Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 392 insertions, 0 deletions

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
new file mode 100644
index 000000000..57946d80b
--- /dev/null
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -0,0 +1,392 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config DRM_BRIDGE
+	def_bool y
+	depends on DRM
+	help
+	  Bridge registration and lookup framework.
+
+config DRM_PANEL_BRIDGE
+	def_bool y
+	depends on DRM_BRIDGE
+	select DRM_PANEL
+	help
+	  DRM bridge wrapper of DRM panels
+
+menu "Display Interface Bridges"
+	depends on DRM && DRM_BRIDGE
+
+config DRM_CDNS_DSI
+	tristate "Cadence DPI/DSI bridge"
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select DRM_PANEL_BRIDGE
+	select GENERIC_PHY_MIPI_DPHY
+	depends on OF
+	help
+	  Support Cadence DPI to DSI bridge. This is an internal
+	  bridge and is meant to be directly embedded in a SoC.
+
+config DRM_CHIPONE_ICN6211
+	tristate "Chipone ICN6211 MIPI-DSI/RGB Converter bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select DRM_PANEL_BRIDGE
+	select REGMAP_I2C
+	help
+	  ICN6211 is MIPI-DSI/RGB Converter bridge from chipone.
+
+	  It has a flexible configuration of MIPI DSI signal input
+	  and produce RGB565, RGB666, RGB888 output format.
+
+	  If in doubt, say "N".
+
+config DRM_CHRONTEL_CH7033
+	tristate "Chrontel CH7033 Video Encoder"
+	depends on OF
+	select DRM_KMS_HELPER
+	help
+	  Enable support for the Chrontel CH7033 VGA/DVI/HDMI Encoder, as
+	  found in the Dell Wyse 3020 thin client.
+
+	  If in doubt, say "N".
+
+config DRM_CROS_EC_ANX7688
+	tristate "ChromeOS EC ANX7688 bridge"
+	depends on OF
+	depends on I2C_CROS_EC_TUNNEL || COMPILE_TEST
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	help
+	  ChromeOS EC ANX7688 is an ultra-low power
+	  4K Ultra-HD (4096x2160p60) mobile HD transmitter
+	  designed for ChromeOS devices. It converts HDMI
+	  2.0 to DisplayPort 1.3 Ultra-HD. It is connected
+	  to the ChromeOS Embedded Controller.
+
+config DRM_DISPLAY_CONNECTOR
+	tristate "Display connector support"
+	depends on OF
+	help
+	  Driver for display connectors with support for DDC and hot-plug
+	  detection. Most display controllers handle display connectors
+	  internally and don't need this driver, but the DRM subsystem is
+	  moving towards separating connector handling from display controllers
+	  on ARM-based platforms. Saying Y here when this driver is not needed
+	  will not cause any issue.
+
+config DRM_FSL_LDB
+	tristate "Freescale i.MX8MP LDB bridge"
+	depends on OF
+	depends on ARCH_MXC || COMPILE_TEST
+	select DRM_KMS_HELPER
+	select DRM_PANEL_BRIDGE
+	help
+	  Support for i.MX8MP DPI-to-LVDS on-SoC encoder.
+
+config DRM_ITE_IT6505
+        tristate "ITE IT6505 DisplayPort bridge"
+        depends on OF
+	select DRM_DISPLAY_DP_HELPER
+	select DRM_DISPLAY_HDCP_HELPER
+	select DRM_DISPLAY_HELPER
+        select DRM_DP_AUX_BUS
+        select DRM_KMS_HELPER
+        select DRM_DP_HELPER
+        select EXTCON
+        select CRYPTO
+        select CRYPTO_HASH
+        help
+          ITE IT6505 DisplayPort bridge chip driver.
+
+config DRM_LONTIUM_LT8912B
+	tristate "Lontium LT8912B DSI/HDMI bridge"
+	depends on OF
+	select DRM_PANEL_BRIDGE
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select REGMAP_I2C
+	select VIDEOMODE_HELPERS
+	help
+	  Driver for Lontium LT8912B DSI to HDMI bridge
+	  chip driver.
+	  Please say Y if you have such hardware.
+
+	  Say M here if you want to support this hardware as a module.
+	  The module will be named "lontium-lt8912b".
+
+config DRM_LONTIUM_LT9211
+	tristate "Lontium LT9211 DSI/LVDS/DPI bridge"
+	depends on OF
+	select DRM_PANEL_BRIDGE
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select REGMAP_I2C
+	help
+	  Driver for Lontium LT9211 Single/Dual-Link DSI/LVDS or Single DPI
+	  input to Single-link/Dual-Link DSI/LVDS or Single DPI output bridge
+	  chip.
+	  Please say Y if you have such hardware.
+
+config DRM_LONTIUM_LT9611
+	tristate "Lontium LT9611 DSI/HDMI bridge"
+	select SND_SOC_HDMI_CODEC if SND_SOC
+	depends on OF
+	select DRM_PANEL_BRIDGE
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select REGMAP_I2C
+	help
+	  Driver for Lontium LT9611 DSI to HDMI bridge
+	  chip driver that converts dual DSI and I2S to
+	  HDMI signals
+	  Please say Y if you have such hardware.
+
+config DRM_LONTIUM_LT9611UXC
+	tristate "Lontium LT9611UXC DSI/HDMI bridge"
+	select SND_SOC_HDMI_CODEC if SND_SOC
+	depends on OF
+	select DRM_PANEL_BRIDGE
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select REGMAP_I2C
+	help
+	  Driver for Lontium LT9611UXC DSI to HDMI bridge
+	  chip driver that converts dual DSI and I2S to
+	  HDMI signals
+	  Please say Y if you have such hardware.
+
+config DRM_ITE_IT66121
+	tristate "ITE IT66121 HDMI bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	help
+	  Support for ITE IT66121 HDMI bridge.
+
+config DRM_LVDS_CODEC
+	tristate "Transparent LVDS encoders and decoders support"
+	depends on OF
+	select DRM_KMS_HELPER
+	select DRM_PANEL_BRIDGE
+	help
+	  Support for transparent LVDS encoders and decoders that don't
+	  require any configuration.
+
+config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW
+	tristate "MegaChips stdp4028-ge-b850v3-fw and stdp2690-ge-b850v3-fw"
+	depends on OF
+	select DRM_KMS_HELPER
+	select DRM_PANEL
+	help
+	  This is a driver for the display bridges of
+	  GE B850v3 that convert dual channel LVDS
+	  to DP++. This is used with the i.MX6 imx-ldb
+	  driver. You are likely to say N here.
+
+config DRM_NWL_MIPI_DSI
+	tristate "Northwest Logic MIPI DSI Host controller"
+	depends on DRM
+	depends on COMMON_CLK
+	depends on OF && HAS_IOMEM
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select DRM_PANEL_BRIDGE
+	select GENERIC_PHY_MIPI_DPHY
+	select MFD_SYSCON
+	select MULTIPLEXER
+	select REGMAP_MMIO
+	help
+	  This enables the Northwest Logic MIPI DSI Host controller as
+	  for example found on NXP's i.MX8 Processors.
+
+config DRM_NXP_PTN3460
+	tristate "NXP PTN3460 DP/LVDS bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select DRM_PANEL
+	help
+	  NXP PTN3460 eDP-LVDS bridge chip driver.
+
+config DRM_PARADE_PS8622
+	tristate "Parade eDP/LVDS bridge"
+	depends on OF
+	select DRM_PANEL
+	select DRM_KMS_HELPER
+	select BACKLIGHT_CLASS_DEVICE
+	help
+	  Parade eDP-LVDS bridge chip driver.
+
+config DRM_PARADE_PS8640
+	tristate "Parade PS8640 MIPI DSI to eDP Converter"
+	depends on OF
+	select DRM_DISPLAY_DP_HELPER
+	select DRM_DISPLAY_HELPER
+	select DRM_DP_AUX_BUS
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select DRM_PANEL
+	help
+	  Choose this option if you have PS8640 for display
+	  The PS8640 is a high-performance and low-power
+	  MIPI DSI to eDP converter
+
+config DRM_SIL_SII8620
+	tristate "Silicon Image SII8620 HDMI/MHL bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select EXTCON
+	depends on RC_CORE || !RC_CORE
+	help
+	  Silicon Image SII8620 HDMI/MHL bridge chip driver.
+
+config DRM_SII902X
+	tristate "Silicon Image sii902x RGB/HDMI bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	select I2C_MUX
+	select SND_SOC_HDMI_CODEC if SND_SOC
+	help
+	  Silicon Image sii902x bridge chip driver.
+
+config DRM_SII9234
+	tristate "Silicon Image SII9234 HDMI/MHL bridge"
+	depends on OF
+	help
+	  Say Y here if you want support for the MHL interface.
+	  It is an I2C driver, that detects connection of MHL bridge
+	  and starts encapsulation of HDMI signal.
+
+config DRM_SIMPLE_BRIDGE
+	tristate "Simple DRM bridge support"
+	depends on OF
+	select DRM_KMS_HELPER
+	help
+	  Support for non-programmable DRM bridges, such as ADI ADV7123, TI
+	  THS8134 and THS8135 or passive resistor ladder DACs.
+
+config DRM_THINE_THC63LVD1024
+	tristate "Thine THC63LVD1024 LVDS decoder bridge"
+	depends on OF
+	help
+	  Thine THC63LVD1024 LVDS/parallel converter driver.
+
+config DRM_TOSHIBA_TC358762
+	tristate "TC358762 DSI/DPI bridge"
+	depends on OF
+	select DRM_MIPI_DSI
+	select DRM_KMS_HELPER
+	select DRM_PANEL_BRIDGE
+	help
+	  Toshiba TC358762 DSI/DPI bridge driver.
+
+config DRM_TOSHIBA_TC358764
+	tristate "TC358764 DSI/LVDS bridge"
+	depends on OF
+	select DRM_MIPI_DSI
+	select DRM_KMS_HELPER
+	select DRM_PANEL
+	help
+	  Toshiba TC358764 DSI/LVDS bridge driver.
+
+config DRM_TOSHIBA_TC358767
+	tristate "Toshiba TC358767 eDP bridge"
+	depends on OF
+	select DRM_DISPLAY_DP_HELPER
+	select DRM_DISPLAY_HELPER
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	select DRM_MIPI_DSI
+	select DRM_PANEL
+	help
+	  Toshiba TC358767 eDP bridge chip driver.
+
+config DRM_TOSHIBA_TC358768
+	tristate "Toshiba TC358768 MIPI DSI bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	select DRM_PANEL
+	select DRM_MIPI_DSI
+	help
+	  Toshiba TC358768AXBG/TC358778XBG DSI bridge chip driver.
+
+config DRM_TOSHIBA_TC358775
+	tristate "Toshiba TC358775 DSI/LVDS bridge"
+	depends on OF
+	select DRM_DISPLAY_DP_HELPER
+	select DRM_DISPLAY_HELPER
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	select DRM_PANEL
+	select DRM_MIPI_DSI
+	help
+	  Toshiba TC358775 DSI/LVDS bridge chip driver.
+
+config DRM_TI_DLPC3433
+	tristate "TI DLPC3433 Display controller"
+	depends on DRM && DRM_PANEL
+	depends on OF
+	select DRM_MIPI_DSI
+	help
+	  TI DLPC3433 is a MIPI DSI based display controller bridge
+	  for processing high resolution DMD based projectors.
+
+	  It has a flexible configuration of MIPI DSI and DPI signal
+	  input that produces a DMD output in RGB565, RGB666, RGB888
+	  formats.
+
+	  It supports upto 720p resolution with 60 and 120 Hz refresh
+	  rates.
+
+config DRM_TI_TFP410
+	tristate "TI TFP410 DVI/HDMI bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	help
+	  Texas Instruments TFP410 DVI/HDMI Transmitter driver
+
+config DRM_TI_SN65DSI83
+	tristate "TI SN65DSI83 and SN65DSI84 DSI to LVDS bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	select DRM_PANEL
+	select DRM_MIPI_DSI
+	help
+	  Texas Instruments SN65DSI83 and SN65DSI84 DSI to LVDS Bridge driver
+
+config DRM_TI_SN65DSI86
+	tristate "TI SN65DSI86 DSI to eDP bridge"
+	depends on OF
+	select DRM_DISPLAY_DP_HELPER
+	select DRM_DISPLAY_HELPER
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	select DRM_PANEL
+	select DRM_MIPI_DSI
+	select AUXILIARY_BUS
+	select DRM_DP_AUX_BUS
+	help
+	  Texas Instruments SN65DSI86 DSI to eDP Bridge driver
+
+config DRM_TI_TPD12S015
+	tristate "TI TPD12S015 HDMI level shifter and ESD protection"
+	depends on OF
+	select DRM_KMS_HELPER
+	help
+	  Texas Instruments TPD12S015 HDMI level shifter and ESD protection
+	  driver.
+
+source "drivers/gpu/drm/bridge/analogix/Kconfig"
+
+source "drivers/gpu/drm/bridge/adv7511/Kconfig"
+
+source "drivers/gpu/drm/bridge/cadence/Kconfig"
+
+source "drivers/gpu/drm/bridge/imx/Kconfig"
+
+source "drivers/gpu/drm/bridge/synopsys/Kconfig"
+
+endmenu