Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 217 insertions, 0 deletions

diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h b/drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h
new file mode 100644
index 000000000..d5ea75455
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h
@@ -0,0 +1,217 @@
+/*
+ * Copyright 2012-15 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#ifndef __DAL_HUBP_H__
+#define __DAL_HUBP_H__
+
+#include "mem_input.h"
+#include "cursor_reg_cache.h"
+
+#define OPP_ID_INVALID 0xf
+#define MAX_TTU 0xffffff
+
+
+enum cursor_pitch {
+	CURSOR_PITCH_64_PIXELS = 0,
+	CURSOR_PITCH_128_PIXELS,
+	CURSOR_PITCH_256_PIXELS
+};
+
+enum cursor_lines_per_chunk {
+	CURSOR_LINE_PER_CHUNK_1 = 0, /* new for DCN2 */
+	CURSOR_LINE_PER_CHUNK_2 = 1,
+	CURSOR_LINE_PER_CHUNK_4,
+	CURSOR_LINE_PER_CHUNK_8,
+	CURSOR_LINE_PER_CHUNK_16
+};
+
+enum hubp_ind_block_size {
+	hubp_ind_block_unconstrained = 0,
+	hubp_ind_block_64b,
+	hubp_ind_block_128b,
+	hubp_ind_block_64b_no_128bcl,
+};
+
+struct hubp {
+	const struct hubp_funcs *funcs;
+	struct dc_context *ctx;
+	struct dc_plane_address request_address;
+	int inst;
+
+	/* run time states */
+	int opp_id;
+	int mpcc_id;
+	struct dc_cursor_attributes curs_attr;
+	struct dc_cursor_position curs_pos;
+	bool power_gated;
+
+	struct cursor_position_cache_hubp  pos;
+	struct cursor_attribute_cache_hubp att;
+	struct cursor_rect cur_rect;
+};
+
+struct surface_flip_registers {
+	uint32_t DCSURF_SURFACE_CONTROL;
+	uint32_t DCSURF_PRIMARY_META_SURFACE_ADDRESS_HIGH;
+	uint32_t DCSURF_PRIMARY_META_SURFACE_ADDRESS;
+	uint32_t DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH;
+	uint32_t DCSURF_PRIMARY_SURFACE_ADDRESS;
+	uint32_t DCSURF_PRIMARY_META_SURFACE_ADDRESS_HIGH_C;
+	uint32_t DCSURF_PRIMARY_META_SURFACE_ADDRESS_C;
+	uint32_t DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH_C;
+	uint32_t DCSURF_PRIMARY_SURFACE_ADDRESS_C;
+	uint32_t DCSURF_SECONDARY_META_SURFACE_ADDRESS_HIGH;
+	uint32_t DCSURF_SECONDARY_META_SURFACE_ADDRESS;
+	uint32_t DCSURF_SECONDARY_SURFACE_ADDRESS_HIGH;
+	uint32_t DCSURF_SECONDARY_SURFACE_ADDRESS;
+	bool tmz_surface;
+	bool immediate;
+	uint8_t vmid;
+	bool grph_stereo;
+};
+
+struct hubp_funcs {
+	void (*hubp_setup)(
+			struct hubp *hubp,
+			struct _vcs_dpi_display_dlg_regs_st *dlg_regs,
+			struct _vcs_dpi_display_ttu_regs_st *ttu_regs,
+			struct _vcs_dpi_display_rq_regs_st *rq_regs,
+			struct _vcs_dpi_display_pipe_dest_params_st *pipe_dest);
+
+	void (*hubp_setup_interdependent)(
+			struct hubp *hubp,
+			struct _vcs_dpi_display_dlg_regs_st *dlg_regs,
+			struct _vcs_dpi_display_ttu_regs_st *ttu_regs);
+
+	void (*dcc_control)(struct hubp *hubp, bool enable,
+			enum hubp_ind_block_size blk_size);
+
+	void (*mem_program_viewport)(
+			struct hubp *hubp,
+			const struct rect *viewport,
+			const struct rect *viewport_c);
+
+	bool (*hubp_program_surface_flip_and_addr)(
+		struct hubp *hubp,
+		const struct dc_plane_address *address,
+		bool flip_immediate);
+
+	void (*hubp_program_pte_vm)(
+		struct hubp *hubp,
+		enum surface_pixel_format format,
+		union dc_tiling_info *tiling_info,
+		enum dc_rotation_angle rotation);
+
+	void (*hubp_set_vm_system_aperture_settings)(
+			struct hubp *hubp,
+			struct vm_system_aperture_param *apt);
+
+	void (*hubp_set_vm_context0_settings)(
+			struct hubp *hubp,
+			const struct vm_context0_param *vm0);
+
+	void (*hubp_program_surface_config)(
+		struct hubp *hubp,
+		enum surface_pixel_format format,
+		union dc_tiling_info *tiling_info,
+		struct plane_size *plane_size,
+		enum dc_rotation_angle rotation,
+		struct dc_plane_dcc_param *dcc,
+		bool horizontal_mirror,
+		unsigned int compa_level);
+
+	bool (*hubp_is_flip_pending)(struct hubp *hubp);
+
+	void (*set_blank)(struct hubp *hubp, bool blank);
+	void (*set_blank_regs)(struct hubp *hubp, bool blank);
+#ifdef CONFIG_DRM_AMD_DC_DCN
+	void (*phantom_hubp_post_enable)(struct hubp *hubp);
+#endif
+	void (*set_hubp_blank_en)(struct hubp *hubp, bool blank);
+
+	void (*set_cursor_attributes)(
+			struct hubp *hubp,
+			const struct dc_cursor_attributes *attr);
+
+	void (*set_cursor_position)(
+			struct hubp *hubp,
+			const struct dc_cursor_position *pos,
+			const struct dc_cursor_mi_param *param);
+
+	void (*hubp_disconnect)(struct hubp *hubp);
+
+	void (*hubp_clk_cntl)(struct hubp *hubp, bool enable);
+	void (*hubp_vtg_sel)(struct hubp *hubp, uint32_t otg_inst);
+	void (*hubp_read_state)(struct hubp *hubp);
+	void (*hubp_clear_underflow)(struct hubp *hubp);
+	void (*hubp_disable_control)(struct hubp *hubp, bool disable_hubp);
+	unsigned int (*hubp_get_underflow_status)(struct hubp *hubp);
+	void (*hubp_init)(struct hubp *hubp);
+
+	void (*dmdata_set_attributes)(
+			struct hubp *hubp,
+			const struct dc_dmdata_attributes *attr);
+
+	void (*dmdata_load)(
+			struct hubp *hubp,
+			uint32_t dmdata_sw_size,
+			const uint32_t *dmdata_sw_data);
+	bool (*dmdata_status_done)(struct hubp *hubp);
+	void (*hubp_enable_tripleBuffer)(
+		struct hubp *hubp,
+		bool enable);
+
+	bool (*hubp_is_triplebuffer_enabled)(
+		struct hubp *hubp);
+
+	void (*hubp_set_flip_control_surface_gsl)(
+		struct hubp *hubp,
+		bool enable);
+
+	void (*validate_dml_output)(
+			struct hubp *hubp,
+			struct dc_context *ctx,
+			struct _vcs_dpi_display_rq_regs_st *dml_rq_regs,
+			struct _vcs_dpi_display_dlg_regs_st *dml_dlg_attr,
+			struct _vcs_dpi_display_ttu_regs_st *dml_ttu_attr);
+	void (*set_unbounded_requesting)(
+		struct hubp *hubp,
+		bool enable);
+	bool (*hubp_in_blank)(struct hubp *hubp);
+	void (*hubp_soft_reset)(struct hubp *hubp, bool reset);
+
+	void (*hubp_update_force_pstate_disallow)(struct hubp *hubp, bool allow);
+	void (*hubp_update_mall_sel)(struct hubp *hubp, uint32_t mall_sel, bool c_cursor);
+	void (*hubp_prepare_subvp_buffering)(struct hubp *hubp, bool enable);
+
+	void (*hubp_set_flip_int)(struct hubp *hubp);
+
+	void (*program_extended_blank)(struct hubp *hubp,
+			unsigned int min_dst_y_next_start_optimized);
+
+	void (*hubp_wait_pipe_read_start)(struct hubp *hubp);
+};
+
+#endif