Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 474 insertions, 0 deletions

diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_thermal.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_thermal.c
new file mode 100644
index 000000000..a6c3610db
--- /dev/null
+++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_thermal.c
@@ -0,0 +1,474 @@
+/*
+ * Copyright 2016 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#include <asm/div64.h>
+#include "smu7_thermal.h"
+#include "smu7_hwmgr.h"
+#include "smu7_common.h"
+
+int smu7_fan_ctrl_get_fan_speed_info(struct pp_hwmgr *hwmgr,
+		struct phm_fan_speed_info *fan_speed_info)
+{
+	if (hwmgr->thermal_controller.fanInfo.bNoFan)
+		return -ENODEV;
+
+	fan_speed_info->supports_percent_read = true;
+	fan_speed_info->supports_percent_write = true;
+	fan_speed_info->min_percent = 0;
+	fan_speed_info->max_percent = 100;
+
+	if (PP_CAP(PHM_PlatformCaps_FanSpeedInTableIsRPM) &&
+	    hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution) {
+		fan_speed_info->supports_rpm_read = true;
+		fan_speed_info->supports_rpm_write = true;
+		fan_speed_info->min_rpm = hwmgr->thermal_controller.fanInfo.ulMinRPM;
+		fan_speed_info->max_rpm = hwmgr->thermal_controller.fanInfo.ulMaxRPM;
+	} else {
+		fan_speed_info->min_rpm = 0;
+		fan_speed_info->max_rpm = 0;
+	}
+
+	return 0;
+}
+
+int smu7_fan_ctrl_get_fan_speed_pwm(struct pp_hwmgr *hwmgr,
+		uint32_t *speed)
+{
+	uint32_t duty100;
+	uint32_t duty;
+	uint64_t tmp64;
+
+	if (hwmgr->thermal_controller.fanInfo.bNoFan)
+		return -ENODEV;
+
+	duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_FDO_CTRL1, FMAX_DUTY100);
+	duty = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_THERMAL_STATUS, FDO_PWM_DUTY);
+
+	if (duty100 == 0)
+		return -EINVAL;
+
+
+	tmp64 = (uint64_t)duty * 255;
+	do_div(tmp64, duty100);
+	*speed = MIN((uint32_t)tmp64, 255);
+
+	return 0;
+}
+
+int smu7_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed)
+{
+	uint32_t tach_period;
+	uint32_t crystal_clock_freq;
+
+	if (hwmgr->thermal_controller.fanInfo.bNoFan ||
+	    !hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution)
+		return -ENODEV;
+
+	tach_period = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_TACH_STATUS, TACH_PERIOD);
+
+	if (tach_period == 0)
+		return -EINVAL;
+
+	crystal_clock_freq = amdgpu_asic_get_xclk((struct amdgpu_device *)hwmgr->adev);
+
+	*speed = 60 * crystal_clock_freq * 10000 / tach_period;
+
+	return 0;
+}
+
+/**
+ * smu7_fan_ctrl_set_static_mode - Set Fan Speed Control to static mode, so that the user can decide what speed to use.
+ * @hwmgr:  the address of the powerplay hardware manager.
+ * @mode:   the fan control mode, 0 default, 1 by percent, 5, by RPM
+ * Exception: Should always succeed.
+ */
+int smu7_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode)
+{
+	if (hwmgr->fan_ctrl_is_in_default_mode) {
+		hwmgr->fan_ctrl_default_mode =
+				PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+						CG_FDO_CTRL2, FDO_PWM_MODE);
+		hwmgr->tmin =
+				PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+						CG_FDO_CTRL2, TMIN);
+		hwmgr->fan_ctrl_is_in_default_mode = false;
+	}
+
+	PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_FDO_CTRL2, TMIN, 0);
+	PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_FDO_CTRL2, FDO_PWM_MODE, mode);
+
+	return 0;
+}
+
+/**
+ * smu7_fan_ctrl_set_default_mode - Reset Fan Speed Control to default mode.
+ * @hwmgr:  the address of the powerplay hardware manager.
+ * Exception: Should always succeed.
+ */
+int smu7_fan_ctrl_set_default_mode(struct pp_hwmgr *hwmgr)
+{
+	if (!hwmgr->fan_ctrl_is_in_default_mode) {
+		PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+				CG_FDO_CTRL2, FDO_PWM_MODE, hwmgr->fan_ctrl_default_mode);
+		PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+				CG_FDO_CTRL2, TMIN, hwmgr->tmin);
+		hwmgr->fan_ctrl_is_in_default_mode = true;
+	}
+
+	return 0;
+}
+
+int smu7_fan_ctrl_start_smc_fan_control(struct pp_hwmgr *hwmgr)
+{
+	int result;
+
+	if (PP_CAP(PHM_PlatformCaps_ODFuzzyFanControlSupport)) {
+		result = smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_StartFanControl,
+					FAN_CONTROL_FUZZY, NULL);
+
+		if (PP_CAP(PHM_PlatformCaps_FanSpeedInTableIsRPM))
+			hwmgr->hwmgr_func->set_max_fan_rpm_output(hwmgr,
+					hwmgr->thermal_controller.
+					advanceFanControlParameters.usMaxFanRPM);
+		else
+			hwmgr->hwmgr_func->set_max_fan_pwm_output(hwmgr,
+					hwmgr->thermal_controller.
+					advanceFanControlParameters.usMaxFanPWM);
+
+	} else {
+		result = smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_StartFanControl,
+					FAN_CONTROL_TABLE, NULL);
+	}
+
+	if (!result && hwmgr->thermal_controller.
+			advanceFanControlParameters.ucTargetTemperature)
+		result = smum_send_msg_to_smc_with_parameter(hwmgr,
+				PPSMC_MSG_SetFanTemperatureTarget,
+				hwmgr->thermal_controller.
+				advanceFanControlParameters.ucTargetTemperature,
+				NULL);
+
+	if (!result &&
+	    (hwmgr->chip_id == CHIP_POLARIS10 ||
+	    hwmgr->chip_id == CHIP_POLARIS11 ||
+	    hwmgr->chip_id == CHIP_POLARIS12) &&
+	    hwmgr->thermal_controller.advanceFanControlParameters.ucEnableZeroRPM &&
+	    !PP_CAP(PHM_PlatformCaps_customThermalManagement))
+		result = smum_send_msg_to_smc(hwmgr,
+				PPSMC_MSG_EnableZeroRpm,
+				NULL);
+
+	hwmgr->fan_ctrl_enabled = true;
+
+	return result;
+}
+
+
+int smu7_fan_ctrl_stop_smc_fan_control(struct pp_hwmgr *hwmgr)
+{
+	hwmgr->fan_ctrl_enabled = false;
+	return smum_send_msg_to_smc(hwmgr, PPSMC_StopFanControl, NULL);
+}
+
+/**
+ * smu7_fan_ctrl_set_fan_speed_pwm - Set Fan Speed in PWM.
+ * @hwmgr: the address of the powerplay hardware manager.
+ * @speed: is the pwm value (0 - 255) to be set.
+ */
+int smu7_fan_ctrl_set_fan_speed_pwm(struct pp_hwmgr *hwmgr,
+		uint32_t speed)
+{
+	uint32_t duty100;
+	uint32_t duty;
+	uint64_t tmp64;
+
+	if (hwmgr->thermal_controller.fanInfo.bNoFan)
+		return 0;
+
+	speed = MIN(speed, 255);
+
+	if (PP_CAP(PHM_PlatformCaps_MicrocodeFanControl))
+		smu7_fan_ctrl_stop_smc_fan_control(hwmgr);
+
+	duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_FDO_CTRL1, FMAX_DUTY100);
+
+	if (duty100 == 0)
+		return -EINVAL;
+
+	tmp64 = (uint64_t)speed * duty100;
+	do_div(tmp64, 255);
+	duty = (uint32_t)tmp64;
+
+	PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_FDO_CTRL0, FDO_STATIC_DUTY, duty);
+
+	return smu7_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
+}
+
+/**
+* smu7_fan_ctrl_reset_fan_speed_to_default - Reset Fan Speed to default.
+* @hwmgr:  the address of the powerplay hardware manager.
+* Exception: Always succeeds.
+*/
+int smu7_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr)
+{
+	int result;
+
+	if (hwmgr->thermal_controller.fanInfo.bNoFan)
+		return 0;
+
+	if (PP_CAP(PHM_PlatformCaps_MicrocodeFanControl)) {
+		result = smu7_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
+		if (!result)
+			result = smu7_fan_ctrl_start_smc_fan_control(hwmgr);
+	} else
+		result = smu7_fan_ctrl_set_default_mode(hwmgr);
+
+	return result;
+}
+
+/**
+ * smu7_fan_ctrl_set_fan_speed_rpm - Set Fan Speed in RPM.
+ * @hwmgr: the address of the powerplay hardware manager.
+ * @speed: is the percentage value (min - max) to be set.
+ * Exception: Fails is the speed not lie between min and max.
+ */
+int smu7_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed)
+{
+	uint32_t tach_period;
+	uint32_t crystal_clock_freq;
+
+	if (hwmgr->thermal_controller.fanInfo.bNoFan ||
+			(hwmgr->thermal_controller.fanInfo.
+			ucTachometerPulsesPerRevolution == 0) ||
+			speed == 0 ||
+			(speed < hwmgr->thermal_controller.fanInfo.ulMinRPM) ||
+			(speed > hwmgr->thermal_controller.fanInfo.ulMaxRPM))
+		return 0;
+
+	if (PP_CAP(PHM_PlatformCaps_MicrocodeFanControl))
+		smu7_fan_ctrl_stop_smc_fan_control(hwmgr);
+
+	crystal_clock_freq = amdgpu_asic_get_xclk((struct amdgpu_device *)hwmgr->adev);
+
+	tach_period = 60 * crystal_clock_freq * 10000 / (8 * speed);
+
+	PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+				CG_TACH_CTRL, TARGET_PERIOD, tach_period);
+
+	return smu7_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC_RPM);
+}
+
+/**
+ * smu7_thermal_get_temperature - Reads the remote temperature from the SIslands thermal controller.
+ *
+ * @hwmgr: The address of the hardware manager.
+ */
+int smu7_thermal_get_temperature(struct pp_hwmgr *hwmgr)
+{
+	int temp;
+
+	temp = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_MULT_THERMAL_STATUS, CTF_TEMP);
+
+	/* Bit 9 means the reading is lower than the lowest usable value. */
+	if (temp & 0x200)
+		temp = SMU7_THERMAL_MAXIMUM_TEMP_READING;
+	else
+		temp = temp & 0x1ff;
+
+	temp *= PP_TEMPERATURE_UNITS_PER_CENTIGRADES;
+
+	return temp;
+}
+
+/**
+ * smu7_thermal_set_temperature_range - Set the requested temperature range for high and low alert signals
+ *
+ * @hwmgr: The address of the hardware manager.
+ * @low_temp: Temperature to be programmed for high alert signals
+ * @high_temp: Temperature to be programmed for low alert signals
+ * Exception: PP_Result_BadInput if the input data is not valid.
+ */
+static int smu7_thermal_set_temperature_range(struct pp_hwmgr *hwmgr,
+		int low_temp, int high_temp)
+{
+	int low = SMU7_THERMAL_MINIMUM_ALERT_TEMP *
+			PP_TEMPERATURE_UNITS_PER_CENTIGRADES;
+	int high = SMU7_THERMAL_MAXIMUM_ALERT_TEMP *
+			PP_TEMPERATURE_UNITS_PER_CENTIGRADES;
+
+	if (low < low_temp)
+		low = low_temp;
+	if (high > high_temp)
+		high = high_temp;
+
+	if (low > high)
+		return -EINVAL;
+
+	PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_THERMAL_INT, DIG_THERM_INTH,
+			(high / PP_TEMPERATURE_UNITS_PER_CENTIGRADES));
+	PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_THERMAL_INT, DIG_THERM_INTL,
+			(low / PP_TEMPERATURE_UNITS_PER_CENTIGRADES));
+	PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_THERMAL_CTRL, DIG_THERM_DPM,
+			(high / PP_TEMPERATURE_UNITS_PER_CENTIGRADES));
+
+	return 0;
+}
+
+/**
+ * smu7_thermal_initialize - Programs thermal controller one-time setting registers
+ *
+ * @hwmgr: The address of the hardware manager.
+ */
+static int smu7_thermal_initialize(struct pp_hwmgr *hwmgr)
+{
+	if (hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution)
+		PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+				CG_TACH_CTRL, EDGE_PER_REV,
+				hwmgr->thermal_controller.fanInfo.
+				ucTachometerPulsesPerRevolution - 1);
+
+	PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_FDO_CTRL2, TACH_PWM_RESP_RATE, 0x28);
+
+	return 0;
+}
+
+/**
+ * smu7_thermal_enable_alert - Enable thermal alerts on the RV770 thermal controller.
+ *
+ * @hwmgr: The address of the hardware manager.
+ */
+static void smu7_thermal_enable_alert(struct pp_hwmgr *hwmgr)
+{
+	uint32_t alert;
+
+	alert = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_THERMAL_INT, THERM_INT_MASK);
+	alert &= ~(SMU7_THERMAL_HIGH_ALERT_MASK | SMU7_THERMAL_LOW_ALERT_MASK);
+	PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_THERMAL_INT, THERM_INT_MASK, alert);
+
+	/* send message to SMU to enable internal thermal interrupts */
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_Thermal_Cntl_Enable, NULL);
+}
+
+/**
+ * smu7_thermal_disable_alert - Disable thermal alerts on the RV770 thermal controller.
+ * @hwmgr: The address of the hardware manager.
+ */
+int smu7_thermal_disable_alert(struct pp_hwmgr *hwmgr)
+{
+	uint32_t alert;
+
+	alert = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_THERMAL_INT, THERM_INT_MASK);
+	alert |= (SMU7_THERMAL_HIGH_ALERT_MASK | SMU7_THERMAL_LOW_ALERT_MASK);
+	PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+			CG_THERMAL_INT, THERM_INT_MASK, alert);
+
+	/* send message to SMU to disable internal thermal interrupts */
+	return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_Thermal_Cntl_Disable, NULL);
+}
+
+/**
+ * smu7_thermal_stop_thermal_controller - Uninitialize the thermal controller.
+ * Currently just disables alerts.
+ * @hwmgr: The address of the hardware manager.
+ */
+int smu7_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr)
+{
+	int result = smu7_thermal_disable_alert(hwmgr);
+
+	if (!hwmgr->thermal_controller.fanInfo.bNoFan)
+		smu7_fan_ctrl_set_default_mode(hwmgr);
+
+	return result;
+}
+
+/**
+ * smu7_thermal_start_smc_fan_control - Start the fan control on the SMC.
+ * @hwmgr:  the address of the powerplay hardware manager.
+ * Return:   result from set temperature range routine
+ */
+static int smu7_thermal_start_smc_fan_control(struct pp_hwmgr *hwmgr)
+{
+/* If the fantable setup has failed we could have disabled
+ * PHM_PlatformCaps_MicrocodeFanControl even after
+ * this function was included in the table.
+ * Make sure that we still think controlling the fan is OK.
+*/
+	if (PP_CAP(PHM_PlatformCaps_MicrocodeFanControl)) {
+		smu7_fan_ctrl_start_smc_fan_control(hwmgr);
+		smu7_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
+	}
+
+	return 0;
+}
+
+int smu7_start_thermal_controller(struct pp_hwmgr *hwmgr,
+				struct PP_TemperatureRange *range)
+{
+	int ret = 0;
+
+	if (range == NULL)
+		return -EINVAL;
+
+	smu7_thermal_initialize(hwmgr);
+	ret = smu7_thermal_set_temperature_range(hwmgr, range->min, range->max);
+	if (ret)
+		return -EINVAL;
+	smu7_thermal_enable_alert(hwmgr);
+	ret = smum_thermal_avfs_enable(hwmgr);
+	if (ret)
+		return -EINVAL;
+
+/* We should restrict performance levels to low before we halt the SMC.
+ * On the other hand we are still in boot state when we do this
+ * so it would be pointless.
+ * If this assumption changes we have to revisit this table.
+ */
+	smum_thermal_setup_fan_table(hwmgr);
+	smu7_thermal_start_smc_fan_control(hwmgr);
+	return 0;
+}
+
+
+
+int smu7_thermal_ctrl_uninitialize_thermal_controller(struct pp_hwmgr *hwmgr)
+{
+	if (!hwmgr->thermal_controller.fanInfo.bNoFan)
+		smu7_fan_ctrl_set_default_mode(hwmgr);
+	return 0;
+}
+