/*
+ * Remove memmap entry on sysfs
+ */
+static inline void remove_sysfs_fw_map_entry(struct firmware_map_entry *entry)
+{
+	kobject_put(&entry->kobj);
+}
+
+/**
+ * firmware_map_find_entry_in_list() - Search memmap entry in a given list.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (exclusive).
+ * @type:  Type of the memory range.
+ * @list:  In which to find the entry.
+ *
+ * This function is to find the memmap entey of a given memory range in a
+ * given list. The caller must hold map_entries_lock, and must not release
+ * the lock until the processing of the returned entry has completed.
+ *
+ * Return: Pointer to the entry to be found on success, or NULL on failure.
+ */
+static struct firmware_map_entry * __meminit
+firmware_map_find_entry_in_list(u64 start, u64 end, const char *type,
+				struct list_head *list)
+{
+	struct firmware_map_entry *entry;
+
+	list_for_each_entry(entry, list, list)
+		if ((entry->start == start) && (entry->end == end) &&
+		    (!strcmp(entry->type, type))) {
+			return entry;
+		}
+
+	return NULL;
+}
+
+/**
+ * firmware_map_find_entry() - Search memmap entry in map_entries.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (exclusive).
+ * @type:  Type of the memory range.
+ *
+ * This function is to find the memmap entey of a given memory range.
+ * The caller must hold map_entries_lock, and must not release the lock
+ * until the processing of the returned entry has completed.
+ *
+ * Return: Pointer to the entry to be found on success, or NULL on failure.
+ */
+static struct firmware_map_entry * __meminit
+firmware_map_find_entry(u64 start, u64 end, const char *type)
+{
+	return firmware_map_find_entry_in_list(start, end, type, &map_entries);
+}
+
+/**
+ * firmware_map_find_entry_bootmem() - Search memmap entry in map_entries_bootmem.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (exclusive).
+ * @type:  Type of the memory range.
+ *
+ * This function is similar to firmware_map_find_entry except that it find the
+ * given entry in map_entries_bootmem.
+ *
+ * Return: Pointer to the entry to be found on success, or NULL on failure.
+ */
+static struct firmware_map_entry * __meminit
+firmware_map_find_entry_bootmem(u64 start, u64 end, const char *type)
+{
+	return firmware_map_find_entry_in_list(start, end, type,
+					       &map_entries_bootmem);
+}
+
+/**
+ * firmware_map_add_hotplug() - Adds a firmware mapping entry when we do
+ * memory hotplug.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (exclusive)
+ * @type:  Type of the memory range.
+ *
+ * Adds a firmware mapping entry. This function is for memory hotplug, it is
+ * similar to function firmware_map_add_early(). The only difference is that
+ * it will create the syfs entry dynamically.
+ *
+ * Return: 0 on success, or -ENOMEM if no memory could be allocated.
+ */
+int __meminit firmware_map_add_hotplug(u64 start, u64 end, const char *type)
+{
+	struct firmware_map_entry *entry;
+
+	entry = firmware_map_find_entry(start, end - 1, type);
+	if (entry)
+		return 0;
+
+	entry = firmware_map_find_entry_bootmem(start, end - 1, type);
+	if (!entry) {
+		entry = kzalloc(sizeof(struct firmware_map_entry), GFP_ATOMIC);
+		if (!entry)
+			return -ENOMEM;
+	} else {
+		/* Reuse storage allocated by bootmem. */
+		spin_lock(&map_entries_bootmem_lock);
+		list_del(&entry->list);
+		spin_unlock(&map_entries_bootmem_lock);
+
+		memset(entry, 0, sizeof(*entry));
+	}
+
+	firmware_map_add_entry(start, end, type, entry);
+	/* create the memmap entry */
+	add_sysfs_fw_map_entry(entry);
+
+	return 0;
+}
+
+/**
+ * firmware_map_add_early() - Adds a firmware mapping entry.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range.
+ * @type:  Type of the memory range.
+ *
+ * Adds a firmware mapping entry. This function uses the bootmem allocator
+ * for memory allocation.
+ *
+ * That function must be called before late_initcall.
+ *
+ * Return: 0 on success, or -ENOMEM if no memory could be allocated.
+ */
+int __init firmware_map_add_early(u64 start, u64 end, const char *type)
+{
+	struct firmware_map_entry *entry;
+
+	entry = memblock_alloc(sizeof(struct firmware_map_entry),
+			       SMP_CACHE_BYTES);
+	if (WARN_ON(!entry))
+		return -ENOMEM;
+
+	return firmware_map_add_entry(start, end, type, entry);
+}
+
+/**
+ * firmware_map_remove() - remove a firmware mapping entry
+ * @start: Start of the memory range.
+ * @end:   End of the memory range.
+ * @type:  Type of the memory range.
+ *
+ * removes a firmware mapping entry.
+ *
+ * Return: 0 on success, or -EINVAL if no entry.
+ */
+int __meminit firmware_map_remove(u64 start, u64 end, const char *type)
+{
+	struct firmware_map_entry *entry;
+
+	spin_lock(&map_entries_lock);
+	entry = firmware_map_find_entry(start, end - 1, type);
+	if (!entry) {
+		spin_unlock(&map_entries_lock);
+		return -EINVAL;
+	}
+
+	firmware_map_remove_entry(entry);
+	spin_unlock(&map_entries_lock);
+
+	/* remove the memmap entry */
+	remove_sysfs_fw_map_entry(entry);
+
+	return 0;
+}
+
+/*
+ * Sysfs functions -------------------------------------------------------------
+ */
+
+static ssize_t start_show(struct firmware_map_entry *entry, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "0x%llx\n",
+		(unsigned long long)entry->start);
+}
+
+static ssize_t end_show(struct firmware_map_entry *entry, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "0x%llx\n",
+		(unsigned long long)entry->end);
+}
+
+static ssize_t type_show(struct firmware_map_entry *entry, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%s\n", entry->type);
+}
+
+static inline struct memmap_attribute *to_memmap_attr(struct attribute *attr)
+{
+	return container_of(attr, struct memmap_attribute, attr);
+}
+
+static ssize_t memmap_attr_show(struct kobject *kobj,
+				struct attribute *attr, char *buf)
+{
+	struct firmware_map_entry *entry = to_memmap_entry(kobj);
+	struct memmap_attribute *memmap_attr = to_memmap_attr(attr);
+
+	return memmap_attr->show(entry, buf);
+}
+
+/*
+ * Initialises stuff and adds the entries in the map_entries list to
+ * sysfs. Important is that firmware_map_add() and firmware_map_add_early()
+ * must be called before late_initcall. That's just because that function
+ * is called as late_initcall() function, which means that if you call
+ * firmware_map_add() or firmware_map_add_early() afterwards, the entries
+ * are not added to sysfs.
+ */
+static int __init firmware_memmap_init(void)
+{
+	struct firmware_map_entry *entry;
+
+	list_for_each_entry(entry, &map_entries, list)
+		add_sysfs_fw_map_entry(entry);
+
+	return 0;
+}
+late_initcall(firmware_memmap_init);
+