Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 197 insertions, 0 deletions

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-gp-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-gp-audio.c
new file mode 100644
index 000000000..557966239
--- /dev/null
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-gp-audio.c
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * dw-hdmi-gp-audio.c
+ *
+ * Copyright 2020-2022 NXP
+ */
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <drm/bridge/dw_hdmi.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_connector.h>
+
+#include <sound/hdmi-codec.h>
+#include <sound/asoundef.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/pcm_drm_eld.h>
+#include <sound/pcm_iec958.h>
+#include <sound/dmaengine_pcm.h>
+
+#include "dw-hdmi-audio.h"
+
+#define DRIVER_NAME "dw-hdmi-gp-audio"
+#define DRV_NAME    "hdmi-gp-audio"
+
+struct snd_dw_hdmi {
+	struct dw_hdmi_audio_data data;
+	struct platform_device  *audio_pdev;
+	unsigned int pos;
+};
+
+struct dw_hdmi_channel_conf {
+	u8 conf1;
+	u8 ca;
+};
+
+/*
+ * The default mapping of ALSA channels to HDMI channels and speaker
+ * allocation bits.  Note that we can't do channel remapping here -
+ * channels must be in the same order.
+ *
+ * Mappings for alsa-lib pcm/surround*.conf files:
+ *
+ *		Front	Sur4.0	Sur4.1	Sur5.0	Sur5.1	Sur7.1
+ * Channels	2	4	6	6	6	8
+ *
+ * Our mapping from ALSA channel to CEA686D speaker name and HDMI channel:
+ *
+ *				Number of ALSA channels
+ * ALSA Channel	2	3	4	5	6	7	8
+ * 0		FL:0	=	=	=	=	=	=
+ * 1		FR:1	=	=	=	=	=	=
+ * 2			FC:3	RL:4	LFE:2	=	=	=
+ * 3				RR:5	RL:4	FC:3	=	=
+ * 4					RR:5	RL:4	=	=
+ * 5						RR:5	=	=
+ * 6							RC:6	=
+ * 7							RLC/FRC	RLC/FRC
+ */
+static struct dw_hdmi_channel_conf default_hdmi_channel_config[7] = {
+	{ 0x03, 0x00 },	/* FL,FR */
+	{ 0x0b, 0x02 },	/* FL,FR,FC */
+	{ 0x33, 0x08 },	/* FL,FR,RL,RR */
+	{ 0x37, 0x09 },	/* FL,FR,LFE,RL,RR */
+	{ 0x3f, 0x0b },	/* FL,FR,LFE,FC,RL,RR */
+	{ 0x7f, 0x0f },	/* FL,FR,LFE,FC,RL,RR,RC */
+	{ 0xff, 0x13 },	/* FL,FR,LFE,FC,RL,RR,[FR]RC,[FR]LC */
+};
+
+static int audio_hw_params(struct device *dev,  void *data,
+			   struct hdmi_codec_daifmt *daifmt,
+			   struct hdmi_codec_params *params)
+{
+	struct snd_dw_hdmi *dw = dev_get_drvdata(dev);
+	u8 ca;
+
+	dw_hdmi_set_sample_rate(dw->data.hdmi, params->sample_rate);
+
+	ca = default_hdmi_channel_config[params->channels - 2].ca;
+
+	dw_hdmi_set_channel_count(dw->data.hdmi, params->channels);
+	dw_hdmi_set_channel_allocation(dw->data.hdmi, ca);
+
+	dw_hdmi_set_sample_non_pcm(dw->data.hdmi,
+				   params->iec.status[0] & IEC958_AES0_NONAUDIO);
+	dw_hdmi_set_sample_width(dw->data.hdmi, params->sample_width);
+
+	return 0;
+}
+
+static void audio_shutdown(struct device *dev, void *data)
+{
+}
+
+static int audio_mute_stream(struct device *dev, void *data,
+			     bool enable, int direction)
+{
+	struct snd_dw_hdmi *dw = dev_get_drvdata(dev);
+
+	if (!enable)
+		dw_hdmi_audio_enable(dw->data.hdmi);
+	else
+		dw_hdmi_audio_disable(dw->data.hdmi);
+
+	return 0;
+}
+
+static int audio_get_eld(struct device *dev, void *data,
+			 u8 *buf, size_t len)
+{
+	struct dw_hdmi_audio_data *audio = data;
+	u8 *eld;
+
+	eld = audio->get_eld(audio->hdmi);
+	if (eld)
+		memcpy(buf, eld, min_t(size_t, MAX_ELD_BYTES, len));
+	else
+		/* Pass en empty ELD if connector not available */
+		memset(buf, 0, len);
+
+	return 0;
+}
+
+static int audio_hook_plugged_cb(struct device *dev, void *data,
+				 hdmi_codec_plugged_cb fn,
+				 struct device *codec_dev)
+{
+	struct snd_dw_hdmi *dw = dev_get_drvdata(dev);
+
+	return dw_hdmi_set_plugged_cb(dw->data.hdmi, fn, codec_dev);
+}
+
+static const struct hdmi_codec_ops audio_codec_ops = {
+	.hw_params = audio_hw_params,
+	.audio_shutdown = audio_shutdown,
+	.mute_stream = audio_mute_stream,
+	.get_eld = audio_get_eld,
+	.hook_plugged_cb = audio_hook_plugged_cb,
+};
+
+static int snd_dw_hdmi_probe(struct platform_device *pdev)
+{
+	struct dw_hdmi_audio_data *data = pdev->dev.platform_data;
+	struct snd_dw_hdmi *dw;
+
+	const struct hdmi_codec_pdata codec_data = {
+		.i2s = 1,
+		.spdif = 0,
+		.ops = &audio_codec_ops,
+		.max_i2s_channels = 8,
+		.data = data,
+	};
+
+	dw = devm_kzalloc(&pdev->dev, sizeof(*dw), GFP_KERNEL);
+	if (!dw)
+		return -ENOMEM;
+
+	dw->data = *data;
+
+	platform_set_drvdata(pdev, dw);
+
+	dw->audio_pdev = platform_device_register_data(&pdev->dev,
+						       HDMI_CODEC_DRV_NAME, 1,
+						       &codec_data,
+						       sizeof(codec_data));
+
+	return PTR_ERR_OR_ZERO(dw->audio_pdev);
+}
+
+static int snd_dw_hdmi_remove(struct platform_device *pdev)
+{
+	struct snd_dw_hdmi *dw = platform_get_drvdata(pdev);
+
+	platform_device_unregister(dw->audio_pdev);
+
+	return 0;
+}
+
+static struct platform_driver snd_dw_hdmi_driver = {
+	.probe	= snd_dw_hdmi_probe,
+	.remove	= snd_dw_hdmi_remove,
+	.driver	= {
+		.name = DRIVER_NAME,
+	},
+};
+
+module_platform_driver(snd_dw_hdmi_driver);
+
+MODULE_AUTHOR("Shengjiu Wang <shengjiu.wang@nxp.com>");
+MODULE_DESCRIPTION("Synopsys Designware HDMI GPA ALSA interface");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);