Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 541 insertions, 0 deletions

diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h b/drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h
new file mode 100644
index 000000000..e80172a0b
--- /dev/null
+++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h
@@ -0,0 +1,541 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) COPYRIGHT 2018 ARM Limited. All rights reserved.
+ * Author: James.Qian.Wang <james.qian.wang@arm.com>
+ *
+ */
+#ifndef _D71_REG_H_
+#define _D71_REG_H_
+
+/* Common block registers offset */
+#define BLK_BLOCK_INFO		0x000
+#define BLK_PIPELINE_INFO	0x004
+#define BLK_MAX_LINE_SIZE	0x008
+#define BLK_VALID_INPUT_ID0	0x020
+#define BLK_OUTPUT_ID0		0x060
+#define BLK_INPUT_ID0		0x080
+#define BLK_IRQ_RAW_STATUS	0x0A0
+#define BLK_IRQ_CLEAR		0x0A4
+#define BLK_IRQ_MASK		0x0A8
+#define BLK_IRQ_STATUS		0x0AC
+#define BLK_STATUS		0x0B0
+#define BLK_INFO		0x0C0
+#define BLK_CONTROL		0x0D0
+#define BLK_SIZE		0x0D4
+#define BLK_IN_SIZE		0x0E0
+
+#define BLK_P0_PTR_LOW		0x100
+#define BLK_P0_PTR_HIGH		0x104
+#define BLK_P0_STRIDE		0x108
+#define BLK_P1_PTR_LOW		0x110
+#define BLK_P1_PTR_HIGH		0x114
+#define BLK_P1_STRIDE		0x118
+#define BLK_P2_PTR_LOW		0x120
+#define BLK_P2_PTR_HIGH		0x124
+
+#define BLOCK_INFO_N_SUBBLKS(x)	((x) & 0x000F)
+#define BLOCK_INFO_BLK_ID(x)	(((x) & 0x00F0) >> 4)
+#define BLOCK_INFO_BLK_TYPE(x)	(((x) & 0xFF00) >> 8)
+#define BLOCK_INFO_INPUT_ID(x)	((x) & 0xFFF0)
+#define BLOCK_INFO_TYPE_ID(x)	(((x) & 0x0FF0) >> 4)
+
+#define PIPELINE_INFO_N_OUTPUTS(x)	((x) & 0x000F)
+#define PIPELINE_INFO_N_VALID_INPUTS(x)	(((x) & 0x0F00) >> 8)
+
+/* Common block control register bits */
+#define BLK_CTRL_EN		BIT(0)
+/* Common size macro */
+#define HV_SIZE(h, v)		(((h) & 0x1FFF) + (((v) & 0x1FFF) << 16))
+#define HV_OFFSET(h, v)		(((h) & 0xFFF) + (((v) & 0xFFF) << 16))
+#define HV_CROP(h, v)		(((h) & 0xFFF) + (((v) & 0xFFF) << 16))
+
+/* AD_CONTROL register */
+#define AD_CONTROL		0x160
+
+/* AD_CONTROL register bits */
+#define AD_AEN			BIT(0)
+#define AD_YT			BIT(1)
+#define AD_BS			BIT(2)
+#define AD_WB			BIT(3)
+#define AD_TH			BIT(4)
+
+/* Global Control Unit */
+#define GLB_ARCH_ID		0x000
+#define GLB_CORE_ID		0x004
+#define GLB_CORE_INFO		0x008
+#define GLB_IRQ_STATUS		0x010
+
+#define GCU_CONFIG_VALID0	0x0D4
+#define GCU_CONFIG_VALID1	0x0D8
+
+/* GCU_CONTROL_BITS */
+#define GCU_CONTROL_MODE(x)	((x) & 0x7)
+#define GCU_CONTROL_SRST	BIT(16)
+
+/* GCU_CONFIGURATION registers */
+#define GCU_CONFIGURATION_ID0	0x100
+#define GCU_CONFIGURATION_ID1	0x104
+
+/* GCU configuration */
+#define GCU_MAX_LINE_SIZE(x)	((x) & 0xFFFF)
+#define GCU_MAX_NUM_LINES(x)	((x) >> 16)
+#define GCU_NUM_RICH_LAYERS(x)	((x) & 0x7)
+#define GCU_NUM_PIPELINES(x)	(((x) >> 3) & 0x7)
+#define GCU_NUM_SCALERS(x)	(((x) >> 6) & 0x7)
+#define GCU_DISPLAY_SPLIT_EN(x)	(((x) >> 16) & 0x1)
+#define GCU_DISPLAY_TBU_EN(x)	(((x) >> 17) & 0x1)
+
+/* GCU opmode */
+#define INACTIVE_MODE		0
+#define TBU_CONNECT_MODE	1
+#define TBU_DISCONNECT_MODE	2
+#define DO0_ACTIVE_MODE		3
+#define DO1_ACTIVE_MODE		4
+#define DO01_ACTIVE_MODE	5
+
+/* GLB_IRQ_STATUS bits */
+#define GLB_IRQ_STATUS_GCU	BIT(0)
+#define GLB_IRQ_STATUS_LPU0	BIT(8)
+#define GLB_IRQ_STATUS_LPU1	BIT(9)
+#define GLB_IRQ_STATUS_ATU0	BIT(10)
+#define GLB_IRQ_STATUS_ATU1	BIT(11)
+#define GLB_IRQ_STATUS_ATU2	BIT(12)
+#define GLB_IRQ_STATUS_ATU3	BIT(13)
+#define GLB_IRQ_STATUS_CU0	BIT(16)
+#define GLB_IRQ_STATUS_CU1	BIT(17)
+#define GLB_IRQ_STATUS_DOU0	BIT(24)
+#define GLB_IRQ_STATUS_DOU1	BIT(25)
+
+#define GLB_IRQ_STATUS_PIPE0	(GLB_IRQ_STATUS_LPU0 |\
+				 GLB_IRQ_STATUS_ATU0 |\
+				 GLB_IRQ_STATUS_ATU1 |\
+				 GLB_IRQ_STATUS_CU0 |\
+				 GLB_IRQ_STATUS_DOU0)
+
+#define GLB_IRQ_STATUS_PIPE1	(GLB_IRQ_STATUS_LPU1 |\
+				 GLB_IRQ_STATUS_ATU2 |\
+				 GLB_IRQ_STATUS_ATU3 |\
+				 GLB_IRQ_STATUS_CU1 |\
+				 GLB_IRQ_STATUS_DOU1)
+
+#define GLB_IRQ_STATUS_ATU	(GLB_IRQ_STATUS_ATU0 |\
+				 GLB_IRQ_STATUS_ATU1 |\
+				 GLB_IRQ_STATUS_ATU2 |\
+				 GLB_IRQ_STATUS_ATU3)
+
+/* GCU_IRQ_BITS */
+#define GCU_IRQ_CVAL0		BIT(0)
+#define GCU_IRQ_CVAL1		BIT(1)
+#define GCU_IRQ_MODE		BIT(4)
+#define GCU_IRQ_ERR		BIT(11)
+
+/* GCU_STATUS_BITS */
+#define GCU_STATUS_MODE(x)	((x) & 0x7)
+#define GCU_STATUS_MERR		BIT(4)
+#define GCU_STATUS_TCS0		BIT(8)
+#define GCU_STATUS_TCS1		BIT(9)
+#define GCU_STATUS_ACTIVE	BIT(31)
+
+/* GCU_CONFIG_VALIDx BITS */
+#define GCU_CONFIG_CVAL		BIT(0)
+
+/* PERIPHERAL registers */
+#define PERIPH_MAX_LINE_SIZE	BIT(0)
+#define PERIPH_NUM_RICH_LAYERS	BIT(4)
+#define PERIPH_SPLIT_EN		BIT(8)
+#define PERIPH_TBU_EN		BIT(12)
+#define PERIPH_AFBC_DMA_EN	BIT(16)
+#define PERIPH_CONFIGURATION_ID	0x1D4
+
+/* LPU register */
+#define LPU_TBU_STATUS		0x0B4
+#define LPU_RAXI_CONTROL	0x0D0
+#define LPU_WAXI_CONTROL	0x0D4
+#define LPU_TBU_CONTROL		0x0D8
+
+/* LPU_xAXI_CONTROL_BITS */
+#define TO_RAXI_AOUTSTDCAPB(x)	(x)
+#define TO_RAXI_BOUTSTDCAPB(x)	((x) << 8)
+#define TO_RAXI_BEN(x)		((x) << 15)
+#define TO_xAXI_BURSTLEN(x)	((x) << 16)
+#define TO_xAXI_AxQOS(x)	((x) << 24)
+#define TO_xAXI_ORD(x)		((x) << 31)
+#define TO_WAXI_OUTSTDCAPB(x)	(x)
+
+#define RAXI_AOUTSTDCAPB_MASK	0x7F
+#define RAXI_BOUTSTDCAPB_MASK	0x7F00
+#define RAXI_BEN_MASK		BIT(15)
+#define xAXI_BURSTLEN_MASK	0x3F0000
+#define xAXI_AxQOS_MASK		0xF000000
+#define xAXI_ORD_MASK		BIT(31)
+#define WAXI_OUTSTDCAPB_MASK	0x3F
+
+/* LPU_TBU_CONTROL BITS */
+#define TO_TBU_DOUTSTDCAPB(x)	(x)
+#define TBU_DOUTSTDCAPB_MASK	0x3F
+
+/* LPU_IRQ_BITS */
+#define LPU_IRQ_OVR		BIT(9)
+#define LPU_IRQ_IBSY		BIT(10)
+#define LPU_IRQ_ERR		BIT(11)
+#define LPU_IRQ_EOW		BIT(12)
+#define LPU_IRQ_PL0		BIT(13)
+
+/* LPU_STATUS_BITS */
+#define LPU_STATUS_AXIED(x)	((x) & 0xF)
+#define LPU_STATUS_AXIE		BIT(4)
+#define LPU_STATUS_AXIRP	BIT(5)
+#define LPU_STATUS_AXIWP	BIT(6)
+#define LPU_STATUS_FEMPTY	BIT(11)
+#define LPU_STATUS_FFULL	BIT(14)
+#define LPU_STATUS_ACE0		BIT(16)
+#define LPU_STATUS_ACE1		BIT(17)
+#define LPU_STATUS_ACE2		BIT(18)
+#define LPU_STATUS_ACE3		BIT(19)
+#define LPU_STATUS_ACTIVE	BIT(31)
+
+#define AXIEID_MASK		0xF
+#define AXIE_MASK		LPU_STATUS_AXIE
+#define AXIRP_MASK		LPU_STATUS_AXIRP
+#define AXIWP_MASK		LPU_STATUS_AXIWP
+
+#define FROM_AXIEID(reg)	((reg) & AXIEID_MASK)
+#define TO_AXIE(x)		((x) << 4)
+#define FROM_AXIRP(reg)		(((reg) & AXIRP_MASK) >> 5)
+#define FROM_AXIWP(reg)		(((reg) & AXIWP_MASK) >> 6)
+
+/* LPU_TBU_STATUS_BITS */
+#define LPU_TBU_STATUS_TCF	BIT(1)
+#define LPU_TBU_STATUS_TTNG	BIT(2)
+#define LPU_TBU_STATUS_TITR	BIT(8)
+#define LPU_TBU_STATUS_TEMR	BIT(16)
+#define LPU_TBU_STATUS_TTF	BIT(31)
+
+/* LPU_TBU_CONTROL BITS */
+#define LPU_TBU_CTRL_TLBPEN	BIT(16)
+
+/* CROSSBAR CONTROL BITS */
+#define CBU_INPUT_CTRL_EN	BIT(0)
+#define CBU_NUM_INPUT_IDS	5
+#define CBU_NUM_OUTPUT_IDS	5
+
+/* CU register */
+#define CU_BG_COLOR		0x0DC
+#define CU_INPUT0_SIZE		0x0E0
+#define CU_INPUT0_OFFSET	0x0E4
+#define CU_INPUT0_CONTROL	0x0E8
+#define CU_INPUT1_SIZE		0x0F0
+#define CU_INPUT1_OFFSET	0x0F4
+#define CU_INPUT1_CONTROL	0x0F8
+#define CU_INPUT2_SIZE		0x100
+#define CU_INPUT2_OFFSET	0x104
+#define CU_INPUT2_CONTROL	0x108
+#define CU_INPUT3_SIZE		0x110
+#define CU_INPUT3_OFFSET	0x114
+#define CU_INPUT3_CONTROL	0x118
+#define CU_INPUT4_SIZE		0x120
+#define CU_INPUT4_OFFSET	0x124
+#define CU_INPUT4_CONTROL	0x128
+
+#define CU_PER_INPUT_REGS	4
+
+#define CU_NUM_INPUT_IDS	5
+#define CU_NUM_OUTPUT_IDS	1
+
+/* CU control register bits */
+#define CU_CTRL_COPROC		BIT(0)
+
+/* CU_IRQ_BITS */
+#define CU_IRQ_OVR		BIT(9)
+#define CU_IRQ_ERR		BIT(11)
+
+/* CU_STATUS_BITS */
+#define CU_STATUS_CPE		BIT(0)
+#define CU_STATUS_ZME		BIT(1)
+#define CU_STATUS_CFGE		BIT(2)
+#define CU_STATUS_ACTIVE	BIT(31)
+
+/* CU input control register bits */
+#define CU_INPUT_CTRL_EN	BIT(0)
+#define CU_INPUT_CTRL_PAD	BIT(1)
+#define CU_INPUT_CTRL_PMUL	BIT(2)
+#define CU_INPUT_CTRL_ALPHA(x)	(((x) & 0xFF) << 8)
+
+/* DOU register */
+
+/* DOU_IRQ_BITS */
+#define DOU_IRQ_UND		BIT(8)
+#define DOU_IRQ_ERR		BIT(11)
+#define DOU_IRQ_PL0		BIT(13)
+#define DOU_IRQ_PL1		BIT(14)
+
+/* DOU_STATUS_BITS */
+#define DOU_STATUS_DRIFTTO	BIT(0)
+#define DOU_STATUS_FRAMETO	BIT(1)
+#define DOU_STATUS_TETO		BIT(2)
+#define DOU_STATUS_CSCE		BIT(8)
+#define DOU_STATUS_ACTIVE	BIT(31)
+
+/* Layer registers */
+#define LAYER_INFO		0x0C0
+#define LAYER_R_CONTROL		0x0D4
+#define LAYER_FMT		0x0D8
+#define LAYER_LT_COEFFTAB	0x0DC
+#define LAYER_PALPHA		0x0E4
+
+#define LAYER_YUV_RGB_COEFF0	0x130
+
+#define LAYER_AD_H_CROP		0x164
+#define LAYER_AD_V_CROP		0x168
+
+#define LAYER_RGB_RGB_COEFF0	0x170
+
+/* L_CONTROL_BITS */
+#define L_EN			BIT(0)
+#define L_IT			BIT(4)
+#define L_R2R			BIT(5)
+#define L_FT			BIT(6)
+#define L_ROT(x)		(((x) & 3) << 8)
+#define L_HFLIP			BIT(10)
+#define L_VFLIP			BIT(11)
+#define L_TBU_EN		BIT(16)
+#define L_A_RCACHE(x)		(((x) & 0xF) << 28)
+#define L_ROT_R0		0
+#define L_ROT_R90		1
+#define L_ROT_R180		2
+#define L_ROT_R270		3
+
+/* LAYER_R_CONTROL BITS */
+#define LR_CHI422_BILINEAR	0
+#define LR_CHI422_REPLICATION	1
+#define LR_CHI420_JPEG		(0 << 2)
+#define LR_CHI420_MPEG		(1 << 2)
+
+#define L_ITSEL(x)		((x) & 0xFFF)
+#define L_FTSEL(x)		(((x) & 0xFFF) << 16)
+
+#define LAYER_PER_PLANE_REGS	4
+
+/* Layer_WR registers */
+#define LAYER_WR_PROG_LINE	0x0D4
+#define LAYER_WR_FORMAT		0x0D8
+
+/* Layer_WR control bits */
+#define LW_OFM			BIT(4)
+#define LW_LALPHA(x)		(((x) & 0xFF) << 8)
+#define LW_A_WCACHE(x)		(((x) & 0xF) << 28)
+#define LW_TBU_EN		BIT(16)
+
+#define AxCACHE_MASK		0xF0000000
+
+/* Layer AXI R/W cache setting */
+#define AxCACHE_B		BIT(0)	/* Bufferable */
+#define AxCACHE_M		BIT(1)	/* Modifiable */
+#define AxCACHE_RA		BIT(2)	/* Read-Allocate */
+#define AxCACHE_WA		BIT(3)	/* Write-Allocate */
+
+/* Layer info bits */
+#define L_INFO_RF		BIT(0)
+#define L_INFO_CM		BIT(1)
+#define L_INFO_ABUF_SIZE(x)	(((x) >> 4) & 0x7)
+#define L_INFO_YUV_MAX_LINESZ(x)	(((x) >> 16) & 0xFFFF)
+
+/* Scaler registers */
+#define SC_COEFFTAB		0x0DC
+#define SC_OUT_SIZE		0x0E4
+#define SC_H_CROP		0x0E8
+#define SC_V_CROP		0x0EC
+#define SC_H_INIT_PH		0x0F0
+#define SC_H_DELTA_PH		0x0F4
+#define SC_V_INIT_PH		0x0F8
+#define SC_V_DELTA_PH		0x0FC
+#define SC_ENH_LIMITS		0x130
+#define SC_ENH_COEFF0		0x134
+
+#define SC_MAX_ENH_COEFF	9
+
+/* SC_CTRL_BITS */
+#define SC_CTRL_SCL		BIT(0)
+#define SC_CTRL_LS		BIT(1)
+#define SC_CTRL_AP		BIT(4)
+#define SC_CTRL_IENH		BIT(8)
+#define SC_CTRL_RGBSM		BIT(16)
+#define SC_CTRL_ASM		BIT(17)
+
+#define SC_VTSEL(vtal)		((vtal) << 16)
+
+#define SC_NUM_INPUTS_IDS	1
+#define SC_NUM_OUTPUTS_IDS	1
+
+#define MG_NUM_INPUTS_IDS	2
+#define MG_NUM_OUTPUTS_IDS	1
+
+/* Merger registers */
+#define MG_INPUT_ID0		BLK_INPUT_ID0
+#define MG_INPUT_ID1		(MG_INPUT_ID0 + 4)
+#define MG_SIZE			BLK_SIZE
+
+/* Splitter registers */
+#define SP_OVERLAP_SIZE		0xD8
+
+/* Backend registers */
+#define BS_INFO			0x0C0
+#define BS_PROG_LINE		0x0D4
+#define BS_PREFETCH_LINE	0x0D8
+#define BS_BG_COLOR		0x0DC
+#define BS_ACTIVESIZE		0x0E0
+#define BS_HINTERVALS		0x0E4
+#define BS_VINTERVALS		0x0E8
+#define BS_SYNC			0x0EC
+#define BS_DRIFT_TO		0x100
+#define BS_FRAME_TO		0x104
+#define BS_TE_TO		0x108
+#define BS_T0_INTERVAL		0x110
+#define BS_T1_INTERVAL		0x114
+#define BS_T2_INTERVAL		0x118
+#define BS_CRC0_LOW		0x120
+#define BS_CRC0_HIGH		0x124
+#define BS_CRC1_LOW		0x128
+#define BS_CRC1_HIGH		0x12C
+#define BS_USER			0x130
+
+/* BS control register bits */
+#define BS_CTRL_EN		BIT(0)
+#define BS_CTRL_VM		BIT(1)
+#define BS_CTRL_BM		BIT(2)
+#define BS_CTRL_HMASK		BIT(4)
+#define BS_CTRL_VD		BIT(5)
+#define BS_CTRL_TE		BIT(8)
+#define BS_CTRL_TS		BIT(9)
+#define BS_CTRL_TM		BIT(12)
+#define BS_CTRL_DL		BIT(16)
+#define BS_CTRL_SBS		BIT(17)
+#define BS_CTRL_CRC		BIT(18)
+#define BS_CTRL_PM		BIT(20)
+
+/* BS active size/intervals */
+#define BS_H_INTVALS(hfp, hbp)	(((hfp) & 0xFFF) + (((hbp) & 0x3FF) << 16))
+#define BS_V_INTVALS(vfp, vbp)  (((vfp) & 0x3FFF) + (((vbp) & 0xFF) << 16))
+
+/* BS_SYNC bits */
+#define BS_SYNC_HSW(x)		((x) & 0x3FF)
+#define BS_SYNC_HSP		BIT(12)
+#define BS_SYNC_VSW(x)		(((x) & 0xFF) << 16)
+#define BS_SYNC_VSP		BIT(28)
+
+#define BS_NUM_INPUT_IDS	0
+#define BS_NUM_OUTPUT_IDS	0
+
+/* Image process registers */
+#define IPS_DEPTH		0x0D8
+#define IPS_RGB_RGB_COEFF0	0x130
+#define IPS_RGB_YUV_COEFF0	0x170
+
+#define IPS_DEPTH_MARK		0xF
+
+/* IPS control register bits */
+#define IPS_CTRL_RGB		BIT(0)
+#define IPS_CTRL_FT		BIT(4)
+#define IPS_CTRL_YUV		BIT(8)
+#define IPS_CTRL_CHD422		BIT(9)
+#define IPS_CTRL_CHD420		BIT(10)
+#define IPS_CTRL_LPF		BIT(11)
+#define IPS_CTRL_DITH		BIT(12)
+#define IPS_CTRL_CLAMP		BIT(16)
+#define IPS_CTRL_SBS		BIT(17)
+
+/* IPS info register bits */
+#define IPS_INFO_CHD420		BIT(10)
+
+#define IPS_NUM_INPUT_IDS	2
+#define IPS_NUM_OUTPUT_IDS	1
+
+/* FT_COEFF block registers */
+#define FT_COEFF0		0x80
+#define GLB_IT_COEFF		0x80
+
+/* GLB_SC_COEFF registers */
+#define GLB_SC_COEFF_ADDR	0x0080
+#define GLB_SC_COEFF_DATA	0x0084
+#define GLB_LT_COEFF_DATA	0x0080
+
+#define GLB_SC_COEFF_MAX_NUM	1024
+#define GLB_LT_COEFF_NUM	65
+/* GLB_SC_ADDR */
+#define SC_COEFF_R_ADDR		BIT(18)
+#define SC_COEFF_G_ADDR		BIT(17)
+#define SC_COEFF_B_ADDR		BIT(16)
+
+#define SC_COEFF_DATA(x, y)	(((y) & 0xFFFF) | (((x) & 0xFFFF) << 16))
+
+enum d71_blk_type {
+	D71_BLK_TYPE_GCU		= 0x00,
+	D71_BLK_TYPE_LPU		= 0x01,
+	D71_BLK_TYPE_CU			= 0x02,
+	D71_BLK_TYPE_DOU		= 0x03,
+	D71_BLK_TYPE_AEU		= 0x04,
+	D71_BLK_TYPE_GLB_LT_COEFF	= 0x05,
+	D71_BLK_TYPE_GLB_SCL_COEFF	= 0x06, /* SH/SV scaler coeff */
+	D71_BLK_TYPE_GLB_SC_COEFF	= 0x07,
+	D71_BLK_TYPE_PERIPH		= 0x08,
+	D71_BLK_TYPE_LPU_TRUSTED	= 0x09,
+	D71_BLK_TYPE_AEU_TRUSTED	= 0x0A,
+	D71_BLK_TYPE_LPU_LAYER		= 0x10,
+	D71_BLK_TYPE_LPU_WB_LAYER	= 0x11,
+	D71_BLK_TYPE_CU_SPLITTER	= 0x20,
+	D71_BLK_TYPE_CU_SCALER		= 0x21,
+	D71_BLK_TYPE_CU_MERGER		= 0x22,
+	D71_BLK_TYPE_DOU_IPS		= 0x30,
+	D71_BLK_TYPE_DOU_BS		= 0x31,
+	D71_BLK_TYPE_DOU_FT_COEFF	= 0x32,
+	D71_BLK_TYPE_AEU_DS		= 0x40,
+	D71_BLK_TYPE_AEU_AES		= 0x41,
+	D71_BLK_TYPE_RESERVED		= 0xFF
+};
+
+/* Constant of components */
+#define D71_MAX_PIPELINE		2
+#define D71_PIPELINE_MAX_SCALERS	2
+#define D71_PIPELINE_MAX_LAYERS		4
+
+#define D71_MAX_GLB_IT_COEFF		3
+#define D71_MAX_GLB_SCL_COEFF		4
+
+#define D71_MAX_LAYERS_PER_LPU		4
+#define D71_BLOCK_MAX_INPUT		9
+#define D71_BLOCK_MAX_OUTPUT		5
+#define D71_MAX_SC_PER_CU		2
+
+#define D71_BLOCK_OFFSET_PERIPH		0xFE00
+#define D71_BLOCK_SIZE			0x0200
+
+#define D71_DEFAULT_PREPRETCH_LINE	5
+#define D71_BUS_WIDTH_16_BYTES		16
+
+#define D71_SC_MAX_UPSCALING		64
+#define D71_SC_MAX_DOWNSCALING		6
+#define D71_SC_SPLIT_OVERLAP		8
+#define D71_SC_ENH_SPLIT_OVERLAP	1
+
+#define D71_MG_MIN_MERGED_SIZE		4
+#define D71_MG_MAX_MERGED_HSIZE		4032
+#define D71_MG_MAX_MERGED_VSIZE		4096
+
+#define D71_PALPHA_DEF_MAP		0xFFAA5500
+#define D71_LAYER_CONTROL_DEFAULT	0x30000000
+#define D71_WB_LAYER_CONTROL_DEFAULT	0x3000FF00
+#define D71_BS_CONTROL_DEFAULT		0x00000002
+
+struct block_header {
+	u32 block_info;
+	u32 pipeline_info;
+	u32 input_ids[D71_BLOCK_MAX_INPUT];
+	u32 output_ids[D71_BLOCK_MAX_OUTPUT];
+};
+
+static inline u32 get_block_type(struct block_header *blk)
+{
+	return BLOCK_INFO_BLK_TYPE(blk->block_info);
+}
+
+#endif /* !_D71_REG_H_ */