Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 817 insertions, 0 deletions

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c
new file mode 100644
index 000000000..b37d14369
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c
@@ -0,0 +1,817 @@
+/*
+ * Copyright 2019-2021 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#include "resource.h"
+#include "clk_mgr.h"
+#include "dcn31/dcn31_resource.h"
+#include "dcn315/dcn315_resource.h"
+#include "dcn316/dcn316_resource.h"
+
+#include "dml/dcn20/dcn20_fpu.h"
+#include "dcn31_fpu.h"
+
+/**
+ * DOC: DCN31x FPU manipulation Overview
+ *
+ * The DCN architecture relies on FPU operations, which require special
+ * compilation flags and the use of kernel_fpu_begin/end functions; ideally, we
+ * want to avoid spreading FPU access across multiple files. With this idea in
+ * mind, this file aims to centralize all DCN3.1.x functions that require FPU
+ * access in a single place. Code in this file follows the following code
+ * pattern:
+ *
+ * 1. Functions that use FPU operations should be isolated in static functions.
+ * 2. The FPU functions should have the noinline attribute to ensure anything
+ *    that deals with FP register is contained within this call.
+ * 3. All function that needs to be accessed outside this file requires a
+ *    public interface that not uses any FPU reference.
+ * 4. Developers **must not** use DC_FP_START/END in this file, but they need
+ *    to ensure that the caller invokes it before access any function available
+ *    in this file. For this reason, public functions in this file must invoke
+ *    dc_assert_fp_enabled();
+ */
+
+struct _vcs_dpi_ip_params_st dcn3_1_ip = {
+	.gpuvm_enable = 1,
+	.gpuvm_max_page_table_levels = 1,
+	.hostvm_enable = 1,
+	.hostvm_max_page_table_levels = 2,
+	.rob_buffer_size_kbytes = 64,
+	.det_buffer_size_kbytes = DCN3_1_DEFAULT_DET_SIZE,
+	.config_return_buffer_size_in_kbytes = 1792,
+	.compressed_buffer_segment_size_in_kbytes = 64,
+	.meta_fifo_size_in_kentries = 32,
+	.zero_size_buffer_entries = 512,
+	.compbuf_reserved_space_64b = 256,
+	.compbuf_reserved_space_zs = 64,
+	.dpp_output_buffer_pixels = 2560,
+	.opp_output_buffer_lines = 1,
+	.pixel_chunk_size_kbytes = 8,
+	.meta_chunk_size_kbytes = 2,
+	.min_meta_chunk_size_bytes = 256,
+	.writeback_chunk_size_kbytes = 8,
+	.ptoi_supported = false,
+	.num_dsc = 3,
+	.maximum_dsc_bits_per_component = 10,
+	.dsc422_native_support = false,
+	.is_line_buffer_bpp_fixed = true,
+	.line_buffer_fixed_bpp = 48,
+	.line_buffer_size_bits = 789504,
+	.max_line_buffer_lines = 12,
+	.writeback_interface_buffer_size_kbytes = 90,
+	.max_num_dpp = 4,
+	.max_num_otg = 4,
+	.max_num_hdmi_frl_outputs = 1,
+	.max_num_wb = 1,
+	.max_dchub_pscl_bw_pix_per_clk = 4,
+	.max_pscl_lb_bw_pix_per_clk = 2,
+	.max_lb_vscl_bw_pix_per_clk = 4,
+	.max_vscl_hscl_bw_pix_per_clk = 4,
+	.max_hscl_ratio = 6,
+	.max_vscl_ratio = 6,
+	.max_hscl_taps = 8,
+	.max_vscl_taps = 8,
+	.dpte_buffer_size_in_pte_reqs_luma = 64,
+	.dpte_buffer_size_in_pte_reqs_chroma = 34,
+	.dispclk_ramp_margin_percent = 1,
+	.max_inter_dcn_tile_repeaters = 8,
+	.cursor_buffer_size = 16,
+	.cursor_chunk_size = 2,
+	.writeback_line_buffer_buffer_size = 0,
+	.writeback_min_hscl_ratio = 1,
+	.writeback_min_vscl_ratio = 1,
+	.writeback_max_hscl_ratio = 1,
+	.writeback_max_vscl_ratio = 1,
+	.writeback_max_hscl_taps = 1,
+	.writeback_max_vscl_taps = 1,
+	.dppclk_delay_subtotal = 46,
+	.dppclk_delay_scl = 50,
+	.dppclk_delay_scl_lb_only = 16,
+	.dppclk_delay_cnvc_formatter = 27,
+	.dppclk_delay_cnvc_cursor = 6,
+	.dispclk_delay_subtotal = 119,
+	.dynamic_metadata_vm_enabled = false,
+	.odm_combine_4to1_supported = false,
+	.dcc_supported = true,
+};
+
+static struct _vcs_dpi_soc_bounding_box_st dcn3_1_soc = {
+		/*TODO: correct dispclk/dppclk voltage level determination*/
+	.clock_limits = {
+		{
+			.state = 0,
+			.dispclk_mhz = 1200.0,
+			.dppclk_mhz = 1200.0,
+			.phyclk_mhz = 600.0,
+			.phyclk_d18_mhz = 667.0,
+			.dscclk_mhz = 186.0,
+			.dtbclk_mhz = 625.0,
+		},
+		{
+			.state = 1,
+			.dispclk_mhz = 1200.0,
+			.dppclk_mhz = 1200.0,
+			.phyclk_mhz = 810.0,
+			.phyclk_d18_mhz = 667.0,
+			.dscclk_mhz = 209.0,
+			.dtbclk_mhz = 625.0,
+		},
+		{
+			.state = 2,
+			.dispclk_mhz = 1200.0,
+			.dppclk_mhz = 1200.0,
+			.phyclk_mhz = 810.0,
+			.phyclk_d18_mhz = 667.0,
+			.dscclk_mhz = 209.0,
+			.dtbclk_mhz = 625.0,
+		},
+		{
+			.state = 3,
+			.dispclk_mhz = 1200.0,
+			.dppclk_mhz = 1200.0,
+			.phyclk_mhz = 810.0,
+			.phyclk_d18_mhz = 667.0,
+			.dscclk_mhz = 371.0,
+			.dtbclk_mhz = 625.0,
+		},
+		{
+			.state = 4,
+			.dispclk_mhz = 1200.0,
+			.dppclk_mhz = 1200.0,
+			.phyclk_mhz = 810.0,
+			.phyclk_d18_mhz = 667.0,
+			.dscclk_mhz = 417.0,
+			.dtbclk_mhz = 625.0,
+		},
+	},
+	.num_states = 5,
+	.sr_exit_time_us = 9.0,
+	.sr_enter_plus_exit_time_us = 11.0,
+	.sr_exit_z8_time_us = 442.0,
+	.sr_enter_plus_exit_z8_time_us = 560.0,
+	.writeback_latency_us = 12.0,
+	.dram_channel_width_bytes = 4,
+	.round_trip_ping_latency_dcfclk_cycles = 106,
+	.urgent_latency_pixel_data_only_us = 4.0,
+	.urgent_latency_pixel_mixed_with_vm_data_us = 4.0,
+	.urgent_latency_vm_data_only_us = 4.0,
+	.urgent_out_of_order_return_per_channel_pixel_only_bytes = 4096,
+	.urgent_out_of_order_return_per_channel_pixel_and_vm_bytes = 4096,
+	.urgent_out_of_order_return_per_channel_vm_only_bytes = 4096,
+	.pct_ideal_sdp_bw_after_urgent = 80.0,
+	.pct_ideal_dram_sdp_bw_after_urgent_pixel_only = 65.0,
+	.pct_ideal_dram_sdp_bw_after_urgent_pixel_and_vm = 60.0,
+	.pct_ideal_dram_sdp_bw_after_urgent_vm_only = 30.0,
+	.max_avg_sdp_bw_use_normal_percent = 60.0,
+	.max_avg_dram_bw_use_normal_percent = 60.0,
+	.fabric_datapath_to_dcn_data_return_bytes = 32,
+	.return_bus_width_bytes = 64,
+	.downspread_percent = 0.38,
+	.dcn_downspread_percent = 0.5,
+	.gpuvm_min_page_size_bytes = 4096,
+	.hostvm_min_page_size_bytes = 4096,
+	.do_urgent_latency_adjustment = false,
+	.urgent_latency_adjustment_fabric_clock_component_us = 0,
+	.urgent_latency_adjustment_fabric_clock_reference_mhz = 0,
+};
+
+struct _vcs_dpi_ip_params_st dcn3_15_ip = {
+	.gpuvm_enable = 1,
+	.gpuvm_max_page_table_levels = 1,
+	.hostvm_enable = 1,
+	.hostvm_max_page_table_levels = 2,
+	.rob_buffer_size_kbytes = 64,
+	.det_buffer_size_kbytes = DCN3_15_DEFAULT_DET_SIZE,
+	.min_comp_buffer_size_kbytes = 64,
+	.config_return_buffer_size_in_kbytes = 1024,
+	.compressed_buffer_segment_size_in_kbytes = 64,
+	.meta_fifo_size_in_kentries = 32,
+	.zero_size_buffer_entries = 512,
+	.compbuf_reserved_space_64b = 256,
+	.compbuf_reserved_space_zs = 64,
+	.dpp_output_buffer_pixels = 2560,
+	.opp_output_buffer_lines = 1,
+	.pixel_chunk_size_kbytes = 8,
+	.meta_chunk_size_kbytes = 2,
+	.min_meta_chunk_size_bytes = 256,
+	.writeback_chunk_size_kbytes = 8,
+	.ptoi_supported = false,
+	.num_dsc = 3,
+	.maximum_dsc_bits_per_component = 10,
+	.dsc422_native_support = false,
+	.is_line_buffer_bpp_fixed = true,
+	.line_buffer_fixed_bpp = 49,
+	.line_buffer_size_bits = 789504,
+	.max_line_buffer_lines = 12,
+	.writeback_interface_buffer_size_kbytes = 90,
+	.max_num_dpp = 4,
+	.max_num_otg = 4,
+	.max_num_hdmi_frl_outputs = 1,
+	.max_num_wb = 1,
+	.max_dchub_pscl_bw_pix_per_clk = 4,
+	.max_pscl_lb_bw_pix_per_clk = 2,
+	.max_lb_vscl_bw_pix_per_clk = 4,
+	.max_vscl_hscl_bw_pix_per_clk = 4,
+	.max_hscl_ratio = 6,
+	.max_vscl_ratio = 6,
+	.max_hscl_taps = 8,
+	.max_vscl_taps = 8,
+	.dpte_buffer_size_in_pte_reqs_luma = 64,
+	.dpte_buffer_size_in_pte_reqs_chroma = 34,
+	.dispclk_ramp_margin_percent = 1,
+	.max_inter_dcn_tile_repeaters = 9,
+	.cursor_buffer_size = 16,
+	.cursor_chunk_size = 2,
+	.writeback_line_buffer_buffer_size = 0,
+	.writeback_min_hscl_ratio = 1,
+	.writeback_min_vscl_ratio = 1,
+	.writeback_max_hscl_ratio = 1,
+	.writeback_max_vscl_ratio = 1,
+	.writeback_max_hscl_taps = 1,
+	.writeback_max_vscl_taps = 1,
+	.dppclk_delay_subtotal = 46,
+	.dppclk_delay_scl = 50,
+	.dppclk_delay_scl_lb_only = 16,
+	.dppclk_delay_cnvc_formatter = 27,
+	.dppclk_delay_cnvc_cursor = 6,
+	.dispclk_delay_subtotal = 119,
+	.dynamic_metadata_vm_enabled = false,
+	.odm_combine_4to1_supported = false,
+	.dcc_supported = true,
+};
+
+static struct _vcs_dpi_soc_bounding_box_st dcn3_15_soc = {
+	.sr_exit_time_us = 9.0,
+	.sr_enter_plus_exit_time_us = 11.0,
+	.sr_exit_z8_time_us = 50.0,
+	.sr_enter_plus_exit_z8_time_us = 50.0,
+	.writeback_latency_us = 12.0,
+	.dram_channel_width_bytes = 4,
+	.round_trip_ping_latency_dcfclk_cycles = 106,
+	.urgent_latency_pixel_data_only_us = 4.0,
+	.urgent_latency_pixel_mixed_with_vm_data_us = 4.0,
+	.urgent_latency_vm_data_only_us = 4.0,
+	.urgent_out_of_order_return_per_channel_pixel_only_bytes = 4096,
+	.urgent_out_of_order_return_per_channel_pixel_and_vm_bytes = 4096,
+	.urgent_out_of_order_return_per_channel_vm_only_bytes = 4096,
+	.pct_ideal_sdp_bw_after_urgent = 80.0,
+	.pct_ideal_dram_sdp_bw_after_urgent_pixel_only = 65.0,
+	.pct_ideal_dram_sdp_bw_after_urgent_pixel_and_vm = 60.0,
+	.pct_ideal_dram_sdp_bw_after_urgent_vm_only = 30.0,
+	.max_avg_sdp_bw_use_normal_percent = 60.0,
+	.max_avg_dram_bw_use_normal_percent = 60.0,
+	.fabric_datapath_to_dcn_data_return_bytes = 32,
+	.return_bus_width_bytes = 64,
+	.downspread_percent = 0.38,
+	.dcn_downspread_percent = 0.38,
+	.gpuvm_min_page_size_bytes = 4096,
+	.hostvm_min_page_size_bytes = 4096,
+	.do_urgent_latency_adjustment = false,
+	.urgent_latency_adjustment_fabric_clock_component_us = 0,
+	.urgent_latency_adjustment_fabric_clock_reference_mhz = 0,
+	.num_chans = 4,
+	.dummy_pstate_latency_us = 10.0
+};
+
+struct _vcs_dpi_ip_params_st dcn3_16_ip = {
+	.gpuvm_enable = 1,
+	.gpuvm_max_page_table_levels = 1,
+	.hostvm_enable = 1,
+	.hostvm_max_page_table_levels = 2,
+	.rob_buffer_size_kbytes = 64,
+	.det_buffer_size_kbytes = DCN3_16_DEFAULT_DET_SIZE,
+	.min_comp_buffer_size_kbytes = 64,
+	.config_return_buffer_size_in_kbytes = 1024,
+	.compressed_buffer_segment_size_in_kbytes = 64,
+	.meta_fifo_size_in_kentries = 32,
+	.zero_size_buffer_entries = 512,
+	.compbuf_reserved_space_64b = 256,
+	.compbuf_reserved_space_zs = 64,
+	.dpp_output_buffer_pixels = 2560,
+	.opp_output_buffer_lines = 1,
+	.pixel_chunk_size_kbytes = 8,
+	.meta_chunk_size_kbytes = 2,
+	.min_meta_chunk_size_bytes = 256,
+	.writeback_chunk_size_kbytes = 8,
+	.ptoi_supported = false,
+	.num_dsc = 3,
+	.maximum_dsc_bits_per_component = 10,
+	.dsc422_native_support = false,
+	.is_line_buffer_bpp_fixed = true,
+	.line_buffer_fixed_bpp = 48,
+	.line_buffer_size_bits = 789504,
+	.max_line_buffer_lines = 12,
+	.writeback_interface_buffer_size_kbytes = 90,
+	.max_num_dpp = 4,
+	.max_num_otg = 4,
+	.max_num_hdmi_frl_outputs = 1,
+	.max_num_wb = 1,
+	.max_dchub_pscl_bw_pix_per_clk = 4,
+	.max_pscl_lb_bw_pix_per_clk = 2,
+	.max_lb_vscl_bw_pix_per_clk = 4,
+	.max_vscl_hscl_bw_pix_per_clk = 4,
+	.max_hscl_ratio = 6,
+	.max_vscl_ratio = 6,
+	.max_hscl_taps = 8,
+	.max_vscl_taps = 8,
+	.dpte_buffer_size_in_pte_reqs_luma = 64,
+	.dpte_buffer_size_in_pte_reqs_chroma = 34,
+	.dispclk_ramp_margin_percent = 1,
+	.max_inter_dcn_tile_repeaters = 8,
+	.cursor_buffer_size = 16,
+	.cursor_chunk_size = 2,
+	.writeback_line_buffer_buffer_size = 0,
+	.writeback_min_hscl_ratio = 1,
+	.writeback_min_vscl_ratio = 1,
+	.writeback_max_hscl_ratio = 1,
+	.writeback_max_vscl_ratio = 1,
+	.writeback_max_hscl_taps = 1,
+	.writeback_max_vscl_taps = 1,
+	.dppclk_delay_subtotal = 46,
+	.dppclk_delay_scl = 50,
+	.dppclk_delay_scl_lb_only = 16,
+	.dppclk_delay_cnvc_formatter = 27,
+	.dppclk_delay_cnvc_cursor = 6,
+	.dispclk_delay_subtotal = 119,
+	.dynamic_metadata_vm_enabled = false,
+	.odm_combine_4to1_supported = false,
+	.dcc_supported = true,
+};
+
+static struct _vcs_dpi_soc_bounding_box_st dcn3_16_soc = {
+		/*TODO: correct dispclk/dppclk voltage level determination*/
+	.clock_limits = {
+		{
+			.state = 0,
+			.dispclk_mhz = 556.0,
+			.dppclk_mhz = 556.0,
+			.phyclk_mhz = 600.0,
+			.phyclk_d18_mhz = 445.0,
+			.dscclk_mhz = 186.0,
+			.dtbclk_mhz = 625.0,
+		},
+		{
+			.state = 1,
+			.dispclk_mhz = 625.0,
+			.dppclk_mhz = 625.0,
+			.phyclk_mhz = 810.0,
+			.phyclk_d18_mhz = 667.0,
+			.dscclk_mhz = 209.0,
+			.dtbclk_mhz = 625.0,
+		},
+		{
+			.state = 2,
+			.dispclk_mhz = 625.0,
+			.dppclk_mhz = 625.0,
+			.phyclk_mhz = 810.0,
+			.phyclk_d18_mhz = 667.0,
+			.dscclk_mhz = 209.0,
+			.dtbclk_mhz = 625.0,
+		},
+		{
+			.state = 3,
+			.dispclk_mhz = 1112.0,
+			.dppclk_mhz = 1112.0,
+			.phyclk_mhz = 810.0,
+			.phyclk_d18_mhz = 667.0,
+			.dscclk_mhz = 371.0,
+			.dtbclk_mhz = 625.0,
+		},
+		{
+			.state = 4,
+			.dispclk_mhz = 1250.0,
+			.dppclk_mhz = 1250.0,
+			.phyclk_mhz = 810.0,
+			.phyclk_d18_mhz = 667.0,
+			.dscclk_mhz = 417.0,
+			.dtbclk_mhz = 625.0,
+		},
+	},
+	.num_states = 5,
+	.sr_exit_time_us = 9.0,
+	.sr_enter_plus_exit_time_us = 11.0,
+	.sr_exit_z8_time_us = 442.0,
+	.sr_enter_plus_exit_z8_time_us = 560.0,
+	.writeback_latency_us = 12.0,
+	.dram_channel_width_bytes = 4,
+	.round_trip_ping_latency_dcfclk_cycles = 106,
+	.urgent_latency_pixel_data_only_us = 4.0,
+	.urgent_latency_pixel_mixed_with_vm_data_us = 4.0,
+	.urgent_latency_vm_data_only_us = 4.0,
+	.urgent_out_of_order_return_per_channel_pixel_only_bytes = 4096,
+	.urgent_out_of_order_return_per_channel_pixel_and_vm_bytes = 4096,
+	.urgent_out_of_order_return_per_channel_vm_only_bytes = 4096,
+	.pct_ideal_sdp_bw_after_urgent = 80.0,
+	.pct_ideal_dram_sdp_bw_after_urgent_pixel_only = 65.0,
+	.pct_ideal_dram_sdp_bw_after_urgent_pixel_and_vm = 60.0,
+	.pct_ideal_dram_sdp_bw_after_urgent_vm_only = 30.0,
+	.max_avg_sdp_bw_use_normal_percent = 60.0,
+	.max_avg_dram_bw_use_normal_percent = 60.0,
+	.fabric_datapath_to_dcn_data_return_bytes = 32,
+	.return_bus_width_bytes = 64,
+	.downspread_percent = 0.38,
+	.dcn_downspread_percent = 0.5,
+	.gpuvm_min_page_size_bytes = 4096,
+	.hostvm_min_page_size_bytes = 4096,
+	.do_urgent_latency_adjustment = false,
+	.urgent_latency_adjustment_fabric_clock_component_us = 0,
+	.urgent_latency_adjustment_fabric_clock_reference_mhz = 0,
+};
+
+void dcn31_zero_pipe_dcc_fraction(display_e2e_pipe_params_st *pipes,
+				  int pipe_cnt)
+{
+	dc_assert_fp_enabled();
+
+	pipes[pipe_cnt].pipe.src.dcc_fraction_of_zs_req_luma = 0;
+	pipes[pipe_cnt].pipe.src.dcc_fraction_of_zs_req_chroma = 0;
+}
+
+void dcn31_update_soc_for_wm_a(struct dc *dc, struct dc_state *context)
+{
+	dc_assert_fp_enabled();
+
+	if (dc->clk_mgr->bw_params->wm_table.entries[WM_A].valid) {
+		context->bw_ctx.dml.soc.dram_clock_change_latency_us = dc->clk_mgr->bw_params->wm_table.entries[WM_A].pstate_latency_us;
+		context->bw_ctx.dml.soc.sr_enter_plus_exit_time_us = dc->clk_mgr->bw_params->wm_table.entries[WM_A].sr_enter_plus_exit_time_us;
+		context->bw_ctx.dml.soc.sr_exit_time_us = dc->clk_mgr->bw_params->wm_table.entries[WM_A].sr_exit_time_us;
+	}
+}
+
+void dcn315_update_soc_for_wm_a(struct dc *dc, struct dc_state *context)
+{
+	dc_assert_fp_enabled();
+
+	if (dc->clk_mgr->bw_params->wm_table.entries[WM_A].valid) {
+		/* For 315 pstate change is only supported if possible in vactive */
+		if (context->bw_ctx.dml.vba.DRAMClockChangeSupport[context->bw_ctx.dml.vba.VoltageLevel][context->bw_ctx.dml.vba.maxMpcComb] != dm_dram_clock_change_vactive)
+			context->bw_ctx.dml.soc.dram_clock_change_latency_us = context->bw_ctx.dml.soc.dummy_pstate_latency_us;
+		else
+			context->bw_ctx.dml.soc.dram_clock_change_latency_us = dc->clk_mgr->bw_params->wm_table.entries[WM_A].pstate_latency_us;
+		context->bw_ctx.dml.soc.sr_enter_plus_exit_time_us =
+				dc->clk_mgr->bw_params->wm_table.entries[WM_A].sr_enter_plus_exit_time_us;
+		context->bw_ctx.dml.soc.sr_exit_time_us =
+				dc->clk_mgr->bw_params->wm_table.entries[WM_A].sr_exit_time_us;
+	}
+}
+
+void dcn31_calculate_wm_and_dlg_fp(
+		struct dc *dc, struct dc_state *context,
+		display_e2e_pipe_params_st *pipes,
+		int pipe_cnt,
+		int vlevel)
+{
+	int i, pipe_idx, active_hubp_count = 0;
+	double dcfclk = context->bw_ctx.dml.vba.DCFCLKState[vlevel][context->bw_ctx.dml.vba.maxMpcComb];
+
+	dc_assert_fp_enabled();
+
+	if (context->bw_ctx.dml.soc.min_dcfclk > dcfclk)
+		dcfclk = context->bw_ctx.dml.soc.min_dcfclk;
+
+	/* We don't recalculate clocks for 0 pipe configs, which can block
+	 * S0i3 as high clocks will block low power states
+	 * Override any clocks that can block S0i3 to min here
+	 */
+	if (pipe_cnt == 0) {
+		context->bw_ctx.bw.dcn.clk.dcfclk_khz = dcfclk; // always should be vlevel 0
+		return;
+	}
+
+	pipes[0].clks_cfg.voltage = vlevel;
+	pipes[0].clks_cfg.dcfclk_mhz = dcfclk;
+	pipes[0].clks_cfg.socclk_mhz = context->bw_ctx.dml.soc.clock_limits[vlevel].socclk_mhz;
+
+	/* Set A:
+	 * All clocks min required
+	 *
+	 * Set A calculated last so that following calculations are based on Set A
+	 */
+	dc->res_pool->funcs->update_soc_for_wm_a(dc, context);
+	context->bw_ctx.bw.dcn.watermarks.a.urgent_ns = get_wm_urgent(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+	context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.cstate_enter_plus_exit_ns = get_wm_stutter_enter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+	context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.cstate_exit_ns = get_wm_stutter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+	context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.pstate_change_ns = get_wm_dram_clock_change(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+	context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.cstate_enter_plus_exit_z8_ns = get_wm_z8_stutter_enter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+	context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.cstate_exit_z8_ns = get_wm_z8_stutter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+	context->bw_ctx.bw.dcn.watermarks.a.pte_meta_urgent_ns = get_wm_memory_trip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+	context->bw_ctx.bw.dcn.watermarks.a.frac_urg_bw_nom = get_fraction_of_urgent_bandwidth(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+	context->bw_ctx.bw.dcn.watermarks.a.frac_urg_bw_flip = get_fraction_of_urgent_bandwidth_imm_flip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+	context->bw_ctx.bw.dcn.watermarks.a.urgent_latency_ns = get_urgent_latency(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+	context->bw_ctx.bw.dcn.watermarks.b = context->bw_ctx.bw.dcn.watermarks.a;
+	context->bw_ctx.bw.dcn.watermarks.c = context->bw_ctx.bw.dcn.watermarks.a;
+	context->bw_ctx.bw.dcn.watermarks.d = context->bw_ctx.bw.dcn.watermarks.a;
+
+	for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) {
+		if (!context->res_ctx.pipe_ctx[i].stream)
+			continue;
+
+		if (context->res_ctx.pipe_ctx[i].plane_state)
+			active_hubp_count++;
+
+		pipes[pipe_idx].clks_cfg.dispclk_mhz = get_dispclk_calculated(&context->bw_ctx.dml, pipes, pipe_cnt);
+		pipes[pipe_idx].clks_cfg.dppclk_mhz = get_dppclk_calculated(&context->bw_ctx.dml, pipes, pipe_cnt, pipe_idx);
+
+		if (dc->config.forced_clocks || dc->debug.max_disp_clk) {
+			pipes[pipe_idx].clks_cfg.dispclk_mhz = context->bw_ctx.dml.soc.clock_limits[0].dispclk_mhz;
+			pipes[pipe_idx].clks_cfg.dppclk_mhz = context->bw_ctx.dml.soc.clock_limits[0].dppclk_mhz;
+		}
+		if (dc->debug.min_disp_clk_khz > pipes[pipe_idx].clks_cfg.dispclk_mhz * 1000)
+			pipes[pipe_idx].clks_cfg.dispclk_mhz = dc->debug.min_disp_clk_khz / 1000.0;
+		if (dc->debug.min_dpp_clk_khz > pipes[pipe_idx].clks_cfg.dppclk_mhz * 1000)
+			pipes[pipe_idx].clks_cfg.dppclk_mhz = dc->debug.min_dpp_clk_khz / 1000.0;
+
+		pipe_idx++;
+	}
+
+	dcn20_calculate_dlg_params(dc, context, pipes, pipe_cnt, vlevel);
+	/* For 31x apu pstate change is only supported if possible in vactive*/
+	context->bw_ctx.bw.dcn.clk.p_state_change_support =
+			context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][context->bw_ctx.dml.vba.maxMpcComb] == dm_dram_clock_change_vactive;
+	/* If DCN isn't making memory requests we can allow pstate change and lower clocks */
+	if (!active_hubp_count) {
+		context->bw_ctx.bw.dcn.clk.socclk_khz = 0;
+		context->bw_ctx.bw.dcn.clk.dppclk_khz = 0;
+		context->bw_ctx.bw.dcn.clk.dcfclk_khz = 0;
+		context->bw_ctx.bw.dcn.clk.dcfclk_deep_sleep_khz = 0;
+		context->bw_ctx.bw.dcn.clk.dramclk_khz = 0;
+		context->bw_ctx.bw.dcn.clk.fclk_khz = 0;
+		context->bw_ctx.bw.dcn.clk.p_state_change_support = true;
+		for (i = 0; i < dc->res_pool->pipe_count; i++)
+			if (context->res_ctx.pipe_ctx[i].stream)
+				context->res_ctx.pipe_ctx[i].plane_res.bw.dppclk_khz = 0;
+	}
+}
+
+void dcn31_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_params)
+{
+	struct _vcs_dpi_voltage_scaling_st *s = dc->scratch.update_bw_bounding_box.clock_limits;
+	struct clk_limit_table *clk_table = &bw_params->clk_table;
+	unsigned int i, closest_clk_lvl;
+	int j;
+
+	dc_assert_fp_enabled();
+
+	memcpy(s, dcn3_1_soc.clock_limits, sizeof(dcn3_1_soc.clock_limits));
+
+	// Default clock levels are used for diags, which may lead to overclocking.
+	if (!IS_DIAG_DC(dc->ctx->dce_environment)) {
+		int max_dispclk_mhz = 0, max_dppclk_mhz = 0;
+
+		dcn3_1_ip.max_num_otg = dc->res_pool->res_cap->num_timing_generator;
+		dcn3_1_ip.max_num_dpp = dc->res_pool->pipe_count;
+		dcn3_1_soc.num_chans = bw_params->num_channels;
+
+		ASSERT(clk_table->num_entries);
+
+		/* Prepass to find max clocks independent of voltage level. */
+		for (i = 0; i < clk_table->num_entries; ++i) {
+			if (clk_table->entries[i].dispclk_mhz > max_dispclk_mhz)
+				max_dispclk_mhz = clk_table->entries[i].dispclk_mhz;
+			if (clk_table->entries[i].dppclk_mhz > max_dppclk_mhz)
+				max_dppclk_mhz = clk_table->entries[i].dppclk_mhz;
+		}
+
+		for (i = 0; i < clk_table->num_entries; i++) {
+			/* loop backwards*/
+			for (closest_clk_lvl = 0, j = dcn3_1_soc.num_states - 1; j >= 0; j--) {
+				if ((unsigned int) dcn3_1_soc.clock_limits[j].dcfclk_mhz <= clk_table->entries[i].dcfclk_mhz) {
+					closest_clk_lvl = j;
+					break;
+				}
+			}
+
+			s[i].state = i;
+
+			/* Clocks dependent on voltage level. */
+			s[i].dcfclk_mhz = clk_table->entries[i].dcfclk_mhz;
+			s[i].fabricclk_mhz = clk_table->entries[i].fclk_mhz;
+			s[i].socclk_mhz = clk_table->entries[i].socclk_mhz;
+			s[i].dram_speed_mts = clk_table->entries[i].memclk_mhz *
+				2 * clk_table->entries[i].wck_ratio;
+
+			/* Clocks independent of voltage level. */
+			s[i].dispclk_mhz = max_dispclk_mhz ? max_dispclk_mhz :
+				dcn3_1_soc.clock_limits[closest_clk_lvl].dispclk_mhz;
+
+			s[i].dppclk_mhz = max_dppclk_mhz ? max_dppclk_mhz :
+				dcn3_1_soc.clock_limits[closest_clk_lvl].dppclk_mhz;
+
+			s[i].dram_bw_per_chan_gbps =
+				dcn3_1_soc.clock_limits[closest_clk_lvl].dram_bw_per_chan_gbps;
+			s[i].dscclk_mhz = dcn3_1_soc.clock_limits[closest_clk_lvl].dscclk_mhz;
+			s[i].dtbclk_mhz = dcn3_1_soc.clock_limits[closest_clk_lvl].dtbclk_mhz;
+			s[i].phyclk_d18_mhz =
+				dcn3_1_soc.clock_limits[closest_clk_lvl].phyclk_d18_mhz;
+			s[i].phyclk_mhz = dcn3_1_soc.clock_limits[closest_clk_lvl].phyclk_mhz;
+		}
+		if (clk_table->num_entries) {
+			dcn3_1_soc.num_states = clk_table->num_entries;
+		}
+	}
+
+	memcpy(dcn3_1_soc.clock_limits, s, sizeof(dcn3_1_soc.clock_limits));
+
+	dcn3_1_soc.dispclk_dppclk_vco_speed_mhz = dc->clk_mgr->dentist_vco_freq_khz / 1000.0;
+	dc->dml.soc.dispclk_dppclk_vco_speed_mhz = dc->clk_mgr->dentist_vco_freq_khz / 1000.0;
+
+	if ((int)(dcn3_1_soc.dram_clock_change_latency_us * 1000)
+				!= dc->debug.dram_clock_change_latency_ns
+			&& dc->debug.dram_clock_change_latency_ns) {
+		dcn3_1_soc.dram_clock_change_latency_us = dc->debug.dram_clock_change_latency_ns / 1000;
+	}
+
+	if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment))
+		dml_init_instance(&dc->dml, &dcn3_1_soc, &dcn3_1_ip, DML_PROJECT_DCN31);
+	else
+		dml_init_instance(&dc->dml, &dcn3_1_soc, &dcn3_1_ip, DML_PROJECT_DCN31_FPGA);
+}
+
+void dcn315_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_params)
+{
+	struct clk_limit_table *clk_table = &bw_params->clk_table;
+	int i, max_dispclk_mhz = 0, max_dppclk_mhz = 0;
+
+	dc_assert_fp_enabled();
+
+	dcn3_15_ip.max_num_otg = dc->res_pool->res_cap->num_timing_generator;
+	dcn3_15_ip.max_num_dpp = dc->res_pool->pipe_count;
+
+	if (bw_params->num_channels > 0)
+		dcn3_15_soc.num_chans = bw_params->num_channels;
+	if (bw_params->dram_channel_width_bytes > 0)
+		dcn3_15_soc.dram_channel_width_bytes = bw_params->dram_channel_width_bytes;
+
+	ASSERT(clk_table->num_entries);
+
+	/* Setup soc to always use max dispclk/dppclk to avoid odm-to-lower-voltage */
+	for (i = 0; i < clk_table->num_entries; ++i) {
+		if (clk_table->entries[i].dispclk_mhz > max_dispclk_mhz)
+			max_dispclk_mhz = clk_table->entries[i].dispclk_mhz;
+		if (clk_table->entries[i].dppclk_mhz > max_dppclk_mhz)
+			max_dppclk_mhz = clk_table->entries[i].dppclk_mhz;
+	}
+
+	for (i = 0; i < clk_table->num_entries; i++) {
+		dcn3_15_soc.clock_limits[i].state = i;
+
+		/* Clocks dependent on voltage level. */
+		dcn3_15_soc.clock_limits[i].dcfclk_mhz = clk_table->entries[i].dcfclk_mhz;
+		dcn3_15_soc.clock_limits[i].fabricclk_mhz = clk_table->entries[i].fclk_mhz;
+		dcn3_15_soc.clock_limits[i].socclk_mhz = clk_table->entries[i].socclk_mhz;
+		dcn3_15_soc.clock_limits[i].dram_speed_mts = clk_table->entries[i].memclk_mhz * 2 * clk_table->entries[i].wck_ratio;
+
+		/* These aren't actually read from smu, but rather set in clk_mgr defaults */
+		dcn3_15_soc.clock_limits[i].dtbclk_mhz = clk_table->entries[i].dtbclk_mhz;
+		dcn3_15_soc.clock_limits[i].phyclk_d18_mhz = clk_table->entries[i].phyclk_d18_mhz;
+		dcn3_15_soc.clock_limits[i].phyclk_mhz = clk_table->entries[i].phyclk_mhz;
+
+		/* Clocks independent of voltage level. */
+		dcn3_15_soc.clock_limits[i].dispclk_mhz = max_dispclk_mhz;
+		dcn3_15_soc.clock_limits[i].dppclk_mhz = max_dppclk_mhz;
+		dcn3_15_soc.clock_limits[i].dscclk_mhz = max_dispclk_mhz / 3.0;
+	}
+	dcn3_15_soc.num_states = clk_table->num_entries;
+
+
+	/* Set vco to max_dispclk * 2 to make sure the highest dispclk is always available for dml calcs,
+	 * no impact outside of dml validation
+	 */
+	dcn3_15_soc.dispclk_dppclk_vco_speed_mhz = max_dispclk_mhz * 2;
+
+	if ((int)(dcn3_15_soc.dram_clock_change_latency_us * 1000)
+				!= dc->debug.dram_clock_change_latency_ns
+			&& dc->debug.dram_clock_change_latency_ns) {
+		dcn3_15_soc.dram_clock_change_latency_us = dc->debug.dram_clock_change_latency_ns / 1000;
+	}
+
+	if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment))
+		dml_init_instance(&dc->dml, &dcn3_15_soc, &dcn3_15_ip, DML_PROJECT_DCN315);
+	else
+		dml_init_instance(&dc->dml, &dcn3_15_soc, &dcn3_15_ip, DML_PROJECT_DCN31_FPGA);
+}
+
+void dcn316_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_params)
+{
+	struct _vcs_dpi_voltage_scaling_st *s = dc->scratch.update_bw_bounding_box.clock_limits;
+	struct clk_limit_table *clk_table = &bw_params->clk_table;
+	unsigned int i, closest_clk_lvl;
+	int max_dispclk_mhz = 0, max_dppclk_mhz = 0;
+	int j;
+
+	dc_assert_fp_enabled();
+
+	memcpy(s, dcn3_16_soc.clock_limits, sizeof(dcn3_16_soc.clock_limits));
+
+	// Default clock levels are used for diags, which may lead to overclocking.
+	if (!IS_DIAG_DC(dc->ctx->dce_environment)) {
+
+		dcn3_16_ip.max_num_otg = dc->res_pool->res_cap->num_timing_generator;
+		dcn3_16_ip.max_num_dpp = dc->res_pool->pipe_count;
+		dcn3_16_soc.num_chans = bw_params->num_channels;
+
+		ASSERT(clk_table->num_entries);
+
+		/* Prepass to find max clocks independent of voltage level. */
+		for (i = 0; i < clk_table->num_entries; ++i) {
+			if (clk_table->entries[i].dispclk_mhz > max_dispclk_mhz)
+				max_dispclk_mhz = clk_table->entries[i].dispclk_mhz;
+			if (clk_table->entries[i].dppclk_mhz > max_dppclk_mhz)
+				max_dppclk_mhz = clk_table->entries[i].dppclk_mhz;
+		}
+
+		for (i = 0; i < clk_table->num_entries; i++) {
+			/* loop backwards*/
+			for (closest_clk_lvl = 0, j = dcn3_16_soc.num_states - 1; j >= 0; j--) {
+				if ((unsigned int) dcn3_16_soc.clock_limits[j].dcfclk_mhz <=
+				    clk_table->entries[i].dcfclk_mhz) {
+					closest_clk_lvl = j;
+					break;
+				}
+			}
+			// Ported from DCN315
+			if (clk_table->num_entries == 1) {
+				/*smu gives one DPM level, let's take the highest one*/
+				closest_clk_lvl = dcn3_16_soc.num_states - 1;
+			}
+
+			s[i].state = i;
+
+			/* Clocks dependent on voltage level. */
+			s[i].dcfclk_mhz = clk_table->entries[i].dcfclk_mhz;
+			if (clk_table->num_entries == 1 &&
+			    s[i].dcfclk_mhz <
+			    dcn3_16_soc.clock_limits[closest_clk_lvl].dcfclk_mhz) {
+				/*SMU fix not released yet*/
+				s[i].dcfclk_mhz =
+					dcn3_16_soc.clock_limits[closest_clk_lvl].dcfclk_mhz;
+			}
+			s[i].fabricclk_mhz = clk_table->entries[i].fclk_mhz;
+			s[i].socclk_mhz = clk_table->entries[i].socclk_mhz;
+			s[i].dram_speed_mts = clk_table->entries[i].memclk_mhz *
+				2 * clk_table->entries[i].wck_ratio;
+
+			/* Clocks independent of voltage level. */
+			s[i].dispclk_mhz = max_dispclk_mhz ? max_dispclk_mhz :
+				dcn3_16_soc.clock_limits[closest_clk_lvl].dispclk_mhz;
+
+			s[i].dppclk_mhz = max_dppclk_mhz ? max_dppclk_mhz :
+				dcn3_16_soc.clock_limits[closest_clk_lvl].dppclk_mhz;
+
+			s[i].dram_bw_per_chan_gbps =
+				dcn3_16_soc.clock_limits[closest_clk_lvl].dram_bw_per_chan_gbps;
+			s[i].dscclk_mhz = dcn3_16_soc.clock_limits[closest_clk_lvl].dscclk_mhz;
+			s[i].dtbclk_mhz = dcn3_16_soc.clock_limits[closest_clk_lvl].dtbclk_mhz;
+			s[i].phyclk_d18_mhz =
+				dcn3_16_soc.clock_limits[closest_clk_lvl].phyclk_d18_mhz;
+			s[i].phyclk_mhz = dcn3_16_soc.clock_limits[closest_clk_lvl].phyclk_mhz;
+		}
+		if (clk_table->num_entries) {
+			dcn3_16_soc.num_states = clk_table->num_entries;
+		}
+	}
+
+	memcpy(dcn3_16_soc.clock_limits, s, sizeof(dcn3_16_soc.clock_limits));
+
+	if (max_dispclk_mhz) {
+		dcn3_16_soc.dispclk_dppclk_vco_speed_mhz = max_dispclk_mhz * 2;
+		dc->dml.soc.dispclk_dppclk_vco_speed_mhz = max_dispclk_mhz * 2;
+	}
+	if ((int)(dcn3_16_soc.dram_clock_change_latency_us * 1000)
+				!= dc->debug.dram_clock_change_latency_ns
+			&& dc->debug.dram_clock_change_latency_ns) {
+		dcn3_16_soc.dram_clock_change_latency_us = dc->debug.dram_clock_change_latency_ns / 1000;
+	}
+
+	if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment))
+		dml_init_instance(&dc->dml, &dcn3_16_soc, &dcn3_16_ip, DML_PROJECT_DCN31);
+	else
+		dml_init_instance(&dc->dml, &dcn3_16_soc, &dcn3_16_ip, DML_PROJECT_DCN31_FPGA);
+}
+
+int dcn_get_max_non_odm_pix_rate_100hz(struct _vcs_dpi_soc_bounding_box_st *soc)
+{
+	return soc->clock_limits[0].dispclk_mhz * 10000.0 / (1.0 + soc->dcn_downspread_percent / 100.0);
+}