Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

2 files changed, 527 insertions, 0 deletions

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c
new file mode 100644
index 000000000..26feefbb8
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c
@@ -0,0 +1,468 @@
+/*
+ * Copyright 2012-16 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+
+#include "dccg.h"
+#include "clk_mgr_internal.h"
+#include "dce_clk_mgr.h"
+#include "dce110/dce110_clk_mgr.h"
+#include "dce112/dce112_clk_mgr.h"
+#include "reg_helper.h"
+#include "dmcu.h"
+#include "core_types.h"
+#include "dal_asic_id.h"
+
+/*
+ * Currently the register shifts and masks in this file are used for dce100 and dce80
+ * which has identical definitions.
+ * TODO: remove this when DPREFCLK_CNTL and dpref DENTIST_DISPCLK_CNTL
+ * is moved to dccg, where it belongs
+ */
+#include "dce/dce_8_0_d.h"
+#include "dce/dce_8_0_sh_mask.h"
+
+#define REG(reg) \
+	(clk_mgr->regs->reg)
+
+#undef FN
+#define FN(reg_name, field_name) \
+	clk_mgr->clk_mgr_shift->field_name, clk_mgr->clk_mgr_mask->field_name
+
+static const struct clk_mgr_registers disp_clk_regs = {
+		CLK_COMMON_REG_LIST_DCE_BASE()
+};
+
+static const struct clk_mgr_shift disp_clk_shift = {
+		CLK_COMMON_MASK_SH_LIST_DCE_COMMON_BASE(__SHIFT)
+};
+
+static const struct clk_mgr_mask disp_clk_mask = {
+		CLK_COMMON_MASK_SH_LIST_DCE_COMMON_BASE(_MASK)
+};
+
+
+/* Max clock values for each state indexed by "enum clocks_state": */
+static const struct state_dependent_clocks dce80_max_clks_by_state[] = {
+/* ClocksStateInvalid - should not be used */
+{ .display_clk_khz = 0, .pixel_clk_khz = 0 },
+/* ClocksStateUltraLow - not expected to be used for DCE 8.0 */
+{ .display_clk_khz = 0, .pixel_clk_khz = 0 },
+/* ClocksStateLow */
+{ .display_clk_khz = 352000, .pixel_clk_khz = 330000},
+/* ClocksStateNominal */
+{ .display_clk_khz = 600000, .pixel_clk_khz = 400000 },
+/* ClocksStatePerformance */
+{ .display_clk_khz = 600000, .pixel_clk_khz = 400000 } };
+
+int dentist_get_divider_from_did(int did)
+{
+	if (did < DENTIST_BASE_DID_1)
+		did = DENTIST_BASE_DID_1;
+	if (did > DENTIST_MAX_DID)
+		did = DENTIST_MAX_DID;
+
+	if (did < DENTIST_BASE_DID_2) {
+		return DENTIST_DIVIDER_RANGE_1_START + DENTIST_DIVIDER_RANGE_1_STEP
+							* (did - DENTIST_BASE_DID_1);
+	} else if (did < DENTIST_BASE_DID_3) {
+		return DENTIST_DIVIDER_RANGE_2_START + DENTIST_DIVIDER_RANGE_2_STEP
+							* (did - DENTIST_BASE_DID_2);
+	} else if (did < DENTIST_BASE_DID_4) {
+		return DENTIST_DIVIDER_RANGE_3_START + DENTIST_DIVIDER_RANGE_3_STEP
+							* (did - DENTIST_BASE_DID_3);
+	} else {
+		return DENTIST_DIVIDER_RANGE_4_START + DENTIST_DIVIDER_RANGE_4_STEP
+							* (did - DENTIST_BASE_DID_4);
+	}
+}
+
+/* SW will adjust DP REF Clock average value for all purposes
+ * (DP DTO / DP Audio DTO and DP GTC)
+ if clock is spread for all cases:
+ -if SS enabled on DP Ref clock and HW de-spreading enabled with SW
+ calculations for DS_INCR/DS_MODULO (this is planned to be default case)
+ -if SS enabled on DP Ref clock and HW de-spreading enabled with HW
+ calculations (not planned to be used, but average clock should still
+ be valid)
+ -if SS enabled on DP Ref clock and HW de-spreading disabled
+ (should not be case with CIK) then SW should program all rates
+ generated according to average value (case as with previous ASICs)
+  */
+
+int dce_adjust_dp_ref_freq_for_ss(struct clk_mgr_internal *clk_mgr_dce, int dp_ref_clk_khz)
+{
+	if (clk_mgr_dce->ss_on_dprefclk && clk_mgr_dce->dprefclk_ss_divider != 0) {
+		struct fixed31_32 ss_percentage = dc_fixpt_div_int(
+				dc_fixpt_from_fraction(clk_mgr_dce->dprefclk_ss_percentage,
+							clk_mgr_dce->dprefclk_ss_divider), 200);
+		struct fixed31_32 adj_dp_ref_clk_khz;
+
+		ss_percentage = dc_fixpt_sub(dc_fixpt_one, ss_percentage);
+		adj_dp_ref_clk_khz = dc_fixpt_mul_int(ss_percentage, dp_ref_clk_khz);
+		dp_ref_clk_khz = dc_fixpt_floor(adj_dp_ref_clk_khz);
+	}
+	return dp_ref_clk_khz;
+}
+
+int dce_get_dp_ref_freq_khz(struct clk_mgr *clk_mgr_base)
+{
+	struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
+	int dprefclk_wdivider;
+	int dprefclk_src_sel;
+	int dp_ref_clk_khz;
+	int target_div;
+
+	/* ASSERT DP Reference Clock source is from DFS*/
+	REG_GET(DPREFCLK_CNTL, DPREFCLK_SRC_SEL, &dprefclk_src_sel);
+	ASSERT(dprefclk_src_sel == 0);
+
+	/* Read the mmDENTIST_DISPCLK_CNTL to get the currently
+	 * programmed DID DENTIST_DPREFCLK_WDIVIDER*/
+	REG_GET(DENTIST_DISPCLK_CNTL, DENTIST_DPREFCLK_WDIVIDER, &dprefclk_wdivider);
+
+	/* Convert DENTIST_DPREFCLK_WDIVIDERto actual divider*/
+	target_div = dentist_get_divider_from_did(dprefclk_wdivider);
+
+	/* Calculate the current DFS clock, in kHz.*/
+	dp_ref_clk_khz = (DENTIST_DIVIDER_RANGE_SCALE_FACTOR
+		* clk_mgr->base.dentist_vco_freq_khz) / target_div;
+
+	return dce_adjust_dp_ref_freq_for_ss(clk_mgr, dp_ref_clk_khz);
+}
+
+int dce12_get_dp_ref_freq_khz(struct clk_mgr *clk_mgr_base)
+{
+	struct clk_mgr_internal *clk_mgr_dce = TO_CLK_MGR_INTERNAL(clk_mgr_base);
+
+	return dce_adjust_dp_ref_freq_for_ss(clk_mgr_dce, clk_mgr_base->dprefclk_khz);
+}
+
+/* unit: in_khz before mode set, get pixel clock from context. ASIC register
+ * may not be programmed yet
+ */
+uint32_t dce_get_max_pixel_clock_for_all_paths(struct dc_state *context)
+{
+	uint32_t max_pix_clk = 0;
+	int i;
+
+	for (i = 0; i < MAX_PIPES; i++) {
+		struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
+
+		if (pipe_ctx->stream == NULL)
+			continue;
+
+		/* do not check under lay */
+		if (pipe_ctx->top_pipe)
+			continue;
+
+		if (pipe_ctx->stream_res.pix_clk_params.requested_pix_clk_100hz / 10 > max_pix_clk)
+			max_pix_clk = pipe_ctx->stream_res.pix_clk_params.requested_pix_clk_100hz / 10;
+
+		/* raise clock state for HBR3/2 if required. Confirmed with HW DCE/DPCS
+		 * logic for HBR3 still needs Nominal (0.8V) on VDDC rail
+		 */
+		if (dc_is_dp_signal(pipe_ctx->stream->signal) &&
+				pipe_ctx->stream_res.pix_clk_params.requested_sym_clk > max_pix_clk)
+			max_pix_clk = pipe_ctx->stream_res.pix_clk_params.requested_sym_clk;
+	}
+
+	return max_pix_clk;
+}
+
+enum dm_pp_clocks_state dce_get_required_clocks_state(
+	struct clk_mgr *clk_mgr_base,
+	struct dc_state *context)
+{
+	struct clk_mgr_internal *clk_mgr_dce = TO_CLK_MGR_INTERNAL(clk_mgr_base);
+	int i;
+	enum dm_pp_clocks_state low_req_clk;
+	int max_pix_clk = dce_get_max_pixel_clock_for_all_paths(context);
+
+	/* Iterate from highest supported to lowest valid state, and update
+	 * lowest RequiredState with the lowest state that satisfies
+	 * all required clocks
+	 */
+	for (i = clk_mgr_dce->max_clks_state; i >= DM_PP_CLOCKS_STATE_ULTRA_LOW; i--)
+		if (context->bw_ctx.bw.dce.dispclk_khz >
+				clk_mgr_dce->max_clks_by_state[i].display_clk_khz
+			|| max_pix_clk >
+				clk_mgr_dce->max_clks_by_state[i].pixel_clk_khz)
+			break;
+
+	low_req_clk = i + 1;
+	if (low_req_clk > clk_mgr_dce->max_clks_state) {
+		/* set max clock state for high phyclock, invalid on exceeding display clock */
+		if (clk_mgr_dce->max_clks_by_state[clk_mgr_dce->max_clks_state].display_clk_khz
+				< context->bw_ctx.bw.dce.dispclk_khz)
+			low_req_clk = DM_PP_CLOCKS_STATE_INVALID;
+		else
+			low_req_clk = clk_mgr_dce->max_clks_state;
+	}
+
+	return low_req_clk;
+}
+
+
+/* TODO: remove use the two broken down functions */
+int dce_set_clock(
+	struct clk_mgr *clk_mgr_base,
+	int requested_clk_khz)
+{
+	struct clk_mgr_internal *clk_mgr_dce = TO_CLK_MGR_INTERNAL(clk_mgr_base);
+	struct bp_pixel_clock_parameters pxl_clk_params = { 0 };
+	struct dc_bios *bp = clk_mgr_base->ctx->dc_bios;
+	int actual_clock = requested_clk_khz;
+	struct dmcu *dmcu = clk_mgr_dce->base.ctx->dc->res_pool->dmcu;
+
+	/* Make sure requested clock isn't lower than minimum threshold*/
+	if (requested_clk_khz > 0)
+		requested_clk_khz = max(requested_clk_khz,
+				clk_mgr_dce->base.dentist_vco_freq_khz / 64);
+
+	/* Prepare to program display clock*/
+	pxl_clk_params.target_pixel_clock_100hz = requested_clk_khz * 10;
+	pxl_clk_params.pll_id = CLOCK_SOURCE_ID_DFS;
+
+	if (clk_mgr_dce->dfs_bypass_active)
+		pxl_clk_params.flags.SET_DISPCLK_DFS_BYPASS = true;
+
+	bp->funcs->program_display_engine_pll(bp, &pxl_clk_params);
+
+	if (clk_mgr_dce->dfs_bypass_active) {
+		/* Cache the fixed display clock*/
+		clk_mgr_dce->dfs_bypass_disp_clk =
+			pxl_clk_params.dfs_bypass_display_clock;
+		actual_clock = pxl_clk_params.dfs_bypass_display_clock;
+	}
+
+	/* from power down, we need mark the clock state as ClocksStateNominal
+	 * from HWReset, so when resume we will call pplib voltage regulator.*/
+	if (requested_clk_khz == 0)
+		clk_mgr_dce->cur_min_clks_state = DM_PP_CLOCKS_STATE_NOMINAL;
+
+	if (dmcu && dmcu->funcs->is_dmcu_initialized(dmcu))
+		dmcu->funcs->set_psr_wait_loop(dmcu, actual_clock / 1000 / 7);
+
+	return actual_clock;
+}
+
+
+static void dce_clock_read_integrated_info(struct clk_mgr_internal *clk_mgr_dce)
+{
+	struct dc_debug_options *debug = &clk_mgr_dce->base.ctx->dc->debug;
+	struct dc_bios *bp = clk_mgr_dce->base.ctx->dc_bios;
+	int i;
+
+	if (bp->integrated_info)
+		clk_mgr_dce->base.dentist_vco_freq_khz = bp->integrated_info->dentist_vco_freq;
+	if (clk_mgr_dce->base.dentist_vco_freq_khz == 0) {
+		clk_mgr_dce->base.dentist_vco_freq_khz = bp->fw_info.smu_gpu_pll_output_freq;
+		if (clk_mgr_dce->base.dentist_vco_freq_khz == 0)
+			clk_mgr_dce->base.dentist_vco_freq_khz = 3600000;
+	}
+
+	/*update the maximum display clock for each power state*/
+	for (i = 0; i < NUMBER_OF_DISP_CLK_VOLTAGE; ++i) {
+		enum dm_pp_clocks_state clk_state = DM_PP_CLOCKS_STATE_INVALID;
+
+		switch (i) {
+		case 0:
+			clk_state = DM_PP_CLOCKS_STATE_ULTRA_LOW;
+			break;
+
+		case 1:
+			clk_state = DM_PP_CLOCKS_STATE_LOW;
+			break;
+
+		case 2:
+			clk_state = DM_PP_CLOCKS_STATE_NOMINAL;
+			break;
+
+		case 3:
+			clk_state = DM_PP_CLOCKS_STATE_PERFORMANCE;
+			break;
+
+		default:
+			clk_state = DM_PP_CLOCKS_STATE_INVALID;
+			break;
+		}
+
+		/*Do not allow bad VBIOS/SBIOS to override with invalid values,
+		 * check for > 100MHz*/
+		if (bp->integrated_info)
+			if (bp->integrated_info->disp_clk_voltage[i].max_supported_clk >= 100000)
+				clk_mgr_dce->max_clks_by_state[clk_state].display_clk_khz =
+					bp->integrated_info->disp_clk_voltage[i].max_supported_clk;
+	}
+
+	if (!debug->disable_dfs_bypass && bp->integrated_info)
+		if (bp->integrated_info->gpu_cap_info & DFS_BYPASS_ENABLE)
+			clk_mgr_dce->dfs_bypass_enabled = true;
+}
+
+void dce_clock_read_ss_info(struct clk_mgr_internal *clk_mgr_dce)
+{
+	struct dc_bios *bp = clk_mgr_dce->base.ctx->dc_bios;
+	int ss_info_num = bp->funcs->get_ss_entry_number(
+			bp, AS_SIGNAL_TYPE_GPU_PLL);
+
+	if (ss_info_num) {
+		struct spread_spectrum_info info = { { 0 } };
+		enum bp_result result = bp->funcs->get_spread_spectrum_info(
+				bp, AS_SIGNAL_TYPE_GPU_PLL, 0, &info);
+
+		/* Based on VBIOS, VBIOS will keep entry for GPU PLL SS
+		 * even if SS not enabled and in that case
+		 * SSInfo.spreadSpectrumPercentage !=0 would be sign
+		 * that SS is enabled
+		 */
+		if (result == BP_RESULT_OK &&
+				info.spread_spectrum_percentage != 0) {
+			clk_mgr_dce->ss_on_dprefclk = true;
+			clk_mgr_dce->dprefclk_ss_divider = info.spread_percentage_divider;
+
+			if (info.type.CENTER_MODE == 0) {
+				/* TODO: Currently for DP Reference clock we
+				 * need only SS percentage for
+				 * downspread */
+				clk_mgr_dce->dprefclk_ss_percentage =
+						info.spread_spectrum_percentage;
+			}
+
+			return;
+		}
+
+		result = bp->funcs->get_spread_spectrum_info(
+				bp, AS_SIGNAL_TYPE_DISPLAY_PORT, 0, &info);
+
+		/* Based on VBIOS, VBIOS will keep entry for DPREFCLK SS
+		 * even if SS not enabled and in that case
+		 * SSInfo.spreadSpectrumPercentage !=0 would be sign
+		 * that SS is enabled
+		 */
+		if (result == BP_RESULT_OK &&
+				info.spread_spectrum_percentage != 0) {
+			clk_mgr_dce->ss_on_dprefclk = true;
+			clk_mgr_dce->dprefclk_ss_divider = info.spread_percentage_divider;
+
+			if (info.type.CENTER_MODE == 0) {
+				/* Currently for DP Reference clock we
+				 * need only SS percentage for
+				 * downspread */
+				clk_mgr_dce->dprefclk_ss_percentage =
+						info.spread_spectrum_percentage;
+			}
+			if (clk_mgr_dce->base.ctx->dc->config.ignore_dpref_ss)
+				clk_mgr_dce->dprefclk_ss_percentage = 0;
+		}
+	}
+}
+
+static void dce_pplib_apply_display_requirements(
+	struct dc *dc,
+	struct dc_state *context)
+{
+	struct dm_pp_display_configuration *pp_display_cfg = &context->pp_display_cfg;
+
+	pp_display_cfg->avail_mclk_switch_time_us = dce110_get_min_vblank_time_us(context);
+
+	dce110_fill_display_configs(context, pp_display_cfg);
+
+	if (memcmp(&dc->current_state->pp_display_cfg, pp_display_cfg, sizeof(*pp_display_cfg)) !=  0)
+		dm_pp_apply_display_requirements(dc->ctx, pp_display_cfg);
+}
+
+static void dce_update_clocks(struct clk_mgr *clk_mgr_base,
+			struct dc_state *context,
+			bool safe_to_lower)
+{
+	struct clk_mgr_internal *clk_mgr_dce = TO_CLK_MGR_INTERNAL(clk_mgr_base);
+	struct dm_pp_power_level_change_request level_change_req;
+	int patched_disp_clk = context->bw_ctx.bw.dce.dispclk_khz;
+
+	/*TODO: W/A for dal3 linux, investigate why this works */
+	if (!clk_mgr_dce->dfs_bypass_active)
+		patched_disp_clk = patched_disp_clk * 115 / 100;
+
+	level_change_req.power_level = dce_get_required_clocks_state(clk_mgr_base, context);
+	/* get max clock state from PPLIB */
+	if ((level_change_req.power_level < clk_mgr_dce->cur_min_clks_state && safe_to_lower)
+			|| level_change_req.power_level > clk_mgr_dce->cur_min_clks_state) {
+		if (dm_pp_apply_power_level_change_request(clk_mgr_base->ctx, &level_change_req))
+			clk_mgr_dce->cur_min_clks_state = level_change_req.power_level;
+	}
+
+	if (should_set_clock(safe_to_lower, patched_disp_clk, clk_mgr_base->clks.dispclk_khz)) {
+		patched_disp_clk = dce_set_clock(clk_mgr_base, patched_disp_clk);
+		clk_mgr_base->clks.dispclk_khz = patched_disp_clk;
+	}
+	dce_pplib_apply_display_requirements(clk_mgr_base->ctx->dc, context);
+}
+
+
+
+
+
+
+
+
+static struct clk_mgr_funcs dce_funcs = {
+	.get_dp_ref_clk_frequency = dce_get_dp_ref_freq_khz,
+	.update_clocks = dce_update_clocks
+};
+
+void dce_clk_mgr_construct(
+		struct dc_context *ctx,
+		struct clk_mgr_internal *clk_mgr)
+{
+	struct clk_mgr *base = &clk_mgr->base;
+	struct dm_pp_static_clock_info static_clk_info = {0};
+
+	memcpy(clk_mgr->max_clks_by_state,
+		dce80_max_clks_by_state,
+		sizeof(dce80_max_clks_by_state));
+
+	base->ctx = ctx;
+	base->funcs = &dce_funcs;
+
+	clk_mgr->regs = &disp_clk_regs;
+	clk_mgr->clk_mgr_shift = &disp_clk_shift;
+	clk_mgr->clk_mgr_mask = &disp_clk_mask;
+	clk_mgr->dfs_bypass_disp_clk = 0;
+
+	clk_mgr->dprefclk_ss_percentage = 0;
+	clk_mgr->dprefclk_ss_divider = 1000;
+	clk_mgr->ss_on_dprefclk = false;
+
+	if (dm_pp_get_static_clocks(ctx, &static_clk_info))
+		clk_mgr->max_clks_state = static_clk_info.max_clocks_state;
+	else
+		clk_mgr->max_clks_state = DM_PP_CLOCKS_STATE_NOMINAL;
+	clk_mgr->cur_min_clks_state = DM_PP_CLOCKS_STATE_INVALID;
+
+	dce_clock_read_integrated_info(clk_mgr);
+	dce_clock_read_ss_info(clk_mgr);
+}
+
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.h b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.h
new file mode 100644
index 000000000..f6622f58f
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2012-16 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+
+#ifndef _DCE_CLK_MGR_H_
+#define _DCE_CLK_MGR_H_
+
+#include "dc.h"
+
+/* functions shared by other dce clk mgrs */
+int dce_adjust_dp_ref_freq_for_ss(struct clk_mgr_internal *clk_mgr_dce, int dp_ref_clk_khz);
+int dce_get_dp_ref_freq_khz(struct clk_mgr *clk_mgr_base);
+enum dm_pp_clocks_state dce_get_required_clocks_state(
+	struct clk_mgr *clk_mgr_base,
+	struct dc_state *context);
+
+uint32_t dce_get_max_pixel_clock_for_all_paths(struct dc_state *context);
+
+
+void dce_clk_mgr_construct(
+		struct dc_context *ctx,
+		struct clk_mgr_internal *clk_mgr_dce);
+
+void dce_clock_read_ss_info(struct clk_mgr_internal *dccg_dce);
+
+int dce12_get_dp_ref_freq_khz(struct clk_mgr *dccg);
+
+int dce_set_clock(
+	struct clk_mgr *clk_mgr_base,
+	int requested_clk_khz);
+
+
+void dce_clk_mgr_destroy(struct clk_mgr **clk_mgr);
+
+int dentist_get_divider_from_did(int did);
+
+#endif /* _DCE_CLK_MGR_H_ */