Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 644 insertions, 0 deletions

diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c b/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c
new file mode 100644
index 000000000..4cc07d6bb
--- /dev/null
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c
@@ -0,0 +1,644 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) COPYRIGHT 2018 ARM Limited. All rights reserved.
+ * Author: James.Qian.Wang <james.qian.wang@arm.com>
+ *
+ */
+#include <linux/clk.h>
+#include <linux/pm_runtime.h>
+#include <linux/spinlock.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_print.h>
+#include <drm/drm_vblank.h>
+
+#include "komeda_dev.h"
+#include "komeda_kms.h"
+
+void komeda_crtc_get_color_config(struct drm_crtc_state *crtc_st,
+				  u32 *color_depths, u32 *color_formats)
+{
+	struct drm_connector *conn;
+	struct drm_connector_state *conn_st;
+	u32 conn_color_formats = ~0u;
+	int i, min_bpc = 31, conn_bpc = 0;
+
+	for_each_new_connector_in_state(crtc_st->state, conn, conn_st, i) {
+		if (conn_st->crtc != crtc_st->crtc)
+			continue;
+
+		conn_bpc = conn->display_info.bpc ? conn->display_info.bpc : 8;
+		conn_color_formats &= conn->display_info.color_formats;
+
+		if (conn_bpc < min_bpc)
+			min_bpc = conn_bpc;
+	}
+
+	/* connector doesn't config any color_format, use RGB444 as default */
+	if (!conn_color_formats)
+		conn_color_formats = DRM_COLOR_FORMAT_RGB444;
+
+	*color_depths = GENMASK(min_bpc, 0);
+	*color_formats = conn_color_formats;
+}
+
+static void komeda_crtc_update_clock_ratio(struct komeda_crtc_state *kcrtc_st)
+{
+	u64 pxlclk, aclk;
+
+	if (!kcrtc_st->base.active) {
+		kcrtc_st->clock_ratio = 0;
+		return;
+	}
+
+	pxlclk = kcrtc_st->base.adjusted_mode.crtc_clock * 1000ULL;
+	aclk = komeda_crtc_get_aclk(kcrtc_st);
+
+	kcrtc_st->clock_ratio = div64_u64(aclk << 32, pxlclk);
+}
+
+/**
+ * komeda_crtc_atomic_check - build display output data flow
+ * @crtc: DRM crtc
+ * @state: the crtc state object
+ *
+ * crtc_atomic_check is the final check stage, so beside build a display data
+ * pipeline according to the crtc_state, but still needs to release or disable
+ * the unclaimed pipeline resources.
+ *
+ * RETURNS:
+ * Zero for success or -errno
+ */
+static int
+komeda_crtc_atomic_check(struct drm_crtc *crtc,
+			 struct drm_atomic_state *state)
+{
+	struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state,
+									  crtc);
+	struct komeda_crtc *kcrtc = to_kcrtc(crtc);
+	struct komeda_crtc_state *kcrtc_st = to_kcrtc_st(crtc_state);
+	int err;
+
+	if (drm_atomic_crtc_needs_modeset(crtc_state))
+		komeda_crtc_update_clock_ratio(kcrtc_st);
+
+	if (crtc_state->active) {
+		err = komeda_build_display_data_flow(kcrtc, kcrtc_st);
+		if (err)
+			return err;
+	}
+
+	/* release unclaimed pipeline resources */
+	err = komeda_release_unclaimed_resources(kcrtc->slave, kcrtc_st);
+	if (err)
+		return err;
+
+	err = komeda_release_unclaimed_resources(kcrtc->master, kcrtc_st);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+/* For active a crtc, mainly need two parts of preparation
+ * 1. adjust display operation mode.
+ * 2. enable needed clk
+ */
+static int
+komeda_crtc_prepare(struct komeda_crtc *kcrtc)
+{
+	struct komeda_dev *mdev = kcrtc->base.dev->dev_private;
+	struct komeda_pipeline *master = kcrtc->master;
+	struct komeda_crtc_state *kcrtc_st = to_kcrtc_st(kcrtc->base.state);
+	struct drm_display_mode *mode = &kcrtc_st->base.adjusted_mode;
+	u32 new_mode;
+	int err;
+
+	mutex_lock(&mdev->lock);
+
+	new_mode = mdev->dpmode | BIT(master->id);
+	if (WARN_ON(new_mode == mdev->dpmode)) {
+		err = 0;
+		goto unlock;
+	}
+
+	err = mdev->funcs->change_opmode(mdev, new_mode);
+	if (err) {
+		DRM_ERROR("failed to change opmode: 0x%x -> 0x%x.\n,",
+			  mdev->dpmode, new_mode);
+		goto unlock;
+	}
+
+	mdev->dpmode = new_mode;
+	/* Only need to enable aclk on single display mode, but no need to
+	 * enable aclk it on dual display mode, since the dual mode always
+	 * switch from single display mode, the aclk already enabled, no need
+	 * to enable it again.
+	 */
+	if (new_mode != KOMEDA_MODE_DUAL_DISP) {
+		err = clk_set_rate(mdev->aclk, komeda_crtc_get_aclk(kcrtc_st));
+		if (err)
+			DRM_ERROR("failed to set aclk.\n");
+		err = clk_prepare_enable(mdev->aclk);
+		if (err)
+			DRM_ERROR("failed to enable aclk.\n");
+	}
+
+	err = clk_set_rate(master->pxlclk, mode->crtc_clock * 1000);
+	if (err)
+		DRM_ERROR("failed to set pxlclk for pipe%d\n", master->id);
+	err = clk_prepare_enable(master->pxlclk);
+	if (err)
+		DRM_ERROR("failed to enable pxl clk for pipe%d.\n", master->id);
+
+unlock:
+	mutex_unlock(&mdev->lock);
+
+	return err;
+}
+
+static int
+komeda_crtc_unprepare(struct komeda_crtc *kcrtc)
+{
+	struct komeda_dev *mdev = kcrtc->base.dev->dev_private;
+	struct komeda_pipeline *master = kcrtc->master;
+	u32 new_mode;
+	int err;
+
+	mutex_lock(&mdev->lock);
+
+	new_mode = mdev->dpmode & (~BIT(master->id));
+
+	if (WARN_ON(new_mode == mdev->dpmode)) {
+		err = 0;
+		goto unlock;
+	}
+
+	err = mdev->funcs->change_opmode(mdev, new_mode);
+	if (err) {
+		DRM_ERROR("failed to change opmode: 0x%x -> 0x%x.\n,",
+			  mdev->dpmode, new_mode);
+		goto unlock;
+	}
+
+	mdev->dpmode = new_mode;
+
+	clk_disable_unprepare(master->pxlclk);
+	if (new_mode == KOMEDA_MODE_INACTIVE)
+		clk_disable_unprepare(mdev->aclk);
+
+unlock:
+	mutex_unlock(&mdev->lock);
+
+	return err;
+}
+
+void komeda_crtc_handle_event(struct komeda_crtc   *kcrtc,
+			      struct komeda_events *evts)
+{
+	struct drm_crtc *crtc = &kcrtc->base;
+	u32 events = evts->pipes[kcrtc->master->id];
+
+	if (events & KOMEDA_EVENT_VSYNC)
+		drm_crtc_handle_vblank(crtc);
+
+	if (events & KOMEDA_EVENT_EOW) {
+		struct komeda_wb_connector *wb_conn = kcrtc->wb_conn;
+
+		if (wb_conn)
+			drm_writeback_signal_completion(&wb_conn->base, 0);
+		else
+			DRM_WARN("CRTC[%d]: EOW happen but no wb_connector.\n",
+				 drm_crtc_index(&kcrtc->base));
+	}
+	/* will handle it together with the write back support */
+	if (events & KOMEDA_EVENT_EOW)
+		DRM_DEBUG("EOW.\n");
+
+	if (events & KOMEDA_EVENT_FLIP) {
+		unsigned long flags;
+		struct drm_pending_vblank_event *event;
+
+		spin_lock_irqsave(&crtc->dev->event_lock, flags);
+		if (kcrtc->disable_done) {
+			complete_all(kcrtc->disable_done);
+			kcrtc->disable_done = NULL;
+		} else if (crtc->state->event) {
+			event = crtc->state->event;
+			/*
+			 * Consume event before notifying drm core that flip
+			 * happened.
+			 */
+			crtc->state->event = NULL;
+			drm_crtc_send_vblank_event(crtc, event);
+		} else {
+			DRM_WARN("CRTC[%d]: FLIP happened but no pending commit.\n",
+				 drm_crtc_index(&kcrtc->base));
+		}
+		spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
+	}
+}
+
+static void
+komeda_crtc_do_flush(struct drm_crtc *crtc,
+		     struct drm_crtc_state *old)
+{
+	struct komeda_crtc *kcrtc = to_kcrtc(crtc);
+	struct komeda_crtc_state *kcrtc_st = to_kcrtc_st(crtc->state);
+	struct komeda_dev *mdev = kcrtc->base.dev->dev_private;
+	struct komeda_pipeline *master = kcrtc->master;
+	struct komeda_pipeline *slave = kcrtc->slave;
+	struct komeda_wb_connector *wb_conn = kcrtc->wb_conn;
+	struct drm_connector_state *conn_st;
+
+	DRM_DEBUG_ATOMIC("CRTC%d_FLUSH: active_pipes: 0x%x, affected: 0x%x.\n",
+			 drm_crtc_index(crtc),
+			 kcrtc_st->active_pipes, kcrtc_st->affected_pipes);
+
+	/* step 1: update the pipeline/component state to HW */
+	if (has_bit(master->id, kcrtc_st->affected_pipes))
+		komeda_pipeline_update(master, old->state);
+
+	if (slave && has_bit(slave->id, kcrtc_st->affected_pipes))
+		komeda_pipeline_update(slave, old->state);
+
+	conn_st = wb_conn ? wb_conn->base.base.state : NULL;
+	if (conn_st && conn_st->writeback_job)
+		drm_writeback_queue_job(&wb_conn->base, conn_st);
+
+	/* step 2: notify the HW to kickoff the update */
+	mdev->funcs->flush(mdev, master->id, kcrtc_st->active_pipes);
+}
+
+static void
+komeda_crtc_atomic_enable(struct drm_crtc *crtc,
+			  struct drm_atomic_state *state)
+{
+	struct drm_crtc_state *old = drm_atomic_get_old_crtc_state(state,
+								   crtc);
+	pm_runtime_get_sync(crtc->dev->dev);
+	komeda_crtc_prepare(to_kcrtc(crtc));
+	drm_crtc_vblank_on(crtc);
+	WARN_ON(drm_crtc_vblank_get(crtc));
+	komeda_crtc_do_flush(crtc, old);
+}
+
+void
+komeda_crtc_flush_and_wait_for_flip_done(struct komeda_crtc *kcrtc,
+					 struct completion *input_flip_done)
+{
+	struct drm_device *drm = kcrtc->base.dev;
+	struct komeda_dev *mdev = kcrtc->master->mdev;
+	struct completion *flip_done;
+	struct completion temp;
+	int timeout;
+
+	/* if caller doesn't send a flip_done, use a private flip_done */
+	if (input_flip_done) {
+		flip_done = input_flip_done;
+	} else {
+		init_completion(&temp);
+		kcrtc->disable_done = &temp;
+		flip_done = &temp;
+	}
+
+	mdev->funcs->flush(mdev, kcrtc->master->id, 0);
+
+	/* wait the flip take affect.*/
+	timeout = wait_for_completion_timeout(flip_done, HZ);
+	if (timeout == 0) {
+		DRM_ERROR("wait pipe%d flip done timeout\n", kcrtc->master->id);
+		if (!input_flip_done) {
+			unsigned long flags;
+
+			spin_lock_irqsave(&drm->event_lock, flags);
+			kcrtc->disable_done = NULL;
+			spin_unlock_irqrestore(&drm->event_lock, flags);
+		}
+	}
+}
+
+static void
+komeda_crtc_atomic_disable(struct drm_crtc *crtc,
+			   struct drm_atomic_state *state)
+{
+	struct drm_crtc_state *old = drm_atomic_get_old_crtc_state(state,
+								   crtc);
+	struct komeda_crtc *kcrtc = to_kcrtc(crtc);
+	struct komeda_crtc_state *old_st = to_kcrtc_st(old);
+	struct komeda_pipeline *master = kcrtc->master;
+	struct komeda_pipeline *slave  = kcrtc->slave;
+	struct completion *disable_done;
+	bool needs_phase2 = false;
+
+	DRM_DEBUG_ATOMIC("CRTC%d_DISABLE: active_pipes: 0x%x, affected: 0x%x\n",
+			 drm_crtc_index(crtc),
+			 old_st->active_pipes, old_st->affected_pipes);
+
+	if (slave && has_bit(slave->id, old_st->active_pipes))
+		komeda_pipeline_disable(slave, old->state);
+
+	if (has_bit(master->id, old_st->active_pipes))
+		needs_phase2 = komeda_pipeline_disable(master, old->state);
+
+	/* crtc_disable has two scenarios according to the state->active switch.
+	 * 1. active -> inactive
+	 *    this commit is a disable commit. and the commit will be finished
+	 *    or done after the disable operation. on this case we can directly
+	 *    use the crtc->state->event to tracking the HW disable operation.
+	 * 2. active -> active
+	 *    the crtc->commit is not for disable, but a modeset operation when
+	 *    crtc is active, such commit actually has been completed by 3
+	 *    DRM operations:
+	 *    crtc_disable, update_planes(crtc_flush), crtc_enable
+	 *    so on this case the crtc->commit is for the whole process.
+	 *    we can not use it for tracing the disable, we need a temporary
+	 *    flip_done for tracing the disable. and crtc->state->event for
+	 *    the crtc_enable operation.
+	 *    That's also the reason why skip modeset commit in
+	 *    komeda_crtc_atomic_flush()
+	 */
+	disable_done = (needs_phase2 || crtc->state->active) ?
+		       NULL : &crtc->state->commit->flip_done;
+
+	/* wait phase 1 disable done */
+	komeda_crtc_flush_and_wait_for_flip_done(kcrtc, disable_done);
+
+	/* phase 2 */
+	if (needs_phase2) {
+		komeda_pipeline_disable(kcrtc->master, old->state);
+
+		disable_done = crtc->state->active ?
+			       NULL : &crtc->state->commit->flip_done;
+
+		komeda_crtc_flush_and_wait_for_flip_done(kcrtc, disable_done);
+	}
+
+	drm_crtc_vblank_put(crtc);
+	drm_crtc_vblank_off(crtc);
+	komeda_crtc_unprepare(kcrtc);
+	pm_runtime_put(crtc->dev->dev);
+}
+
+static void
+komeda_crtc_atomic_flush(struct drm_crtc *crtc,
+			 struct drm_atomic_state *state)
+{
+	struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state,
+									  crtc);
+	struct drm_crtc_state *old = drm_atomic_get_old_crtc_state(state,
+								   crtc);
+	/* commit with modeset will be handled in enable/disable */
+	if (drm_atomic_crtc_needs_modeset(crtc_state))
+		return;
+
+	komeda_crtc_do_flush(crtc, old);
+}
+
+/* Returns the minimum frequency of the aclk rate (main engine clock) in Hz */
+static unsigned long
+komeda_calc_min_aclk_rate(struct komeda_crtc *kcrtc,
+			  unsigned long pxlclk)
+{
+	/* Once dual-link one display pipeline drives two display outputs,
+	 * the aclk needs run on the double rate of pxlclk
+	 */
+	if (kcrtc->master->dual_link)
+		return pxlclk * 2;
+	else
+		return pxlclk;
+}
+
+/* Get current aclk rate that specified by state */
+unsigned long komeda_crtc_get_aclk(struct komeda_crtc_state *kcrtc_st)
+{
+	struct drm_crtc *crtc = kcrtc_st->base.crtc;
+	struct komeda_dev *mdev = crtc->dev->dev_private;
+	unsigned long pxlclk = kcrtc_st->base.adjusted_mode.crtc_clock * 1000;
+	unsigned long min_aclk;
+
+	min_aclk = komeda_calc_min_aclk_rate(to_kcrtc(crtc), pxlclk);
+
+	return clk_round_rate(mdev->aclk, min_aclk);
+}
+
+static enum drm_mode_status
+komeda_crtc_mode_valid(struct drm_crtc *crtc, const struct drm_display_mode *m)
+{
+	struct komeda_dev *mdev = crtc->dev->dev_private;
+	struct komeda_crtc *kcrtc = to_kcrtc(crtc);
+	struct komeda_pipeline *master = kcrtc->master;
+	unsigned long min_pxlclk, min_aclk;
+
+	if (m->flags & DRM_MODE_FLAG_INTERLACE)
+		return MODE_NO_INTERLACE;
+
+	min_pxlclk = m->clock * 1000;
+	if (master->dual_link)
+		min_pxlclk /= 2;
+
+	if (min_pxlclk != clk_round_rate(master->pxlclk, min_pxlclk)) {
+		DRM_DEBUG_ATOMIC("pxlclk doesn't support %lu Hz\n", min_pxlclk);
+
+		return MODE_NOCLOCK;
+	}
+
+	min_aclk = komeda_calc_min_aclk_rate(to_kcrtc(crtc), min_pxlclk);
+	if (clk_round_rate(mdev->aclk, min_aclk) < min_aclk) {
+		DRM_DEBUG_ATOMIC("engine clk can't satisfy the requirement of %s-clk: %lu.\n",
+				 m->name, min_pxlclk);
+
+		return MODE_CLOCK_HIGH;
+	}
+
+	return MODE_OK;
+}
+
+static bool komeda_crtc_mode_fixup(struct drm_crtc *crtc,
+				   const struct drm_display_mode *m,
+				   struct drm_display_mode *adjusted_mode)
+{
+	struct komeda_crtc *kcrtc = to_kcrtc(crtc);
+	unsigned long clk_rate;
+
+	drm_mode_set_crtcinfo(adjusted_mode, 0);
+	/* In dual link half the horizontal settings */
+	if (kcrtc->master->dual_link) {
+		adjusted_mode->crtc_clock /= 2;
+		adjusted_mode->crtc_hdisplay /= 2;
+		adjusted_mode->crtc_hsync_start /= 2;
+		adjusted_mode->crtc_hsync_end /= 2;
+		adjusted_mode->crtc_htotal /= 2;
+	}
+
+	clk_rate = adjusted_mode->crtc_clock * 1000;
+	/* crtc_clock will be used as the komeda output pixel clock */
+	adjusted_mode->crtc_clock = clk_round_rate(kcrtc->master->pxlclk,
+						   clk_rate) / 1000;
+
+	return true;
+}
+
+static const struct drm_crtc_helper_funcs komeda_crtc_helper_funcs = {
+	.atomic_check	= komeda_crtc_atomic_check,
+	.atomic_flush	= komeda_crtc_atomic_flush,
+	.atomic_enable	= komeda_crtc_atomic_enable,
+	.atomic_disable	= komeda_crtc_atomic_disable,
+	.mode_valid	= komeda_crtc_mode_valid,
+	.mode_fixup	= komeda_crtc_mode_fixup,
+};
+
+static void komeda_crtc_reset(struct drm_crtc *crtc)
+{
+	struct komeda_crtc_state *state;
+
+	if (crtc->state)
+		__drm_atomic_helper_crtc_destroy_state(crtc->state);
+
+	kfree(to_kcrtc_st(crtc->state));
+	crtc->state = NULL;
+
+	state = kzalloc(sizeof(*state), GFP_KERNEL);
+	if (state)
+		__drm_atomic_helper_crtc_reset(crtc, &state->base);
+}
+
+static struct drm_crtc_state *
+komeda_crtc_atomic_duplicate_state(struct drm_crtc *crtc)
+{
+	struct komeda_crtc_state *old = to_kcrtc_st(crtc->state);
+	struct komeda_crtc_state *new;
+
+	new = kzalloc(sizeof(*new), GFP_KERNEL);
+	if (!new)
+		return NULL;
+
+	__drm_atomic_helper_crtc_duplicate_state(crtc, &new->base);
+
+	new->affected_pipes = old->active_pipes;
+	new->clock_ratio = old->clock_ratio;
+	new->max_slave_zorder = old->max_slave_zorder;
+
+	return &new->base;
+}
+
+static void komeda_crtc_atomic_destroy_state(struct drm_crtc *crtc,
+					     struct drm_crtc_state *state)
+{
+	__drm_atomic_helper_crtc_destroy_state(state);
+	kfree(to_kcrtc_st(state));
+}
+
+static int komeda_crtc_vblank_enable(struct drm_crtc *crtc)
+{
+	struct komeda_dev *mdev = crtc->dev->dev_private;
+	struct komeda_crtc *kcrtc = to_kcrtc(crtc);
+
+	mdev->funcs->on_off_vblank(mdev, kcrtc->master->id, true);
+	return 0;
+}
+
+static void komeda_crtc_vblank_disable(struct drm_crtc *crtc)
+{
+	struct komeda_dev *mdev = crtc->dev->dev_private;
+	struct komeda_crtc *kcrtc = to_kcrtc(crtc);
+
+	mdev->funcs->on_off_vblank(mdev, kcrtc->master->id, false);
+}
+
+static const struct drm_crtc_funcs komeda_crtc_funcs = {
+	.destroy		= drm_crtc_cleanup,
+	.set_config		= drm_atomic_helper_set_config,
+	.page_flip		= drm_atomic_helper_page_flip,
+	.reset			= komeda_crtc_reset,
+	.atomic_duplicate_state	= komeda_crtc_atomic_duplicate_state,
+	.atomic_destroy_state	= komeda_crtc_atomic_destroy_state,
+	.enable_vblank		= komeda_crtc_vblank_enable,
+	.disable_vblank		= komeda_crtc_vblank_disable,
+};
+
+int komeda_kms_setup_crtcs(struct komeda_kms_dev *kms,
+			   struct komeda_dev *mdev)
+{
+	struct komeda_crtc *crtc;
+	struct komeda_pipeline *master;
+	char str[16];
+	int i;
+
+	kms->n_crtcs = 0;
+
+	for (i = 0; i < mdev->n_pipelines; i++) {
+		crtc = &kms->crtcs[kms->n_crtcs];
+		master = mdev->pipelines[i];
+
+		crtc->master = master;
+		crtc->slave  = komeda_pipeline_get_slave(master);
+
+		if (crtc->slave)
+			sprintf(str, "pipe-%d", crtc->slave->id);
+		else
+			sprintf(str, "None");
+
+		DRM_INFO("CRTC-%d: master(pipe-%d) slave(%s).\n",
+			 kms->n_crtcs, master->id, str);
+
+		kms->n_crtcs++;
+	}
+
+	return 0;
+}
+
+static struct drm_plane *
+get_crtc_primary(struct komeda_kms_dev *kms, struct komeda_crtc *crtc)
+{
+	struct komeda_plane *kplane;
+	struct drm_plane *plane;
+
+	drm_for_each_plane(plane, &kms->base) {
+		if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+			continue;
+
+		kplane = to_kplane(plane);
+		/* only master can be primary */
+		if (kplane->layer->base.pipeline == crtc->master)
+			return plane;
+	}
+
+	return NULL;
+}
+
+static int komeda_crtc_add(struct komeda_kms_dev *kms,
+			   struct komeda_crtc *kcrtc)
+{
+	struct drm_crtc *crtc = &kcrtc->base;
+	int err;
+
+	err = drm_crtc_init_with_planes(&kms->base, crtc,
+					get_crtc_primary(kms, kcrtc), NULL,
+					&komeda_crtc_funcs, NULL);
+	if (err)
+		return err;
+
+	drm_crtc_helper_add(crtc, &komeda_crtc_helper_funcs);
+
+	crtc->port = kcrtc->master->of_output_port;
+
+	drm_crtc_enable_color_mgmt(crtc, 0, true, KOMEDA_COLOR_LUT_SIZE);
+
+	return err;
+}
+
+int komeda_kms_add_crtcs(struct komeda_kms_dev *kms, struct komeda_dev *mdev)
+{
+	int i, err;
+
+	for (i = 0; i < kms->n_crtcs; i++) {
+		err = komeda_crtc_add(kms, &kms->crtcs[i]);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}