Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 312 insertions, 0 deletions

diff --git a/drivers/gpio/gpio-104-idi-48.c b/drivers/gpio/gpio-104-idi-48.c
new file mode 100644
index 000000000..c5e231fde
--- /dev/null
+++ b/drivers/gpio/gpio-104-idi-48.c
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GPIO driver for the ACCES 104-IDI-48 family
+ * Copyright (C) 2015 William Breathitt Gray
+ *
+ * This driver supports the following ACCES devices: 104-IDI-48A,
+ * 104-IDI-48AC, 104-IDI-48B, and 104-IDI-48BC.
+ */
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/irqdesc.h>
+#include <linux/isa.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include "gpio-i8255.h"
+
+MODULE_IMPORT_NS(I8255);
+
+#define IDI_48_EXTENT 8
+#define MAX_NUM_IDI_48 max_num_isa_dev(IDI_48_EXTENT)
+
+static unsigned int base[MAX_NUM_IDI_48];
+static unsigned int num_idi_48;
+module_param_hw_array(base, uint, ioport, &num_idi_48, 0);
+MODULE_PARM_DESC(base, "ACCES 104-IDI-48 base addresses");
+
+static unsigned int irq[MAX_NUM_IDI_48];
+static unsigned int num_irq;
+module_param_hw_array(irq, uint, irq, &num_irq, 0);
+MODULE_PARM_DESC(irq, "ACCES 104-IDI-48 interrupt line numbers");
+
+/**
+ * struct idi_48_reg - device register structure
+ * @port0:	Port 0 Inputs
+ * @unused:	Unused
+ * @port1:	Port 1 Inputs
+ * @irq:	Read: IRQ Status Register/IRQ Clear
+ *		Write: IRQ Enable/Disable
+ */
+struct idi_48_reg {
+	u8 port0[3];
+	u8 unused;
+	u8 port1[3];
+	u8 irq;
+};
+
+/**
+ * struct idi_48_gpio - GPIO device private data structure
+ * @chip:	instance of the gpio_chip
+ * @lock:	synchronization lock to prevent I/O race conditions
+ * @irq_mask:	input bits affected by interrupts
+ * @reg:	I/O address offset for the device registers
+ * @cos_enb:	Change-Of-State IRQ enable boundaries mask
+ */
+struct idi_48_gpio {
+	struct gpio_chip chip;
+	spinlock_t lock;
+	unsigned char irq_mask[6];
+	struct idi_48_reg __iomem *reg;
+	unsigned char cos_enb;
+};
+
+static int idi_48_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int idi_48_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
+{
+	return 0;
+}
+
+static int idi_48_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
+	void __iomem *const ppi = idi48gpio->reg;
+
+	return i8255_get(ppi, offset);
+}
+
+static int idi_48_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+	unsigned long *bits)
+{
+	struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
+	void __iomem *const ppi = idi48gpio->reg;
+
+	i8255_get_multiple(ppi, mask, bits, chip->ngpio);
+
+	return 0;
+}
+
+static void idi_48_irq_ack(struct irq_data *data)
+{
+}
+
+static void idi_48_irq_mask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
+	const unsigned int offset = irqd_to_hwirq(data);
+	const unsigned long boundary = offset / 8;
+	const unsigned long mask = BIT(offset % 8);
+	unsigned long flags;
+
+	spin_lock_irqsave(&idi48gpio->lock, flags);
+
+	idi48gpio->irq_mask[boundary] &= ~mask;
+	gpiochip_disable_irq(chip, offset);
+
+	/* Exit early if there are still input lines with IRQ unmasked */
+	if (idi48gpio->irq_mask[boundary])
+		goto exit;
+
+	idi48gpio->cos_enb &= ~BIT(boundary);
+
+	iowrite8(idi48gpio->cos_enb, &idi48gpio->reg->irq);
+
+exit:
+	spin_unlock_irqrestore(&idi48gpio->lock, flags);
+}
+
+static void idi_48_irq_unmask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
+	const unsigned int offset = irqd_to_hwirq(data);
+	const unsigned long boundary = offset / 8;
+	const unsigned long mask = BIT(offset % 8);
+	unsigned int prev_irq_mask;
+	unsigned long flags;
+
+	spin_lock_irqsave(&idi48gpio->lock, flags);
+
+	prev_irq_mask = idi48gpio->irq_mask[boundary];
+
+	gpiochip_enable_irq(chip, offset);
+	idi48gpio->irq_mask[boundary] |= mask;
+
+	/* Exit early if IRQ was already unmasked for this boundary */
+	if (prev_irq_mask)
+		goto exit;
+
+	idi48gpio->cos_enb |= BIT(boundary);
+
+	iowrite8(idi48gpio->cos_enb, &idi48gpio->reg->irq);
+
+exit:
+	spin_unlock_irqrestore(&idi48gpio->lock, flags);
+}
+
+static int idi_48_irq_set_type(struct irq_data *data, unsigned int flow_type)
+{
+	/* The only valid irq types are none and both-edges */
+	if (flow_type != IRQ_TYPE_NONE &&
+		(flow_type & IRQ_TYPE_EDGE_BOTH) != IRQ_TYPE_EDGE_BOTH)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct irq_chip idi_48_irqchip = {
+	.name = "104-idi-48",
+	.irq_ack = idi_48_irq_ack,
+	.irq_mask = idi_48_irq_mask,
+	.irq_unmask = idi_48_irq_unmask,
+	.irq_set_type = idi_48_irq_set_type,
+	.flags = IRQCHIP_IMMUTABLE,
+	GPIOCHIP_IRQ_RESOURCE_HELPERS,
+};
+
+static irqreturn_t idi_48_irq_handler(int irq, void *dev_id)
+{
+	struct idi_48_gpio *const idi48gpio = dev_id;
+	unsigned long cos_status;
+	unsigned long boundary;
+	unsigned long irq_mask;
+	unsigned long bit_num;
+	unsigned long gpio;
+	struct gpio_chip *const chip = &idi48gpio->chip;
+
+	spin_lock(&idi48gpio->lock);
+
+	cos_status = ioread8(&idi48gpio->reg->irq);
+
+	/* IRQ Status (bit 6) is active low (0 = IRQ generated by device) */
+	if (cos_status & BIT(6)) {
+		spin_unlock(&idi48gpio->lock);
+		return IRQ_NONE;
+	}
+
+	/* Bit 0-5 indicate which Change-Of-State boundary triggered the IRQ */
+	cos_status &= 0x3F;
+
+	for_each_set_bit(boundary, &cos_status, 6) {
+		irq_mask = idi48gpio->irq_mask[boundary];
+
+		for_each_set_bit(bit_num, &irq_mask, 8) {
+			gpio = bit_num + boundary * 8;
+
+			generic_handle_domain_irq(chip->irq.domain,
+						  gpio);
+		}
+	}
+
+	spin_unlock(&idi48gpio->lock);
+
+	return IRQ_HANDLED;
+}
+
+#define IDI48_NGPIO 48
+static const char *idi48_names[IDI48_NGPIO] = {
+	"Bit 0 A", "Bit 1 A", "Bit 2 A", "Bit 3 A", "Bit 4 A", "Bit 5 A",
+	"Bit 6 A", "Bit 7 A", "Bit 8 A", "Bit 9 A", "Bit 10 A", "Bit 11 A",
+	"Bit 12 A", "Bit 13 A", "Bit 14 A", "Bit 15 A",	"Bit 16 A", "Bit 17 A",
+	"Bit 18 A", "Bit 19 A", "Bit 20 A", "Bit 21 A", "Bit 22 A", "Bit 23 A",
+	"Bit 0 B", "Bit 1 B", "Bit 2 B", "Bit 3 B", "Bit 4 B", "Bit 5 B",
+	"Bit 6 B", "Bit 7 B", "Bit 8 B", "Bit 9 B", "Bit 10 B", "Bit 11 B",
+	"Bit 12 B", "Bit 13 B", "Bit 14 B", "Bit 15 B",	"Bit 16 B", "Bit 17 B",
+	"Bit 18 B", "Bit 19 B", "Bit 20 B", "Bit 21 B", "Bit 22 B", "Bit 23 B"
+};
+
+static int idi_48_irq_init_hw(struct gpio_chip *gc)
+{
+	struct idi_48_gpio *const idi48gpio = gpiochip_get_data(gc);
+
+	/* Disable IRQ by default */
+	iowrite8(0, &idi48gpio->reg->irq);
+	ioread8(&idi48gpio->reg->irq);
+
+	return 0;
+}
+
+static int idi_48_probe(struct device *dev, unsigned int id)
+{
+	struct idi_48_gpio *idi48gpio;
+	const char *const name = dev_name(dev);
+	struct gpio_irq_chip *girq;
+	int err;
+
+	idi48gpio = devm_kzalloc(dev, sizeof(*idi48gpio), GFP_KERNEL);
+	if (!idi48gpio)
+		return -ENOMEM;
+
+	if (!devm_request_region(dev, base[id], IDI_48_EXTENT, name)) {
+		dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
+			base[id], base[id] + IDI_48_EXTENT);
+		return -EBUSY;
+	}
+
+	idi48gpio->reg = devm_ioport_map(dev, base[id], IDI_48_EXTENT);
+	if (!idi48gpio->reg)
+		return -ENOMEM;
+
+	idi48gpio->chip.label = name;
+	idi48gpio->chip.parent = dev;
+	idi48gpio->chip.owner = THIS_MODULE;
+	idi48gpio->chip.base = -1;
+	idi48gpio->chip.ngpio = IDI48_NGPIO;
+	idi48gpio->chip.names = idi48_names;
+	idi48gpio->chip.get_direction = idi_48_gpio_get_direction;
+	idi48gpio->chip.direction_input = idi_48_gpio_direction_input;
+	idi48gpio->chip.get = idi_48_gpio_get;
+	idi48gpio->chip.get_multiple = idi_48_gpio_get_multiple;
+
+	girq = &idi48gpio->chip.irq;
+	gpio_irq_chip_set_chip(girq, &idi_48_irqchip);
+	/* This will let us handle the parent IRQ in the driver */
+	girq->parent_handler = NULL;
+	girq->num_parents = 0;
+	girq->parents = NULL;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_edge_irq;
+	girq->init_hw = idi_48_irq_init_hw;
+
+	spin_lock_init(&idi48gpio->lock);
+
+	err = devm_gpiochip_add_data(dev, &idi48gpio->chip, idi48gpio);
+	if (err) {
+		dev_err(dev, "GPIO registering failed (%d)\n", err);
+		return err;
+	}
+
+	err = devm_request_irq(dev, irq[id], idi_48_irq_handler, IRQF_SHARED,
+		name, idi48gpio);
+	if (err) {
+		dev_err(dev, "IRQ handler registering failed (%d)\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static struct isa_driver idi_48_driver = {
+	.probe = idi_48_probe,
+	.driver = {
+		.name = "104-idi-48"
+	},
+};
+module_isa_driver_with_irq(idi_48_driver, num_idi_48, num_irq);
+
+MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
+MODULE_DESCRIPTION("ACCES 104-IDI-48 GPIO driver");
+MODULE_LICENSE("GPL v2");