Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

8 files changed, 758 insertions, 0 deletions

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr.c
new file mode 100644
index 000000000..60761ff3c
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr.c
@@ -0,0 +1,351 @@
+/*
+ * Copyright 2018 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#include <linux/slab.h>
+
+#include "reg_helper.h"
+#include "core_types.h"
+#include "clk_mgr_internal.h"
+#include "rv1_clk_mgr.h"
+#include "dce100/dce_clk_mgr.h"
+#include "dce112/dce112_clk_mgr.h"
+#include "rv1_clk_mgr_vbios_smu.h"
+#include "rv1_clk_mgr_clk.h"
+
+static void rv1_init_clocks(struct clk_mgr *clk_mgr)
+{
+	memset(&(clk_mgr->clks), 0, sizeof(struct dc_clocks));
+}
+
+static int rv1_determine_dppclk_threshold(struct clk_mgr_internal *clk_mgr, struct dc_clocks *new_clocks)
+{
+	bool request_dpp_div = new_clocks->dispclk_khz > new_clocks->dppclk_khz;
+	bool dispclk_increase = new_clocks->dispclk_khz > clk_mgr->base.clks.dispclk_khz;
+	int disp_clk_threshold = new_clocks->max_supported_dppclk_khz;
+	bool cur_dpp_div = clk_mgr->base.clks.dispclk_khz > clk_mgr->base.clks.dppclk_khz;
+
+	/* increase clock, looking for div is 0 for current, request div is 1*/
+	if (dispclk_increase) {
+		/* already divided by 2, no need to reach target clk with 2 steps*/
+		if (cur_dpp_div)
+			return new_clocks->dispclk_khz;
+
+		/* request disp clk is lower than maximum supported dpp clk,
+		 * no need to reach target clk with two steps.
+		 */
+		if (new_clocks->dispclk_khz <= disp_clk_threshold)
+			return new_clocks->dispclk_khz;
+
+		/* target dpp clk not request divided by 2, still within threshold */
+		if (!request_dpp_div)
+			return new_clocks->dispclk_khz;
+
+	} else {
+		/* decrease clock, looking for current dppclk divided by 2,
+		 * request dppclk not divided by 2.
+		 */
+
+		/* current dpp clk not divided by 2, no need to ramp*/
+		if (!cur_dpp_div)
+			return new_clocks->dispclk_khz;
+
+		/* current disp clk is lower than current maximum dpp clk,
+		 * no need to ramp
+		 */
+		if (clk_mgr->base.clks.dispclk_khz <= disp_clk_threshold)
+			return new_clocks->dispclk_khz;
+
+		/* request dpp clk need to be divided by 2 */
+		if (request_dpp_div)
+			return new_clocks->dispclk_khz;
+	}
+
+	return disp_clk_threshold;
+}
+
+static void ramp_up_dispclk_with_dpp(
+		struct clk_mgr_internal *clk_mgr,
+		struct dc *dc,
+		struct dc_clocks *new_clocks,
+		bool safe_to_lower)
+{
+	int i;
+	int dispclk_to_dpp_threshold = rv1_determine_dppclk_threshold(clk_mgr, new_clocks);
+	bool request_dpp_div = new_clocks->dispclk_khz > new_clocks->dppclk_khz;
+
+	/* this function is to change dispclk, dppclk and dprefclk according to
+	 * bandwidth requirement. Its call stack is rv1_update_clocks -->
+	 * update_clocks --> dcn10_prepare_bandwidth / dcn10_optimize_bandwidth
+	 * --> prepare_bandwidth / optimize_bandwidth. before change dcn hw,
+	 * prepare_bandwidth will be called first to allow enough clock,
+	 * watermark for change, after end of dcn hw change, optimize_bandwidth
+	 * is executed to lower clock to save power for new dcn hw settings.
+	 *
+	 * below is sequence of commit_planes_for_stream:
+	 *
+	 * step 1: prepare_bandwidth - raise clock to have enough bandwidth
+	 * step 2: lock_doublebuffer_enable
+	 * step 3: pipe_control_lock(true) - make dchubp register change will
+	 * not take effect right way
+	 * step 4: apply_ctx_for_surface - program dchubp
+	 * step 5: pipe_control_lock(false) - dchubp register change take effect
+	 * step 6: optimize_bandwidth --> dc_post_update_surfaces_to_stream
+	 * for full_date, optimize clock to save power
+	 *
+	 * at end of step 1, dcn clocks (dprefclk, dispclk, dppclk) may be
+	 * changed for new dchubp configuration. but real dcn hub dchubps are
+	 * still running with old configuration until end of step 5. this need
+	 * clocks settings at step 1 should not less than that before step 1.
+	 * this is checked by two conditions: 1. if (should_set_clock(safe_to_lower
+	 * , new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) ||
+	 * new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz)
+	 * 2. request_dpp_div = new_clocks->dispclk_khz > new_clocks->dppclk_khz
+	 *
+	 * the second condition is based on new dchubp configuration. dppclk
+	 * for new dchubp may be different from dppclk before step 1.
+	 * for example, before step 1, dchubps are as below:
+	 * pipe 0: recout=(0,40,1920,980) viewport=(0,0,1920,979)
+	 * pipe 1: recout=(0,0,1920,1080) viewport=(0,0,1920,1080)
+	 * for dppclk for pipe0 need dppclk = dispclk
+	 *
+	 * new dchubp pipe split configuration:
+	 * pipe 0: recout=(0,0,960,1080) viewport=(0,0,960,1080)
+	 * pipe 1: recout=(960,0,960,1080) viewport=(960,0,960,1080)
+	 * dppclk only needs dppclk = dispclk /2.
+	 *
+	 * dispclk, dppclk are not lock by otg master lock. they take effect
+	 * after step 1. during this transition, dispclk are the same, but
+	 * dppclk is changed to half of previous clock for old dchubp
+	 * configuration between step 1 and step 6. This may cause p-state
+	 * warning intermittently.
+	 *
+	 * for new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz, we
+	 * need make sure dppclk are not changed to less between step 1 and 6.
+	 * for new_clocks->dispclk_khz > clk_mgr_base->clks.dispclk_khz,
+	 * new display clock is raised, but we do not know ratio of
+	 * new_clocks->dispclk_khz and clk_mgr_base->clks.dispclk_khz,
+	 * new_clocks->dispclk_khz /2 does not guarantee equal or higher than
+	 * old dppclk. we could ignore power saving different between
+	 * dppclk = displck and dppclk = dispclk / 2 between step 1 and step 6.
+	 * as long as safe_to_lower = false, set dpclk = dispclk to simplify
+	 * condition check.
+	 * todo: review this change for other asic.
+	 **/
+	if (!safe_to_lower)
+		request_dpp_div = false;
+
+	/* set disp clk to dpp clk threshold */
+
+	clk_mgr->funcs->set_dispclk(clk_mgr, dispclk_to_dpp_threshold);
+	clk_mgr->funcs->set_dprefclk(clk_mgr);
+
+
+	/* update request dpp clk division option */
+	for (i = 0; i < dc->res_pool->pipe_count; i++) {
+		struct pipe_ctx *pipe_ctx = &dc->current_state->res_ctx.pipe_ctx[i];
+
+		if (!pipe_ctx->plane_state)
+			continue;
+
+		pipe_ctx->plane_res.dpp->funcs->dpp_dppclk_control(
+				pipe_ctx->plane_res.dpp,
+				request_dpp_div,
+				true);
+	}
+
+	/* If target clk not same as dppclk threshold, set to target clock */
+	if (dispclk_to_dpp_threshold != new_clocks->dispclk_khz) {
+		clk_mgr->funcs->set_dispclk(clk_mgr, new_clocks->dispclk_khz);
+		clk_mgr->funcs->set_dprefclk(clk_mgr);
+	}
+
+
+	clk_mgr->base.clks.dispclk_khz = new_clocks->dispclk_khz;
+	clk_mgr->base.clks.dppclk_khz = new_clocks->dppclk_khz;
+	clk_mgr->base.clks.max_supported_dppclk_khz = new_clocks->max_supported_dppclk_khz;
+}
+
+static void rv1_update_clocks(struct clk_mgr *clk_mgr_base,
+			struct dc_state *context,
+			bool safe_to_lower)
+{
+	struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
+	struct dc *dc = clk_mgr_base->ctx->dc;
+	struct dc_debug_options *debug = &dc->debug;
+	struct dc_clocks *new_clocks = &context->bw_ctx.bw.dcn.clk;
+	struct pp_smu_funcs_rv *pp_smu = NULL;
+	bool send_request_to_increase = false;
+	bool send_request_to_lower = false;
+	int display_count;
+
+	bool enter_display_off = false;
+
+	ASSERT(clk_mgr->pp_smu);
+
+	if (dc->work_arounds.skip_clock_update)
+		return;
+
+	pp_smu = &clk_mgr->pp_smu->rv_funcs;
+
+	display_count = clk_mgr_helper_get_active_display_cnt(dc, context);
+
+	if (display_count == 0)
+		enter_display_off = true;
+
+	if (enter_display_off == safe_to_lower) {
+		/*
+		 * Notify SMU active displays
+		 * if function pointer not set up, this message is
+		 * sent as part of pplib_apply_display_requirements.
+		 */
+		if (pp_smu->set_display_count)
+			pp_smu->set_display_count(&pp_smu->pp_smu, display_count);
+	}
+
+	if (new_clocks->dispclk_khz > clk_mgr_base->clks.dispclk_khz
+			|| new_clocks->phyclk_khz > clk_mgr_base->clks.phyclk_khz
+			|| new_clocks->fclk_khz > clk_mgr_base->clks.fclk_khz
+			|| new_clocks->dcfclk_khz > clk_mgr_base->clks.dcfclk_khz)
+		send_request_to_increase = true;
+
+	if (should_set_clock(safe_to_lower, new_clocks->phyclk_khz, clk_mgr_base->clks.phyclk_khz)) {
+		clk_mgr_base->clks.phyclk_khz = new_clocks->phyclk_khz;
+		send_request_to_lower = true;
+	}
+
+	// F Clock
+	if (debug->force_fclk_khz != 0)
+		new_clocks->fclk_khz = debug->force_fclk_khz;
+
+	if (should_set_clock(safe_to_lower, new_clocks->fclk_khz, clk_mgr_base->clks.fclk_khz)) {
+		clk_mgr_base->clks.fclk_khz = new_clocks->fclk_khz;
+		send_request_to_lower = true;
+	}
+
+	//DCF Clock
+	if (should_set_clock(safe_to_lower, new_clocks->dcfclk_khz, clk_mgr_base->clks.dcfclk_khz)) {
+		clk_mgr_base->clks.dcfclk_khz = new_clocks->dcfclk_khz;
+		send_request_to_lower = true;
+	}
+
+	if (should_set_clock(safe_to_lower,
+			new_clocks->dcfclk_deep_sleep_khz, clk_mgr_base->clks.dcfclk_deep_sleep_khz)) {
+		clk_mgr_base->clks.dcfclk_deep_sleep_khz = new_clocks->dcfclk_deep_sleep_khz;
+		send_request_to_lower = true;
+	}
+
+	/* make sure dcf clk is before dpp clk to
+	 * make sure we have enough voltage to run dpp clk
+	 */
+	if (send_request_to_increase) {
+		/*use dcfclk to request voltage*/
+		if (pp_smu->set_hard_min_fclk_by_freq &&
+				pp_smu->set_hard_min_dcfclk_by_freq &&
+				pp_smu->set_min_deep_sleep_dcfclk) {
+			pp_smu->set_hard_min_fclk_by_freq(&pp_smu->pp_smu, khz_to_mhz_ceil(new_clocks->fclk_khz));
+			pp_smu->set_hard_min_dcfclk_by_freq(&pp_smu->pp_smu, khz_to_mhz_ceil(new_clocks->dcfclk_khz));
+			pp_smu->set_min_deep_sleep_dcfclk(&pp_smu->pp_smu, khz_to_mhz_ceil(new_clocks->dcfclk_deep_sleep_khz));
+		}
+	}
+
+	/* dcn1 dppclk is tied to dispclk */
+	/* program dispclk on = as a w/a for sleep resume clock ramping issues */
+	if (should_set_clock(safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz)
+			|| new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz) {
+		ramp_up_dispclk_with_dpp(clk_mgr, dc, new_clocks, safe_to_lower);
+		clk_mgr_base->clks.dispclk_khz = new_clocks->dispclk_khz;
+		send_request_to_lower = true;
+	}
+
+	if (!send_request_to_increase && send_request_to_lower) {
+		/*use dcfclk to request voltage*/
+		if (pp_smu->set_hard_min_fclk_by_freq &&
+				pp_smu->set_hard_min_dcfclk_by_freq &&
+				pp_smu->set_min_deep_sleep_dcfclk) {
+			pp_smu->set_hard_min_fclk_by_freq(&pp_smu->pp_smu, khz_to_mhz_ceil(new_clocks->fclk_khz));
+			pp_smu->set_hard_min_dcfclk_by_freq(&pp_smu->pp_smu, khz_to_mhz_ceil(new_clocks->dcfclk_khz));
+			pp_smu->set_min_deep_sleep_dcfclk(&pp_smu->pp_smu, khz_to_mhz_ceil(new_clocks->dcfclk_deep_sleep_khz));
+		}
+	}
+}
+
+static void rv1_enable_pme_wa(struct clk_mgr *clk_mgr_base)
+{
+	struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
+	struct pp_smu_funcs_rv *pp_smu = NULL;
+
+	if (clk_mgr->pp_smu) {
+		pp_smu = &clk_mgr->pp_smu->rv_funcs;
+
+		if (pp_smu->set_pme_wa_enable)
+			pp_smu->set_pme_wa_enable(&pp_smu->pp_smu);
+	}
+}
+
+static struct clk_mgr_funcs rv1_clk_funcs = {
+	.init_clocks = rv1_init_clocks,
+	.get_dp_ref_clk_frequency = dce12_get_dp_ref_freq_khz,
+	.update_clocks = rv1_update_clocks,
+	.enable_pme_wa = rv1_enable_pme_wa,
+};
+
+static struct clk_mgr_internal_funcs rv1_clk_internal_funcs = {
+	.set_dispclk = rv1_vbios_smu_set_dispclk,
+	.set_dprefclk = dce112_set_dprefclk
+};
+
+void rv1_clk_mgr_construct(struct dc_context *ctx, struct clk_mgr_internal *clk_mgr, struct pp_smu_funcs *pp_smu)
+{
+	struct dc_debug_options *debug = &ctx->dc->debug;
+	struct dc_bios *bp = ctx->dc_bios;
+
+	clk_mgr->base.ctx = ctx;
+	clk_mgr->pp_smu = pp_smu;
+	clk_mgr->base.funcs = &rv1_clk_funcs;
+	clk_mgr->funcs = &rv1_clk_internal_funcs;
+
+	clk_mgr->dfs_bypass_disp_clk = 0;
+
+	clk_mgr->dprefclk_ss_percentage = 0;
+	clk_mgr->dprefclk_ss_divider = 1000;
+	clk_mgr->ss_on_dprefclk = false;
+	clk_mgr->base.dprefclk_khz = 600000;
+
+	if (bp->integrated_info)
+		clk_mgr->base.dentist_vco_freq_khz = bp->integrated_info->dentist_vco_freq;
+	if (bp->fw_info_valid && clk_mgr->base.dentist_vco_freq_khz == 0) {
+		clk_mgr->base.dentist_vco_freq_khz = bp->fw_info.smu_gpu_pll_output_freq;
+		if (clk_mgr->base.dentist_vco_freq_khz == 0)
+			clk_mgr->base.dentist_vco_freq_khz = 3600000;
+	}
+
+	if (!debug->disable_dfs_bypass && bp->integrated_info)
+		if (bp->integrated_info->gpu_cap_info & DFS_BYPASS_ENABLE)
+			clk_mgr->dfs_bypass_enabled = true;
+
+	dce_clock_read_ss_info(clk_mgr);
+}
+
+
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr.h b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr.h
new file mode 100644
index 000000000..0807478c8
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2018 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#ifndef __RV1_CLK_MGR_H__
+#define __RV1_CLK_MGR_H__
+
+void rv1_clk_mgr_construct(struct dc_context *ctx, struct clk_mgr_internal *clk_mgr, struct pp_smu_funcs *pp_smu);
+
+#endif //__DCN10_CLK_MGR_H__
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_clk.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_clk.c
new file mode 100644
index 000000000..61dd12198
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_clk.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright 2012-16 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#include "reg_helper.h"
+#include "clk_mgr_internal.h"
+#include "rv1_clk_mgr_clk.h"
+
+#include "ip/Discovery/hwid.h"
+#include "ip/Discovery/v1/ip_offset_1.h"
+#include "ip/CLK/clk_10_0_default.h"
+#include "ip/CLK/clk_10_0_offset.h"
+#include "ip/CLK/clk_10_0_reg.h"
+#include "ip/CLK/clk_10_0_sh_mask.h"
+
+#include "dce100/dce_clk_mgr.h"
+
+#define CLK_BASE_INNER(inst) \
+	CLK_BASE__INST ## inst ## _SEG0
+
+
+#define CLK_REG(reg_name, block, inst)\
+	CLK_BASE(mm ## block ## _ ## inst ## _ ## reg_name ## _BASE_IDX) + \
+					mm ## block ## _ ## inst ## _ ## reg_name
+
+#define REG(reg_name) \
+	CLK_REG(reg_name, CLK0, 0)
+
+
+/* Only used by testing framework*/
+void rv1_dump_clk_registers(struct clk_state_registers *regs, struct clk_bypass *bypass, struct clk_mgr *clk_mgr_base)
+{
+	struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
+
+		regs->CLK0_CLK8_CURRENT_CNT = REG_READ(CLK0_CLK8_CURRENT_CNT) / 10; //dcf clk
+
+		bypass->dcfclk_bypass = REG_READ(CLK0_CLK8_BYPASS_CNTL) & 0x0007;
+		if (bypass->dcfclk_bypass < 0 || bypass->dcfclk_bypass > 4)
+			bypass->dcfclk_bypass = 0;
+
+
+		regs->CLK0_CLK8_DS_CNTL = REG_READ(CLK0_CLK8_DS_CNTL) / 10;	//dcf deep sleep divider
+
+		regs->CLK0_CLK8_ALLOW_DS = REG_READ(CLK0_CLK8_ALLOW_DS); //dcf deep sleep allow
+
+		regs->CLK0_CLK10_CURRENT_CNT = REG_READ(CLK0_CLK10_CURRENT_CNT) / 10; //dpref clk
+
+		bypass->dispclk_pypass = REG_READ(CLK0_CLK10_BYPASS_CNTL) & 0x0007;
+		if (bypass->dispclk_pypass < 0 || bypass->dispclk_pypass > 4)
+			bypass->dispclk_pypass = 0;
+
+		regs->CLK0_CLK11_CURRENT_CNT = REG_READ(CLK0_CLK11_CURRENT_CNT) / 10; //disp clk
+
+		bypass->dprefclk_bypass = REG_READ(CLK0_CLK11_BYPASS_CNTL) & 0x0007;
+		if (bypass->dprefclk_bypass < 0 || bypass->dprefclk_bypass > 4)
+			bypass->dprefclk_bypass = 0;
+
+}
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_clk.h b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_clk.h
new file mode 100644
index 000000000..b68e3452e
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_clk.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2018 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#ifndef DAL_DC_DCN10_RV1_CLK_MGR_CLK_H_
+#define DAL_DC_DCN10_RV1_CLK_MGR_CLK_H_
+
+#endif /* DAL_DC_DCN10_RV1_CLK_MGR_CLK_H_ */
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.c
new file mode 100644
index 000000000..450eaead4
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.c
@@ -0,0 +1,161 @@
+/*
+ * Copyright 2012-16 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#include "core_types.h"
+#include "clk_mgr_internal.h"
+#include "reg_helper.h"
+#include <linux/delay.h>
+
+#include "rv1_clk_mgr_vbios_smu.h"
+
+#define MAX_INSTANCE	5
+#define MAX_SEGMENT		5
+
+struct IP_BASE_INSTANCE {
+	unsigned int segment[MAX_SEGMENT];
+};
+
+struct IP_BASE {
+	struct IP_BASE_INSTANCE instance[MAX_INSTANCE];
+};
+
+
+static const struct IP_BASE MP1_BASE  = { { { { 0x00016000, 0, 0, 0, 0 } },
+											 { { 0, 0, 0, 0, 0 } },
+											 { { 0, 0, 0, 0, 0 } },
+											 { { 0, 0, 0, 0, 0 } },
+											 { { 0, 0, 0, 0, 0 } } } };
+
+#define mmMP1_SMN_C2PMSG_91            0x29B
+#define mmMP1_SMN_C2PMSG_83            0x293
+#define mmMP1_SMN_C2PMSG_67            0x283
+#define mmMP1_SMN_C2PMSG_91_BASE_IDX   0
+#define mmMP1_SMN_C2PMSG_83_BASE_IDX   0
+#define mmMP1_SMN_C2PMSG_67_BASE_IDX   0
+
+#define MP1_SMN_C2PMSG_91__CONTENT_MASK                    0xffffffffL
+#define MP1_SMN_C2PMSG_83__CONTENT_MASK                    0xffffffffL
+#define MP1_SMN_C2PMSG_67__CONTENT_MASK                    0xffffffffL
+#define MP1_SMN_C2PMSG_91__CONTENT__SHIFT                  0x00000000
+#define MP1_SMN_C2PMSG_83__CONTENT__SHIFT                  0x00000000
+#define MP1_SMN_C2PMSG_67__CONTENT__SHIFT                  0x00000000
+
+#define REG(reg_name) \
+	(MP1_BASE.instance[0].segment[mm ## reg_name ## _BASE_IDX] + mm ## reg_name)
+
+#define FN(reg_name, field) \
+	FD(reg_name##__##field)
+
+#define VBIOSSMC_MSG_SetDispclkFreq           0x4
+#define VBIOSSMC_MSG_SetDprefclkFreq          0x5
+
+#define VBIOSSMC_Status_BUSY                      0x0
+#define VBIOSSMC_Result_OK                        0x1
+#define VBIOSSMC_Result_Failed                    0xFF
+#define VBIOSSMC_Result_UnknownCmd                0xFE
+#define VBIOSSMC_Result_CmdRejectedPrereq         0xFD
+#define VBIOSSMC_Result_CmdRejectedBusy           0xFC
+
+/*
+ * Function to be used instead of REG_WAIT macro because the wait ends when
+ * the register is NOT EQUAL to zero, and because the translation in msg_if.h
+ * won't work with REG_WAIT.
+ */
+static uint32_t rv1_smu_wait_for_response(struct clk_mgr_internal *clk_mgr, unsigned int delay_us, unsigned int max_retries)
+{
+	uint32_t res_val = VBIOSSMC_Status_BUSY;
+
+	do {
+		res_val = REG_READ(MP1_SMN_C2PMSG_91);
+		if (res_val != VBIOSSMC_Status_BUSY)
+			break;
+
+		if (delay_us >= 1000)
+			msleep(delay_us/1000);
+		else if (delay_us > 0)
+			udelay(delay_us);
+	} while (max_retries--);
+
+	return res_val;
+}
+
+static int rv1_vbios_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr,
+		unsigned int msg_id, unsigned int param)
+{
+	uint32_t result;
+
+	/* First clear response register */
+	REG_WRITE(MP1_SMN_C2PMSG_91, VBIOSSMC_Status_BUSY);
+
+	/* Set the parameter register for the SMU message, unit is Mhz */
+	REG_WRITE(MP1_SMN_C2PMSG_83, param);
+
+	/* Trigger the message transaction by writing the message ID */
+	REG_WRITE(MP1_SMN_C2PMSG_67, msg_id);
+
+	result = rv1_smu_wait_for_response(clk_mgr, 10, 1000);
+
+	ASSERT(result == VBIOSSMC_Result_OK);
+
+	/* Actual dispclk set is returned in the parameter register */
+	return REG_READ(MP1_SMN_C2PMSG_83);
+}
+
+int rv1_vbios_smu_set_dispclk(struct clk_mgr_internal *clk_mgr, int requested_dispclk_khz)
+{
+	int actual_dispclk_set_mhz = -1;
+	struct dc *dc = clk_mgr->base.ctx->dc;
+	struct dmcu *dmcu = dc->res_pool->dmcu;
+
+	/*  Unit of SMU msg parameter is Mhz */
+	actual_dispclk_set_mhz = rv1_vbios_smu_send_msg_with_param(
+			clk_mgr,
+			VBIOSSMC_MSG_SetDispclkFreq,
+			khz_to_mhz_ceil(requested_dispclk_khz));
+
+	if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) {
+		if (dmcu && dmcu->funcs->is_dmcu_initialized(dmcu)) {
+			if (clk_mgr->dfs_bypass_disp_clk != actual_dispclk_set_mhz)
+				dmcu->funcs->set_psr_wait_loop(dmcu,
+						actual_dispclk_set_mhz / 7);
+		}
+	}
+
+	return actual_dispclk_set_mhz * 1000;
+}
+
+int rv1_vbios_smu_set_dprefclk(struct clk_mgr_internal *clk_mgr)
+{
+	int actual_dprefclk_set_mhz = -1;
+
+	actual_dprefclk_set_mhz = rv1_vbios_smu_send_msg_with_param(
+			clk_mgr,
+			VBIOSSMC_MSG_SetDprefclkFreq,
+			khz_to_mhz_ceil(clk_mgr->base.dprefclk_khz));
+
+	/* TODO: add code for programing DP DTO, currently this is down by command table */
+
+	return actual_dprefclk_set_mhz * 1000;
+}
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.h b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.h
new file mode 100644
index 000000000..083cb3158
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2018 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#ifndef DAL_DC_DCN10_RV1_CLK_MGR_VBIOS_SMU_H_
+#define DAL_DC_DCN10_RV1_CLK_MGR_VBIOS_SMU_H_
+
+int rv1_vbios_smu_set_dispclk(struct clk_mgr_internal *clk_mgr, int requested_dispclk_khz);
+int rv1_vbios_smu_set_dprefclk(struct clk_mgr_internal *clk_mgr);
+
+#endif /* DAL_DC_DCN10_RV1_CLK_MGR_VBIOS_SMU_H_ */
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv2_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv2_clk_mgr.c
new file mode 100644
index 000000000..b9ba6dbc2
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv2_clk_mgr.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2018 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#include "core_types.h"
+#include "clk_mgr_internal.h"
+#include "rv1_clk_mgr.h"
+#include "rv2_clk_mgr.h"
+#include "dce112/dce112_clk_mgr.h"
+
+static struct clk_mgr_internal_funcs rv2_clk_internal_funcs = {
+	.set_dispclk = dce112_set_dispclk,
+	.set_dprefclk = dce112_set_dprefclk
+};
+
+void rv2_clk_mgr_construct(struct dc_context *ctx, struct clk_mgr_internal *clk_mgr, struct pp_smu_funcs *pp_smu)
+
+{
+	rv1_clk_mgr_construct(ctx, clk_mgr, pp_smu);
+
+	clk_mgr->funcs = &rv2_clk_internal_funcs;
+}
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv2_clk_mgr.h b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv2_clk_mgr.h
new file mode 100644
index 000000000..0c1f26ca5
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv2_clk_mgr.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2018 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#ifndef __RV2_CLK_MGR_H__
+#define __RV2_CLK_MGR_H__
+
+void rv2_clk_mgr_construct(struct dc_context *ctx, struct clk_mgr_internal *clk_mgr, struct pp_smu_funcs *pp_smu);
+
+
+#endif //__DCN10_CLK_MGR_H__