Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 425 insertions, 0 deletions

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
new file mode 100644
index 000000000..174458002
--- /dev/null
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
@@ -0,0 +1,425 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Analog Devices ADV7511 HDMI transmitter driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ */
+
+#ifndef __DRM_I2C_ADV7511_H__
+#define __DRM_I2C_ADV7511_H__
+
+#include <linux/hdmi.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_bridge.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+
+#define ADV7511_REG_CHIP_REVISION		0x00
+#define ADV7511_REG_N0				0x01
+#define ADV7511_REG_N1				0x02
+#define ADV7511_REG_N2				0x03
+#define ADV7511_REG_SPDIF_FREQ			0x04
+#define ADV7511_REG_CTS_AUTOMATIC1		0x05
+#define ADV7511_REG_CTS_AUTOMATIC2		0x06
+#define ADV7511_REG_CTS_MANUAL0			0x07
+#define ADV7511_REG_CTS_MANUAL1			0x08
+#define ADV7511_REG_CTS_MANUAL2			0x09
+#define ADV7511_REG_AUDIO_SOURCE		0x0a
+#define ADV7511_REG_AUDIO_CONFIG		0x0b
+#define ADV7511_REG_I2S_CONFIG			0x0c
+#define ADV7511_REG_I2S_WIDTH			0x0d
+#define ADV7511_REG_AUDIO_SUB_SRC0		0x0e
+#define ADV7511_REG_AUDIO_SUB_SRC1		0x0f
+#define ADV7511_REG_AUDIO_SUB_SRC2		0x10
+#define ADV7511_REG_AUDIO_SUB_SRC3		0x11
+#define ADV7511_REG_AUDIO_CFG1			0x12
+#define ADV7511_REG_AUDIO_CFG2			0x13
+#define ADV7511_REG_AUDIO_CFG3			0x14
+#define ADV7511_REG_I2C_FREQ_ID_CFG		0x15
+#define ADV7511_REG_VIDEO_INPUT_CFG1		0x16
+#define ADV7511_REG_CSC_UPPER(x)		(0x18 + (x) * 2)
+#define ADV7511_REG_CSC_LOWER(x)		(0x19 + (x) * 2)
+#define ADV7511_REG_SYNC_DECODER(x)		(0x30 + (x))
+#define ADV7511_REG_DE_GENERATOR		(0x35 + (x))
+#define ADV7511_REG_PIXEL_REPETITION		0x3b
+#define ADV7511_REG_VIC_MANUAL			0x3c
+#define ADV7511_REG_VIC_SEND			0x3d
+#define ADV7511_REG_VIC_DETECTED		0x3e
+#define ADV7511_REG_AUX_VIC_DETECTED		0x3f
+#define ADV7511_REG_PACKET_ENABLE0		0x40
+#define ADV7511_REG_POWER			0x41
+#define ADV7511_REG_STATUS			0x42
+#define ADV7511_REG_EDID_I2C_ADDR		0x43
+#define ADV7511_REG_PACKET_ENABLE1		0x44
+#define ADV7511_REG_PACKET_I2C_ADDR		0x45
+#define ADV7511_REG_DSD_ENABLE			0x46
+#define ADV7511_REG_VIDEO_INPUT_CFG2		0x48
+#define ADV7511_REG_INFOFRAME_UPDATE		0x4a
+#define ADV7511_REG_GC(x)			(0x4b + (x)) /* 0x4b - 0x51 */
+#define ADV7511_REG_AVI_INFOFRAME_VERSION	0x52
+#define ADV7511_REG_AVI_INFOFRAME_LENGTH	0x53
+#define ADV7511_REG_AVI_INFOFRAME_CHECKSUM	0x54
+#define ADV7511_REG_AVI_INFOFRAME(x)		(0x55 + (x)) /* 0x55 - 0x6f */
+#define ADV7511_REG_AUDIO_INFOFRAME_VERSION	0x70
+#define ADV7511_REG_AUDIO_INFOFRAME_LENGTH	0x71
+#define ADV7511_REG_AUDIO_INFOFRAME_CHECKSUM	0x72
+#define ADV7511_REG_AUDIO_INFOFRAME(x)		(0x73 + (x)) /* 0x73 - 0x7c */
+#define ADV7511_REG_INT_ENABLE(x)		(0x94 + (x))
+#define ADV7511_REG_INT(x)			(0x96 + (x))
+#define ADV7511_REG_INPUT_CLK_DIV		0x9d
+#define ADV7511_REG_PLL_STATUS			0x9e
+#define ADV7511_REG_HDMI_POWER			0xa1
+#define ADV7511_REG_HDCP_HDMI_CFG		0xaf
+#define ADV7511_REG_AN(x)			(0xb0 + (x)) /* 0xb0 - 0xb7 */
+#define ADV7511_REG_HDCP_STATUS			0xb8
+#define ADV7511_REG_BCAPS			0xbe
+#define ADV7511_REG_BKSV(x)			(0xc0 + (x)) /* 0xc0 - 0xc3 */
+#define ADV7511_REG_EDID_SEGMENT		0xc4
+#define ADV7511_REG_DDC_STATUS			0xc8
+#define ADV7511_REG_EDID_READ_CTRL		0xc9
+#define ADV7511_REG_BSTATUS(x)			(0xca + (x)) /* 0xca - 0xcb */
+#define ADV7511_REG_TIMING_GEN_SEQ		0xd0
+#define ADV7511_REG_POWER2			0xd6
+#define ADV7511_REG_HSYNC_PLACEMENT_MSB		0xfa
+
+#define ADV7511_REG_SYNC_ADJUSTMENT(x)		(0xd7 + (x)) /* 0xd7 - 0xdc */
+#define ADV7511_REG_TMDS_CLOCK_INV		0xde
+#define ADV7511_REG_ARC_CTRL			0xdf
+#define ADV7511_REG_CEC_I2C_ADDR		0xe1
+#define ADV7511_REG_CEC_CTRL			0xe2
+#define ADV7511_REG_CHIP_ID_HIGH		0xf5
+#define ADV7511_REG_CHIP_ID_LOW			0xf6
+
+/* Hardware defined default addresses for I2C register maps */
+#define ADV7511_CEC_I2C_ADDR_DEFAULT		0x3c
+#define ADV7511_EDID_I2C_ADDR_DEFAULT		0x3f
+#define ADV7511_PACKET_I2C_ADDR_DEFAULT		0x38
+
+#define ADV7511_CSC_ENABLE			BIT(7)
+#define ADV7511_CSC_UPDATE_MODE			BIT(5)
+
+#define ADV7511_INT0_HPD			BIT(7)
+#define ADV7511_INT0_VSYNC			BIT(5)
+#define ADV7511_INT0_AUDIO_FIFO_FULL		BIT(4)
+#define ADV7511_INT0_EDID_READY			BIT(2)
+#define ADV7511_INT0_HDCP_AUTHENTICATED		BIT(1)
+
+#define ADV7511_INT1_DDC_ERROR			BIT(7)
+#define ADV7511_INT1_BKSV			BIT(6)
+#define ADV7511_INT1_CEC_TX_READY		BIT(5)
+#define ADV7511_INT1_CEC_TX_ARBIT_LOST		BIT(4)
+#define ADV7511_INT1_CEC_TX_RETRY_TIMEOUT	BIT(3)
+#define ADV7511_INT1_CEC_RX_READY3		BIT(2)
+#define ADV7511_INT1_CEC_RX_READY2		BIT(1)
+#define ADV7511_INT1_CEC_RX_READY1		BIT(0)
+
+#define ADV7511_ARC_CTRL_POWER_DOWN		BIT(0)
+
+#define ADV7511_CEC_CTRL_POWER_DOWN		BIT(0)
+
+#define ADV7511_POWER_POWER_DOWN		BIT(6)
+
+#define ADV7511_HDMI_CFG_MODE_MASK		0x2
+#define ADV7511_HDMI_CFG_MODE_DVI		0x0
+#define ADV7511_HDMI_CFG_MODE_HDMI		0x2
+
+#define ADV7511_AUDIO_SELECT_I2C		0x0
+#define ADV7511_AUDIO_SELECT_SPDIF		0x1
+#define ADV7511_AUDIO_SELECT_DSD		0x2
+#define ADV7511_AUDIO_SELECT_HBR		0x3
+#define ADV7511_AUDIO_SELECT_DST		0x4
+
+#define ADV7511_I2S_SAMPLE_LEN_16		0x2
+#define ADV7511_I2S_SAMPLE_LEN_20		0x3
+#define ADV7511_I2S_SAMPLE_LEN_18		0x4
+#define ADV7511_I2S_SAMPLE_LEN_22		0x5
+#define ADV7511_I2S_SAMPLE_LEN_19		0x8
+#define ADV7511_I2S_SAMPLE_LEN_23		0x9
+#define ADV7511_I2S_SAMPLE_LEN_24		0xb
+#define ADV7511_I2S_SAMPLE_LEN_17		0xc
+#define ADV7511_I2S_SAMPLE_LEN_21		0xd
+
+#define ADV7511_SAMPLE_FREQ_44100		0x0
+#define ADV7511_SAMPLE_FREQ_48000		0x2
+#define ADV7511_SAMPLE_FREQ_32000		0x3
+#define ADV7511_SAMPLE_FREQ_88200		0x8
+#define ADV7511_SAMPLE_FREQ_96000		0xa
+#define ADV7511_SAMPLE_FREQ_176400		0xc
+#define ADV7511_SAMPLE_FREQ_192000		0xe
+
+#define ADV7511_STATUS_POWER_DOWN_POLARITY	BIT(7)
+#define ADV7511_STATUS_HPD			BIT(6)
+#define ADV7511_STATUS_MONITOR_SENSE		BIT(5)
+#define ADV7511_STATUS_I2S_32BIT_MODE		BIT(3)
+
+#define ADV7511_PACKET_ENABLE_N_CTS		BIT(8+6)
+#define ADV7511_PACKET_ENABLE_AUDIO_SAMPLE	BIT(8+5)
+#define ADV7511_PACKET_ENABLE_AVI_INFOFRAME	BIT(8+4)
+#define ADV7511_PACKET_ENABLE_AUDIO_INFOFRAME	BIT(8+3)
+#define ADV7511_PACKET_ENABLE_GC		BIT(7)
+#define ADV7511_PACKET_ENABLE_SPD		BIT(6)
+#define ADV7511_PACKET_ENABLE_MPEG		BIT(5)
+#define ADV7511_PACKET_ENABLE_ACP		BIT(4)
+#define ADV7511_PACKET_ENABLE_ISRC		BIT(3)
+#define ADV7511_PACKET_ENABLE_GM		BIT(2)
+#define ADV7511_PACKET_ENABLE_SPARE2		BIT(1)
+#define ADV7511_PACKET_ENABLE_SPARE1		BIT(0)
+
+#define ADV7535_REG_POWER2_HPD_OVERRIDE		BIT(6)
+#define ADV7511_REG_POWER2_HPD_SRC_MASK		0xc0
+#define ADV7511_REG_POWER2_HPD_SRC_BOTH		0x00
+#define ADV7511_REG_POWER2_HPD_SRC_HPD		0x40
+#define ADV7511_REG_POWER2_HPD_SRC_CEC		0x80
+#define ADV7511_REG_POWER2_HPD_SRC_NONE		0xc0
+#define ADV7511_REG_POWER2_TDMS_ENABLE		BIT(4)
+#define ADV7511_REG_POWER2_GATE_INPUT_CLK	BIT(0)
+
+#define ADV7511_LOW_REFRESH_RATE_NONE		0x0
+#define ADV7511_LOW_REFRESH_RATE_24HZ		0x1
+#define ADV7511_LOW_REFRESH_RATE_25HZ		0x2
+#define ADV7511_LOW_REFRESH_RATE_30HZ		0x3
+
+#define ADV7511_AUDIO_CFG3_LEN_MASK		0x0f
+#define ADV7511_I2C_FREQ_ID_CFG_RATE_MASK	0xf0
+
+#define ADV7511_AUDIO_SOURCE_I2S		0
+#define ADV7511_AUDIO_SOURCE_SPDIF		1
+
+#define ADV7511_I2S_FORMAT_I2S			0
+#define ADV7511_I2S_FORMAT_RIGHT_J		1
+#define ADV7511_I2S_FORMAT_LEFT_J		2
+#define ADV7511_I2S_IEC958_DIRECT		3
+
+#define ADV7511_PACKET(p, x)	    ((p) * 0x20 + (x))
+#define ADV7511_PACKET_SDP(x)	    ADV7511_PACKET(0, x)
+#define ADV7511_PACKET_MPEG(x)	    ADV7511_PACKET(1, x)
+#define ADV7511_PACKET_ACP(x)	    ADV7511_PACKET(2, x)
+#define ADV7511_PACKET_ISRC1(x)	    ADV7511_PACKET(3, x)
+#define ADV7511_PACKET_ISRC2(x)	    ADV7511_PACKET(4, x)
+#define ADV7511_PACKET_GM(x)	    ADV7511_PACKET(5, x)
+#define ADV7511_PACKET_SPARE(x)	    ADV7511_PACKET(6, x)
+
+#define ADV7511_REG_CEC_TX_FRAME_HDR	0x00
+#define ADV7511_REG_CEC_TX_FRAME_DATA0	0x01
+#define ADV7511_REG_CEC_TX_FRAME_LEN	0x10
+#define ADV7511_REG_CEC_TX_ENABLE	0x11
+#define ADV7511_REG_CEC_TX_RETRY	0x12
+#define ADV7511_REG_CEC_TX_LOW_DRV_CNT	0x14
+#define ADV7511_REG_CEC_RX1_FRAME_HDR	0x15
+#define ADV7511_REG_CEC_RX1_FRAME_DATA0	0x16
+#define ADV7511_REG_CEC_RX1_FRAME_LEN	0x25
+#define ADV7511_REG_CEC_RX_STATUS	0x26
+#define ADV7511_REG_CEC_RX2_FRAME_HDR	0x27
+#define ADV7511_REG_CEC_RX2_FRAME_DATA0	0x28
+#define ADV7511_REG_CEC_RX2_FRAME_LEN	0x37
+#define ADV7511_REG_CEC_RX3_FRAME_HDR	0x38
+#define ADV7511_REG_CEC_RX3_FRAME_DATA0	0x39
+#define ADV7511_REG_CEC_RX3_FRAME_LEN	0x48
+#define ADV7511_REG_CEC_RX_BUFFERS	0x4a
+#define ADV7511_REG_CEC_LOG_ADDR_MASK	0x4b
+#define ADV7511_REG_CEC_LOG_ADDR_0_1	0x4c
+#define ADV7511_REG_CEC_LOG_ADDR_2	0x4d
+#define ADV7511_REG_CEC_CLK_DIV		0x4e
+#define ADV7511_REG_CEC_SOFT_RESET	0x50
+
+#define ADV7533_REG_CEC_OFFSET		0x70
+
+enum adv7511_input_clock {
+	ADV7511_INPUT_CLOCK_1X,
+	ADV7511_INPUT_CLOCK_2X,
+	ADV7511_INPUT_CLOCK_DDR,
+};
+
+enum adv7511_input_justification {
+	ADV7511_INPUT_JUSTIFICATION_EVENLY = 0,
+	ADV7511_INPUT_JUSTIFICATION_RIGHT = 1,
+	ADV7511_INPUT_JUSTIFICATION_LEFT = 2,
+};
+
+enum adv7511_input_sync_pulse {
+	ADV7511_INPUT_SYNC_PULSE_DE = 0,
+	ADV7511_INPUT_SYNC_PULSE_HSYNC = 1,
+	ADV7511_INPUT_SYNC_PULSE_VSYNC = 2,
+	ADV7511_INPUT_SYNC_PULSE_NONE = 3,
+};
+
+/**
+ * enum adv7511_sync_polarity - Polarity for the input sync signals
+ * @ADV7511_SYNC_POLARITY_PASSTHROUGH:  Sync polarity matches that of
+ *				       the currently configured mode.
+ * @ADV7511_SYNC_POLARITY_LOW:	    Sync polarity is low
+ * @ADV7511_SYNC_POLARITY_HIGH:	    Sync polarity is high
+ *
+ * If the polarity is set to either LOW or HIGH the driver will configure the
+ * ADV7511 to internally invert the sync signal if required to match the sync
+ * polarity setting for the currently selected output mode.
+ *
+ * If the polarity is set to PASSTHROUGH, the ADV7511 will route the signal
+ * unchanged. This is used when the upstream graphics core already generates
+ * the sync signals with the correct polarity.
+ */
+enum adv7511_sync_polarity {
+	ADV7511_SYNC_POLARITY_PASSTHROUGH,
+	ADV7511_SYNC_POLARITY_LOW,
+	ADV7511_SYNC_POLARITY_HIGH,
+};
+
+/**
+ * struct adv7511_link_config - Describes adv7511 hardware configuration
+ * @input_color_depth:		Number of bits per color component (8, 10 or 12)
+ * @input_colorspace:		The input colorspace (RGB, YUV444, YUV422)
+ * @input_clock:		The input video clock style (1x, 2x, DDR)
+ * @input_style:		The input component arrangement variant
+ * @input_justification:	Video input format bit justification
+ * @clock_delay:		Clock delay for the input clock (in ps)
+ * @embedded_sync:		Video input uses BT.656-style embedded sync
+ * @sync_pulse:			Select the sync pulse
+ * @vsync_polarity:		vsync input signal configuration
+ * @hsync_polarity:		hsync input signal configuration
+ */
+struct adv7511_link_config {
+	unsigned int input_color_depth;
+	enum hdmi_colorspace input_colorspace;
+	enum adv7511_input_clock input_clock;
+	unsigned int input_style;
+	enum adv7511_input_justification input_justification;
+
+	int clock_delay;
+
+	bool embedded_sync;
+	enum adv7511_input_sync_pulse sync_pulse;
+	enum adv7511_sync_polarity vsync_polarity;
+	enum adv7511_sync_polarity hsync_polarity;
+};
+
+/**
+ * enum adv7511_csc_scaling - Scaling factor for the ADV7511 CSC
+ * @ADV7511_CSC_SCALING_1: CSC results are not scaled
+ * @ADV7511_CSC_SCALING_2: CSC results are scaled by a factor of two
+ * @ADV7511_CSC_SCALING_4: CSC results are scalled by a factor of four
+ */
+enum adv7511_csc_scaling {
+	ADV7511_CSC_SCALING_1 = 0,
+	ADV7511_CSC_SCALING_2 = 1,
+	ADV7511_CSC_SCALING_4 = 2,
+};
+
+/**
+ * struct adv7511_video_config - Describes adv7511 hardware configuration
+ * @csc_enable:			Whether to enable color space conversion
+ * @csc_scaling_factor:		Color space conversion scaling factor
+ * @csc_coefficents:		Color space conversion coefficents
+ * @hdmi_mode:			Whether to use HDMI or DVI output mode
+ * @avi_infoframe:		HDMI infoframe
+ */
+struct adv7511_video_config {
+	bool csc_enable;
+	enum adv7511_csc_scaling csc_scaling_factor;
+	const uint16_t *csc_coefficents;
+
+	bool hdmi_mode;
+	struct hdmi_avi_infoframe avi_infoframe;
+};
+
+enum adv7511_type {
+	ADV7511,
+	ADV7533,
+	ADV7535,
+};
+
+#define ADV7511_MAX_ADDRS 3
+
+struct adv7511 {
+	struct i2c_client *i2c_main;
+	struct i2c_client *i2c_edid;
+	struct i2c_client *i2c_packet;
+	struct i2c_client *i2c_cec;
+
+	struct regmap *regmap;
+	struct regmap *regmap_cec;
+	unsigned int reg_cec_offset;
+	enum drm_connector_status status;
+	bool powered;
+
+	struct drm_display_mode curr_mode;
+
+	unsigned int f_tmds;
+	unsigned int f_audio;
+	unsigned int audio_source;
+
+	unsigned int current_edid_segment;
+	uint8_t edid_buf[256];
+	bool edid_read;
+
+	wait_queue_head_t wq;
+	struct work_struct hpd_work;
+
+	struct drm_bridge bridge;
+	struct drm_connector connector;
+
+	bool embedded_sync;
+	enum adv7511_sync_polarity vsync_polarity;
+	enum adv7511_sync_polarity hsync_polarity;
+	bool rgb;
+
+	struct gpio_desc *gpio_pd;
+
+	struct regulator_bulk_data *supplies;
+	unsigned int num_supplies;
+
+	/* ADV7533 DSI RX related params */
+	struct device_node *host_node;
+	struct mipi_dsi_device *dsi;
+	u8 num_dsi_lanes;
+	bool use_timing_gen;
+
+	enum adv7511_type type;
+	struct platform_device *audio_pdev;
+
+	struct cec_adapter *cec_adap;
+	u8   cec_addr[ADV7511_MAX_ADDRS];
+	u8   cec_valid_addrs;
+	bool cec_enabled_adap;
+	struct clk *cec_clk;
+	u32 cec_clk_freq;
+};
+
+#ifdef CONFIG_DRM_I2C_ADV7511_CEC
+int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511);
+void adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1);
+#else
+static inline int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
+{
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
+		     ADV7511_CEC_CTRL_POWER_DOWN);
+	return 0;
+}
+#endif
+
+void adv7533_dsi_power_on(struct adv7511 *adv);
+void adv7533_dsi_power_off(struct adv7511 *adv);
+enum drm_mode_status adv7533_mode_valid(struct adv7511 *adv,
+					const struct drm_display_mode *mode);
+int adv7533_patch_registers(struct adv7511 *adv);
+int adv7533_patch_cec_registers(struct adv7511 *adv);
+int adv7533_attach_dsi(struct adv7511 *adv);
+int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv);
+
+#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
+int adv7511_audio_init(struct device *dev, struct adv7511 *adv7511);
+void adv7511_audio_exit(struct adv7511 *adv7511);
+#else /*CONFIG_DRM_I2C_ADV7511_AUDIO */
+static inline int adv7511_audio_init(struct device *dev, struct adv7511 *adv7511)
+{
+	return 0;
+}
+static inline void adv7511_audio_exit(struct adv7511 *adv7511)
+{
+}
+#endif /* CONFIG_DRM_I2C_ADV7511_AUDIO */
+
+#endif /* __DRM_I2C_ADV7511_H__ */