Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 967 insertions, 0 deletions

diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/dce/dce_clk_mgr.c
new file mode 100644
index 000000000..07359eb89
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_clk_mgr.c
@@ -0,0 +1,967 @@
+/*
+ * Copyright 2012-16 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#include <linux/slab.h>
+
+#include "dce_clk_mgr.h"
+
+#include "reg_helper.h"
+#include "dmcu.h"
+#include "core_types.h"
+#include "dal_asic_id.h"
+
+#define TO_DCE_CLK_MGR(clocks)\
+	container_of(clocks, struct dce_clk_mgr, base)
+
+#define REG(reg) \
+	(clk_mgr_dce->regs->reg)
+
+#undef FN
+#define FN(reg_name, field_name) \
+	clk_mgr_dce->clk_mgr_shift->field_name, clk_mgr_dce->clk_mgr_mask->field_name
+
+#define CTX \
+	clk_mgr_dce->base.ctx
+#define DC_LOGGER \
+	clk_mgr->ctx->logger
+
+/* Max clock values for each state indexed by "enum clocks_state": */
+static const struct state_dependent_clocks dce80_max_clks_by_state[] = {
+/* ClocksStateInvalid - should not be used */
+{ .display_clk_khz = 0, .pixel_clk_khz = 0 },
+/* ClocksStateUltraLow - not expected to be used for DCE 8.0 */
+{ .display_clk_khz = 0, .pixel_clk_khz = 0 },
+/* ClocksStateLow */
+{ .display_clk_khz = 352000, .pixel_clk_khz = 330000},
+/* ClocksStateNominal */
+{ .display_clk_khz = 600000, .pixel_clk_khz = 400000 },
+/* ClocksStatePerformance */
+{ .display_clk_khz = 600000, .pixel_clk_khz = 400000 } };
+
+static const struct state_dependent_clocks dce110_max_clks_by_state[] = {
+/*ClocksStateInvalid - should not be used*/
+{ .display_clk_khz = 0, .pixel_clk_khz = 0 },
+/*ClocksStateUltraLow - currently by HW design team not supposed to be used*/
+{ .display_clk_khz = 352000, .pixel_clk_khz = 330000 },
+/*ClocksStateLow*/
+{ .display_clk_khz = 352000, .pixel_clk_khz = 330000 },
+/*ClocksStateNominal*/
+{ .display_clk_khz = 467000, .pixel_clk_khz = 400000 },
+/*ClocksStatePerformance*/
+{ .display_clk_khz = 643000, .pixel_clk_khz = 400000 } };
+
+static const struct state_dependent_clocks dce112_max_clks_by_state[] = {
+/*ClocksStateInvalid - should not be used*/
+{ .display_clk_khz = 0, .pixel_clk_khz = 0 },
+/*ClocksStateUltraLow - currently by HW design team not supposed to be used*/
+{ .display_clk_khz = 389189, .pixel_clk_khz = 346672 },
+/*ClocksStateLow*/
+{ .display_clk_khz = 459000, .pixel_clk_khz = 400000 },
+/*ClocksStateNominal*/
+{ .display_clk_khz = 667000, .pixel_clk_khz = 600000 },
+/*ClocksStatePerformance*/
+{ .display_clk_khz = 1132000, .pixel_clk_khz = 600000 } };
+
+static const struct state_dependent_clocks dce120_max_clks_by_state[] = {
+/*ClocksStateInvalid - should not be used*/
+{ .display_clk_khz = 0, .pixel_clk_khz = 0 },
+/*ClocksStateUltraLow - currently by HW design team not supposed to be used*/
+{ .display_clk_khz = 0, .pixel_clk_khz = 0 },
+/*ClocksStateLow*/
+{ .display_clk_khz = 460000, .pixel_clk_khz = 400000 },
+/*ClocksStateNominal*/
+{ .display_clk_khz = 670000, .pixel_clk_khz = 600000 },
+/*ClocksStatePerformance*/
+{ .display_clk_khz = 1133000, .pixel_clk_khz = 600000 } };
+
+int dentist_get_divider_from_did(int did)
+{
+	if (did < DENTIST_BASE_DID_1)
+		did = DENTIST_BASE_DID_1;
+	if (did > DENTIST_MAX_DID)
+		did = DENTIST_MAX_DID;
+
+	if (did < DENTIST_BASE_DID_2) {
+		return DENTIST_DIVIDER_RANGE_1_START + DENTIST_DIVIDER_RANGE_1_STEP
+							* (did - DENTIST_BASE_DID_1);
+	} else if (did < DENTIST_BASE_DID_3) {
+		return DENTIST_DIVIDER_RANGE_2_START + DENTIST_DIVIDER_RANGE_2_STEP
+							* (did - DENTIST_BASE_DID_2);
+	} else if (did < DENTIST_BASE_DID_4) {
+		return DENTIST_DIVIDER_RANGE_3_START + DENTIST_DIVIDER_RANGE_3_STEP
+							* (did - DENTIST_BASE_DID_3);
+	} else {
+		return DENTIST_DIVIDER_RANGE_4_START + DENTIST_DIVIDER_RANGE_4_STEP
+							* (did - DENTIST_BASE_DID_4);
+	}
+}
+
+/* SW will adjust DP REF Clock average value for all purposes
+ * (DP DTO / DP Audio DTO and DP GTC)
+ if clock is spread for all cases:
+ -if SS enabled on DP Ref clock and HW de-spreading enabled with SW
+ calculations for DS_INCR/DS_MODULO (this is planned to be default case)
+ -if SS enabled on DP Ref clock and HW de-spreading enabled with HW
+ calculations (not planned to be used, but average clock should still
+ be valid)
+ -if SS enabled on DP Ref clock and HW de-spreading disabled
+ (should not be case with CIK) then SW should program all rates
+ generated according to average value (case as with previous ASICs)
+  */
+static int clk_mgr_adjust_dp_ref_freq_for_ss(struct dce_clk_mgr *clk_mgr_dce, int dp_ref_clk_khz)
+{
+	if (clk_mgr_dce->ss_on_dprefclk && clk_mgr_dce->dprefclk_ss_divider != 0) {
+		struct fixed31_32 ss_percentage = dc_fixpt_div_int(
+				dc_fixpt_from_fraction(clk_mgr_dce->dprefclk_ss_percentage,
+							clk_mgr_dce->dprefclk_ss_divider), 200);
+		struct fixed31_32 adj_dp_ref_clk_khz;
+
+		ss_percentage = dc_fixpt_sub(dc_fixpt_one, ss_percentage);
+		adj_dp_ref_clk_khz = dc_fixpt_mul_int(ss_percentage, dp_ref_clk_khz);
+		dp_ref_clk_khz = dc_fixpt_floor(adj_dp_ref_clk_khz);
+	}
+	return dp_ref_clk_khz;
+}
+
+static int dce_get_dp_ref_freq_khz(struct clk_mgr *clk_mgr)
+{
+	struct dce_clk_mgr *clk_mgr_dce = TO_DCE_CLK_MGR(clk_mgr);
+	int dprefclk_wdivider;
+	int dprefclk_src_sel;
+	int dp_ref_clk_khz = 600000;
+	int target_div;
+
+	/* ASSERT DP Reference Clock source is from DFS*/
+	REG_GET(DPREFCLK_CNTL, DPREFCLK_SRC_SEL, &dprefclk_src_sel);
+	ASSERT(dprefclk_src_sel == 0);
+
+	/* Read the mmDENTIST_DISPCLK_CNTL to get the currently
+	 * programmed DID DENTIST_DPREFCLK_WDIVIDER*/
+	REG_GET(DENTIST_DISPCLK_CNTL, DENTIST_DPREFCLK_WDIVIDER, &dprefclk_wdivider);
+
+	/* Convert DENTIST_DPREFCLK_WDIVIDERto actual divider*/
+	target_div = dentist_get_divider_from_did(dprefclk_wdivider);
+
+	/* Calculate the current DFS clock, in kHz.*/
+	dp_ref_clk_khz = (DENTIST_DIVIDER_RANGE_SCALE_FACTOR
+		* clk_mgr_dce->dentist_vco_freq_khz) / target_div;
+
+	return clk_mgr_adjust_dp_ref_freq_for_ss(clk_mgr_dce, dp_ref_clk_khz);
+}
+
+int dce12_get_dp_ref_freq_khz(struct clk_mgr *clk_mgr)
+{
+	struct dce_clk_mgr *clk_mgr_dce = TO_DCE_CLK_MGR(clk_mgr);
+
+	return clk_mgr_adjust_dp_ref_freq_for_ss(clk_mgr_dce, clk_mgr_dce->dprefclk_khz);
+}
+
+/* unit: in_khz before mode set, get pixel clock from context. ASIC register
+ * may not be programmed yet
+ */
+static uint32_t get_max_pixel_clock_for_all_paths(struct dc_state *context)
+{
+	uint32_t max_pix_clk = 0;
+	int i;
+
+	for (i = 0; i < MAX_PIPES; i++) {
+		struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
+
+		if (pipe_ctx->stream == NULL)
+			continue;
+
+		/* do not check under lay */
+		if (pipe_ctx->top_pipe)
+			continue;
+
+		if (pipe_ctx->stream_res.pix_clk_params.requested_pix_clk_100hz / 10 > max_pix_clk)
+			max_pix_clk = pipe_ctx->stream_res.pix_clk_params.requested_pix_clk_100hz / 10;
+
+		/* raise clock state for HBR3/2 if required. Confirmed with HW DCE/DPCS
+		 * logic for HBR3 still needs Nominal (0.8V) on VDDC rail
+		 */
+		if (dc_is_dp_signal(pipe_ctx->stream->signal) &&
+				pipe_ctx->stream_res.pix_clk_params.requested_sym_clk > max_pix_clk)
+			max_pix_clk = pipe_ctx->stream_res.pix_clk_params.requested_sym_clk;
+	}
+
+	return max_pix_clk;
+}
+
+static enum dm_pp_clocks_state dce_get_required_clocks_state(
+	struct clk_mgr *clk_mgr,
+	struct dc_state *context)
+{
+	struct dce_clk_mgr *clk_mgr_dce = TO_DCE_CLK_MGR(clk_mgr);
+	int i;
+	enum dm_pp_clocks_state low_req_clk;
+	int max_pix_clk = get_max_pixel_clock_for_all_paths(context);
+
+	/* Iterate from highest supported to lowest valid state, and update
+	 * lowest RequiredState with the lowest state that satisfies
+	 * all required clocks
+	 */
+	for (i = clk_mgr_dce->max_clks_state; i >= DM_PP_CLOCKS_STATE_ULTRA_LOW; i--)
+		if (context->bw_ctx.bw.dce.dispclk_khz >
+				clk_mgr_dce->max_clks_by_state[i].display_clk_khz
+			|| max_pix_clk >
+				clk_mgr_dce->max_clks_by_state[i].pixel_clk_khz)
+			break;
+
+	low_req_clk = i + 1;
+	if (low_req_clk > clk_mgr_dce->max_clks_state) {
+		/* set max clock state for high phyclock, invalid on exceeding display clock */
+		if (clk_mgr_dce->max_clks_by_state[clk_mgr_dce->max_clks_state].display_clk_khz
+				< context->bw_ctx.bw.dce.dispclk_khz)
+			low_req_clk = DM_PP_CLOCKS_STATE_INVALID;
+		else
+			low_req_clk = clk_mgr_dce->max_clks_state;
+	}
+
+	return low_req_clk;
+}
+
+static int dce_set_clock(
+	struct clk_mgr *clk_mgr,
+	int requested_clk_khz)
+{
+	struct dce_clk_mgr *clk_mgr_dce = TO_DCE_CLK_MGR(clk_mgr);
+	struct bp_pixel_clock_parameters pxl_clk_params = { 0 };
+	struct dc_bios *bp = clk_mgr->ctx->dc_bios;
+	int actual_clock = requested_clk_khz;
+	struct dmcu *dmcu = clk_mgr_dce->base.ctx->dc->res_pool->dmcu;
+
+	/* Make sure requested clock isn't lower than minimum threshold*/
+	if (requested_clk_khz > 0)
+		requested_clk_khz = max(requested_clk_khz,
+				clk_mgr_dce->dentist_vco_freq_khz / 64);
+
+	/* Prepare to program display clock*/
+	pxl_clk_params.target_pixel_clock_100hz = requested_clk_khz * 10;
+	pxl_clk_params.pll_id = CLOCK_SOURCE_ID_DFS;
+
+	if (clk_mgr_dce->dfs_bypass_active)
+		pxl_clk_params.flags.SET_DISPCLK_DFS_BYPASS = true;
+
+	bp->funcs->program_display_engine_pll(bp, &pxl_clk_params);
+
+	if (clk_mgr_dce->dfs_bypass_active) {
+		/* Cache the fixed display clock*/
+		clk_mgr_dce->dfs_bypass_disp_clk =
+			pxl_clk_params.dfs_bypass_display_clock;
+		actual_clock = pxl_clk_params.dfs_bypass_display_clock;
+	}
+
+	/* from power down, we need mark the clock state as ClocksStateNominal
+	 * from HWReset, so when resume we will call pplib voltage regulator.*/
+	if (requested_clk_khz == 0)
+		clk_mgr_dce->cur_min_clks_state = DM_PP_CLOCKS_STATE_NOMINAL;
+
+	if (dmcu && dmcu->funcs->is_dmcu_initialized(dmcu))
+		dmcu->funcs->set_psr_wait_loop(dmcu, actual_clock / 1000 / 7);
+
+	return actual_clock;
+}
+
+int dce112_set_clock(struct clk_mgr *clk_mgr, int requested_clk_khz)
+{
+	struct dce_clk_mgr *clk_mgr_dce = TO_DCE_CLK_MGR(clk_mgr);
+	struct bp_set_dce_clock_parameters dce_clk_params;
+	struct dc_bios *bp = clk_mgr->ctx->dc_bios;
+	struct dc *core_dc = clk_mgr->ctx->dc;
+	struct dmcu *dmcu = core_dc->res_pool->dmcu;
+	int actual_clock = requested_clk_khz;
+	/* Prepare to program display clock*/
+	memset(&dce_clk_params, 0, sizeof(dce_clk_params));
+
+	/* Make sure requested clock isn't lower than minimum threshold*/
+	if (requested_clk_khz > 0)
+		requested_clk_khz = max(requested_clk_khz,
+				clk_mgr_dce->dentist_vco_freq_khz / 62);
+
+	dce_clk_params.target_clock_frequency = requested_clk_khz;
+	dce_clk_params.pll_id = CLOCK_SOURCE_ID_DFS;
+	dce_clk_params.clock_type = DCECLOCK_TYPE_DISPLAY_CLOCK;
+
+	bp->funcs->set_dce_clock(bp, &dce_clk_params);
+	actual_clock = dce_clk_params.target_clock_frequency;
+
+	/* from power down, we need mark the clock state as ClocksStateNominal
+	 * from HWReset, so when resume we will call pplib voltage regulator.*/
+	if (requested_clk_khz == 0)
+		clk_mgr_dce->cur_min_clks_state = DM_PP_CLOCKS_STATE_NOMINAL;
+
+	/*Program DP ref Clock*/
+	/*VBIOS will determine DPREFCLK frequency, so we don't set it*/
+	dce_clk_params.target_clock_frequency = 0;
+	dce_clk_params.clock_type = DCECLOCK_TYPE_DPREFCLK;
+
+	if (!((clk_mgr->ctx->asic_id.chip_family == FAMILY_AI) &&
+	       ASICREV_IS_VEGA20_P(clk_mgr->ctx->asic_id.hw_internal_rev)))
+		dce_clk_params.flags.USE_GENLOCK_AS_SOURCE_FOR_DPREFCLK =
+			(dce_clk_params.pll_id ==
+					CLOCK_SOURCE_COMBO_DISPLAY_PLL0);
+	else
+		dce_clk_params.flags.USE_GENLOCK_AS_SOURCE_FOR_DPREFCLK = false;
+
+	bp->funcs->set_dce_clock(bp, &dce_clk_params);
+
+	if (!IS_FPGA_MAXIMUS_DC(core_dc->ctx->dce_environment)) {
+		if (dmcu && dmcu->funcs->is_dmcu_initialized(dmcu)) {
+			if (clk_mgr_dce->dfs_bypass_disp_clk != actual_clock)
+				dmcu->funcs->set_psr_wait_loop(dmcu,
+						actual_clock / 1000 / 7);
+		}
+	}
+
+	clk_mgr_dce->dfs_bypass_disp_clk = actual_clock;
+	return actual_clock;
+}
+
+static void dce_clock_read_integrated_info(struct dce_clk_mgr *clk_mgr_dce)
+{
+	struct dc_debug_options *debug = &clk_mgr_dce->base.ctx->dc->debug;
+	struct dc_bios *bp = clk_mgr_dce->base.ctx->dc_bios;
+	struct integrated_info info = { { { 0 } } };
+	struct dc_firmware_info fw_info = { { 0 } };
+	int i;
+
+	if (bp->integrated_info)
+		info = *bp->integrated_info;
+
+	clk_mgr_dce->dentist_vco_freq_khz = info.dentist_vco_freq;
+	if (clk_mgr_dce->dentist_vco_freq_khz == 0) {
+		bp->funcs->get_firmware_info(bp, &fw_info);
+		clk_mgr_dce->dentist_vco_freq_khz =
+			fw_info.smu_gpu_pll_output_freq;
+		if (clk_mgr_dce->dentist_vco_freq_khz == 0)
+			clk_mgr_dce->dentist_vco_freq_khz = 3600000;
+	}
+
+	/*update the maximum display clock for each power state*/
+	for (i = 0; i < NUMBER_OF_DISP_CLK_VOLTAGE; ++i) {
+		enum dm_pp_clocks_state clk_state = DM_PP_CLOCKS_STATE_INVALID;
+
+		switch (i) {
+		case 0:
+			clk_state = DM_PP_CLOCKS_STATE_ULTRA_LOW;
+			break;
+
+		case 1:
+			clk_state = DM_PP_CLOCKS_STATE_LOW;
+			break;
+
+		case 2:
+			clk_state = DM_PP_CLOCKS_STATE_NOMINAL;
+			break;
+
+		case 3:
+			clk_state = DM_PP_CLOCKS_STATE_PERFORMANCE;
+			break;
+
+		default:
+			clk_state = DM_PP_CLOCKS_STATE_INVALID;
+			break;
+		}
+
+		/*Do not allow bad VBIOS/SBIOS to override with invalid values,
+		 * check for > 100MHz*/
+		if (info.disp_clk_voltage[i].max_supported_clk >= 100000)
+			clk_mgr_dce->max_clks_by_state[clk_state].display_clk_khz =
+				info.disp_clk_voltage[i].max_supported_clk;
+	}
+
+	if (!debug->disable_dfs_bypass && bp->integrated_info)
+		if (bp->integrated_info->gpu_cap_info & DFS_BYPASS_ENABLE)
+			clk_mgr_dce->dfs_bypass_enabled = true;
+}
+
+void dce_clock_read_ss_info(struct dce_clk_mgr *clk_mgr_dce)
+{
+	struct dc_bios *bp = clk_mgr_dce->base.ctx->dc_bios;
+	int ss_info_num = bp->funcs->get_ss_entry_number(
+			bp, AS_SIGNAL_TYPE_GPU_PLL);
+
+	if (ss_info_num) {
+		struct spread_spectrum_info info = { { 0 } };
+		enum bp_result result = bp->funcs->get_spread_spectrum_info(
+				bp, AS_SIGNAL_TYPE_GPU_PLL, 0, &info);
+
+		/* Based on VBIOS, VBIOS will keep entry for GPU PLL SS
+		 * even if SS not enabled and in that case
+		 * SSInfo.spreadSpectrumPercentage !=0 would be sign
+		 * that SS is enabled
+		 */
+		if (result == BP_RESULT_OK &&
+				info.spread_spectrum_percentage != 0) {
+			clk_mgr_dce->ss_on_dprefclk = true;
+			clk_mgr_dce->dprefclk_ss_divider = info.spread_percentage_divider;
+
+			if (info.type.CENTER_MODE == 0) {
+				/* TODO: Currently for DP Reference clock we
+				 * need only SS percentage for
+				 * downspread */
+				clk_mgr_dce->dprefclk_ss_percentage =
+						info.spread_spectrum_percentage;
+			}
+
+			return;
+		}
+
+		result = bp->funcs->get_spread_spectrum_info(
+				bp, AS_SIGNAL_TYPE_DISPLAY_PORT, 0, &info);
+
+		/* Based on VBIOS, VBIOS will keep entry for DPREFCLK SS
+		 * even if SS not enabled and in that case
+		 * SSInfo.spreadSpectrumPercentage !=0 would be sign
+		 * that SS is enabled
+		 */
+		if (result == BP_RESULT_OK &&
+				info.spread_spectrum_percentage != 0) {
+			clk_mgr_dce->ss_on_dprefclk = true;
+			clk_mgr_dce->dprefclk_ss_divider = info.spread_percentage_divider;
+
+			if (info.type.CENTER_MODE == 0) {
+				/* Currently for DP Reference clock we
+				 * need only SS percentage for
+				 * downspread */
+				clk_mgr_dce->dprefclk_ss_percentage =
+						info.spread_spectrum_percentage;
+			}
+			if (clk_mgr_dce->base.ctx->dc->debug.ignore_dpref_ss)
+				clk_mgr_dce->dprefclk_ss_percentage = 0;
+		}
+	}
+}
+
+/**
+ * dce121_clock_patch_xgmi_ss_info() - Save XGMI spread spectrum info
+ * @clk_mgr: clock manager base structure
+ *
+ * Reads from VBIOS the XGMI spread spectrum info and saves it within
+ * the dce clock manager. This operation will overwrite the existing dprefclk
+ * SS values if the vBIOS query succeeds. Otherwise, it does nothing. It also
+ * sets the ->xgmi_enabled flag.
+ */
+void dce121_clock_patch_xgmi_ss_info(struct clk_mgr *clk_mgr)
+{
+	struct dce_clk_mgr *clk_mgr_dce = TO_DCE_CLK_MGR(clk_mgr);
+	enum bp_result result;
+	struct spread_spectrum_info info = { { 0 } };
+	struct dc_bios *bp = clk_mgr_dce->base.ctx->dc_bios;
+
+	clk_mgr_dce->xgmi_enabled = false;
+
+	result = bp->funcs->get_spread_spectrum_info(bp, AS_SIGNAL_TYPE_XGMI,
+						     0, &info);
+	if (result == BP_RESULT_OK && info.spread_spectrum_percentage != 0) {
+		clk_mgr_dce->xgmi_enabled = true;
+		clk_mgr_dce->ss_on_dprefclk = true;
+		clk_mgr_dce->dprefclk_ss_divider =
+				info.spread_percentage_divider;
+
+		if (info.type.CENTER_MODE == 0) {
+			/* Currently for DP Reference clock we
+			 * need only SS percentage for
+			 * downspread */
+			clk_mgr_dce->dprefclk_ss_percentage =
+					info.spread_spectrum_percentage;
+		}
+	}
+}
+
+void dce110_fill_display_configs(
+	const struct dc_state *context,
+	struct dm_pp_display_configuration *pp_display_cfg)
+{
+	int j;
+	int num_cfgs = 0;
+
+	for (j = 0; j < context->stream_count; j++) {
+		int k;
+
+		const struct dc_stream_state *stream = context->streams[j];
+		struct dm_pp_single_disp_config *cfg =
+			&pp_display_cfg->disp_configs[num_cfgs];
+		const struct pipe_ctx *pipe_ctx = NULL;
+
+		for (k = 0; k < MAX_PIPES; k++)
+			if (stream == context->res_ctx.pipe_ctx[k].stream) {
+				pipe_ctx = &context->res_ctx.pipe_ctx[k];
+				break;
+			}
+
+		ASSERT(pipe_ctx != NULL);
+
+		/* only notify active stream */
+		if (stream->dpms_off)
+			continue;
+
+		num_cfgs++;
+		cfg->signal = pipe_ctx->stream->signal;
+		cfg->pipe_idx = pipe_ctx->stream_res.tg->inst;
+		cfg->src_height = stream->src.height;
+		cfg->src_width = stream->src.width;
+		cfg->ddi_channel_mapping =
+			stream->link->ddi_channel_mapping.raw;
+		cfg->transmitter =
+			stream->link->link_enc->transmitter;
+		cfg->link_settings.lane_count =
+			stream->link->cur_link_settings.lane_count;
+		cfg->link_settings.link_rate =
+			stream->link->cur_link_settings.link_rate;
+		cfg->link_settings.link_spread =
+			stream->link->cur_link_settings.link_spread;
+		cfg->sym_clock = stream->phy_pix_clk;
+		/* Round v_refresh*/
+		cfg->v_refresh = stream->timing.pix_clk_100hz * 100;
+		cfg->v_refresh /= stream->timing.h_total;
+		cfg->v_refresh = (cfg->v_refresh + stream->timing.v_total / 2)
+							/ stream->timing.v_total;
+	}
+
+	pp_display_cfg->display_count = num_cfgs;
+}
+
+static uint32_t dce110_get_min_vblank_time_us(const struct dc_state *context)
+{
+	uint8_t j;
+	uint32_t min_vertical_blank_time = -1;
+
+	for (j = 0; j < context->stream_count; j++) {
+		struct dc_stream_state *stream = context->streams[j];
+		uint32_t vertical_blank_in_pixels = 0;
+		uint32_t vertical_blank_time = 0;
+
+		vertical_blank_in_pixels = stream->timing.h_total *
+			(stream->timing.v_total
+			 - stream->timing.v_addressable);
+
+		vertical_blank_time = vertical_blank_in_pixels
+			* 10000 / stream->timing.pix_clk_100hz;
+
+		if (min_vertical_blank_time > vertical_blank_time)
+			min_vertical_blank_time = vertical_blank_time;
+	}
+
+	return min_vertical_blank_time;
+}
+
+static int determine_sclk_from_bounding_box(
+		const struct dc *dc,
+		int required_sclk)
+{
+	int i;
+
+	/*
+	 * Some asics do not give us sclk levels, so we just report the actual
+	 * required sclk
+	 */
+	if (dc->sclk_lvls.num_levels == 0)
+		return required_sclk;
+
+	for (i = 0; i < dc->sclk_lvls.num_levels; i++) {
+		if (dc->sclk_lvls.clocks_in_khz[i] >= required_sclk)
+			return dc->sclk_lvls.clocks_in_khz[i];
+	}
+	/*
+	 * even maximum level could not satisfy requirement, this
+	 * is unexpected at this stage, should have been caught at
+	 * validation time
+	 */
+	ASSERT(0);
+	return dc->sclk_lvls.clocks_in_khz[dc->sclk_lvls.num_levels - 1];
+}
+
+static void dce_pplib_apply_display_requirements(
+	struct dc *dc,
+	struct dc_state *context)
+{
+	struct dm_pp_display_configuration *pp_display_cfg = &context->pp_display_cfg;
+
+	pp_display_cfg->avail_mclk_switch_time_us = dce110_get_min_vblank_time_us(context);
+
+	dce110_fill_display_configs(context, pp_display_cfg);
+
+	if (memcmp(&dc->current_state->pp_display_cfg, pp_display_cfg, sizeof(*pp_display_cfg)) !=  0)
+		dm_pp_apply_display_requirements(dc->ctx, pp_display_cfg);
+}
+
+static void dce11_pplib_apply_display_requirements(
+	struct dc *dc,
+	struct dc_state *context)
+{
+	struct dm_pp_display_configuration *pp_display_cfg = &context->pp_display_cfg;
+
+	pp_display_cfg->all_displays_in_sync =
+		context->bw_ctx.bw.dce.all_displays_in_sync;
+	pp_display_cfg->nb_pstate_switch_disable =
+			context->bw_ctx.bw.dce.nbp_state_change_enable == false;
+	pp_display_cfg->cpu_cc6_disable =
+			context->bw_ctx.bw.dce.cpuc_state_change_enable == false;
+	pp_display_cfg->cpu_pstate_disable =
+			context->bw_ctx.bw.dce.cpup_state_change_enable == false;
+	pp_display_cfg->cpu_pstate_separation_time =
+			context->bw_ctx.bw.dce.blackout_recovery_time_us;
+
+	pp_display_cfg->min_memory_clock_khz = context->bw_ctx.bw.dce.yclk_khz
+		/ MEMORY_TYPE_MULTIPLIER_CZ;
+
+	pp_display_cfg->min_engine_clock_khz = determine_sclk_from_bounding_box(
+			dc,
+			context->bw_ctx.bw.dce.sclk_khz);
+
+	/*
+	 * As workaround for >4x4K lightup set dcfclock to min_engine_clock value.
+	 * This is not required for less than 5 displays,
+	 * thus don't request decfclk in dc to avoid impact
+	 * on power saving.
+	 *
+	 */
+	pp_display_cfg->min_dcfclock_khz = (context->stream_count > 4)?
+			pp_display_cfg->min_engine_clock_khz : 0;
+
+	pp_display_cfg->min_engine_clock_deep_sleep_khz
+			= context->bw_ctx.bw.dce.sclk_deep_sleep_khz;
+
+	pp_display_cfg->avail_mclk_switch_time_us =
+						dce110_get_min_vblank_time_us(context);
+	/* TODO: dce11.2*/
+	pp_display_cfg->avail_mclk_switch_time_in_disp_active_us = 0;
+
+	pp_display_cfg->disp_clk_khz = dc->res_pool->clk_mgr->clks.dispclk_khz;
+
+	dce110_fill_display_configs(context, pp_display_cfg);
+
+	/* TODO: is this still applicable?*/
+	if (pp_display_cfg->display_count == 1) {
+		const struct dc_crtc_timing *timing =
+			&context->streams[0]->timing;
+
+		pp_display_cfg->crtc_index =
+			pp_display_cfg->disp_configs[0].pipe_idx;
+		pp_display_cfg->line_time_in_us = timing->h_total * 10000 / timing->pix_clk_100hz;
+	}
+
+	if (memcmp(&dc->current_state->pp_display_cfg, pp_display_cfg, sizeof(*pp_display_cfg)) !=  0)
+		dm_pp_apply_display_requirements(dc->ctx, pp_display_cfg);
+}
+
+static void dce_update_clocks(struct clk_mgr *clk_mgr,
+			struct dc_state *context,
+			bool safe_to_lower)
+{
+	struct dce_clk_mgr *clk_mgr_dce = TO_DCE_CLK_MGR(clk_mgr);
+	struct dm_pp_power_level_change_request level_change_req;
+	int patched_disp_clk = context->bw_ctx.bw.dce.dispclk_khz;
+
+	/*TODO: W/A for dal3 linux, investigate why this works */
+	if (!clk_mgr_dce->dfs_bypass_active)
+		patched_disp_clk = patched_disp_clk * 115 / 100;
+
+	level_change_req.power_level = dce_get_required_clocks_state(clk_mgr, context);
+	/* get max clock state from PPLIB */
+	if ((level_change_req.power_level < clk_mgr_dce->cur_min_clks_state && safe_to_lower)
+			|| level_change_req.power_level > clk_mgr_dce->cur_min_clks_state) {
+		if (dm_pp_apply_power_level_change_request(clk_mgr->ctx, &level_change_req))
+			clk_mgr_dce->cur_min_clks_state = level_change_req.power_level;
+	}
+
+	if (should_set_clock(safe_to_lower, patched_disp_clk, clk_mgr->clks.dispclk_khz)) {
+		patched_disp_clk = dce_set_clock(clk_mgr, patched_disp_clk);
+		clk_mgr->clks.dispclk_khz = patched_disp_clk;
+	}
+	dce_pplib_apply_display_requirements(clk_mgr->ctx->dc, context);
+}
+
+static void dce11_update_clocks(struct clk_mgr *clk_mgr,
+			struct dc_state *context,
+			bool safe_to_lower)
+{
+	struct dce_clk_mgr *clk_mgr_dce = TO_DCE_CLK_MGR(clk_mgr);
+	struct dm_pp_power_level_change_request level_change_req;
+	int patched_disp_clk = context->bw_ctx.bw.dce.dispclk_khz;
+
+	/*TODO: W/A for dal3 linux, investigate why this works */
+	if (!clk_mgr_dce->dfs_bypass_active)
+		patched_disp_clk = patched_disp_clk * 115 / 100;
+
+	level_change_req.power_level = dce_get_required_clocks_state(clk_mgr, context);
+	/* get max clock state from PPLIB */
+	if ((level_change_req.power_level < clk_mgr_dce->cur_min_clks_state && safe_to_lower)
+			|| level_change_req.power_level > clk_mgr_dce->cur_min_clks_state) {
+		if (dm_pp_apply_power_level_change_request(clk_mgr->ctx, &level_change_req))
+			clk_mgr_dce->cur_min_clks_state = level_change_req.power_level;
+	}
+
+	if (should_set_clock(safe_to_lower, patched_disp_clk, clk_mgr->clks.dispclk_khz)) {
+		context->bw_ctx.bw.dce.dispclk_khz = dce_set_clock(clk_mgr, patched_disp_clk);
+		clk_mgr->clks.dispclk_khz = patched_disp_clk;
+	}
+	dce11_pplib_apply_display_requirements(clk_mgr->ctx->dc, context);
+}
+
+static void dce112_update_clocks(struct clk_mgr *clk_mgr,
+			struct dc_state *context,
+			bool safe_to_lower)
+{
+	struct dce_clk_mgr *clk_mgr_dce = TO_DCE_CLK_MGR(clk_mgr);
+	struct dm_pp_power_level_change_request level_change_req;
+	int patched_disp_clk = context->bw_ctx.bw.dce.dispclk_khz;
+
+	/*TODO: W/A for dal3 linux, investigate why this works */
+	if (!clk_mgr_dce->dfs_bypass_active)
+		patched_disp_clk = patched_disp_clk * 115 / 100;
+
+	level_change_req.power_level = dce_get_required_clocks_state(clk_mgr, context);
+	/* get max clock state from PPLIB */
+	if ((level_change_req.power_level < clk_mgr_dce->cur_min_clks_state && safe_to_lower)
+			|| level_change_req.power_level > clk_mgr_dce->cur_min_clks_state) {
+		if (dm_pp_apply_power_level_change_request(clk_mgr->ctx, &level_change_req))
+			clk_mgr_dce->cur_min_clks_state = level_change_req.power_level;
+	}
+
+	if (should_set_clock(safe_to_lower, patched_disp_clk, clk_mgr->clks.dispclk_khz)) {
+		patched_disp_clk = dce112_set_clock(clk_mgr, patched_disp_clk);
+		clk_mgr->clks.dispclk_khz = patched_disp_clk;
+	}
+	dce11_pplib_apply_display_requirements(clk_mgr->ctx->dc, context);
+}
+
+static void dce12_update_clocks(struct clk_mgr *clk_mgr,
+			struct dc_state *context,
+			bool safe_to_lower)
+{
+	struct dce_clk_mgr *clk_mgr_dce = TO_DCE_CLK_MGR(clk_mgr);
+	struct dm_pp_clock_for_voltage_req clock_voltage_req = {0};
+	int max_pix_clk = get_max_pixel_clock_for_all_paths(context);
+	int patched_disp_clk = context->bw_ctx.bw.dce.dispclk_khz;
+
+	/*TODO: W/A for dal3 linux, investigate why this works */
+	if (!clk_mgr_dce->dfs_bypass_active)
+		patched_disp_clk = patched_disp_clk * 115 / 100;
+
+	if (should_set_clock(safe_to_lower, patched_disp_clk, clk_mgr->clks.dispclk_khz)) {
+		clock_voltage_req.clk_type = DM_PP_CLOCK_TYPE_DISPLAY_CLK;
+		/*
+		 * When xGMI is enabled, the display clk needs to be adjusted
+		 * with the WAFL link's SS percentage.
+		 */
+		if (clk_mgr_dce->xgmi_enabled)
+			patched_disp_clk = clk_mgr_adjust_dp_ref_freq_for_ss(
+					clk_mgr_dce, patched_disp_clk);
+		clock_voltage_req.clocks_in_khz = patched_disp_clk;
+		clk_mgr->clks.dispclk_khz = dce112_set_clock(clk_mgr, patched_disp_clk);
+
+		dm_pp_apply_clock_for_voltage_request(clk_mgr->ctx, &clock_voltage_req);
+	}
+
+	if (should_set_clock(safe_to_lower, max_pix_clk, clk_mgr->clks.phyclk_khz)) {
+		clock_voltage_req.clk_type = DM_PP_CLOCK_TYPE_DISPLAYPHYCLK;
+		clock_voltage_req.clocks_in_khz = max_pix_clk;
+		clk_mgr->clks.phyclk_khz = max_pix_clk;
+
+		dm_pp_apply_clock_for_voltage_request(clk_mgr->ctx, &clock_voltage_req);
+	}
+	dce11_pplib_apply_display_requirements(clk_mgr->ctx->dc, context);
+}
+
+static const struct clk_mgr_funcs dce120_funcs = {
+	.get_dp_ref_clk_frequency = dce12_get_dp_ref_freq_khz,
+	.update_clocks = dce12_update_clocks
+};
+
+static const struct clk_mgr_funcs dce112_funcs = {
+	.get_dp_ref_clk_frequency = dce_get_dp_ref_freq_khz,
+	.update_clocks = dce112_update_clocks
+};
+
+static const struct clk_mgr_funcs dce110_funcs = {
+	.get_dp_ref_clk_frequency = dce_get_dp_ref_freq_khz,
+	.update_clocks = dce11_update_clocks,
+};
+
+static const struct clk_mgr_funcs dce_funcs = {
+	.get_dp_ref_clk_frequency = dce_get_dp_ref_freq_khz,
+	.update_clocks = dce_update_clocks
+};
+
+static void dce_clk_mgr_construct(
+	struct dce_clk_mgr *clk_mgr_dce,
+	struct dc_context *ctx,
+	const struct clk_mgr_registers *regs,
+	const struct clk_mgr_shift *clk_shift,
+	const struct clk_mgr_mask *clk_mask)
+{
+	struct clk_mgr *base = &clk_mgr_dce->base;
+	struct dm_pp_static_clock_info static_clk_info = {0};
+
+	base->ctx = ctx;
+	base->funcs = &dce_funcs;
+
+	clk_mgr_dce->regs = regs;
+	clk_mgr_dce->clk_mgr_shift = clk_shift;
+	clk_mgr_dce->clk_mgr_mask = clk_mask;
+
+	clk_mgr_dce->dfs_bypass_disp_clk = 0;
+
+	clk_mgr_dce->dprefclk_ss_percentage = 0;
+	clk_mgr_dce->dprefclk_ss_divider = 1000;
+	clk_mgr_dce->ss_on_dprefclk = false;
+
+
+	if (dm_pp_get_static_clocks(ctx, &static_clk_info))
+		clk_mgr_dce->max_clks_state = static_clk_info.max_clocks_state;
+	else
+		clk_mgr_dce->max_clks_state = DM_PP_CLOCKS_STATE_NOMINAL;
+	clk_mgr_dce->cur_min_clks_state = DM_PP_CLOCKS_STATE_INVALID;
+
+	dce_clock_read_integrated_info(clk_mgr_dce);
+	dce_clock_read_ss_info(clk_mgr_dce);
+}
+
+struct clk_mgr *dce_clk_mgr_create(
+	struct dc_context *ctx,
+	const struct clk_mgr_registers *regs,
+	const struct clk_mgr_shift *clk_shift,
+	const struct clk_mgr_mask *clk_mask)
+{
+	struct dce_clk_mgr *clk_mgr_dce = kzalloc(sizeof(*clk_mgr_dce), GFP_KERNEL);
+
+	if (clk_mgr_dce == NULL) {
+		BREAK_TO_DEBUGGER();
+		return NULL;
+	}
+
+	memcpy(clk_mgr_dce->max_clks_by_state,
+		dce80_max_clks_by_state,
+		sizeof(dce80_max_clks_by_state));
+
+	dce_clk_mgr_construct(
+		clk_mgr_dce, ctx, regs, clk_shift, clk_mask);
+
+	return &clk_mgr_dce->base;
+}
+
+struct clk_mgr *dce110_clk_mgr_create(
+	struct dc_context *ctx,
+	const struct clk_mgr_registers *regs,
+	const struct clk_mgr_shift *clk_shift,
+	const struct clk_mgr_mask *clk_mask)
+{
+	struct dce_clk_mgr *clk_mgr_dce = kzalloc(sizeof(*clk_mgr_dce), GFP_KERNEL);
+
+	if (clk_mgr_dce == NULL) {
+		BREAK_TO_DEBUGGER();
+		return NULL;
+	}
+
+	memcpy(clk_mgr_dce->max_clks_by_state,
+		dce110_max_clks_by_state,
+		sizeof(dce110_max_clks_by_state));
+
+	dce_clk_mgr_construct(
+		clk_mgr_dce, ctx, regs, clk_shift, clk_mask);
+
+	clk_mgr_dce->base.funcs = &dce110_funcs;
+
+	return &clk_mgr_dce->base;
+}
+
+struct clk_mgr *dce112_clk_mgr_create(
+	struct dc_context *ctx,
+	const struct clk_mgr_registers *regs,
+	const struct clk_mgr_shift *clk_shift,
+	const struct clk_mgr_mask *clk_mask)
+{
+	struct dce_clk_mgr *clk_mgr_dce = kzalloc(sizeof(*clk_mgr_dce), GFP_KERNEL);
+
+	if (clk_mgr_dce == NULL) {
+		BREAK_TO_DEBUGGER();
+		return NULL;
+	}
+
+	memcpy(clk_mgr_dce->max_clks_by_state,
+		dce112_max_clks_by_state,
+		sizeof(dce112_max_clks_by_state));
+
+	dce_clk_mgr_construct(
+		clk_mgr_dce, ctx, regs, clk_shift, clk_mask);
+
+	clk_mgr_dce->base.funcs = &dce112_funcs;
+
+	return &clk_mgr_dce->base;
+}
+
+struct clk_mgr *dce120_clk_mgr_create(struct dc_context *ctx)
+{
+	struct dce_clk_mgr *clk_mgr_dce = kzalloc(sizeof(*clk_mgr_dce), GFP_KERNEL);
+
+	if (clk_mgr_dce == NULL) {
+		BREAK_TO_DEBUGGER();
+		return NULL;
+	}
+
+	memcpy(clk_mgr_dce->max_clks_by_state,
+		dce120_max_clks_by_state,
+		sizeof(dce120_max_clks_by_state));
+
+	dce_clk_mgr_construct(
+		clk_mgr_dce, ctx, NULL, NULL, NULL);
+
+	clk_mgr_dce->dprefclk_khz = 600000;
+	clk_mgr_dce->base.funcs = &dce120_funcs;
+
+	return &clk_mgr_dce->base;
+}
+
+struct clk_mgr *dce121_clk_mgr_create(struct dc_context *ctx)
+{
+	struct dce_clk_mgr *clk_mgr_dce = kzalloc(sizeof(*clk_mgr_dce),
+						  GFP_KERNEL);
+
+	if (clk_mgr_dce == NULL) {
+		BREAK_TO_DEBUGGER();
+		return NULL;
+	}
+
+	memcpy(clk_mgr_dce->max_clks_by_state, dce120_max_clks_by_state,
+	       sizeof(dce120_max_clks_by_state));
+
+	dce_clk_mgr_construct(clk_mgr_dce, ctx, NULL, NULL, NULL);
+
+	clk_mgr_dce->dprefclk_khz = 625000;
+	clk_mgr_dce->base.funcs = &dce120_funcs;
+
+	return &clk_mgr_dce->base;
+}
+
+void dce_clk_mgr_destroy(struct clk_mgr **clk_mgr)
+{
+	struct dce_clk_mgr *clk_mgr_dce = TO_DCE_CLK_MGR(*clk_mgr);
+
+	kfree(clk_mgr_dce);
+	*clk_mgr = NULL;
+}