Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 503 insertions, 0 deletions

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.c
new file mode 100644
index 000000000..2f9bfaeab
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.c
@@ -0,0 +1,503 @@
+/*
+ * Copyright 2012-15 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#include "reg_helper.h"
+
+#include "core_types.h"
+#include "link_encoder.h"
+#include "dcn20_link_encoder.h"
+#include "stream_encoder.h"
+#include "i2caux_interface.h"
+#include "dc_bios_types.h"
+
+#include "gpio_service_interface.h"
+
+#define CTX \
+	enc10->base.ctx
+#define DC_LOGGER \
+	enc10->base.ctx->logger
+
+#define REG(reg)\
+	(enc10->link_regs->reg)
+
+#undef FN
+#define FN(reg_name, field_name) \
+	enc10->link_shift->field_name, enc10->link_mask->field_name
+
+#define IND_REG(index) \
+	(enc10->link_regs->index)
+
+#ifndef MAX
+#define MAX(X, Y) ((X) > (Y) ? (X) : (Y))
+#endif
+#ifndef MIN
+#define MIN(X, Y) ((X) < (Y) ? (X) : (Y))
+#endif
+
+static struct mpll_cfg dcn2_mpll_cfg[] = {
+	// RBR
+	{
+		.hdmimode_enable = 1,
+		.ref_range = 3,
+		.ref_clk_mpllb_div = 2,
+		.mpllb_ssc_en = 1,
+		.mpllb_div5_clk_en = 1,
+		.mpllb_multiplier = 226,
+		.mpllb_fracn_en = 1,
+		.mpllb_fracn_quot = 39321,
+		.mpllb_fracn_rem = 3,
+		.mpllb_fracn_den = 5,
+		.mpllb_ssc_up_spread = 0,
+		.mpllb_ssc_peak = 38221,
+		.mpllb_ssc_stepsize = 49314,
+		.mpllb_div_clk_en = 0,
+		.mpllb_div_multiplier = 0,
+		.mpllb_hdmi_div = 0,
+		.mpllb_tx_clk_div = 2,
+		.tx_vboost_lvl = 4,
+		.mpllb_pmix_en = 1,
+		.mpllb_word_div2_en = 0,
+		.mpllb_ana_v2i = 2,
+		.mpllb_ana_freq_vco = 2,
+		.mpllb_ana_cp_int = 7,
+		.mpllb_ana_cp_prop = 18,
+		.hdmi_pixel_clk_div = 0,
+	},
+	// HBR
+	{
+		.hdmimode_enable = 1,
+		.ref_range = 3,
+		.ref_clk_mpllb_div = 2,
+		.mpllb_ssc_en = 1,
+		.mpllb_div5_clk_en = 1,
+		.mpllb_multiplier = 184,
+		.mpllb_fracn_en = 0,
+		.mpllb_fracn_quot = 0,
+		.mpllb_fracn_rem = 0,
+		.mpllb_fracn_den = 1,
+		.mpllb_ssc_up_spread = 0,
+		.mpllb_ssc_peak = 31850,
+		.mpllb_ssc_stepsize = 41095,
+		.mpllb_div_clk_en = 0,
+		.mpllb_div_multiplier = 0,
+		.mpllb_hdmi_div = 0,
+		.mpllb_tx_clk_div = 1,
+		.tx_vboost_lvl = 4,
+		.mpllb_pmix_en = 1,
+		.mpllb_word_div2_en = 0,
+		.mpllb_ana_v2i = 2,
+		.mpllb_ana_freq_vco = 3,
+		.mpllb_ana_cp_int = 7,
+		.mpllb_ana_cp_prop = 18,
+		.hdmi_pixel_clk_div = 0,
+	},
+	//HBR2
+	{
+		.hdmimode_enable = 1,
+		.ref_range = 3,
+		.ref_clk_mpllb_div = 2,
+		.mpllb_ssc_en = 1,
+		.mpllb_div5_clk_en = 1,
+		.mpllb_multiplier = 184,
+		.mpllb_fracn_en = 0,
+		.mpllb_fracn_quot = 0,
+		.mpllb_fracn_rem = 0,
+		.mpllb_fracn_den = 1,
+		.mpllb_ssc_up_spread = 0,
+		.mpllb_ssc_peak = 31850,
+		.mpllb_ssc_stepsize = 41095,
+		.mpllb_div_clk_en = 0,
+		.mpllb_div_multiplier = 0,
+		.mpllb_hdmi_div = 0,
+		.mpllb_tx_clk_div = 0,
+		.tx_vboost_lvl = 4,
+		.mpllb_pmix_en = 1,
+		.mpllb_word_div2_en = 0,
+		.mpllb_ana_v2i = 2,
+		.mpllb_ana_freq_vco = 3,
+		.mpllb_ana_cp_int = 7,
+		.mpllb_ana_cp_prop = 18,
+		.hdmi_pixel_clk_div = 0,
+	},
+	//HBR3
+	{
+		.hdmimode_enable = 1,
+		.ref_range = 3,
+		.ref_clk_mpllb_div = 2,
+		.mpllb_ssc_en = 1,
+		.mpllb_div5_clk_en = 1,
+		.mpllb_multiplier = 292,
+		.mpllb_fracn_en = 0,
+		.mpllb_fracn_quot = 0,
+		.mpllb_fracn_rem = 0,
+		.mpllb_fracn_den = 1,
+		.mpllb_ssc_up_spread = 0,
+		.mpllb_ssc_peak = 47776,
+		.mpllb_ssc_stepsize = 61642,
+		.mpllb_div_clk_en = 0,
+		.mpllb_div_multiplier = 0,
+		.mpllb_hdmi_div = 0,
+		.mpllb_tx_clk_div = 0,
+		.tx_vboost_lvl = 4,
+		.mpllb_pmix_en = 1,
+		.mpllb_word_div2_en = 0,
+		.mpllb_ana_v2i = 2,
+		.mpllb_ana_freq_vco = 0,
+		.mpllb_ana_cp_int = 7,
+		.mpllb_ana_cp_prop = 18,
+		.hdmi_pixel_clk_div = 0,
+	},
+};
+
+void enc2_fec_set_enable(struct link_encoder *enc, bool enable)
+{
+	struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
+	DC_LOG_DSC("%s FEC at link encoder inst %d",
+			enable ? "Enabling" : "Disabling", enc->id.enum_id);
+	REG_UPDATE(DP_DPHY_CNTL, DPHY_FEC_EN, enable);
+}
+
+void enc2_fec_set_ready(struct link_encoder *enc, bool ready)
+{
+	struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
+
+	REG_UPDATE(DP_DPHY_CNTL, DPHY_FEC_READY_SHADOW, ready);
+}
+
+bool enc2_fec_is_active(struct link_encoder *enc)
+{
+	uint32_t active = 0;
+	struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
+
+	REG_GET(DP_DPHY_CNTL, DPHY_FEC_ACTIVE_STATUS, &active);
+
+	return (active != 0);
+}
+
+/* this function reads dsc related register fields to be logged later in dcn10_log_hw_state
+ * into a dcn_dsc_state struct.
+ */
+void link_enc2_read_state(struct link_encoder *enc, struct link_enc_state *s)
+{
+	struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
+
+	REG_GET(DP_DPHY_CNTL, DPHY_FEC_EN, &s->dphy_fec_en);
+	REG_GET(DP_DPHY_CNTL, DPHY_FEC_READY_SHADOW, &s->dphy_fec_ready_shadow);
+	REG_GET(DP_DPHY_CNTL, DPHY_FEC_ACTIVE_STATUS, &s->dphy_fec_active_status);
+	REG_GET(DP_LINK_CNTL, DP_LINK_TRAINING_COMPLETE, &s->dp_link_training_complete);
+}
+
+static bool update_cfg_data(
+		struct dcn10_link_encoder *enc10,
+		const struct dc_link_settings *link_settings,
+		struct dpcssys_phy_seq_cfg *cfg)
+{
+	int i;
+
+	cfg->load_sram_fw = false;
+
+	for (i = 0; i < link_settings->lane_count; i++)
+		cfg->lane_en[i] = true;
+
+	switch (link_settings->link_rate) {
+	case LINK_RATE_LOW:
+		cfg->mpll_cfg = dcn2_mpll_cfg[0];
+		break;
+	case LINK_RATE_HIGH:
+		cfg->mpll_cfg = dcn2_mpll_cfg[1];
+		break;
+	case LINK_RATE_HIGH2:
+		cfg->mpll_cfg = dcn2_mpll_cfg[2];
+		break;
+	case LINK_RATE_HIGH3:
+		cfg->mpll_cfg = dcn2_mpll_cfg[3];
+		break;
+	default:
+		DC_LOG_ERROR("%s: No supported link rate found %X!\n",
+				__func__, link_settings->link_rate);
+		return false;
+	}
+
+	return true;
+}
+
+void dcn20_link_encoder_enable_dp_output(
+	struct link_encoder *enc,
+	const struct dc_link_settings *link_settings,
+	enum clock_source_id clock_source)
+{
+	struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
+	struct dcn20_link_encoder *enc20 = (struct dcn20_link_encoder *) enc10;
+	struct dpcssys_phy_seq_cfg *cfg = &enc20->phy_seq_cfg;
+
+	if (!enc->ctx->dc->debug.avoid_vbios_exec_table) {
+		dcn10_link_encoder_enable_dp_output(enc, link_settings, clock_source);
+		return;
+	}
+
+	if (!update_cfg_data(enc10, link_settings, cfg))
+		return;
+
+	enc1_configure_encoder(enc10, link_settings);
+
+	dcn10_link_encoder_setup(enc, SIGNAL_TYPE_DISPLAY_PORT);
+
+}
+
+void dcn20_link_encoder_get_max_link_cap(struct link_encoder *enc,
+	struct dc_link_settings *link_settings)
+{
+	struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
+	uint32_t is_in_usb_c_dp4_mode = 0;
+
+	dcn10_link_encoder_get_max_link_cap(enc, link_settings);
+
+	/* in usb c dp2 mode, max lane count is 2 */
+	if (enc->funcs->is_in_alt_mode && enc->funcs->is_in_alt_mode(enc)) {
+		REG_GET(RDPCSTX_PHY_CNTL6, RDPCS_PHY_DPALT_DP4, &is_in_usb_c_dp4_mode);
+		if (!is_in_usb_c_dp4_mode)
+			link_settings->lane_count = MIN(LANE_COUNT_TWO, link_settings->lane_count);
+	}
+
+}
+
+bool dcn20_link_encoder_is_in_alt_mode(struct link_encoder *enc)
+{
+	struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
+	uint32_t dp_alt_mode_disable = 0;
+	bool is_usb_c_alt_mode = false;
+
+	if (enc->features.flags.bits.DP_IS_USB_C) {
+		/* if value == 1 alt mode is disabled, otherwise it is enabled */
+		REG_GET(RDPCSTX_PHY_CNTL6, RDPCS_PHY_DPALT_DISABLE, &dp_alt_mode_disable);
+		is_usb_c_alt_mode = (dp_alt_mode_disable == 0);
+	}
+
+	return is_usb_c_alt_mode;
+}
+
+#define AUX_REG(reg)\
+	(enc10->aux_regs->reg)
+
+#define AUX_REG_READ(reg_name) \
+		dm_read_reg(CTX, AUX_REG(reg_name))
+
+#define AUX_REG_WRITE(reg_name, val) \
+			dm_write_reg(CTX, AUX_REG(reg_name), val)
+void enc2_hw_init(struct link_encoder *enc)
+{
+	struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
+/*
+	00 - DP_AUX_DPHY_RX_DETECTION_THRESHOLD__1to2 : 1/2
+	01 - DP_AUX_DPHY_RX_DETECTION_THRESHOLD__3to4 : 3/4
+	02 - DP_AUX_DPHY_RX_DETECTION_THRESHOLD__7to8 : 7/8
+	03 - DP_AUX_DPHY_RX_DETECTION_THRESHOLD__15to16 : 15/16
+	04 - DP_AUX_DPHY_RX_DETECTION_THRESHOLD__31to32 : 31/32
+	05 - DP_AUX_DPHY_RX_DETECTION_THRESHOLD__63to64 : 63/64
+	06 - DP_AUX_DPHY_RX_DETECTION_THRESHOLD__127to128 : 127/128
+	07 - DP_AUX_DPHY_RX_DETECTION_THRESHOLD__255to256 : 255/256
+*/
+
+/*
+	AUX_REG_UPDATE_5(AUX_DPHY_RX_CONTROL0,
+	AUX_RX_START_WINDOW = 1 [6:4]
+	AUX_RX_RECEIVE_WINDOW = 1 default is 2 [10:8]
+	AUX_RX_HALF_SYM_DETECT_LEN  = 1 [13:12] default is 1
+	AUX_RX_TRANSITION_FILTER_EN = 1 [16] default is 1
+	AUX_RX_ALLOW_BELOW_THRESHOLD_PHASE_DETECT [17] is 0  default is 0
+	AUX_RX_ALLOW_BELOW_THRESHOLD_START [18] is 1  default is 1
+	AUX_RX_ALLOW_BELOW_THRESHOLD_STOP [19] is 1  default is 1
+	AUX_RX_PHASE_DETECT_LEN,  [21,20] = 0x3 default is 3
+	AUX_RX_DETECTION_THRESHOLD [30:28] = 1
+*/
+	if (enc->ctx->dc_bios->golden_table.dc_golden_table_ver > 0) {
+		AUX_REG_WRITE(AUX_DPHY_RX_CONTROL0, enc->ctx->dc_bios->golden_table.aux_dphy_rx_control0_val);
+
+		AUX_REG_WRITE(AUX_DPHY_TX_CONTROL, enc->ctx->dc_bios->golden_table.aux_dphy_tx_control_val);
+
+		AUX_REG_WRITE(AUX_DPHY_RX_CONTROL1, enc->ctx->dc_bios->golden_table.aux_dphy_rx_control1_val);
+	} else {
+		AUX_REG_WRITE(AUX_DPHY_RX_CONTROL0, 0x103d1110);
+
+		AUX_REG_WRITE(AUX_DPHY_TX_CONTROL, 0x21c7a);
+	}
+
+	//AUX_DPHY_TX_REF_CONTROL'AUX_TX_REF_DIV HW default is 0x32;
+	// Set AUX_TX_REF_DIV Divider to generate 2 MHz reference from refclk
+	// 27MHz -> 0xd
+	// 100MHz -> 0x32
+	// 48MHz -> 0x18
+
+	// Set TMDS_CTL0 to 1.  This is a legacy setting.
+	REG_UPDATE(TMDS_CTL_BITS, TMDS_CTL0, 1);
+
+	dcn10_aux_initialize(enc10);
+}
+
+static const struct link_encoder_funcs dcn20_link_enc_funcs = {
+	.read_state = link_enc2_read_state,
+	.validate_output_with_stream =
+		dcn10_link_encoder_validate_output_with_stream,
+	.hw_init = enc2_hw_init,
+	.setup = dcn10_link_encoder_setup,
+	.enable_tmds_output = dcn10_link_encoder_enable_tmds_output_with_clk_pattern_wa,
+	.enable_dp_output = dcn20_link_encoder_enable_dp_output,
+	.enable_dp_mst_output = dcn10_link_encoder_enable_dp_mst_output,
+	.disable_output = dcn10_link_encoder_disable_output,
+	.dp_set_lane_settings = dcn10_link_encoder_dp_set_lane_settings,
+	.dp_set_phy_pattern = dcn10_link_encoder_dp_set_phy_pattern,
+	.update_mst_stream_allocation_table =
+		dcn10_link_encoder_update_mst_stream_allocation_table,
+	.psr_program_dp_dphy_fast_training =
+			dcn10_psr_program_dp_dphy_fast_training,
+	.psr_program_secondary_packet = dcn10_psr_program_secondary_packet,
+	.connect_dig_be_to_fe = dcn10_link_encoder_connect_dig_be_to_fe,
+	.enable_hpd = dcn10_link_encoder_enable_hpd,
+	.disable_hpd = dcn10_link_encoder_disable_hpd,
+	.is_dig_enabled = dcn10_is_dig_enabled,
+	.destroy = dcn10_link_encoder_destroy,
+	.fec_set_enable = enc2_fec_set_enable,
+	.fec_set_ready = enc2_fec_set_ready,
+	.fec_is_active = enc2_fec_is_active,
+	.get_dig_mode = dcn10_get_dig_mode,
+	.get_dig_frontend = dcn10_get_dig_frontend,
+	.is_in_alt_mode = dcn20_link_encoder_is_in_alt_mode,
+	.get_max_link_cap = dcn20_link_encoder_get_max_link_cap,
+};
+
+void dcn20_link_encoder_construct(
+	struct dcn20_link_encoder *enc20,
+	const struct encoder_init_data *init_data,
+	const struct encoder_feature_support *enc_features,
+	const struct dcn10_link_enc_registers *link_regs,
+	const struct dcn10_link_enc_aux_registers *aux_regs,
+	const struct dcn10_link_enc_hpd_registers *hpd_regs,
+	const struct dcn10_link_enc_shift *link_shift,
+	const struct dcn10_link_enc_mask *link_mask)
+{
+	struct bp_encoder_cap_info bp_cap_info = {0};
+	const struct dc_vbios_funcs *bp_funcs = init_data->ctx->dc_bios->funcs;
+	enum bp_result result = BP_RESULT_OK;
+	struct dcn10_link_encoder *enc10 = &enc20->enc10;
+
+	enc10->base.funcs = &dcn20_link_enc_funcs;
+	enc10->base.ctx = init_data->ctx;
+	enc10->base.id = init_data->encoder;
+
+	enc10->base.hpd_source = init_data->hpd_source;
+	enc10->base.connector = init_data->connector;
+
+	enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
+
+	enc10->base.features = *enc_features;
+
+	enc10->base.transmitter = init_data->transmitter;
+
+	/* set the flag to indicate whether driver poll the I2C data pin
+	 * while doing the DP sink detect
+	 */
+
+/*	if (dal_adapter_service_is_feature_supported(as,
+		FEATURE_DP_SINK_DETECT_POLL_DATA_PIN))
+		enc10->base.features.flags.bits.
+			DP_SINK_DETECT_POLL_DATA_PIN = true;*/
+
+	enc10->base.output_signals =
+		SIGNAL_TYPE_DVI_SINGLE_LINK |
+		SIGNAL_TYPE_DVI_DUAL_LINK |
+		SIGNAL_TYPE_LVDS |
+		SIGNAL_TYPE_DISPLAY_PORT |
+		SIGNAL_TYPE_DISPLAY_PORT_MST |
+		SIGNAL_TYPE_EDP |
+		SIGNAL_TYPE_HDMI_TYPE_A;
+
+	/* For DCE 8.0 and 8.1, by design, UNIPHY is hardwired to DIG_BE.
+	 * SW always assign DIG_FE 1:1 mapped to DIG_FE for non-MST UNIPHY.
+	 * SW assign DIG_FE to non-MST UNIPHY first and MST last. So prefer
+	 * DIG is per UNIPHY and used by SST DP, eDP, HDMI, DVI and LVDS.
+	 * Prefer DIG assignment is decided by board design.
+	 * For DCE 8.0, there are only max 6 UNIPHYs, we assume board design
+	 * and VBIOS will filter out 7 UNIPHY for DCE 8.0.
+	 * By this, adding DIGG should not hurt DCE 8.0.
+	 * This will let DCE 8.1 share DCE 8.0 as much as possible
+	 */
+
+	enc10->link_regs = link_regs;
+	enc10->aux_regs = aux_regs;
+	enc10->hpd_regs = hpd_regs;
+	enc10->link_shift = link_shift;
+	enc10->link_mask = link_mask;
+
+	switch (enc10->base.transmitter) {
+	case TRANSMITTER_UNIPHY_A:
+		enc10->base.preferred_engine = ENGINE_ID_DIGA;
+	break;
+	case TRANSMITTER_UNIPHY_B:
+		enc10->base.preferred_engine = ENGINE_ID_DIGB;
+	break;
+	case TRANSMITTER_UNIPHY_C:
+		enc10->base.preferred_engine = ENGINE_ID_DIGC;
+	break;
+	case TRANSMITTER_UNIPHY_D:
+		enc10->base.preferred_engine = ENGINE_ID_DIGD;
+	break;
+	case TRANSMITTER_UNIPHY_E:
+		enc10->base.preferred_engine = ENGINE_ID_DIGE;
+	break;
+	case TRANSMITTER_UNIPHY_F:
+		enc10->base.preferred_engine = ENGINE_ID_DIGF;
+	break;
+	case TRANSMITTER_UNIPHY_G:
+		enc10->base.preferred_engine = ENGINE_ID_DIGG;
+	break;
+	default:
+		ASSERT_CRITICAL(false);
+		enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
+	}
+
+	/* default to one to mirror Windows behavior */
+	enc10->base.features.flags.bits.HDMI_6GB_EN = 1;
+
+	result = bp_funcs->get_encoder_cap_info(enc10->base.ctx->dc_bios,
+						enc10->base.id, &bp_cap_info);
+
+	/* Override features with DCE-specific values */
+	if (result == BP_RESULT_OK) {
+		enc10->base.features.flags.bits.IS_HBR2_CAPABLE =
+				bp_cap_info.DP_HBR2_EN;
+		enc10->base.features.flags.bits.IS_HBR3_CAPABLE =
+				bp_cap_info.DP_HBR3_EN;
+		enc10->base.features.flags.bits.HDMI_6GB_EN = bp_cap_info.HDMI_6GB_EN;
+		enc10->base.features.flags.bits.DP_IS_USB_C =
+				bp_cap_info.DP_IS_USB_C;
+	} else {
+		DC_LOG_WARNING("%s: Failed to get encoder_cap_info from VBIOS with error code %d!\n",
+				__func__,
+				result);
+	}
+	if (enc10->base.ctx->dc->debug.hdmi20_disable) {
+		enc10->base.features.flags.bits.HDMI_6GB_EN = 0;
+	}
+}