Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 753 insertions, 0 deletions

diff --git a/drivers/gpu/drm/amd/include/pptable.h b/drivers/gpu/drm/amd/include/pptable.h
new file mode 100644
index 000000000..0b6a057e0
--- /dev/null
+++ b/drivers/gpu/drm/amd/include/pptable.h
@@ -0,0 +1,753 @@
+/*
+ * Copyright 2013 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _PPTABLE_H
+#define _PPTABLE_H
+
+#pragma pack(1)
+
+typedef struct _ATOM_PPLIB_THERMALCONTROLLER
+
+{
+    UCHAR ucType;           // one of ATOM_PP_THERMALCONTROLLER_*
+    UCHAR ucI2cLine;        // as interpreted by DAL I2C
+    UCHAR ucI2cAddress;
+    UCHAR ucFanParameters;  // Fan Control Parameters.
+    UCHAR ucFanMinRPM;      // Fan Minimum RPM (hundreds) -- for display purposes only.
+    UCHAR ucFanMaxRPM;      // Fan Maximum RPM (hundreds) -- for display purposes only.
+    UCHAR ucReserved;       // ----
+    UCHAR ucFlags;          // to be defined
+} ATOM_PPLIB_THERMALCONTROLLER;
+
+#define ATOM_PP_FANPARAMETERS_TACHOMETER_PULSES_PER_REVOLUTION_MASK 0x0f
+#define ATOM_PP_FANPARAMETERS_NOFAN                                 0x80    // No fan is connected to this controller.
+
+#define ATOM_PP_THERMALCONTROLLER_NONE      0
+#define ATOM_PP_THERMALCONTROLLER_LM63      1  // Not used by PPLib
+#define ATOM_PP_THERMALCONTROLLER_ADM1032   2  // Not used by PPLib
+#define ATOM_PP_THERMALCONTROLLER_ADM1030   3  // Not used by PPLib
+#define ATOM_PP_THERMALCONTROLLER_MUA6649   4  // Not used by PPLib
+#define ATOM_PP_THERMALCONTROLLER_LM64      5
+#define ATOM_PP_THERMALCONTROLLER_F75375    6  // Not used by PPLib
+#define ATOM_PP_THERMALCONTROLLER_RV6xx     7
+#define ATOM_PP_THERMALCONTROLLER_RV770     8
+#define ATOM_PP_THERMALCONTROLLER_ADT7473   9
+#define ATOM_PP_THERMALCONTROLLER_KONG      10
+#define ATOM_PP_THERMALCONTROLLER_EXTERNAL_GPIO     11
+#define ATOM_PP_THERMALCONTROLLER_EVERGREEN 12
+#define ATOM_PP_THERMALCONTROLLER_EMC2103   13  /* 0x0D */ // Only fan control will be implemented, do NOT show this in PPGen.
+#define ATOM_PP_THERMALCONTROLLER_SUMO      14  /* 0x0E */ // Sumo type, used internally
+#define ATOM_PP_THERMALCONTROLLER_NISLANDS  15
+#define ATOM_PP_THERMALCONTROLLER_SISLANDS  16
+#define ATOM_PP_THERMALCONTROLLER_LM96163   17
+#define ATOM_PP_THERMALCONTROLLER_CISLANDS  18
+#define ATOM_PP_THERMALCONTROLLER_KAVERI    19
+#define ATOM_PP_THERMALCONTROLLER_ICELAND   20
+#define ATOM_PP_THERMALCONTROLLER_TONGA     21
+#define ATOM_PP_THERMALCONTROLLER_FIJI      22
+#define ATOM_PP_THERMALCONTROLLER_POLARIS10 23
+#define ATOM_PP_THERMALCONTROLLER_VEGA10    24
+
+
+// Thermal controller 'combo type' to use an external controller for Fan control and an internal controller for thermal.
+// We probably should reserve the bit 0x80 for this use.
+// To keep the number of these types low we should also use the same code for all ASICs (i.e. do not distinguish RV6xx and RV7xx Internal here).
+// The driver can pick the correct internal controller based on the ASIC.
+#define ATOM_PP_THERMALCONTROLLER_ADT7473_WITH_INTERNAL   0x89    // ADT7473 Fan Control + Internal Thermal Controller
+#define ATOM_PP_THERMALCONTROLLER_EMC2103_WITH_INTERNAL   0x8D    // EMC2103 Fan Control + Internal Thermal Controller
+
+typedef struct _ATOM_PPLIB_STATE
+{
+    UCHAR ucNonClockStateIndex;
+    UCHAR ucClockStateIndices[1]; // variable-sized
+} ATOM_PPLIB_STATE;
+
+
+typedef struct _ATOM_PPLIB_FANTABLE
+{
+    UCHAR   ucFanTableFormat;                // Change this if the table format changes or version changes so that the other fields are not the same.
+    UCHAR   ucTHyst;                         // Temperature hysteresis. Integer.
+    USHORT  usTMin;                          // The temperature, in 0.01 centigrades, below which we just run at a minimal PWM.
+    USHORT  usTMed;                          // The middle temperature where we change slopes.
+    USHORT  usTHigh;                         // The high point above TMed for adjusting the second slope.
+    USHORT  usPWMMin;                        // The minimum PWM value in percent (0.01% increments).
+    USHORT  usPWMMed;                        // The PWM value (in percent) at TMed.
+    USHORT  usPWMHigh;                       // The PWM value at THigh.
+} ATOM_PPLIB_FANTABLE;
+
+typedef struct _ATOM_PPLIB_FANTABLE2
+{
+    ATOM_PPLIB_FANTABLE basicTable;
+    USHORT  usTMax;                          // The max temperature
+} ATOM_PPLIB_FANTABLE2;
+
+typedef struct _ATOM_PPLIB_FANTABLE3
+{
+	ATOM_PPLIB_FANTABLE2 basicTable2;
+	UCHAR ucFanControlMode;
+	USHORT usFanPWMMax;
+	USHORT usFanOutputSensitivity;
+} ATOM_PPLIB_FANTABLE3;
+
+typedef struct _ATOM_PPLIB_FANTABLE4
+{
+    ATOM_PPLIB_FANTABLE3 basicTable3;
+    USHORT  usFanRPMMax;
+} ATOM_PPLIB_FANTABLE4;
+
+typedef struct _ATOM_PPLIB_FANTABLE5
+{
+    ATOM_PPLIB_FANTABLE4 basicTable4;
+    USHORT  usFanCurrentLow;
+    USHORT  usFanCurrentHigh;
+    USHORT  usFanRPMLow;
+    USHORT  usFanRPMHigh;
+} ATOM_PPLIB_FANTABLE5;
+
+typedef struct _ATOM_PPLIB_EXTENDEDHEADER
+{
+    USHORT  usSize;
+    ULONG   ulMaxEngineClock;   // For Overdrive.
+    ULONG   ulMaxMemoryClock;   // For Overdrive.
+    // Add extra system parameters here, always adjust size to include all fields.
+    USHORT  usVCETableOffset; //points to ATOM_PPLIB_VCE_Table
+    USHORT  usUVDTableOffset;   //points to ATOM_PPLIB_UVD_Table
+    USHORT  usSAMUTableOffset;  //points to ATOM_PPLIB_SAMU_Table
+    USHORT  usPPMTableOffset;   //points to ATOM_PPLIB_PPM_Table
+    USHORT  usACPTableOffset;  //points to ATOM_PPLIB_ACP_Table   
+    /* points to ATOM_PPLIB_POWERTUNE_Table */
+    USHORT  usPowerTuneTableOffset;
+    /* points to ATOM_PPLIB_CLOCK_Voltage_Dependency_Table for sclkVddgfxTable */
+    USHORT  usSclkVddgfxTableOffset;
+    USHORT  usVQBudgetingTableOffset; /* points to the vqBudgetingTable; */
+} ATOM_PPLIB_EXTENDEDHEADER;
+
+//// ATOM_PPLIB_POWERPLAYTABLE::ulPlatformCaps
+#define ATOM_PP_PLATFORM_CAP_BACKBIAS 1
+#define ATOM_PP_PLATFORM_CAP_POWERPLAY 2
+#define ATOM_PP_PLATFORM_CAP_SBIOSPOWERSOURCE 4
+#define ATOM_PP_PLATFORM_CAP_ASPM_L0s 8
+#define ATOM_PP_PLATFORM_CAP_ASPM_L1 16
+#define ATOM_PP_PLATFORM_CAP_HARDWAREDC 32
+#define ATOM_PP_PLATFORM_CAP_GEMINIPRIMARY 64
+#define ATOM_PP_PLATFORM_CAP_STEPVDDC 128
+#define ATOM_PP_PLATFORM_CAP_VOLTAGECONTROL 256
+#define ATOM_PP_PLATFORM_CAP_SIDEPORTCONTROL 512
+#define ATOM_PP_PLATFORM_CAP_TURNOFFPLL_ASPML1 1024
+#define ATOM_PP_PLATFORM_CAP_HTLINKCONTROL 2048
+#define ATOM_PP_PLATFORM_CAP_MVDDCONTROL 4096
+#define ATOM_PP_PLATFORM_CAP_GOTO_BOOT_ON_ALERT 0x2000              // Go to boot state on alerts, e.g. on an AC->DC transition.
+#define ATOM_PP_PLATFORM_CAP_DONT_WAIT_FOR_VBLANK_ON_ALERT 0x4000   // Do NOT wait for VBLANK during an alert (e.g. AC->DC transition).
+#define ATOM_PP_PLATFORM_CAP_VDDCI_CONTROL 0x8000                   // Does the driver control VDDCI independently from VDDC.
+#define ATOM_PP_PLATFORM_CAP_REGULATOR_HOT 0x00010000               // Enable the 'regulator hot' feature.
+#define ATOM_PP_PLATFORM_CAP_BACO          0x00020000               // Does the driver supports BACO state.
+#define ATOM_PP_PLATFORM_CAP_NEW_CAC_VOLTAGE   0x00040000           // Does the driver supports new CAC voltage table.
+#define ATOM_PP_PLATFORM_CAP_REVERT_GPIO5_POLARITY   0x00080000     // Does the driver supports revert GPIO5 polarity.
+#define ATOM_PP_PLATFORM_CAP_OUTPUT_THERMAL2GPIO17   0x00100000     // Does the driver supports thermal2GPIO17.
+#define ATOM_PP_PLATFORM_CAP_VRHOT_GPIO_CONFIGURABLE   0x00200000   // Does the driver supports VR HOT GPIO Configurable.
+#define ATOM_PP_PLATFORM_CAP_TEMP_INVERSION   0x00400000            // Does the driver supports Temp Inversion feature.
+#define ATOM_PP_PLATFORM_CAP_EVV    0x00800000
+#define ATOM_PP_PLATFORM_COMBINE_PCC_WITH_THERMAL_SIGNAL    0x01000000
+#define ATOM_PP_PLATFORM_LOAD_POST_PRODUCTION_FIRMWARE    0x02000000
+#define ATOM_PP_PLATFORM_CAP_DISABLE_USING_ACTUAL_TEMPERATURE_FOR_POWER_CALC   0x04000000
+#define ATOM_PP_PLATFORM_CAP_VRHOT_POLARITY_HIGH   0x08000000
+
+typedef struct _ATOM_PPLIB_POWERPLAYTABLE
+{
+      ATOM_COMMON_TABLE_HEADER sHeader;
+
+      UCHAR ucDataRevision;
+
+      UCHAR ucNumStates;
+      UCHAR ucStateEntrySize;
+      UCHAR ucClockInfoSize;
+      UCHAR ucNonClockSize;
+
+      // offset from start of this table to array of ucNumStates ATOM_PPLIB_STATE structures
+      USHORT usStateArrayOffset;
+
+      // offset from start of this table to array of ASIC-specific structures,
+      // currently ATOM_PPLIB_CLOCK_INFO.
+      USHORT usClockInfoArrayOffset;
+
+      // offset from start of this table to array of ATOM_PPLIB_NONCLOCK_INFO
+      USHORT usNonClockInfoArrayOffset;
+
+      USHORT usBackbiasTime;    // in microseconds
+      USHORT usVoltageTime;     // in microseconds
+      USHORT usTableSize;       //the size of this structure, or the extended structure
+
+      ULONG ulPlatformCaps;            // See ATOM_PPLIB_CAPS_*
+
+      ATOM_PPLIB_THERMALCONTROLLER    sThermalController;
+
+      USHORT usBootClockInfoOffset;
+      USHORT usBootNonClockInfoOffset;
+
+} ATOM_PPLIB_POWERPLAYTABLE;
+
+typedef struct _ATOM_PPLIB_POWERPLAYTABLE2
+{
+    ATOM_PPLIB_POWERPLAYTABLE basicTable;
+    UCHAR   ucNumCustomThermalPolicy;
+    USHORT  usCustomThermalPolicyArrayOffset;
+}ATOM_PPLIB_POWERPLAYTABLE2, *LPATOM_PPLIB_POWERPLAYTABLE2;
+
+typedef struct _ATOM_PPLIB_POWERPLAYTABLE3
+{
+    ATOM_PPLIB_POWERPLAYTABLE2 basicTable2;
+    USHORT                     usFormatID;                      // To be used ONLY by PPGen.
+    USHORT                     usFanTableOffset;
+    USHORT                     usExtendendedHeaderOffset;
+} ATOM_PPLIB_POWERPLAYTABLE3, *LPATOM_PPLIB_POWERPLAYTABLE3;
+
+typedef struct _ATOM_PPLIB_POWERPLAYTABLE4
+{
+    ATOM_PPLIB_POWERPLAYTABLE3 basicTable3;
+    ULONG                      ulGoldenPPID;                    // PPGen use only     
+    ULONG                      ulGoldenRevision;                // PPGen use only
+    USHORT                     usVddcDependencyOnSCLKOffset;
+    USHORT                     usVddciDependencyOnMCLKOffset;
+    USHORT                     usVddcDependencyOnMCLKOffset;
+    USHORT                     usMaxClockVoltageOnDCOffset;
+    USHORT                     usVddcPhaseShedLimitsTableOffset;    // Points to ATOM_PPLIB_PhaseSheddingLimits_Table
+    USHORT                     usMvddDependencyOnMCLKOffset;  
+} ATOM_PPLIB_POWERPLAYTABLE4, *LPATOM_PPLIB_POWERPLAYTABLE4;
+
+typedef struct _ATOM_PPLIB_POWERPLAYTABLE5
+{
+    ATOM_PPLIB_POWERPLAYTABLE4 basicTable4;
+    ULONG                      ulTDPLimit;
+    ULONG                      ulNearTDPLimit;
+    ULONG                      ulSQRampingThreshold;
+    USHORT                     usCACLeakageTableOffset;         // Points to ATOM_PPLIB_CAC_Leakage_Table
+    ULONG                      ulCACLeakage;                    // The iLeakage for driver calculated CAC leakage table
+    USHORT                     usTDPODLimit;
+    USHORT                     usLoadLineSlope;                 // in milliOhms * 100
+} ATOM_PPLIB_POWERPLAYTABLE5, *LPATOM_PPLIB_POWERPLAYTABLE5;
+
+//// ATOM_PPLIB_NONCLOCK_INFO::usClassification
+#define ATOM_PPLIB_CLASSIFICATION_UI_MASK          0x0007
+#define ATOM_PPLIB_CLASSIFICATION_UI_SHIFT         0
+#define ATOM_PPLIB_CLASSIFICATION_UI_NONE          0
+#define ATOM_PPLIB_CLASSIFICATION_UI_BATTERY       1
+#define ATOM_PPLIB_CLASSIFICATION_UI_BALANCED      3
+#define ATOM_PPLIB_CLASSIFICATION_UI_PERFORMANCE   5
+// 2, 4, 6, 7 are reserved
+
+#define ATOM_PPLIB_CLASSIFICATION_BOOT                   0x0008
+#define ATOM_PPLIB_CLASSIFICATION_THERMAL                0x0010
+#define ATOM_PPLIB_CLASSIFICATION_LIMITEDPOWERSOURCE     0x0020
+#define ATOM_PPLIB_CLASSIFICATION_REST                   0x0040
+#define ATOM_PPLIB_CLASSIFICATION_FORCED                 0x0080
+#define ATOM_PPLIB_CLASSIFICATION_3DPERFORMANCE          0x0100
+#define ATOM_PPLIB_CLASSIFICATION_OVERDRIVETEMPLATE      0x0200
+#define ATOM_PPLIB_CLASSIFICATION_UVDSTATE               0x0400
+#define ATOM_PPLIB_CLASSIFICATION_3DLOW                  0x0800
+#define ATOM_PPLIB_CLASSIFICATION_ACPI                   0x1000
+#define ATOM_PPLIB_CLASSIFICATION_HD2STATE               0x2000
+#define ATOM_PPLIB_CLASSIFICATION_HDSTATE                0x4000
+#define ATOM_PPLIB_CLASSIFICATION_SDSTATE                0x8000
+
+//// ATOM_PPLIB_NONCLOCK_INFO::usClassification2
+#define ATOM_PPLIB_CLASSIFICATION2_LIMITEDPOWERSOURCE_2     0x0001
+#define ATOM_PPLIB_CLASSIFICATION2_ULV                      0x0002
+#define ATOM_PPLIB_CLASSIFICATION2_MVC                      0x0004   //Multi-View Codec (BD-3D)
+
+//// ATOM_PPLIB_NONCLOCK_INFO::ulCapsAndSettings
+#define ATOM_PPLIB_SINGLE_DISPLAY_ONLY           0x00000001
+#define ATOM_PPLIB_SUPPORTS_VIDEO_PLAYBACK         0x00000002
+
+// 0 is 2.5Gb/s, 1 is 5Gb/s
+#define ATOM_PPLIB_PCIE_LINK_SPEED_MASK            0x00000004
+#define ATOM_PPLIB_PCIE_LINK_SPEED_SHIFT           2
+
+// lanes - 1: 1, 2, 4, 8, 12, 16 permitted by PCIE spec
+#define ATOM_PPLIB_PCIE_LINK_WIDTH_MASK            0x000000F8
+#define ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT           3
+
+// lookup into reduced refresh-rate table
+#define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_MASK  0x00000F00
+#define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_SHIFT 8
+
+#define ATOM_PPLIB_LIMITED_REFRESHRATE_UNLIMITED    0
+#define ATOM_PPLIB_LIMITED_REFRESHRATE_50HZ         1
+// 2-15 TBD as needed.
+
+#define ATOM_PPLIB_SOFTWARE_DISABLE_LOADBALANCING        0x00001000
+#define ATOM_PPLIB_SOFTWARE_ENABLE_SLEEP_FOR_TIMESTAMPS  0x00002000
+
+#define ATOM_PPLIB_DISALLOW_ON_DC                       0x00004000
+
+#define ATOM_PPLIB_ENABLE_VARIBRIGHT                     0x00008000
+
+//memory related flags
+#define ATOM_PPLIB_SWSTATE_MEMORY_DLL_OFF               0x000010000
+
+//M3 Arb    //2bits, current 3 sets of parameters in total
+#define ATOM_PPLIB_M3ARB_MASK                       0x00060000
+#define ATOM_PPLIB_M3ARB_SHIFT                      17
+
+#define ATOM_PPLIB_ENABLE_DRR                       0x00080000
+
+// remaining 16 bits are reserved
+typedef struct _ATOM_PPLIB_THERMAL_STATE
+{
+    UCHAR   ucMinTemperature;
+    UCHAR   ucMaxTemperature;
+    UCHAR   ucThermalAction;
+}ATOM_PPLIB_THERMAL_STATE, *LPATOM_PPLIB_THERMAL_STATE;
+
+// Contained in an array starting at the offset
+// in ATOM_PPLIB_POWERPLAYTABLE::usNonClockInfoArrayOffset.
+// referenced from ATOM_PPLIB_STATE_INFO::ucNonClockStateIndex
+#define ATOM_PPLIB_NONCLOCKINFO_VER1      12
+#define ATOM_PPLIB_NONCLOCKINFO_VER2      24
+typedef struct _ATOM_PPLIB_NONCLOCK_INFO
+{
+      USHORT usClassification;
+      UCHAR  ucMinTemperature;
+      UCHAR  ucMaxTemperature;
+      ULONG  ulCapsAndSettings;
+      UCHAR  ucRequiredPower;
+      USHORT usClassification2;
+      ULONG  ulVCLK;
+      ULONG  ulDCLK;
+      UCHAR  ucUnused[5];
+} ATOM_PPLIB_NONCLOCK_INFO;
+
+// Contained in an array starting at the offset
+// in ATOM_PPLIB_POWERPLAYTABLE::usClockInfoArrayOffset.
+// referenced from ATOM_PPLIB_STATE::ucClockStateIndices
+typedef struct _ATOM_PPLIB_R600_CLOCK_INFO
+{
+      USHORT usEngineClockLow;
+      UCHAR ucEngineClockHigh;
+
+      USHORT usMemoryClockLow;
+      UCHAR ucMemoryClockHigh;
+
+      USHORT usVDDC;
+      USHORT usUnused1;
+      USHORT usUnused2;
+
+      ULONG ulFlags; // ATOM_PPLIB_R600_FLAGS_*
+
+} ATOM_PPLIB_R600_CLOCK_INFO;
+
+// ulFlags in ATOM_PPLIB_R600_CLOCK_INFO
+#define ATOM_PPLIB_R600_FLAGS_PCIEGEN2          1
+#define ATOM_PPLIB_R600_FLAGS_UVDSAFE           2
+#define ATOM_PPLIB_R600_FLAGS_BACKBIASENABLE    4
+#define ATOM_PPLIB_R600_FLAGS_MEMORY_ODT_OFF    8
+#define ATOM_PPLIB_R600_FLAGS_MEMORY_DLL_OFF   16
+#define ATOM_PPLIB_R600_FLAGS_LOWPOWER         32   // On the RV770 use 'low power' setting (sequencer S0).
+
+typedef struct _ATOM_PPLIB_RS780_CLOCK_INFO
+
+{
+      USHORT usLowEngineClockLow;         // Low Engine clock in MHz (the same way as on the R600).
+      UCHAR  ucLowEngineClockHigh;
+      USHORT usHighEngineClockLow;        // High Engine clock in MHz.
+      UCHAR  ucHighEngineClockHigh;
+      USHORT usMemoryClockLow;            // For now one of the ATOM_PPLIB_RS780_SPMCLK_XXXX constants.
+      UCHAR  ucMemoryClockHigh;           // Currentyl unused.
+      UCHAR  ucPadding;                   // For proper alignment and size.
+      USHORT usVDDC;                      // For the 780, use: None, Low, High, Variable
+      UCHAR  ucMaxHTLinkWidth;            // From SBIOS - {2, 4, 8, 16}
+      UCHAR  ucMinHTLinkWidth;            // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could 
+      USHORT usHTLinkFreq;                // See definition ATOM_PPLIB_RS780_HTLINKFREQ_xxx or in MHz(>=200).
+      ULONG  ulFlags; 
+} ATOM_PPLIB_RS780_CLOCK_INFO;
+
+#define ATOM_PPLIB_RS780_VOLTAGE_NONE       0 
+#define ATOM_PPLIB_RS780_VOLTAGE_LOW        1 
+#define ATOM_PPLIB_RS780_VOLTAGE_HIGH       2 
+#define ATOM_PPLIB_RS780_VOLTAGE_VARIABLE   3 
+
+#define ATOM_PPLIB_RS780_SPMCLK_NONE        0   // We cannot change the side port memory clock, leave it as it is.
+#define ATOM_PPLIB_RS780_SPMCLK_LOW         1
+#define ATOM_PPLIB_RS780_SPMCLK_HIGH        2
+
+#define ATOM_PPLIB_RS780_HTLINKFREQ_NONE       0 
+#define ATOM_PPLIB_RS780_HTLINKFREQ_LOW        1 
+#define ATOM_PPLIB_RS780_HTLINKFREQ_HIGH       2 
+
+typedef struct _ATOM_PPLIB_EVERGREEN_CLOCK_INFO
+{
+      USHORT usEngineClockLow;
+      UCHAR  ucEngineClockHigh;
+
+      USHORT usMemoryClockLow;
+      UCHAR  ucMemoryClockHigh;
+
+      USHORT usVDDC;
+      USHORT usVDDCI;
+      USHORT usUnused;
+
+      ULONG ulFlags; // ATOM_PPLIB_R600_FLAGS_*
+
+} ATOM_PPLIB_EVERGREEN_CLOCK_INFO;
+
+typedef struct _ATOM_PPLIB_SI_CLOCK_INFO
+{
+      USHORT usEngineClockLow;
+      UCHAR  ucEngineClockHigh;
+
+      USHORT usMemoryClockLow;
+      UCHAR  ucMemoryClockHigh;
+
+      USHORT usVDDC;
+      USHORT usVDDCI;
+      UCHAR  ucPCIEGen;
+      UCHAR  ucUnused1;
+
+      ULONG ulFlags; // ATOM_PPLIB_SI_FLAGS_*, no flag is necessary for now
+
+} ATOM_PPLIB_SI_CLOCK_INFO;
+
+typedef struct _ATOM_PPLIB_CI_CLOCK_INFO
+{
+      USHORT usEngineClockLow;
+      UCHAR  ucEngineClockHigh;
+
+      USHORT usMemoryClockLow;
+      UCHAR  ucMemoryClockHigh;
+      
+      UCHAR  ucPCIEGen;
+      USHORT usPCIELane;
+} ATOM_PPLIB_CI_CLOCK_INFO;
+
+typedef struct _ATOM_PPLIB_SUMO_CLOCK_INFO{
+      USHORT usEngineClockLow;  //clockfrequency & 0xFFFF. The unit is in 10khz
+      UCHAR  ucEngineClockHigh; //clockfrequency >> 16. 
+      UCHAR  vddcIndex;         //2-bit vddc index;
+      USHORT tdpLimit;
+      //please initalize to 0
+      USHORT rsv1;
+      //please initialize to 0s
+      ULONG rsv2[2];
+}ATOM_PPLIB_SUMO_CLOCK_INFO;
+
+typedef struct _ATOM_PPLIB_KV_CLOCK_INFO {
+      USHORT usEngineClockLow;
+      UCHAR  ucEngineClockHigh;
+      UCHAR  vddcIndex;
+      USHORT tdpLimit;
+      USHORT rsv1;
+      ULONG rsv2[2];
+} ATOM_PPLIB_KV_CLOCK_INFO;
+
+typedef struct _ATOM_PPLIB_CZ_CLOCK_INFO {
+      UCHAR index;
+      UCHAR rsv[3];
+} ATOM_PPLIB_CZ_CLOCK_INFO;
+
+typedef struct _ATOM_PPLIB_STATE_V2
+{
+      //number of valid dpm levels in this state; Driver uses it to calculate the whole 
+      //size of the state: sizeof(ATOM_PPLIB_STATE_V2) + (ucNumDPMLevels - 1) * sizeof(UCHAR)
+      UCHAR ucNumDPMLevels;
+      
+      //a index to the array of nonClockInfos
+      UCHAR nonClockInfoIndex;
+      /**
+      * Driver will read the first ucNumDPMLevels in this array
+      */
+      UCHAR clockInfoIndex[1];
+} ATOM_PPLIB_STATE_V2;
+
+typedef struct _StateArray{
+    //how many states we have 
+    UCHAR ucNumEntries;
+    
+    ATOM_PPLIB_STATE_V2 states[1];
+}StateArray;
+
+
+typedef struct _ClockInfoArray{
+    //how many clock levels we have
+    UCHAR ucNumEntries;
+    
+    //sizeof(ATOM_PPLIB_CLOCK_INFO)
+    UCHAR ucEntrySize;
+    
+    UCHAR clockInfo[1];
+}ClockInfoArray;
+
+typedef struct _NonClockInfoArray{
+
+    //how many non-clock levels we have. normally should be same as number of states
+    UCHAR ucNumEntries;
+    //sizeof(ATOM_PPLIB_NONCLOCK_INFO)
+    UCHAR ucEntrySize;
+    
+    ATOM_PPLIB_NONCLOCK_INFO nonClockInfo[1];
+}NonClockInfoArray;
+
+typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Record
+{
+    USHORT usClockLow;
+    UCHAR  ucClockHigh;
+    USHORT usVoltage;
+}ATOM_PPLIB_Clock_Voltage_Dependency_Record;
+
+typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Table
+{
+    UCHAR ucNumEntries;                                                // Number of entries.
+    ATOM_PPLIB_Clock_Voltage_Dependency_Record entries[1];             // Dynamically allocate entries.
+}ATOM_PPLIB_Clock_Voltage_Dependency_Table;
+
+typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Record
+{
+    USHORT usSclkLow;
+    UCHAR  ucSclkHigh;
+    USHORT usMclkLow;
+    UCHAR  ucMclkHigh;
+    USHORT usVddc;
+    USHORT usVddci;
+}ATOM_PPLIB_Clock_Voltage_Limit_Record;
+
+typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Table
+{
+    UCHAR ucNumEntries;                                                // Number of entries.
+    ATOM_PPLIB_Clock_Voltage_Limit_Record entries[1];                  // Dynamically allocate entries.
+}ATOM_PPLIB_Clock_Voltage_Limit_Table;
+
+union _ATOM_PPLIB_CAC_Leakage_Record
+{
+    struct
+    {
+        USHORT usVddc;          // We use this field for the "fake" standardized VDDC for power calculations; For CI and newer, we use this as the real VDDC value. in CI we read it as StdVoltageHiSidd
+        ULONG  ulLeakageValue;  // For CI and newer we use this as the "fake" standar VDDC value. in CI we read it as StdVoltageLoSidd
+
+    };
+    struct
+     {
+        USHORT usVddc1;
+        USHORT usVddc2;
+        USHORT usVddc3;
+     };
+};
+
+typedef union _ATOM_PPLIB_CAC_Leakage_Record ATOM_PPLIB_CAC_Leakage_Record;
+
+typedef struct _ATOM_PPLIB_CAC_Leakage_Table
+{
+    UCHAR ucNumEntries;                                                 // Number of entries.
+    ATOM_PPLIB_CAC_Leakage_Record entries[1];                           // Dynamically allocate entries.
+}ATOM_PPLIB_CAC_Leakage_Table;
+
+typedef struct _ATOM_PPLIB_PhaseSheddingLimits_Record
+{
+    USHORT usVoltage;
+    USHORT usSclkLow;
+    UCHAR  ucSclkHigh;
+    USHORT usMclkLow;
+    UCHAR  ucMclkHigh;
+}ATOM_PPLIB_PhaseSheddingLimits_Record;
+
+typedef struct _ATOM_PPLIB_PhaseSheddingLimits_Table
+{
+    UCHAR ucNumEntries;                                                 // Number of entries.
+    ATOM_PPLIB_PhaseSheddingLimits_Record entries[1];                   // Dynamically allocate entries.
+}ATOM_PPLIB_PhaseSheddingLimits_Table;
+
+typedef struct _VCEClockInfo{
+    USHORT usEVClkLow;
+    UCHAR  ucEVClkHigh;
+    USHORT usECClkLow;
+    UCHAR  ucECClkHigh;
+}VCEClockInfo;
+
+typedef struct _VCEClockInfoArray{
+    UCHAR ucNumEntries;
+    VCEClockInfo entries[1];
+}VCEClockInfoArray;
+
+typedef struct _ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record
+{
+    USHORT usVoltage;
+    UCHAR  ucVCEClockInfoIndex;
+}ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record;
+
+typedef struct _ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table
+{
+    UCHAR numEntries;
+    ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record entries[1];
+}ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table;
+
+typedef struct _ATOM_PPLIB_VCE_State_Record
+{
+    UCHAR  ucVCEClockInfoIndex;
+    UCHAR  ucClockInfoIndex; //highest 2 bits indicates memory p-states, lower 6bits indicates index to ClockInfoArrary
+}ATOM_PPLIB_VCE_State_Record;
+
+typedef struct _ATOM_PPLIB_VCE_State_Table
+{
+    UCHAR numEntries;
+    ATOM_PPLIB_VCE_State_Record entries[1];
+}ATOM_PPLIB_VCE_State_Table;
+
+
+typedef struct _ATOM_PPLIB_VCE_Table
+{
+      UCHAR revid;
+//    VCEClockInfoArray array;
+//    ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table limits;
+//    ATOM_PPLIB_VCE_State_Table states;
+}ATOM_PPLIB_VCE_Table;
+
+
+typedef struct _UVDClockInfo{
+    USHORT usVClkLow;
+    UCHAR  ucVClkHigh;
+    USHORT usDClkLow;
+    UCHAR  ucDClkHigh;
+}UVDClockInfo;
+
+typedef struct _UVDClockInfoArray{
+    UCHAR ucNumEntries;
+    UVDClockInfo entries[1];
+}UVDClockInfoArray;
+
+typedef struct _ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record
+{
+    USHORT usVoltage;
+    UCHAR  ucUVDClockInfoIndex;
+}ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record;
+
+typedef struct _ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table
+{
+    UCHAR numEntries;
+    ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record entries[1];
+}ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table;
+
+typedef struct _ATOM_PPLIB_UVD_Table
+{
+      UCHAR revid;
+//    UVDClockInfoArray array;
+//    ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table limits;
+}ATOM_PPLIB_UVD_Table;
+
+typedef struct _ATOM_PPLIB_SAMClk_Voltage_Limit_Record
+{
+      USHORT usVoltage;
+      USHORT usSAMClockLow;
+      UCHAR  ucSAMClockHigh;
+}ATOM_PPLIB_SAMClk_Voltage_Limit_Record;
+
+typedef struct _ATOM_PPLIB_SAMClk_Voltage_Limit_Table{
+    UCHAR numEntries;
+    ATOM_PPLIB_SAMClk_Voltage_Limit_Record entries[1];
+}ATOM_PPLIB_SAMClk_Voltage_Limit_Table;
+
+typedef struct _ATOM_PPLIB_SAMU_Table
+{
+      UCHAR revid;
+      ATOM_PPLIB_SAMClk_Voltage_Limit_Table limits;
+}ATOM_PPLIB_SAMU_Table;
+
+typedef struct _ATOM_PPLIB_ACPClk_Voltage_Limit_Record
+{
+      USHORT usVoltage;
+      USHORT usACPClockLow;
+      UCHAR  ucACPClockHigh;
+}ATOM_PPLIB_ACPClk_Voltage_Limit_Record;
+
+typedef struct _ATOM_PPLIB_ACPClk_Voltage_Limit_Table{
+    UCHAR numEntries;
+    ATOM_PPLIB_ACPClk_Voltage_Limit_Record entries[1];
+}ATOM_PPLIB_ACPClk_Voltage_Limit_Table;
+
+typedef struct _ATOM_PPLIB_ACP_Table
+{
+      UCHAR revid;
+      ATOM_PPLIB_ACPClk_Voltage_Limit_Table limits;
+}ATOM_PPLIB_ACP_Table;
+
+typedef struct _ATOM_PowerTune_Table{
+    USHORT usTDP;
+    USHORT usConfigurableTDP;
+    USHORT usTDC;
+    USHORT usBatteryPowerLimit;
+    USHORT usSmallPowerLimit;
+    USHORT usLowCACLeakage;
+    USHORT usHighCACLeakage;
+}ATOM_PowerTune_Table;
+
+typedef struct _ATOM_PPLIB_POWERTUNE_Table
+{
+      UCHAR revid;
+      ATOM_PowerTune_Table power_tune_table;
+}ATOM_PPLIB_POWERTUNE_Table;
+
+typedef struct _ATOM_PPLIB_POWERTUNE_Table_V1
+{
+      UCHAR revid;
+      ATOM_PowerTune_Table power_tune_table;
+      USHORT usMaximumPowerDeliveryLimit;
+      USHORT usTjMax;
+      USHORT usReserve[6];
+} ATOM_PPLIB_POWERTUNE_Table_V1;
+
+#define ATOM_PPM_A_A    1
+#define ATOM_PPM_A_I    2
+typedef struct _ATOM_PPLIB_PPM_Table
+{
+      UCHAR  ucRevId;
+      UCHAR  ucPpmDesign;          //A+I or A+A
+      USHORT usCpuCoreNumber;
+      ULONG  ulPlatformTDP;
+      ULONG  ulSmallACPlatformTDP;
+      ULONG  ulPlatformTDC;
+      ULONG  ulSmallACPlatformTDC;
+      ULONG  ulApuTDP;
+      ULONG  ulDGpuTDP;  
+      ULONG  ulDGpuUlvPower;
+      ULONG  ulTjmax;
+} ATOM_PPLIB_PPM_Table;
+
+#define    VQ_DisplayConfig_NoneAWD   1
+#define    VQ_DisplayConfig_AWD       2
+
+typedef struct ATOM_PPLIB_VQ_Budgeting_Record{
+    ULONG ulDeviceID;
+    ULONG ulSustainableSOCPowerLimitLow; /* in mW */
+    ULONG ulSustainableSOCPowerLimitHigh; /* in mW */
+
+    ULONG ulDClk;
+    ULONG ulEClk;
+    ULONG ulDispSclk;
+    UCHAR ucDispConfig;
+
+} ATOM_PPLIB_VQ_Budgeting_Record;
+
+typedef struct ATOM_PPLIB_VQ_Budgeting_Table {
+    UCHAR revid;
+    UCHAR numEntries;
+    ATOM_PPLIB_VQ_Budgeting_Record         entries[1];
+} ATOM_PPLIB_VQ_Budgeting_Table;
+
+#pragma pack()
+
+#endif