Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 416 insertions, 0 deletions

diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
new file mode 100644
index 000000000..5b5c774e0
--- /dev/null
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
@@ -0,0 +1,416 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2014 Traphandler
+ * Copyright (C) 2014 Free Electrons
+ * Copyright (C) 2014 Atmel
+ *
+ * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ */
+
+#ifndef DRM_ATMEL_HLCDC_H
+#define DRM_ATMEL_HLCDC_H
+
+#include <linux/regmap.h>
+
+#include <drm/drm_plane.h>
+
+#define ATMEL_HLCDC_LAYER_CHER			0x0
+#define ATMEL_HLCDC_LAYER_CHDR			0x4
+#define ATMEL_HLCDC_LAYER_CHSR			0x8
+#define ATMEL_HLCDC_LAYER_EN			BIT(0)
+#define ATMEL_HLCDC_LAYER_UPDATE		BIT(1)
+#define ATMEL_HLCDC_LAYER_A2Q			BIT(2)
+#define ATMEL_HLCDC_LAYER_RST			BIT(8)
+
+#define ATMEL_HLCDC_LAYER_IER			0xc
+#define ATMEL_HLCDC_LAYER_IDR			0x10
+#define ATMEL_HLCDC_LAYER_IMR			0x14
+#define ATMEL_HLCDC_LAYER_ISR			0x18
+#define ATMEL_HLCDC_LAYER_DFETCH		BIT(0)
+#define ATMEL_HLCDC_LAYER_LFETCH		BIT(1)
+#define ATMEL_HLCDC_LAYER_DMA_IRQ(p)		BIT(2 + (8 * (p)))
+#define ATMEL_HLCDC_LAYER_DSCR_IRQ(p)		BIT(3 + (8 * (p)))
+#define ATMEL_HLCDC_LAYER_ADD_IRQ(p)		BIT(4 + (8 * (p)))
+#define ATMEL_HLCDC_LAYER_DONE_IRQ(p)		BIT(5 + (8 * (p)))
+#define ATMEL_HLCDC_LAYER_OVR_IRQ(p)		BIT(6 + (8 * (p)))
+
+#define ATMEL_HLCDC_LAYER_PLANE_HEAD(p)		(((p) * 0x10) + 0x1c)
+#define ATMEL_HLCDC_LAYER_PLANE_ADDR(p)		(((p) * 0x10) + 0x20)
+#define ATMEL_HLCDC_LAYER_PLANE_CTRL(p)		(((p) * 0x10) + 0x24)
+#define ATMEL_HLCDC_LAYER_PLANE_NEXT(p)		(((p) * 0x10) + 0x28)
+
+#define ATMEL_HLCDC_LAYER_DMA_CFG		0
+#define ATMEL_HLCDC_LAYER_DMA_SIF		BIT(0)
+#define ATMEL_HLCDC_LAYER_DMA_BLEN_MASK		GENMASK(5, 4)
+#define ATMEL_HLCDC_LAYER_DMA_BLEN_SINGLE	(0 << 4)
+#define ATMEL_HLCDC_LAYER_DMA_BLEN_INCR4	(1 << 4)
+#define ATMEL_HLCDC_LAYER_DMA_BLEN_INCR8	(2 << 4)
+#define ATMEL_HLCDC_LAYER_DMA_BLEN_INCR16	(3 << 4)
+#define ATMEL_HLCDC_LAYER_DMA_DLBO		BIT(8)
+#define ATMEL_HLCDC_LAYER_DMA_ROTDIS		BIT(12)
+#define ATMEL_HLCDC_LAYER_DMA_LOCKDIS		BIT(13)
+
+#define ATMEL_HLCDC_LAYER_FORMAT_CFG		1
+#define ATMEL_HLCDC_LAYER_RGB			(0 << 0)
+#define ATMEL_HLCDC_LAYER_CLUT			(1 << 0)
+#define ATMEL_HLCDC_LAYER_YUV			(2 << 0)
+#define ATMEL_HLCDC_RGB_MODE(m)			\
+	(ATMEL_HLCDC_LAYER_RGB | (((m) & 0xf) << 4))
+#define ATMEL_HLCDC_CLUT_MODE(m)		\
+	(ATMEL_HLCDC_LAYER_CLUT | (((m) & 0x3) << 8))
+#define ATMEL_HLCDC_YUV_MODE(m)			\
+	(ATMEL_HLCDC_LAYER_YUV | (((m) & 0xf) << 12))
+#define ATMEL_HLCDC_YUV422ROT			BIT(16)
+#define ATMEL_HLCDC_YUV422SWP			BIT(17)
+#define ATMEL_HLCDC_DSCALEOPT			BIT(20)
+
+#define ATMEL_HLCDC_C1_MODE			ATMEL_HLCDC_CLUT_MODE(0)
+#define ATMEL_HLCDC_C2_MODE			ATMEL_HLCDC_CLUT_MODE(1)
+#define ATMEL_HLCDC_C4_MODE			ATMEL_HLCDC_CLUT_MODE(2)
+#define ATMEL_HLCDC_C8_MODE			ATMEL_HLCDC_CLUT_MODE(3)
+
+#define ATMEL_HLCDC_XRGB4444_MODE		ATMEL_HLCDC_RGB_MODE(0)
+#define ATMEL_HLCDC_ARGB4444_MODE		ATMEL_HLCDC_RGB_MODE(1)
+#define ATMEL_HLCDC_RGBA4444_MODE		ATMEL_HLCDC_RGB_MODE(2)
+#define ATMEL_HLCDC_RGB565_MODE			ATMEL_HLCDC_RGB_MODE(3)
+#define ATMEL_HLCDC_ARGB1555_MODE		ATMEL_HLCDC_RGB_MODE(4)
+#define ATMEL_HLCDC_XRGB8888_MODE		ATMEL_HLCDC_RGB_MODE(9)
+#define ATMEL_HLCDC_RGB888_MODE			ATMEL_HLCDC_RGB_MODE(10)
+#define ATMEL_HLCDC_ARGB8888_MODE		ATMEL_HLCDC_RGB_MODE(12)
+#define ATMEL_HLCDC_RGBA8888_MODE		ATMEL_HLCDC_RGB_MODE(13)
+
+#define ATMEL_HLCDC_AYUV_MODE			ATMEL_HLCDC_YUV_MODE(0)
+#define ATMEL_HLCDC_YUYV_MODE			ATMEL_HLCDC_YUV_MODE(1)
+#define ATMEL_HLCDC_UYVY_MODE			ATMEL_HLCDC_YUV_MODE(2)
+#define ATMEL_HLCDC_YVYU_MODE			ATMEL_HLCDC_YUV_MODE(3)
+#define ATMEL_HLCDC_VYUY_MODE			ATMEL_HLCDC_YUV_MODE(4)
+#define ATMEL_HLCDC_NV61_MODE			ATMEL_HLCDC_YUV_MODE(5)
+#define ATMEL_HLCDC_YUV422_MODE			ATMEL_HLCDC_YUV_MODE(6)
+#define ATMEL_HLCDC_NV21_MODE			ATMEL_HLCDC_YUV_MODE(7)
+#define ATMEL_HLCDC_YUV420_MODE			ATMEL_HLCDC_YUV_MODE(8)
+
+#define ATMEL_HLCDC_LAYER_POS(x, y)		((x) | ((y) << 16))
+#define ATMEL_HLCDC_LAYER_SIZE(w, h)		(((w) - 1) | (((h) - 1) << 16))
+
+#define ATMEL_HLCDC_LAYER_CRKEY			BIT(0)
+#define ATMEL_HLCDC_LAYER_INV			BIT(1)
+#define ATMEL_HLCDC_LAYER_ITER2BL		BIT(2)
+#define ATMEL_HLCDC_LAYER_ITER			BIT(3)
+#define ATMEL_HLCDC_LAYER_REVALPHA		BIT(4)
+#define ATMEL_HLCDC_LAYER_GAEN			BIT(5)
+#define ATMEL_HLCDC_LAYER_LAEN			BIT(6)
+#define ATMEL_HLCDC_LAYER_OVR			BIT(7)
+#define ATMEL_HLCDC_LAYER_DMA			BIT(8)
+#define ATMEL_HLCDC_LAYER_REP			BIT(9)
+#define ATMEL_HLCDC_LAYER_DSTKEY		BIT(10)
+#define ATMEL_HLCDC_LAYER_DISCEN		BIT(11)
+#define ATMEL_HLCDC_LAYER_GA_SHIFT		16
+#define ATMEL_HLCDC_LAYER_GA_MASK		\
+	GENMASK(23, ATMEL_HLCDC_LAYER_GA_SHIFT)
+#define ATMEL_HLCDC_LAYER_GA(x)			\
+	((x) << ATMEL_HLCDC_LAYER_GA_SHIFT)
+
+#define ATMEL_HLCDC_LAYER_DISC_POS(x, y)	((x) | ((y) << 16))
+#define ATMEL_HLCDC_LAYER_DISC_SIZE(w, h)	(((w) - 1) | (((h) - 1) << 16))
+
+#define ATMEL_HLCDC_LAYER_SCALER_FACTORS(x, y)	((x) | ((y) << 16))
+#define ATMEL_HLCDC_LAYER_SCALER_ENABLE		BIT(31)
+
+#define ATMEL_HLCDC_LAYER_MAX_PLANES		3
+
+#define ATMEL_HLCDC_DMA_CHANNEL_DSCR_RESERVED	BIT(0)
+#define ATMEL_HLCDC_DMA_CHANNEL_DSCR_LOADED	BIT(1)
+#define ATMEL_HLCDC_DMA_CHANNEL_DSCR_DONE	BIT(2)
+#define ATMEL_HLCDC_DMA_CHANNEL_DSCR_OVERRUN	BIT(3)
+
+#define ATMEL_HLCDC_CLUT_SIZE			256
+
+#define ATMEL_HLCDC_MAX_LAYERS			6
+
+/**
+ * Atmel HLCDC Layer registers layout structure
+ *
+ * Each HLCDC layer has its own register organization and a given register
+ * can be placed differently on 2 different layers depending on its
+ * capabilities.
+ * This structure stores common registers layout for a given layer and is
+ * used by HLCDC layer code to choose the appropriate register to write to
+ * or to read from.
+ *
+ * For all fields, a value of zero means "unsupported".
+ *
+ * See Atmel's datasheet for a detailled description of these registers.
+ *
+ * @xstride: xstride registers
+ * @pstride: pstride registers
+ * @pos: position register
+ * @size: displayed size register
+ * @memsize: memory size register
+ * @default_color: default color register
+ * @chroma_key: chroma key register
+ * @chroma_key_mask: chroma key mask register
+ * @general_config: general layer config register
+ * @sacler_config: scaler factors register
+ * @phicoeffs: X/Y PHI coefficient registers
+ * @disc_pos: discard area position register
+ * @disc_size: discard area size register
+ * @csc: color space conversion register
+ */
+struct atmel_hlcdc_layer_cfg_layout {
+	int xstride[ATMEL_HLCDC_LAYER_MAX_PLANES];
+	int pstride[ATMEL_HLCDC_LAYER_MAX_PLANES];
+	int pos;
+	int size;
+	int memsize;
+	int default_color;
+	int chroma_key;
+	int chroma_key_mask;
+	int general_config;
+	int scaler_config;
+	struct {
+		int x;
+		int y;
+	} phicoeffs;
+	int disc_pos;
+	int disc_size;
+	int csc;
+};
+
+/**
+ * Atmel HLCDC DMA descriptor structure
+ *
+ * This structure is used by the HLCDC DMA engine to schedule a DMA transfer.
+ *
+ * The structure fields must remain in this specific order, because they're
+ * used by the HLCDC DMA engine, which expect them in this order.
+ * HLCDC DMA descriptors must be aligned on 64 bits.
+ *
+ * @addr: buffer DMA address
+ * @ctrl: DMA transfer options
+ * @next: next DMA descriptor to fetch
+ * @self: descriptor DMA address
+ */
+struct atmel_hlcdc_dma_channel_dscr {
+	dma_addr_t addr;
+	u32 ctrl;
+	dma_addr_t next;
+	dma_addr_t self;
+} __aligned(sizeof(u64));
+
+/**
+ * Atmel HLCDC layer types
+ */
+enum atmel_hlcdc_layer_type {
+	ATMEL_HLCDC_NO_LAYER,
+	ATMEL_HLCDC_BASE_LAYER,
+	ATMEL_HLCDC_OVERLAY_LAYER,
+	ATMEL_HLCDC_CURSOR_LAYER,
+	ATMEL_HLCDC_PP_LAYER,
+};
+
+/**
+ * Atmel HLCDC Supported formats structure
+ *
+ * This structure list all the formats supported by a given layer.
+ *
+ * @nformats: number of supported formats
+ * @formats: supported formats
+ */
+struct atmel_hlcdc_formats {
+	int nformats;
+	u32 *formats;
+};
+
+/**
+ * Atmel HLCDC Layer description structure
+ *
+ * This structure describes the capabilities provided by a given layer.
+ *
+ * @name: layer name
+ * @type: layer type
+ * @id: layer id
+ * @regs_offset: offset of the layer registers from the HLCDC registers base
+ * @cfgs_offset: CFGX registers offset from the layer registers base
+ * @formats: supported formats
+ * @layout: config registers layout
+ * @max_width: maximum width supported by this layer (0 means unlimited)
+ * @max_height: maximum height supported by this layer (0 means unlimited)
+ */
+struct atmel_hlcdc_layer_desc {
+	const char *name;
+	enum atmel_hlcdc_layer_type type;
+	int id;
+	int regs_offset;
+	int cfgs_offset;
+	int clut_offset;
+	struct atmel_hlcdc_formats *formats;
+	struct atmel_hlcdc_layer_cfg_layout layout;
+	int max_width;
+	int max_height;
+};
+
+/**
+ * Atmel HLCDC Layer.
+ *
+ * A layer can be a DRM plane of a post processing layer used to render
+ * HLCDC composition into memory.
+ *
+ * @desc: layer description
+ * @regmap: pointer to the HLCDC regmap
+ */
+struct atmel_hlcdc_layer {
+	const struct atmel_hlcdc_layer_desc *desc;
+	struct regmap *regmap;
+};
+
+/**
+ * Atmel HLCDC Plane.
+ *
+ * @base: base DRM plane structure
+ * @layer: HLCDC layer structure
+ * @properties: pointer to the property definitions structure
+ */
+struct atmel_hlcdc_plane {
+	struct drm_plane base;
+	struct atmel_hlcdc_layer layer;
+};
+
+static inline struct atmel_hlcdc_plane *
+drm_plane_to_atmel_hlcdc_plane(struct drm_plane *p)
+{
+	return container_of(p, struct atmel_hlcdc_plane, base);
+}
+
+static inline struct atmel_hlcdc_plane *
+atmel_hlcdc_layer_to_plane(struct atmel_hlcdc_layer *layer)
+{
+	return container_of(layer, struct atmel_hlcdc_plane, layer);
+}
+
+/**
+ * Atmel HLCDC Display Controller description structure.
+ *
+ * This structure describes the HLCDC IP capabilities and depends on the
+ * HLCDC IP version (or Atmel SoC family).
+ *
+ * @min_width: minimum width supported by the Display Controller
+ * @min_height: minimum height supported by the Display Controller
+ * @max_width: maximum width supported by the Display Controller
+ * @max_height: maximum height supported by the Display Controller
+ * @max_spw: maximum vertical/horizontal pulse width
+ * @max_vpw: maximum vertical back/front porch width
+ * @max_hpw: maximum horizontal back/front porch width
+ * @conflicting_output_formats: true if RGBXXX output formats conflict with
+ *				each other.
+ * @fixed_clksrc: true if clock source is fixed
+ * @layers: a layer description table describing available layers
+ * @nlayers: layer description table size
+ */
+struct atmel_hlcdc_dc_desc {
+	int min_width;
+	int min_height;
+	int max_width;
+	int max_height;
+	int max_spw;
+	int max_vpw;
+	int max_hpw;
+	bool conflicting_output_formats;
+	bool fixed_clksrc;
+	const struct atmel_hlcdc_layer_desc *layers;
+	int nlayers;
+};
+
+/**
+ * Atmel HLCDC Display Controller.
+ *
+ * @desc: HLCDC Display Controller description
+ * @dscrpool: DMA coherent pool used to allocate DMA descriptors
+ * @hlcdc: pointer to the atmel_hlcdc structure provided by the MFD device
+ * @fbdev: framebuffer device attached to the Display Controller
+ * @crtc: CRTC provided by the display controller
+ * @planes: instantiated planes
+ * @layers: active HLCDC layers
+ * @suspend: used to store the HLCDC state when entering suspend
+ */
+struct atmel_hlcdc_dc {
+	const struct atmel_hlcdc_dc_desc *desc;
+	struct dma_pool *dscrpool;
+	struct atmel_hlcdc *hlcdc;
+	struct drm_crtc *crtc;
+	struct atmel_hlcdc_layer *layers[ATMEL_HLCDC_MAX_LAYERS];
+	struct {
+		u32 imr;
+		struct drm_atomic_state *state;
+	} suspend;
+};
+
+extern struct atmel_hlcdc_formats atmel_hlcdc_plane_rgb_formats;
+extern struct atmel_hlcdc_formats atmel_hlcdc_plane_rgb_and_yuv_formats;
+
+static inline void atmel_hlcdc_layer_write_reg(struct atmel_hlcdc_layer *layer,
+					       unsigned int reg, u32 val)
+{
+	regmap_write(layer->regmap, layer->desc->regs_offset + reg, val);
+}
+
+static inline u32 atmel_hlcdc_layer_read_reg(struct atmel_hlcdc_layer *layer,
+					     unsigned int reg)
+{
+	u32 val;
+
+	regmap_read(layer->regmap, layer->desc->regs_offset + reg, &val);
+
+	return val;
+}
+
+static inline void atmel_hlcdc_layer_write_cfg(struct atmel_hlcdc_layer *layer,
+					       unsigned int cfgid, u32 val)
+{
+	atmel_hlcdc_layer_write_reg(layer,
+				    layer->desc->cfgs_offset +
+				    (cfgid * sizeof(u32)), val);
+}
+
+static inline u32 atmel_hlcdc_layer_read_cfg(struct atmel_hlcdc_layer *layer,
+					     unsigned int cfgid)
+{
+	return atmel_hlcdc_layer_read_reg(layer,
+					  layer->desc->cfgs_offset +
+					  (cfgid * sizeof(u32)));
+}
+
+static inline void atmel_hlcdc_layer_write_clut(struct atmel_hlcdc_layer *layer,
+						unsigned int c, u32 val)
+{
+	regmap_write(layer->regmap,
+		     layer->desc->clut_offset + c * sizeof(u32),
+		     val);
+}
+
+static inline void atmel_hlcdc_layer_init(struct atmel_hlcdc_layer *layer,
+				const struct atmel_hlcdc_layer_desc *desc,
+				struct regmap *regmap)
+{
+	layer->desc = desc;
+	layer->regmap = regmap;
+}
+
+enum drm_mode_status
+atmel_hlcdc_dc_mode_valid(struct atmel_hlcdc_dc *dc,
+			  const struct drm_display_mode *mode);
+
+int atmel_hlcdc_create_planes(struct drm_device *dev);
+void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane);
+
+int atmel_hlcdc_plane_prepare_disc_area(struct drm_crtc_state *c_state);
+int atmel_hlcdc_plane_prepare_ahb_routing(struct drm_crtc_state *c_state);
+
+void atmel_hlcdc_crtc_irq(struct drm_crtc *c);
+
+int atmel_hlcdc_crtc_create(struct drm_device *dev);
+
+int atmel_hlcdc_create_outputs(struct drm_device *dev);
+int atmel_hlcdc_encoder_get_bus_fmt(struct drm_encoder *encoder);
+
+#endif /* DRM_ATMEL_HLCDC_H */