Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 540 insertions, 0 deletions

diff --git a/drivers/gpio/gpio-adnp.c b/drivers/gpio/gpio-adnp.c
new file mode 100644
index 000000000..a6439e3da
--- /dev/null
+++ b/drivers/gpio/gpio-adnp.c
@@ -0,0 +1,540 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011-2012 Avionic Design GmbH
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+
+#define GPIO_DDR(gpio) (0x00 << (gpio)->reg_shift)
+#define GPIO_PLR(gpio) (0x01 << (gpio)->reg_shift)
+#define GPIO_IER(gpio) (0x02 << (gpio)->reg_shift)
+#define GPIO_ISR(gpio) (0x03 << (gpio)->reg_shift)
+#define GPIO_PTR(gpio) (0x04 << (gpio)->reg_shift)
+
+struct adnp {
+	struct i2c_client *client;
+	struct gpio_chip gpio;
+	unsigned int reg_shift;
+
+	struct mutex i2c_lock;
+	struct mutex irq_lock;
+
+	u8 *irq_enable;
+	u8 *irq_level;
+	u8 *irq_rise;
+	u8 *irq_fall;
+	u8 *irq_high;
+	u8 *irq_low;
+};
+
+static int adnp_read(struct adnp *adnp, unsigned offset, uint8_t *value)
+{
+	int err;
+
+	err = i2c_smbus_read_byte_data(adnp->client, offset);
+	if (err < 0) {
+		dev_err(adnp->gpio.parent, "%s failed: %d\n",
+			"i2c_smbus_read_byte_data()", err);
+		return err;
+	}
+
+	*value = err;
+	return 0;
+}
+
+static int adnp_write(struct adnp *adnp, unsigned offset, uint8_t value)
+{
+	int err;
+
+	err = i2c_smbus_write_byte_data(adnp->client, offset, value);
+	if (err < 0) {
+		dev_err(adnp->gpio.parent, "%s failed: %d\n",
+			"i2c_smbus_write_byte_data()", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int adnp_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct adnp *adnp = gpiochip_get_data(chip);
+	unsigned int reg = offset >> adnp->reg_shift;
+	unsigned int pos = offset & 7;
+	u8 value;
+	int err;
+
+	err = adnp_read(adnp, GPIO_PLR(adnp) + reg, &value);
+	if (err < 0)
+		return err;
+
+	return (value & BIT(pos)) ? 1 : 0;
+}
+
+static void __adnp_gpio_set(struct adnp *adnp, unsigned offset, int value)
+{
+	unsigned int reg = offset >> adnp->reg_shift;
+	unsigned int pos = offset & 7;
+	int err;
+	u8 val;
+
+	err = adnp_read(adnp, GPIO_PLR(adnp) + reg, &val);
+	if (err < 0)
+		return;
+
+	if (value)
+		val |= BIT(pos);
+	else
+		val &= ~BIT(pos);
+
+	adnp_write(adnp, GPIO_PLR(adnp) + reg, val);
+}
+
+static void adnp_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct adnp *adnp = gpiochip_get_data(chip);
+
+	mutex_lock(&adnp->i2c_lock);
+	__adnp_gpio_set(adnp, offset, value);
+	mutex_unlock(&adnp->i2c_lock);
+}
+
+static int adnp_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct adnp *adnp = gpiochip_get_data(chip);
+	unsigned int reg = offset >> adnp->reg_shift;
+	unsigned int pos = offset & 7;
+	u8 value;
+	int err;
+
+	mutex_lock(&adnp->i2c_lock);
+
+	err = adnp_read(adnp, GPIO_DDR(adnp) + reg, &value);
+	if (err < 0)
+		goto out;
+
+	value &= ~BIT(pos);
+
+	err = adnp_write(adnp, GPIO_DDR(adnp) + reg, value);
+	if (err < 0)
+		goto out;
+
+	err = adnp_read(adnp, GPIO_DDR(adnp) + reg, &value);
+	if (err < 0)
+		goto out;
+
+	if (value & BIT(pos)) {
+		err = -EPERM;
+		goto out;
+	}
+
+	err = 0;
+
+out:
+	mutex_unlock(&adnp->i2c_lock);
+	return err;
+}
+
+static int adnp_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+				      int value)
+{
+	struct adnp *adnp = gpiochip_get_data(chip);
+	unsigned int reg = offset >> adnp->reg_shift;
+	unsigned int pos = offset & 7;
+	int err;
+	u8 val;
+
+	mutex_lock(&adnp->i2c_lock);
+
+	err = adnp_read(adnp, GPIO_DDR(adnp) + reg, &val);
+	if (err < 0)
+		goto out;
+
+	val |= BIT(pos);
+
+	err = adnp_write(adnp, GPIO_DDR(adnp) + reg, val);
+	if (err < 0)
+		goto out;
+
+	err = adnp_read(adnp, GPIO_DDR(adnp) + reg, &val);
+	if (err < 0)
+		goto out;
+
+	if (!(val & BIT(pos))) {
+		err = -EPERM;
+		goto out;
+	}
+
+	__adnp_gpio_set(adnp, offset, value);
+	err = 0;
+
+out:
+	mutex_unlock(&adnp->i2c_lock);
+	return err;
+}
+
+static void adnp_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	struct adnp *adnp = gpiochip_get_data(chip);
+	unsigned int num_regs = 1 << adnp->reg_shift, i, j;
+	int err;
+
+	for (i = 0; i < num_regs; i++) {
+		u8 ddr, plr, ier, isr;
+
+		mutex_lock(&adnp->i2c_lock);
+
+		err = adnp_read(adnp, GPIO_DDR(adnp) + i, &ddr);
+		if (err < 0)
+			goto unlock;
+
+		err = adnp_read(adnp, GPIO_PLR(adnp) + i, &plr);
+		if (err < 0)
+			goto unlock;
+
+		err = adnp_read(adnp, GPIO_IER(adnp) + i, &ier);
+		if (err < 0)
+			goto unlock;
+
+		err = adnp_read(adnp, GPIO_ISR(adnp) + i, &isr);
+		if (err < 0)
+			goto unlock;
+
+		mutex_unlock(&adnp->i2c_lock);
+
+		for (j = 0; j < 8; j++) {
+			unsigned int bit = (i << adnp->reg_shift) + j;
+			const char *direction = "input ";
+			const char *level = "low ";
+			const char *interrupt = "disabled";
+			const char *pending = "";
+
+			if (ddr & BIT(j))
+				direction = "output";
+
+			if (plr & BIT(j))
+				level = "high";
+
+			if (ier & BIT(j))
+				interrupt = "enabled ";
+
+			if (isr & BIT(j))
+				pending = "pending";
+
+			seq_printf(s, "%2u: %s %s IRQ %s %s\n", bit,
+				   direction, level, interrupt, pending);
+		}
+	}
+
+	return;
+
+unlock:
+	mutex_unlock(&adnp->i2c_lock);
+}
+
+static irqreturn_t adnp_irq(int irq, void *data)
+{
+	struct adnp *adnp = data;
+	unsigned int num_regs, i;
+
+	num_regs = 1 << adnp->reg_shift;
+
+	for (i = 0; i < num_regs; i++) {
+		unsigned int base = i << adnp->reg_shift, bit;
+		u8 changed, level, isr, ier;
+		unsigned long pending;
+		int err;
+
+		mutex_lock(&adnp->i2c_lock);
+
+		err = adnp_read(adnp, GPIO_PLR(adnp) + i, &level);
+		if (err < 0) {
+			mutex_unlock(&adnp->i2c_lock);
+			continue;
+		}
+
+		err = adnp_read(adnp, GPIO_ISR(adnp) + i, &isr);
+		if (err < 0) {
+			mutex_unlock(&adnp->i2c_lock);
+			continue;
+		}
+
+		err = adnp_read(adnp, GPIO_IER(adnp) + i, &ier);
+		if (err < 0) {
+			mutex_unlock(&adnp->i2c_lock);
+			continue;
+		}
+
+		mutex_unlock(&adnp->i2c_lock);
+
+		/* determine pins that changed levels */
+		changed = level ^ adnp->irq_level[i];
+
+		/* compute edge-triggered interrupts */
+		pending = changed & ((adnp->irq_fall[i] & ~level) |
+				     (adnp->irq_rise[i] & level));
+
+		/* add in level-triggered interrupts */
+		pending |= (adnp->irq_high[i] & level) |
+			   (adnp->irq_low[i] & ~level);
+
+		/* mask out non-pending and disabled interrupts */
+		pending &= isr & ier;
+
+		for_each_set_bit(bit, &pending, 8) {
+			unsigned int child_irq;
+			child_irq = irq_find_mapping(adnp->gpio.irq.domain,
+						     base + bit);
+			handle_nested_irq(child_irq);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void adnp_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct adnp *adnp = gpiochip_get_data(gc);
+	unsigned int reg = d->hwirq >> adnp->reg_shift;
+	unsigned int pos = d->hwirq & 7;
+
+	adnp->irq_enable[reg] &= ~BIT(pos);
+}
+
+static void adnp_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct adnp *adnp = gpiochip_get_data(gc);
+	unsigned int reg = d->hwirq >> adnp->reg_shift;
+	unsigned int pos = d->hwirq & 7;
+
+	adnp->irq_enable[reg] |= BIT(pos);
+}
+
+static int adnp_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct adnp *adnp = gpiochip_get_data(gc);
+	unsigned int reg = d->hwirq >> adnp->reg_shift;
+	unsigned int pos = d->hwirq & 7;
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		adnp->irq_rise[reg] |= BIT(pos);
+	else
+		adnp->irq_rise[reg] &= ~BIT(pos);
+
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		adnp->irq_fall[reg] |= BIT(pos);
+	else
+		adnp->irq_fall[reg] &= ~BIT(pos);
+
+	if (type & IRQ_TYPE_LEVEL_HIGH)
+		adnp->irq_high[reg] |= BIT(pos);
+	else
+		adnp->irq_high[reg] &= ~BIT(pos);
+
+	if (type & IRQ_TYPE_LEVEL_LOW)
+		adnp->irq_low[reg] |= BIT(pos);
+	else
+		adnp->irq_low[reg] &= ~BIT(pos);
+
+	return 0;
+}
+
+static void adnp_irq_bus_lock(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct adnp *adnp = gpiochip_get_data(gc);
+
+	mutex_lock(&adnp->irq_lock);
+}
+
+static void adnp_irq_bus_unlock(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct adnp *adnp = gpiochip_get_data(gc);
+	unsigned int num_regs = 1 << adnp->reg_shift, i;
+
+	mutex_lock(&adnp->i2c_lock);
+
+	for (i = 0; i < num_regs; i++)
+		adnp_write(adnp, GPIO_IER(adnp) + i, adnp->irq_enable[i]);
+
+	mutex_unlock(&adnp->i2c_lock);
+	mutex_unlock(&adnp->irq_lock);
+}
+
+static struct irq_chip adnp_irq_chip = {
+	.name = "gpio-adnp",
+	.irq_mask = adnp_irq_mask,
+	.irq_unmask = adnp_irq_unmask,
+	.irq_set_type = adnp_irq_set_type,
+	.irq_bus_lock = adnp_irq_bus_lock,
+	.irq_bus_sync_unlock = adnp_irq_bus_unlock,
+};
+
+static int adnp_irq_setup(struct adnp *adnp)
+{
+	unsigned int num_regs = 1 << adnp->reg_shift, i;
+	struct gpio_chip *chip = &adnp->gpio;
+	int err;
+
+	mutex_init(&adnp->irq_lock);
+
+	/*
+	 * Allocate memory to keep track of the current level and trigger
+	 * modes of the interrupts. To avoid multiple allocations, a single
+	 * large buffer is allocated and pointers are setup to point at the
+	 * corresponding offsets. For consistency, the layout of the buffer
+	 * is chosen to match the register layout of the hardware in that
+	 * each segment contains the corresponding bits for all interrupts.
+	 */
+	adnp->irq_enable = devm_kcalloc(chip->parent, num_regs, 6,
+					GFP_KERNEL);
+	if (!adnp->irq_enable)
+		return -ENOMEM;
+
+	adnp->irq_level = adnp->irq_enable + (num_regs * 1);
+	adnp->irq_rise = adnp->irq_enable + (num_regs * 2);
+	adnp->irq_fall = adnp->irq_enable + (num_regs * 3);
+	adnp->irq_high = adnp->irq_enable + (num_regs * 4);
+	adnp->irq_low = adnp->irq_enable + (num_regs * 5);
+
+	for (i = 0; i < num_regs; i++) {
+		/*
+		 * Read the initial level of all pins to allow the emulation
+		 * of edge triggered interrupts.
+		 */
+		err = adnp_read(adnp, GPIO_PLR(adnp) + i, &adnp->irq_level[i]);
+		if (err < 0)
+			return err;
+
+		/* disable all interrupts */
+		err = adnp_write(adnp, GPIO_IER(adnp) + i, 0);
+		if (err < 0)
+			return err;
+
+		adnp->irq_enable[i] = 0x00;
+	}
+
+	err = devm_request_threaded_irq(chip->parent, adnp->client->irq,
+					NULL, adnp_irq,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					dev_name(chip->parent), adnp);
+	if (err != 0) {
+		dev_err(chip->parent, "can't request IRQ#%d: %d\n",
+			adnp->client->irq, err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int adnp_gpio_setup(struct adnp *adnp, unsigned int num_gpios,
+			   bool is_irq_controller)
+{
+	struct gpio_chip *chip = &adnp->gpio;
+	int err;
+
+	adnp->reg_shift = get_count_order(num_gpios) - 3;
+
+	chip->direction_input = adnp_gpio_direction_input;
+	chip->direction_output = adnp_gpio_direction_output;
+	chip->get = adnp_gpio_get;
+	chip->set = adnp_gpio_set;
+	chip->can_sleep = true;
+
+	if (IS_ENABLED(CONFIG_DEBUG_FS))
+		chip->dbg_show = adnp_gpio_dbg_show;
+
+	chip->base = -1;
+	chip->ngpio = num_gpios;
+	chip->label = adnp->client->name;
+	chip->parent = &adnp->client->dev;
+	chip->owner = THIS_MODULE;
+
+	if (is_irq_controller) {
+		struct gpio_irq_chip *girq;
+
+		err = adnp_irq_setup(adnp);
+		if (err)
+			return err;
+
+		girq = &chip->irq;
+		girq->chip = &adnp_irq_chip;
+		/* This will let us handle the parent IRQ in the driver */
+		girq->parent_handler = NULL;
+		girq->num_parents = 0;
+		girq->parents = NULL;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_simple_irq;
+		girq->threaded = true;
+	}
+
+	err = devm_gpiochip_add_data(&adnp->client->dev, chip, adnp);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int adnp_i2c_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct adnp *adnp;
+	u32 num_gpios;
+	int err;
+
+	err = device_property_read_u32(dev, "nr-gpios", &num_gpios);
+	if (err < 0)
+		return err;
+
+	adnp = devm_kzalloc(&client->dev, sizeof(*adnp), GFP_KERNEL);
+	if (!adnp)
+		return -ENOMEM;
+
+	mutex_init(&adnp->i2c_lock);
+	adnp->client = client;
+
+	err = adnp_gpio_setup(adnp, num_gpios, device_property_read_bool(dev, "interrupt-controller"));
+	if (err)
+		return err;
+
+	i2c_set_clientdata(client, adnp);
+
+	return 0;
+}
+
+static const struct i2c_device_id adnp_i2c_id[] = {
+	{ "gpio-adnp" },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, adnp_i2c_id);
+
+static const struct of_device_id adnp_of_match[] = {
+	{ .compatible = "ad,gpio-adnp", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, adnp_of_match);
+
+static struct i2c_driver adnp_i2c_driver = {
+	.driver = {
+		.name = "gpio-adnp",
+		.of_match_table = adnp_of_match,
+	},
+	.probe_new = adnp_i2c_probe,
+	.id_table = adnp_i2c_id,
+};
+module_i2c_driver(adnp_i2c_driver);
+
+MODULE_DESCRIPTION("Avionic Design N-bit GPIO expander");
+MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
+MODULE_LICENSE("GPL");