Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1245 insertions, 0 deletions

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
new file mode 100644
index 000000000..b2efecf7d
--- /dev/null
+++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
@@ -0,0 +1,1245 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (C) STMicroelectronics SA 2017
+ *
+ * Modified by Philippe Cornu <philippe.cornu@st.com>
+ * This generic Synopsys DesignWare MIPI DSI host driver is based on the
+ * Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/debugfs.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/bridge/dw_mipi_dsi.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_of.h>
+#include <drm/drm_print.h>
+
+#define HWVER_131			0x31333100	/* IP version 1.31 */
+
+#define DSI_VERSION			0x00
+#define VERSION				GENMASK(31, 8)
+
+#define DSI_PWR_UP			0x04
+#define RESET				0
+#define POWERUP				BIT(0)
+
+#define DSI_CLKMGR_CFG			0x08
+#define TO_CLK_DIVISION(div)		(((div) & 0xff) << 8)
+#define TX_ESC_CLK_DIVISION(div)	((div) & 0xff)
+
+#define DSI_DPI_VCID			0x0c
+#define DPI_VCID(vcid)			((vcid) & 0x3)
+
+#define DSI_DPI_COLOR_CODING		0x10
+#define LOOSELY18_EN			BIT(8)
+#define DPI_COLOR_CODING_16BIT_1	0x0
+#define DPI_COLOR_CODING_16BIT_2	0x1
+#define DPI_COLOR_CODING_16BIT_3	0x2
+#define DPI_COLOR_CODING_18BIT_1	0x3
+#define DPI_COLOR_CODING_18BIT_2	0x4
+#define DPI_COLOR_CODING_24BIT		0x5
+
+#define DSI_DPI_CFG_POL			0x14
+#define COLORM_ACTIVE_LOW		BIT(4)
+#define SHUTD_ACTIVE_LOW		BIT(3)
+#define HSYNC_ACTIVE_LOW		BIT(2)
+#define VSYNC_ACTIVE_LOW		BIT(1)
+#define DATAEN_ACTIVE_LOW		BIT(0)
+
+#define DSI_DPI_LP_CMD_TIM		0x18
+#define OUTVACT_LPCMD_TIME(p)		(((p) & 0xff) << 16)
+#define INVACT_LPCMD_TIME(p)		((p) & 0xff)
+
+#define DSI_DBI_VCID			0x1c
+#define DSI_DBI_CFG			0x20
+#define DSI_DBI_PARTITIONING_EN		0x24
+#define DSI_DBI_CMDSIZE			0x28
+
+#define DSI_PCKHDL_CFG			0x2c
+#define CRC_RX_EN			BIT(4)
+#define ECC_RX_EN			BIT(3)
+#define BTA_EN				BIT(2)
+#define EOTP_RX_EN			BIT(1)
+#define EOTP_TX_EN			BIT(0)
+
+#define DSI_GEN_VCID			0x30
+
+#define DSI_MODE_CFG			0x34
+#define ENABLE_VIDEO_MODE		0
+#define ENABLE_CMD_MODE			BIT(0)
+
+#define DSI_VID_MODE_CFG		0x38
+#define ENABLE_LOW_POWER		(0x3f << 8)
+#define ENABLE_LOW_POWER_MASK		(0x3f << 8)
+#define VID_MODE_TYPE_NON_BURST_SYNC_PULSES	0x0
+#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS	0x1
+#define VID_MODE_TYPE_BURST			0x2
+#define VID_MODE_TYPE_MASK			0x3
+#define ENABLE_LOW_POWER_CMD		BIT(15)
+#define VID_MODE_VPG_ENABLE		BIT(16)
+#define VID_MODE_VPG_MODE		BIT(20)
+#define VID_MODE_VPG_HORIZONTAL		BIT(24)
+
+#define DSI_VID_PKT_SIZE		0x3c
+#define VID_PKT_SIZE(p)			((p) & 0x3fff)
+
+#define DSI_VID_NUM_CHUNKS		0x40
+#define VID_NUM_CHUNKS(c)		((c) & 0x1fff)
+
+#define DSI_VID_NULL_SIZE		0x44
+#define VID_NULL_SIZE(b)		((b) & 0x1fff)
+
+#define DSI_VID_HSA_TIME		0x48
+#define DSI_VID_HBP_TIME		0x4c
+#define DSI_VID_HLINE_TIME		0x50
+#define DSI_VID_VSA_LINES		0x54
+#define DSI_VID_VBP_LINES		0x58
+#define DSI_VID_VFP_LINES		0x5c
+#define DSI_VID_VACTIVE_LINES		0x60
+#define DSI_EDPI_CMD_SIZE		0x64
+
+#define DSI_CMD_MODE_CFG		0x68
+#define MAX_RD_PKT_SIZE_LP		BIT(24)
+#define DCS_LW_TX_LP			BIT(19)
+#define DCS_SR_0P_TX_LP			BIT(18)
+#define DCS_SW_1P_TX_LP			BIT(17)
+#define DCS_SW_0P_TX_LP			BIT(16)
+#define GEN_LW_TX_LP			BIT(14)
+#define GEN_SR_2P_TX_LP			BIT(13)
+#define GEN_SR_1P_TX_LP			BIT(12)
+#define GEN_SR_0P_TX_LP			BIT(11)
+#define GEN_SW_2P_TX_LP			BIT(10)
+#define GEN_SW_1P_TX_LP			BIT(9)
+#define GEN_SW_0P_TX_LP			BIT(8)
+#define ACK_RQST_EN			BIT(1)
+#define TEAR_FX_EN			BIT(0)
+
+#define CMD_MODE_ALL_LP			(MAX_RD_PKT_SIZE_LP | \
+					 DCS_LW_TX_LP | \
+					 DCS_SR_0P_TX_LP | \
+					 DCS_SW_1P_TX_LP | \
+					 DCS_SW_0P_TX_LP | \
+					 GEN_LW_TX_LP | \
+					 GEN_SR_2P_TX_LP | \
+					 GEN_SR_1P_TX_LP | \
+					 GEN_SR_0P_TX_LP | \
+					 GEN_SW_2P_TX_LP | \
+					 GEN_SW_1P_TX_LP | \
+					 GEN_SW_0P_TX_LP)
+
+#define DSI_GEN_HDR			0x6c
+#define DSI_GEN_PLD_DATA		0x70
+
+#define DSI_CMD_PKT_STATUS		0x74
+#define GEN_RD_CMD_BUSY			BIT(6)
+#define GEN_PLD_R_FULL			BIT(5)
+#define GEN_PLD_R_EMPTY			BIT(4)
+#define GEN_PLD_W_FULL			BIT(3)
+#define GEN_PLD_W_EMPTY			BIT(2)
+#define GEN_CMD_FULL			BIT(1)
+#define GEN_CMD_EMPTY			BIT(0)
+
+#define DSI_TO_CNT_CFG			0x78
+#define HSTX_TO_CNT(p)			(((p) & 0xffff) << 16)
+#define LPRX_TO_CNT(p)			((p) & 0xffff)
+
+#define DSI_HS_RD_TO_CNT		0x7c
+#define DSI_LP_RD_TO_CNT		0x80
+#define DSI_HS_WR_TO_CNT		0x84
+#define DSI_LP_WR_TO_CNT		0x88
+#define DSI_BTA_TO_CNT			0x8c
+
+#define DSI_LPCLK_CTRL			0x94
+#define AUTO_CLKLANE_CTRL		BIT(1)
+#define PHY_TXREQUESTCLKHS		BIT(0)
+
+#define DSI_PHY_TMR_LPCLK_CFG		0x98
+#define PHY_CLKHS2LP_TIME(lbcc)		(((lbcc) & 0x3ff) << 16)
+#define PHY_CLKLP2HS_TIME(lbcc)		((lbcc) & 0x3ff)
+
+#define DSI_PHY_TMR_CFG			0x9c
+#define PHY_HS2LP_TIME(lbcc)		(((lbcc) & 0xff) << 24)
+#define PHY_LP2HS_TIME(lbcc)		(((lbcc) & 0xff) << 16)
+#define MAX_RD_TIME(lbcc)		((lbcc) & 0x7fff)
+#define PHY_HS2LP_TIME_V131(lbcc)	(((lbcc) & 0x3ff) << 16)
+#define PHY_LP2HS_TIME_V131(lbcc)	((lbcc) & 0x3ff)
+
+#define DSI_PHY_RSTZ			0xa0
+#define PHY_DISFORCEPLL			0
+#define PHY_ENFORCEPLL			BIT(3)
+#define PHY_DISABLECLK			0
+#define PHY_ENABLECLK			BIT(2)
+#define PHY_RSTZ			0
+#define PHY_UNRSTZ			BIT(1)
+#define PHY_SHUTDOWNZ			0
+#define PHY_UNSHUTDOWNZ			BIT(0)
+
+#define DSI_PHY_IF_CFG			0xa4
+#define PHY_STOP_WAIT_TIME(cycle)	(((cycle) & 0xff) << 8)
+#define N_LANES(n)			(((n) - 1) & 0x3)
+
+#define DSI_PHY_ULPS_CTRL		0xa8
+#define DSI_PHY_TX_TRIGGERS		0xac
+
+#define DSI_PHY_STATUS			0xb0
+#define PHY_STOP_STATE_CLK_LANE		BIT(2)
+#define PHY_LOCK			BIT(0)
+
+#define DSI_PHY_TST_CTRL0		0xb4
+#define PHY_TESTCLK			BIT(1)
+#define PHY_UNTESTCLK			0
+#define PHY_TESTCLR			BIT(0)
+#define PHY_UNTESTCLR			0
+
+#define DSI_PHY_TST_CTRL1		0xb8
+#define PHY_TESTEN			BIT(16)
+#define PHY_UNTESTEN			0
+#define PHY_TESTDOUT(n)			(((n) & 0xff) << 8)
+#define PHY_TESTDIN(n)			((n) & 0xff)
+
+#define DSI_INT_ST0			0xbc
+#define DSI_INT_ST1			0xc0
+#define DSI_INT_MSK0			0xc4
+#define DSI_INT_MSK1			0xc8
+
+#define DSI_PHY_TMR_RD_CFG		0xf4
+#define MAX_RD_TIME_V131(lbcc)		((lbcc) & 0x7fff)
+
+#define PHY_STATUS_TIMEOUT_US		10000
+#define CMD_PKT_STATUS_TIMEOUT_US	20000
+
+#ifdef CONFIG_DEBUG_FS
+#define VPG_DEFS(name, dsi) \
+	((void __force *)&((*dsi).vpg_defs.name))
+
+#define REGISTER(name, mask, dsi) \
+	{ #name, VPG_DEFS(name, dsi), mask, dsi }
+
+struct debugfs_entries {
+	const char				*name;
+	bool					*reg;
+	u32					mask;
+	struct dw_mipi_dsi			*dsi;
+};
+#endif /* CONFIG_DEBUG_FS */
+
+struct dw_mipi_dsi {
+	struct drm_bridge bridge;
+	struct mipi_dsi_host dsi_host;
+	struct drm_bridge *panel_bridge;
+	struct device *dev;
+	void __iomem *base;
+
+	struct clk *pclk;
+
+	unsigned int lane_mbps; /* per lane */
+	u32 channel;
+	u32 lanes;
+	u32 format;
+	unsigned long mode_flags;
+
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *debugfs;
+	struct debugfs_entries *debugfs_vpg;
+	struct {
+		bool vpg;
+		bool vpg_horizontal;
+		bool vpg_ber_pattern;
+	} vpg_defs;
+#endif /* CONFIG_DEBUG_FS */
+
+	struct dw_mipi_dsi *master; /* dual-dsi master ptr */
+	struct dw_mipi_dsi *slave; /* dual-dsi slave ptr */
+
+	const struct dw_mipi_dsi_plat_data *plat_data;
+};
+
+/*
+ * Check if either a link to a master or slave is present
+ */
+static inline bool dw_mipi_is_dual_mode(struct dw_mipi_dsi *dsi)
+{
+	return dsi->slave || dsi->master;
+}
+
+/*
+ * The controller should generate 2 frames before
+ * preparing the peripheral.
+ */
+static void dw_mipi_dsi_wait_for_two_frames(const struct drm_display_mode *mode)
+{
+	int refresh, two_frames;
+
+	refresh = drm_mode_vrefresh(mode);
+	two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
+	msleep(two_frames);
+}
+
+static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host)
+{
+	return container_of(host, struct dw_mipi_dsi, dsi_host);
+}
+
+static inline struct dw_mipi_dsi *bridge_to_dsi(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct dw_mipi_dsi, bridge);
+}
+
+static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
+{
+	writel(val, dsi->base + reg);
+}
+
+static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
+{
+	return readl(dsi->base + reg);
+}
+
+static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
+				   struct mipi_dsi_device *device)
+{
+	struct dw_mipi_dsi *dsi = host_to_dsi(host);
+	const struct dw_mipi_dsi_plat_data *pdata = dsi->plat_data;
+	struct drm_bridge *bridge;
+	int ret;
+
+	if (device->lanes > dsi->plat_data->max_data_lanes) {
+		dev_err(dsi->dev, "the number of data lanes(%u) is too many\n",
+			device->lanes);
+		return -EINVAL;
+	}
+
+	dsi->lanes = device->lanes;
+	dsi->channel = device->channel;
+	dsi->format = device->format;
+	dsi->mode_flags = device->mode_flags;
+
+	bridge = devm_drm_of_get_bridge(dsi->dev, dsi->dev->of_node, 1, 0);
+	if (IS_ERR(bridge))
+		return PTR_ERR(bridge);
+
+	dsi->panel_bridge = bridge;
+
+	drm_bridge_add(&dsi->bridge);
+
+	if (pdata->host_ops && pdata->host_ops->attach) {
+		ret = pdata->host_ops->attach(pdata->priv_data, device);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
+				   struct mipi_dsi_device *device)
+{
+	struct dw_mipi_dsi *dsi = host_to_dsi(host);
+	const struct dw_mipi_dsi_plat_data *pdata = dsi->plat_data;
+	int ret;
+
+	if (pdata->host_ops && pdata->host_ops->detach) {
+		ret = pdata->host_ops->detach(pdata->priv_data, device);
+		if (ret < 0)
+			return ret;
+	}
+
+	drm_of_panel_bridge_remove(host->dev->of_node, 1, 0);
+
+	drm_bridge_remove(&dsi->bridge);
+
+	return 0;
+}
+
+static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
+				   const struct mipi_dsi_msg *msg)
+{
+	bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM;
+	u32 val = 0;
+
+	/*
+	 * TODO dw drv improvements
+	 * largest packet sizes during hfp or during vsa/vpb/vfp
+	 * should be computed according to byte lane, lane number and only
+	 * if sending lp cmds in high speed is enable (PHY_TXREQUESTCLKHS)
+	 */
+	dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(16)
+		  | INVACT_LPCMD_TIME(4));
+
+	if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
+		val |= ACK_RQST_EN;
+	if (lpm)
+		val |= CMD_MODE_ALL_LP;
+
+	dsi_write(dsi, DSI_CMD_MODE_CFG, val);
+
+	val = dsi_read(dsi, DSI_VID_MODE_CFG);
+	if (lpm)
+		val |= ENABLE_LOW_POWER_CMD;
+	else
+		val &= ~ENABLE_LOW_POWER_CMD;
+	dsi_write(dsi, DSI_VID_MODE_CFG, val);
+}
+
+static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
+{
+	int ret;
+	u32 val, mask;
+
+	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+				 val, !(val & GEN_CMD_FULL), 1000,
+				 CMD_PKT_STATUS_TIMEOUT_US);
+	if (ret) {
+		dev_err(dsi->dev, "failed to get available command FIFO\n");
+		return ret;
+	}
+
+	dsi_write(dsi, DSI_GEN_HDR, hdr_val);
+
+	mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY;
+	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+				 val, (val & mask) == mask,
+				 1000, CMD_PKT_STATUS_TIMEOUT_US);
+	if (ret) {
+		dev_err(dsi->dev, "failed to write command FIFO\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int dw_mipi_dsi_write(struct dw_mipi_dsi *dsi,
+			     const struct mipi_dsi_packet *packet)
+{
+	const u8 *tx_buf = packet->payload;
+	int len = packet->payload_length, pld_data_bytes = sizeof(u32), ret;
+	__le32 word;
+	u32 val;
+
+	while (len) {
+		if (len < pld_data_bytes) {
+			word = 0;
+			memcpy(&word, tx_buf, len);
+			dsi_write(dsi, DSI_GEN_PLD_DATA, le32_to_cpu(word));
+			len = 0;
+		} else {
+			memcpy(&word, tx_buf, pld_data_bytes);
+			dsi_write(dsi, DSI_GEN_PLD_DATA, le32_to_cpu(word));
+			tx_buf += pld_data_bytes;
+			len -= pld_data_bytes;
+		}
+
+		ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+					 val, !(val & GEN_PLD_W_FULL), 1000,
+					 CMD_PKT_STATUS_TIMEOUT_US);
+		if (ret) {
+			dev_err(dsi->dev,
+				"failed to get available write payload FIFO\n");
+			return ret;
+		}
+	}
+
+	word = 0;
+	memcpy(&word, packet->header, sizeof(packet->header));
+	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, le32_to_cpu(word));
+}
+
+static int dw_mipi_dsi_read(struct dw_mipi_dsi *dsi,
+			    const struct mipi_dsi_msg *msg)
+{
+	int i, j, ret, len = msg->rx_len;
+	u8 *buf = msg->rx_buf;
+	u32 val;
+
+	/* Wait end of the read operation */
+	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+				 val, !(val & GEN_RD_CMD_BUSY),
+				 1000, CMD_PKT_STATUS_TIMEOUT_US);
+	if (ret) {
+		dev_err(dsi->dev, "Timeout during read operation\n");
+		return ret;
+	}
+
+	for (i = 0; i < len; i += 4) {
+		/* Read fifo must not be empty before all bytes are read */
+		ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+					 val, !(val & GEN_PLD_R_EMPTY),
+					 1000, CMD_PKT_STATUS_TIMEOUT_US);
+		if (ret) {
+			dev_err(dsi->dev, "Read payload FIFO is empty\n");
+			return ret;
+		}
+
+		val = dsi_read(dsi, DSI_GEN_PLD_DATA);
+		for (j = 0; j < 4 && j + i < len; j++)
+			buf[i + j] = val >> (8 * j);
+	}
+
+	return ret;
+}
+
+static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
+					 const struct mipi_dsi_msg *msg)
+{
+	struct dw_mipi_dsi *dsi = host_to_dsi(host);
+	struct mipi_dsi_packet packet;
+	int ret, nb_bytes;
+
+	ret = mipi_dsi_create_packet(&packet, msg);
+	if (ret) {
+		dev_err(dsi->dev, "failed to create packet: %d\n", ret);
+		return ret;
+	}
+
+	dw_mipi_message_config(dsi, msg);
+	if (dsi->slave)
+		dw_mipi_message_config(dsi->slave, msg);
+
+	ret = dw_mipi_dsi_write(dsi, &packet);
+	if (ret)
+		return ret;
+	if (dsi->slave) {
+		ret = dw_mipi_dsi_write(dsi->slave, &packet);
+		if (ret)
+			return ret;
+	}
+
+	if (msg->rx_buf && msg->rx_len) {
+		ret = dw_mipi_dsi_read(dsi, msg);
+		if (ret)
+			return ret;
+		nb_bytes = msg->rx_len;
+	} else {
+		nb_bytes = packet.size;
+	}
+
+	return nb_bytes;
+}
+
+static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = {
+	.attach = dw_mipi_dsi_host_attach,
+	.detach = dw_mipi_dsi_host_detach,
+	.transfer = dw_mipi_dsi_host_transfer,
+};
+
+static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
+{
+	u32 val;
+
+	/*
+	 * TODO dw drv improvements
+	 * enabling low power is panel-dependent, we should use the
+	 * panel configuration here...
+	 */
+	val = ENABLE_LOW_POWER;
+
+	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
+		val |= VID_MODE_TYPE_BURST;
+	else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
+		val |= VID_MODE_TYPE_NON_BURST_SYNC_PULSES;
+	else
+		val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
+
+#ifdef CONFIG_DEBUG_FS
+	if (dsi->vpg_defs.vpg) {
+		val |= VID_MODE_VPG_ENABLE;
+		val |= dsi->vpg_defs.vpg_horizontal ?
+		       VID_MODE_VPG_HORIZONTAL : 0;
+		val |= dsi->vpg_defs.vpg_ber_pattern ? VID_MODE_VPG_MODE : 0;
+	}
+#endif /* CONFIG_DEBUG_FS */
+
+	dsi_write(dsi, DSI_VID_MODE_CFG, val);
+}
+
+static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
+				 unsigned long mode_flags)
+{
+	u32 val;
+
+	dsi_write(dsi, DSI_PWR_UP, RESET);
+
+	if (mode_flags & MIPI_DSI_MODE_VIDEO) {
+		dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
+		dw_mipi_dsi_video_mode_config(dsi);
+	} else {
+		dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
+	}
+
+	val = PHY_TXREQUESTCLKHS;
+	if (dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS)
+		val |= AUTO_CLKLANE_CTRL;
+	dsi_write(dsi, DSI_LPCLK_CTRL, val);
+
+	dsi_write(dsi, DSI_PWR_UP, POWERUP);
+}
+
+static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)
+{
+	dsi_write(dsi, DSI_PWR_UP, RESET);
+	dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ);
+}
+
+static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
+{
+	const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
+	unsigned int esc_rate; /* in MHz */
+	u32 esc_clk_division;
+	int ret;
+
+	/*
+	 * The maximum permitted escape clock is 20MHz and it is derived from
+	 * lanebyteclk, which is running at "lane_mbps / 8".
+	 */
+	if (phy_ops->get_esc_clk_rate) {
+		ret = phy_ops->get_esc_clk_rate(dsi->plat_data->priv_data,
+						&esc_rate);
+		if (ret)
+			DRM_DEBUG_DRIVER("Phy get_esc_clk_rate() failed\n");
+	} else
+		esc_rate = 20; /* Default to 20MHz */
+
+	/*
+	 * We want :
+	 *     (lane_mbps >> 3) / esc_clk_division < X
+	 * which is:
+	 *     (lane_mbps >> 3) / X > esc_clk_division
+	 */
+	esc_clk_division = (dsi->lane_mbps >> 3) / esc_rate + 1;
+
+	dsi_write(dsi, DSI_PWR_UP, RESET);
+
+	/*
+	 * TODO dw drv improvements
+	 * timeout clock division should be computed with the
+	 * high speed transmission counter timeout and byte lane...
+	 */
+	dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVISION(10) |
+		  TX_ESC_CLK_DIVISION(esc_clk_division));
+}
+
+static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
+				   const struct drm_display_mode *mode)
+{
+	u32 val = 0, color = 0;
+
+	switch (dsi->format) {
+	case MIPI_DSI_FMT_RGB888:
+		color = DPI_COLOR_CODING_24BIT;
+		break;
+	case MIPI_DSI_FMT_RGB666:
+		color = DPI_COLOR_CODING_18BIT_2 | LOOSELY18_EN;
+		break;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+		color = DPI_COLOR_CODING_18BIT_1;
+		break;
+	case MIPI_DSI_FMT_RGB565:
+		color = DPI_COLOR_CODING_16BIT_1;
+		break;
+	}
+
+	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+		val |= VSYNC_ACTIVE_LOW;
+	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+		val |= HSYNC_ACTIVE_LOW;
+
+	dsi_write(dsi, DSI_DPI_VCID, DPI_VCID(dsi->channel));
+	dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
+	dsi_write(dsi, DSI_DPI_CFG_POL, val);
+}
+
+static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
+{
+	dsi_write(dsi, DSI_PCKHDL_CFG, CRC_RX_EN | ECC_RX_EN | BTA_EN);
+}
+
+static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
+					    const struct drm_display_mode *mode)
+{
+	/*
+	 * TODO dw drv improvements
+	 * only burst mode is supported here. For non-burst video modes,
+	 * we should compute DSI_VID_PKT_SIZE, DSI_VCCR.NUMC &
+	 * DSI_VNPCR.NPSIZE... especially because this driver supports
+	 * non-burst video modes, see dw_mipi_dsi_video_mode_config()...
+	 */
+
+	dsi_write(dsi, DSI_VID_PKT_SIZE,
+		       dw_mipi_is_dual_mode(dsi) ?
+				VID_PKT_SIZE(mode->hdisplay / 2) :
+				VID_PKT_SIZE(mode->hdisplay));
+}
+
+static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
+{
+	/*
+	 * TODO dw drv improvements
+	 * compute high speed transmission counter timeout according
+	 * to the timeout clock division (TO_CLK_DIVISION) and byte lane...
+	 */
+	dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
+	/*
+	 * TODO dw drv improvements
+	 * the Bus-Turn-Around Timeout Counter should be computed
+	 * according to byte lane...
+	 */
+	dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00);
+	dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
+}
+
+/* Get lane byte clock cycles. */
+static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
+					   const struct drm_display_mode *mode,
+					   u32 hcomponent)
+{
+	u32 frac, lbcc;
+
+	lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
+
+	frac = lbcc % mode->clock;
+	lbcc = lbcc / mode->clock;
+	if (frac)
+		lbcc++;
+
+	return lbcc;
+}
+
+static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi,
+					  const struct drm_display_mode *mode)
+{
+	u32 htotal, hsa, hbp, lbcc;
+
+	htotal = mode->htotal;
+	hsa = mode->hsync_end - mode->hsync_start;
+	hbp = mode->htotal - mode->hsync_end;
+
+	/*
+	 * TODO dw drv improvements
+	 * computations below may be improved...
+	 */
+	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, htotal);
+	dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
+
+	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hsa);
+	dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
+
+	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hbp);
+	dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
+}
+
+static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi,
+					const struct drm_display_mode *mode)
+{
+	u32 vactive, vsa, vfp, vbp;
+
+	vactive = mode->vdisplay;
+	vsa = mode->vsync_end - mode->vsync_start;
+	vfp = mode->vsync_start - mode->vdisplay;
+	vbp = mode->vtotal - mode->vsync_end;
+
+	dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive);
+	dsi_write(dsi, DSI_VID_VSA_LINES, vsa);
+	dsi_write(dsi, DSI_VID_VFP_LINES, vfp);
+	dsi_write(dsi, DSI_VID_VBP_LINES, vbp);
+}
+
+static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
+{
+	const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
+	struct dw_mipi_dsi_dphy_timing timing;
+	u32 hw_version;
+	int ret;
+
+	ret = phy_ops->get_timing(dsi->plat_data->priv_data,
+				  dsi->lane_mbps, &timing);
+	if (ret)
+		DRM_DEV_ERROR(dsi->dev, "Retrieving phy timings failed\n");
+
+	/*
+	 * TODO dw drv improvements
+	 * data & clock lane timers should be computed according to panel
+	 * blankings and to the automatic clock lane control mode...
+	 * note: DSI_PHY_TMR_CFG.MAX_RD_TIME should be in line with
+	 * DSI_CMD_MODE_CFG.MAX_RD_PKT_SIZE_LP (see CMD_MODE_ALL_LP)
+	 */
+
+	hw_version = dsi_read(dsi, DSI_VERSION) & VERSION;
+
+	if (hw_version >= HWVER_131) {
+		dsi_write(dsi, DSI_PHY_TMR_CFG,
+			  PHY_HS2LP_TIME_V131(timing.data_hs2lp) |
+			  PHY_LP2HS_TIME_V131(timing.data_lp2hs));
+		dsi_write(dsi, DSI_PHY_TMR_RD_CFG, MAX_RD_TIME_V131(10000));
+	} else {
+		dsi_write(dsi, DSI_PHY_TMR_CFG,
+			  PHY_HS2LP_TIME(timing.data_hs2lp) |
+			  PHY_LP2HS_TIME(timing.data_lp2hs) |
+			  MAX_RD_TIME(10000));
+	}
+
+	dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG,
+		  PHY_CLKHS2LP_TIME(timing.clk_hs2lp) |
+		  PHY_CLKLP2HS_TIME(timing.clk_lp2hs));
+}
+
+static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi)
+{
+	/*
+	 * TODO dw drv improvements
+	 * stop wait time should be the maximum between host dsi
+	 * and panel stop wait times
+	 */
+	dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) |
+		  N_LANES(dsi->lanes));
+}
+
+static void dw_mipi_dsi_dphy_init(struct dw_mipi_dsi *dsi)
+{
+	/* Clear PHY state */
+	dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
+		  | PHY_RSTZ | PHY_SHUTDOWNZ);
+	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
+	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLR);
+	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
+}
+
+static void dw_mipi_dsi_dphy_enable(struct dw_mipi_dsi *dsi)
+{
+	u32 val;
+	int ret;
+
+	dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
+		  PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
+
+	ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS, val,
+				 val & PHY_LOCK, 1000, PHY_STATUS_TIMEOUT_US);
+	if (ret)
+		DRM_DEBUG_DRIVER("failed to wait phy lock state\n");
+
+	ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS,
+				 val, val & PHY_STOP_STATE_CLK_LANE, 1000,
+				 PHY_STATUS_TIMEOUT_US);
+	if (ret)
+		DRM_DEBUG_DRIVER("failed to wait phy clk lane stop state\n");
+}
+
+static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
+{
+	dsi_read(dsi, DSI_INT_ST0);
+	dsi_read(dsi, DSI_INT_ST1);
+	dsi_write(dsi, DSI_INT_MSK0, 0);
+	dsi_write(dsi, DSI_INT_MSK1, 0);
+}
+
+static void dw_mipi_dsi_bridge_post_atomic_disable(struct drm_bridge *bridge,
+						   struct drm_bridge_state *old_bridge_state)
+{
+	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
+	const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
+
+	/*
+	 * Switch to command mode before panel-bridge post_disable &
+	 * panel unprepare.
+	 * Note: panel-bridge disable & panel disable has been called
+	 * before by the drm framework.
+	 */
+	dw_mipi_dsi_set_mode(dsi, 0);
+
+	/*
+	 * TODO Only way found to call panel-bridge post_disable &
+	 * panel unprepare before the dsi "final" disable...
+	 * This needs to be fixed in the drm_bridge framework and the API
+	 * needs to be updated to manage our own call chains...
+	 */
+	if (dsi->panel_bridge->funcs->post_disable)
+		dsi->panel_bridge->funcs->post_disable(dsi->panel_bridge);
+
+	if (phy_ops->power_off)
+		phy_ops->power_off(dsi->plat_data->priv_data);
+
+	if (dsi->slave) {
+		dw_mipi_dsi_disable(dsi->slave);
+		clk_disable_unprepare(dsi->slave->pclk);
+		pm_runtime_put(dsi->slave->dev);
+	}
+	dw_mipi_dsi_disable(dsi);
+
+	clk_disable_unprepare(dsi->pclk);
+	pm_runtime_put(dsi->dev);
+}
+
+static unsigned int dw_mipi_dsi_get_lanes(struct dw_mipi_dsi *dsi)
+{
+	/* this instance is the slave, so add the master's lanes */
+	if (dsi->master)
+		return dsi->master->lanes + dsi->lanes;
+
+	/* this instance is the master, so add the slave's lanes */
+	if (dsi->slave)
+		return dsi->lanes + dsi->slave->lanes;
+
+	/* single-dsi, so no other instance to consider */
+	return dsi->lanes;
+}
+
+static void dw_mipi_dsi_mode_set(struct dw_mipi_dsi *dsi,
+				 const struct drm_display_mode *adjusted_mode)
+{
+	const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
+	void *priv_data = dsi->plat_data->priv_data;
+	int ret;
+	u32 lanes = dw_mipi_dsi_get_lanes(dsi);
+
+	clk_prepare_enable(dsi->pclk);
+
+	ret = phy_ops->get_lane_mbps(priv_data, adjusted_mode, dsi->mode_flags,
+				     lanes, dsi->format, &dsi->lane_mbps);
+	if (ret)
+		DRM_DEBUG_DRIVER("Phy get_lane_mbps() failed\n");
+
+	pm_runtime_get_sync(dsi->dev);
+	dw_mipi_dsi_init(dsi);
+	dw_mipi_dsi_dpi_config(dsi, adjusted_mode);
+	dw_mipi_dsi_packet_handler_config(dsi);
+	dw_mipi_dsi_video_mode_config(dsi);
+	dw_mipi_dsi_video_packet_config(dsi, adjusted_mode);
+	dw_mipi_dsi_command_mode_config(dsi);
+	dw_mipi_dsi_line_timer_config(dsi, adjusted_mode);
+	dw_mipi_dsi_vertical_timing_config(dsi, adjusted_mode);
+
+	dw_mipi_dsi_dphy_init(dsi);
+	dw_mipi_dsi_dphy_timing_config(dsi);
+	dw_mipi_dsi_dphy_interface_config(dsi);
+
+	dw_mipi_dsi_clear_err(dsi);
+
+	ret = phy_ops->init(priv_data);
+	if (ret)
+		DRM_DEBUG_DRIVER("Phy init() failed\n");
+
+	dw_mipi_dsi_dphy_enable(dsi);
+
+	dw_mipi_dsi_wait_for_two_frames(adjusted_mode);
+
+	/* Switch to cmd mode for panel-bridge pre_enable & panel prepare */
+	dw_mipi_dsi_set_mode(dsi, 0);
+
+	if (phy_ops->power_on)
+		phy_ops->power_on(dsi->plat_data->priv_data);
+}
+
+static void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge,
+					const struct drm_display_mode *mode,
+					const struct drm_display_mode *adjusted_mode)
+{
+	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
+
+	dw_mipi_dsi_mode_set(dsi, adjusted_mode);
+	if (dsi->slave)
+		dw_mipi_dsi_mode_set(dsi->slave, adjusted_mode);
+}
+
+static void dw_mipi_dsi_bridge_atomic_enable(struct drm_bridge *bridge,
+					     struct drm_bridge_state *old_bridge_state)
+{
+	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
+
+	/* Switch to video mode for panel-bridge enable & panel enable */
+	dw_mipi_dsi_set_mode(dsi, MIPI_DSI_MODE_VIDEO);
+	if (dsi->slave)
+		dw_mipi_dsi_set_mode(dsi->slave, MIPI_DSI_MODE_VIDEO);
+}
+
+static enum drm_mode_status
+dw_mipi_dsi_bridge_mode_valid(struct drm_bridge *bridge,
+			      const struct drm_display_info *info,
+			      const struct drm_display_mode *mode)
+{
+	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
+	const struct dw_mipi_dsi_plat_data *pdata = dsi->plat_data;
+	enum drm_mode_status mode_status = MODE_OK;
+
+	if (pdata->mode_valid)
+		mode_status = pdata->mode_valid(pdata->priv_data, mode,
+						dsi->mode_flags,
+						dw_mipi_dsi_get_lanes(dsi),
+						dsi->format);
+
+	return mode_status;
+}
+
+static int dw_mipi_dsi_bridge_attach(struct drm_bridge *bridge,
+				     enum drm_bridge_attach_flags flags)
+{
+	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
+
+	if (!bridge->encoder) {
+		DRM_ERROR("Parent encoder object not found\n");
+		return -ENODEV;
+	}
+
+	/* Set the encoder type as caller does not know it */
+	bridge->encoder->encoder_type = DRM_MODE_ENCODER_DSI;
+
+	/* Attach the panel-bridge to the dsi bridge */
+	return drm_bridge_attach(bridge->encoder, dsi->panel_bridge, bridge,
+				 flags);
+}
+
+static const struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
+	.atomic_duplicate_state	= drm_atomic_helper_bridge_duplicate_state,
+	.atomic_destroy_state	= drm_atomic_helper_bridge_destroy_state,
+	.atomic_reset		= drm_atomic_helper_bridge_reset,
+	.atomic_enable		= dw_mipi_dsi_bridge_atomic_enable,
+	.atomic_post_disable	= dw_mipi_dsi_bridge_post_atomic_disable,
+	.mode_set		= dw_mipi_dsi_bridge_mode_set,
+	.mode_valid		= dw_mipi_dsi_bridge_mode_valid,
+	.attach			= dw_mipi_dsi_bridge_attach,
+};
+
+#ifdef CONFIG_DEBUG_FS
+
+static int dw_mipi_dsi_debugfs_write(void *data, u64 val)
+{
+	struct debugfs_entries *vpg = data;
+	struct dw_mipi_dsi *dsi;
+	u32 mode_cfg;
+
+	if (!vpg)
+		return -ENODEV;
+
+	dsi = vpg->dsi;
+
+	*vpg->reg = (bool)val;
+
+	mode_cfg = dsi_read(dsi, DSI_VID_MODE_CFG);
+
+	if (*vpg->reg)
+		mode_cfg |= vpg->mask;
+	else
+		mode_cfg &= ~vpg->mask;
+
+	dsi_write(dsi, DSI_VID_MODE_CFG, mode_cfg);
+
+	return 0;
+}
+
+static int dw_mipi_dsi_debugfs_show(void *data, u64 *val)
+{
+	struct debugfs_entries *vpg = data;
+
+	if (!vpg)
+		return -ENODEV;
+
+	*val = *vpg->reg;
+
+	return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(fops_x32, dw_mipi_dsi_debugfs_show,
+			 dw_mipi_dsi_debugfs_write, "%llu\n");
+
+static void debugfs_create_files(void *data)
+{
+	struct dw_mipi_dsi *dsi = data;
+	struct debugfs_entries debugfs[] = {
+		REGISTER(vpg, VID_MODE_VPG_ENABLE, dsi),
+		REGISTER(vpg_horizontal, VID_MODE_VPG_HORIZONTAL, dsi),
+		REGISTER(vpg_ber_pattern, VID_MODE_VPG_MODE, dsi),
+	};
+	int i;
+
+	dsi->debugfs_vpg = kmemdup(debugfs, sizeof(debugfs), GFP_KERNEL);
+	if (!dsi->debugfs_vpg)
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(debugfs); i++)
+		debugfs_create_file(dsi->debugfs_vpg[i].name, 0644,
+				    dsi->debugfs, &dsi->debugfs_vpg[i],
+				    &fops_x32);
+}
+
+static void dw_mipi_dsi_debugfs_init(struct dw_mipi_dsi *dsi)
+{
+	dsi->debugfs = debugfs_create_dir(dev_name(dsi->dev), NULL);
+	if (IS_ERR(dsi->debugfs)) {
+		dev_err(dsi->dev, "failed to create debugfs root\n");
+		return;
+	}
+
+	debugfs_create_files(dsi);
+}
+
+static void dw_mipi_dsi_debugfs_remove(struct dw_mipi_dsi *dsi)
+{
+	debugfs_remove_recursive(dsi->debugfs);
+	kfree(dsi->debugfs_vpg);
+}
+
+#else
+
+static void dw_mipi_dsi_debugfs_init(struct dw_mipi_dsi *dsi) { }
+static void dw_mipi_dsi_debugfs_remove(struct dw_mipi_dsi *dsi) { }
+
+#endif /* CONFIG_DEBUG_FS */
+
+static struct dw_mipi_dsi *
+__dw_mipi_dsi_probe(struct platform_device *pdev,
+		    const struct dw_mipi_dsi_plat_data *plat_data)
+{
+	struct device *dev = &pdev->dev;
+	struct reset_control *apb_rst;
+	struct dw_mipi_dsi *dsi;
+	int ret;
+
+	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+	if (!dsi)
+		return ERR_PTR(-ENOMEM);
+
+	dsi->dev = dev;
+	dsi->plat_data = plat_data;
+
+	if (!plat_data->phy_ops->init || !plat_data->phy_ops->get_lane_mbps ||
+	    !plat_data->phy_ops->get_timing) {
+		DRM_ERROR("Phy not properly configured\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	if (!plat_data->base) {
+		dsi->base = devm_platform_ioremap_resource(pdev, 0);
+		if (IS_ERR(dsi->base))
+			return ERR_PTR(-ENODEV);
+
+	} else {
+		dsi->base = plat_data->base;
+	}
+
+	dsi->pclk = devm_clk_get(dev, "pclk");
+	if (IS_ERR(dsi->pclk)) {
+		ret = PTR_ERR(dsi->pclk);
+		dev_err(dev, "Unable to get pclk: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	/*
+	 * Note that the reset was not defined in the initial device tree, so
+	 * we have to be prepared for it not being found.
+	 */
+	apb_rst = devm_reset_control_get_optional_exclusive(dev, "apb");
+	if (IS_ERR(apb_rst)) {
+		ret = PTR_ERR(apb_rst);
+
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Unable to get reset control: %d\n", ret);
+
+		return ERR_PTR(ret);
+	}
+
+	if (apb_rst) {
+		ret = clk_prepare_enable(dsi->pclk);
+		if (ret) {
+			dev_err(dev, "%s: Failed to enable pclk\n", __func__);
+			return ERR_PTR(ret);
+		}
+
+		reset_control_assert(apb_rst);
+		usleep_range(10, 20);
+		reset_control_deassert(apb_rst);
+
+		clk_disable_unprepare(dsi->pclk);
+	}
+
+	dw_mipi_dsi_debugfs_init(dsi);
+	pm_runtime_enable(dev);
+
+	dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
+	dsi->dsi_host.dev = dev;
+	ret = mipi_dsi_host_register(&dsi->dsi_host);
+	if (ret) {
+		dev_err(dev, "Failed to register MIPI host: %d\n", ret);
+		pm_runtime_disable(dev);
+		dw_mipi_dsi_debugfs_remove(dsi);
+		return ERR_PTR(ret);
+	}
+
+	dsi->bridge.driver_private = dsi;
+	dsi->bridge.funcs = &dw_mipi_dsi_bridge_funcs;
+#ifdef CONFIG_OF
+	dsi->bridge.of_node = pdev->dev.of_node;
+#endif
+
+	return dsi;
+}
+
+static void __dw_mipi_dsi_remove(struct dw_mipi_dsi *dsi)
+{
+	mipi_dsi_host_unregister(&dsi->dsi_host);
+
+	pm_runtime_disable(dsi->dev);
+	dw_mipi_dsi_debugfs_remove(dsi);
+}
+
+void dw_mipi_dsi_set_slave(struct dw_mipi_dsi *dsi, struct dw_mipi_dsi *slave)
+{
+	/* introduce controllers to each other */
+	dsi->slave = slave;
+	dsi->slave->master = dsi;
+
+	/* migrate settings for already attached displays */
+	dsi->slave->lanes = dsi->lanes;
+	dsi->slave->channel = dsi->channel;
+	dsi->slave->format = dsi->format;
+	dsi->slave->mode_flags = dsi->mode_flags;
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_set_slave);
+
+/*
+ * Probe/remove API, used from platforms based on the DRM bridge API.
+ */
+struct dw_mipi_dsi *
+dw_mipi_dsi_probe(struct platform_device *pdev,
+		  const struct dw_mipi_dsi_plat_data *plat_data)
+{
+	return __dw_mipi_dsi_probe(pdev, plat_data);
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_probe);
+
+void dw_mipi_dsi_remove(struct dw_mipi_dsi *dsi)
+{
+	__dw_mipi_dsi_remove(dsi);
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_remove);
+
+/*
+ * Bind/unbind API, used from platforms based on the component framework.
+ */
+int dw_mipi_dsi_bind(struct dw_mipi_dsi *dsi, struct drm_encoder *encoder)
+{
+	return drm_bridge_attach(encoder, &dsi->bridge, NULL, 0);
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_bind);
+
+void dw_mipi_dsi_unbind(struct dw_mipi_dsi *dsi)
+{
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_unbind);
+
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>");
+MODULE_DESCRIPTION("DW MIPI DSI host controller driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:dw-mipi-dsi");